Download or read book Management of Legionella in Water Systems written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2020-02-20 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Legionnaires' disease, a pneumonia caused by the Legionella bacterium, is the leading cause of reported waterborne disease outbreaks in the United States. Legionella occur naturally in water from many different environmental sources, but grow rapidly in the warm, stagnant conditions that can be found in engineered water systems such as cooling towers, building plumbing, and hot tubs. Humans are primarily exposed to Legionella through inhalation of contaminated aerosols into the respiratory system. Legionnaires' disease can be fatal, with between 3 and 33 percent of Legionella infections leading to death, and studies show the incidence of Legionnaires' disease in the United States increased five-fold from 2000 to 2017. Management of Legionella in Water Systems reviews the state of science on Legionella contamination of water systems, specifically the ecology and diagnosis. This report explores the process of transmission via water systems, quantification, prevention and control, and policy and training issues that affect the incidence of Legionnaires' disease. It also analyzes existing knowledge gaps and recommends research priorities moving forward.
Download or read book Chlorine Dioxide gas written by Stuart Dobson and published by . This book was released on 2002 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chlorine dioxide (ClO2) exists as a greenish yellow to orange gas at room temperature. It is used in the paper and pulp bleaching industries as a sterilizing agent, in hospitals as a biocide in water treatment, and as an improving agent in flour. This document focuses on exposures via routes relevant to occupational settings principally related to the production of chlorine dioxide, but also contains environmental information. The health effects and environmental fate and effects of chlorine dioxide used in the treatment of drinking-water, together with those of halogenated organics produced by the interaction between the disinfectant and other materials present in the water are covered in a recent Environmental Health Criteria publication (EHC No. 216 2000) and are not dealt with in detail here. Chlorine dioxide is an irritant and it seems likely that health effects would be restricted to local responses. The few ecotoxicity data available show that chlorine dioxide can be highly toxic to aquatic organisms.
Download or read book Iodine Chemistry and Applications written by Tatsuo Kaiho and published by John Wiley & Sons. This book was released on 2014-10-09 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively covers iodine, its chemistry, and its role in functional materials, reagents, and compounds. • Provides an up-to-date, detailed overview of iodine chemistry with discussion on elemental aspects: characteristics, properties, iodides, and halogen bonding • Acts as a useful guide for readers to learn how to synthesize complex compounds using iodine reagents or intermediates • Describes traditional and modern processing techniques, such as starch, cupper, blowing out, and ion exchange resin methods • Includes seven detailed sections devoted to the applications of iodine: Characteristics, Production, Synthesis, Biological Applications, Industrial Applications, Bioorganic Chemistry and Environmental Chemistry, and Radioisotopes • Features hot topics in the field, such as hypervalent iodine-mediated cross coupling reactions, agrochemicals, dye sensitized solar cells, and therapeutic agents
Download or read book Handbook for cleaning decontamination of surfaces written by Ingegard Johansson and published by Elsevier. This book was released on 2007-06-20 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of Handbook for Cleaning/Decontamination of Surfaces lies on cleaning and decontamination of surfaces and solid matter, hard as well as soft. Bringing together in a 2-volume reference source: - current knowledge of the physico-chemical fundamentals underlying the cleaning process; - the different needs for cleaning and how these needs are met by various types of cleaning processes and cleaning agents, including novel approaches; - how to test that cleaning has taken place and to what extent; - the effects of cleaning on the environment; - future trends in cleaning and decontamination, for example the idea of changing surfaces, to hinder the absorbance of dirt and thus make cleaning easier.A brief introduction is given to the legal demands concerning the environment and a historical background, in terms of development of detergents, from soaps to the modern sophisticated formulations. Bactericides, their use and the environmental demands on them are covered. Thorough discussions of mechanisms for cleaning are given in several chapters, both general basic concepts and special cases like particle cleaning and cleaning using microemulsion concepts.* General understanding of how cleaning works, function of ingredients and formulations * Overview of environmental issues and demands from the society in the area * Gives basic formulas for cleaning preparations in most areas
Download or read book Hazardous Gases written by Jaspal Singh and published by Academic Press. This book was released on 2021-07-17 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hazardous Gases: Risk Assessment on Environment and Human Health examines all relevant routes of exposure, inhalation, skin absorption and ingestion, and control measures of specifics hazardous gases resulting from workplace exposure from industrial processes, traffic fumes, and the degradation of waste materials and how they impacts the health and environment of workers. The book examines the risk assessment and effect of poisonous gases on the environment human health. It also covers necessary emergency guidelines, safety measures, physiological impact, hazard control measures, handling and storage of hazardous gases. Each chapter is formatted to include an introduction, historical background, physicochemical properties, physiological role discussing mechanisms of toxicity, its effect on human health as well as environment, followed by case studies and recent research on toxic gases. Hazardous Gases: Risk Assessment on Environment and Human Health is a helpful resource for academics and researchers in toxicology, occupational health and safety, and environmental sciences as well as those in the field who work to assess and mitigate the impact of toxic gases on the work environment and the health of the workforce. - Emphasizes the environmental monitoring in the workplace of hazardous materials - Includes all relevant storage and handling information required for detailing all personnel on the hazards and risks from the substances with which they work - Offers practical examples and case studies related to toxic gases and their impact on health
Download or read book Antisepsis Disinfection and Sterilization written by Gerald E. McDonnell and published by John Wiley & Sons. This book was released on 2020-07-10 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Antisepsis, Disinfection, and Sterilization: Types, Action, and Resistance, by Gerald E. McDonnell, is a detailed and accessible presentation of the current methods of microbial control. Each major category, such as physical disinfection methods, is given a chapter, in which theory, spectrum of activity, advantages, disadvantages, and modes of action of the methods are thoroughly and clearly presented. Sufficient background on the life cycles and general anatomy of microorganisms is provided so that the reader who is new to microbiology will better appreciate how physical and chemical biocides work their magic on microbes. Other topics in the book include: Evaluating the efficacy of chemical antiseptics and disinfectants, and of physical methods of microbial control and sterilization. Understanding how to choose the proper biocidal product and process for specific applications. Classic physical and chemical disinfection methods, such as heat, cold, non-ionizing radiation, acids, oxidizing agents, and metals. Newer chemical disinfectants, including, isothiazolones, micro-and nano-particles, and bacteriophages as control agents. Antisepsis of skin and wounds and the biocides that can be used as antiseptics. Classic methods of physical sterilization, such as, moist heat and dry heat sterilization, ionizing radiation, and filtration, along with newer methods, including, the use of plasma or pulsed light. Chemical sterilization methods that use ethylene oxide, formaldehyde, or a variety of other oxidizing agents. A detailed look at the modes of action of biocides in controlling microbial growth and disrupting microbial physiology. Mechanisms that microorganisms use to resist the effects of biocides. The second edition of Antisepsis, Disinfection, and Sterilization: Types, Action, and Resistance is well suited as a textbook and is outstanding as a reference book for facilities managers and application engineers in manufacturing plants, hospitals, and food production facilities. It is also essential for public health officials, healthcare professionals, and infection control practitioners.
Download or read book Disasters and Public Health written by Bruce W. Clements and published by Butterworth-Heinemann. This book was released on 2016-02-23 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Disasters and Public Health: Planning and Response, Second Edition, examines the critical intersection between emergency management and public health. It provides a succinct overview of the actions that may be taken before, during, and after a major public health emergency or disaster to reduce morbidity and mortality. Five all-new chapters at the beginning of the book describe how policy and law drive program structures and strategies leading to the establishment and maintenance of preparedness capabilities. New topics covered in this edition include disaster behavioral health, which is often the most expensive and longest-term recovery challenge in a public health emergency, and community resilience, a valuable resource upon which most emergency programs and responses depend. The balance of the book provides an in-depth review of preparedness, response, and recovery challenges for 15 public health threats. These chapters also provide lessons learned from responses to each threat, giving users a well-rounded introduction to public health preparedness and response that is rooted in experience and practice. - Contains seven new chapters that cover law, vulnerable populations, behavioral health, community resilience, preparedness capabilities, emerging and re-emerging infectious diseases, and foodborne threats - Provides clinical updates by new MD co-author - Includes innovative preparedness approaches and lessons learned from current and historic public health and medical responses that enhance clarity and provide valuable examples to readers - Presents increased international content and case studies for a global perspective on public health
Download or read book Microbial Decontamination in the Food Industry written by Ali Demirci and published by Elsevier. This book was released on 2012-06-26 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problem of creating microbiologically-safe food with an acceptable shelf-life and quality for the consumer is a constant challenge for the food industry. Microbial decontamination in the food industry provides a comprehensive guide to the decontamination problems faced by the industry, and the current and emerging methods being used to solve them.Part one deals with various food commodities such as fresh produce, meats, seafood, nuts, juices and dairy products, and provides background on contamination routes and outbreaks as well as proposed processing methods for each commodity. Part two goes on to review current and emerging non-chemical and non-thermal decontamination methods such as high hydrostatic pressure, pulsed electric fields, irradiation, power ultrasound and non-thermal plasma. Thermal methods such as microwave, radio-frequency and infrared heating and food surface pasteurization are also explored in detail. Chemical decontamination methods with ozone, chlorine dioxide, electrolyzed oxidizing water, organic acids and dense phase CO2 are discussed in part three. Finally, part four focuses on current and emerging packaging technologies and post-packaging decontamination.With its distinguished editors and international team of expert contributors, Microbial decontamination in the food industry is an indispensable guide for all food industry professionals involved in the design or use of novel food decontamination techniques, as well as any academics researching or teaching this important subject. - Provides a comprehensive guide to the decontamination problems faced by the industry and outlines the current and emerging methods being used to solve them - Details backgrounds on contamination routes and outbreaks, as well as proposed processing methods for various commodities including fresh produce, meats, seafood, nuts, juices and dairy products - Sections focus on emerging non-chemical and non-thermal decontamination methods, current thermal methods, chemical decontamination methods and current and emerging packaging technologies and post-packaging decontamination
Download or read book Fundamentals of Toxicology written by PK Gupta and published by Academic Press. This book was released on 2016-08-26 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Toxicology: Essential Concepts and Applications provides a crisp, easy-to-understand overview of the most important concepts, applications, and ideas needed to learn the basics of toxicology. Written by a pre-eminent toxicologist with over five decades of teaching experience, this comprehensive resource offers the hands-on knowledge needed for a strong foundation in the wide field of toxicology. Fundamentals of Toxicology includes a clear structure divided into five units to assist learning and understanding. The first unit provides extensive coverage on the background of toxicology including commonly used definitions and historical perspective, while following units cover: basic concepts; regulatory requirements and good laboratory practices, including types of toxicology testing and evaluation; toxic agents and adverse effects on health; and analytical, forensic, and diagnostic toxicology. This is an essential book for advanced students in toxicology and across the biomedical sciences, life sciences, and environmental sciences who want to learn the concepts of toxicology, as well as early researchers needing to refresh outside of their specialty. - Explains the essential concepts of toxicology in a clear fashion - Provides in-depth coverage of testing protocols, common drugs, chemicals, and laboratory-based diagnostic and analytical toxicology - Explores the history, foundations, and most recent concepts of toxicology - Serves as an essential reference for advanced students in toxicology and across the biomedical, life, and environmental sciences who want to learn the concepts of toxicology
Download or read book Planning and Designing Research Animal Facilities written by Jack Hessler and published by Academic Press. This book was released on 2011-04-28 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research institutions have or are planning to build, expand and renovate animal research facilities to keep up with the demands of biomedical research caused in part by growth in the use of genetically altered rodents and the upsurge of research in infectious diseases. Properly designed facilities greatly facilitate effective management and high-quality day-to-day animal care that is required to optimally support animal research and testing. There are multiple solutions to address the myriad of factors that influence the design and construction of animal research facilities. There is no "best design applicable for all facilities and arguably not even a single "best design for a given facility. For this reason, Planning and Designing Research Animal Facilities is not intended to be a "how to book. The goal is to cover the basic programmatic requirements of animal research facilities, provide ideas for meeting those requirements while, hopefully, stimulating the creative process in which designers in consultation with those who work in animal research facilities generate even better ideas. That is how progress has been made and will continue to be made. - Facilitates communication between the parties involved in planning and designing animal facilities by providing contemporary information, and stimulating creativity that will help lead to wise decisions and advance the knowledge base for planning, design and constructing animal research facilities
Download or read book EPA 600 9 written by and published by . This book was released on 1975-12 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book History of Modern Clinical Toxicology written by Alan Woolf and published by Academic Press. This book was released on 2021-10-13 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: History of Modern Clinical Toxicology describes the extraordinary advances in the practice of clinical toxicology within the past 70 years and brings together stories of the people – the champions of clinical toxicology - who contributed to these advances, discovered new therapies and antidotes, and made change happen. This book lays out the poison control system they built and the fascinating story of how they created a new and evolving medical specialty. With the participation of renowned international experts as authors, the book showcases the development of poison control centers around the world and the growth of the professional societies that represent and support them today. This book also tells the stories of the modern-day toxic disasters and recent toxic exposures that gained worldwide attention and notoriety. It outlines the public health responses to such calamities which have led to improvements in our understanding of the science and changes in public health policies and regulations to forestall future such events. Finally, the book covers key policies and agencies affecting poison control centers, addresses the challenges facing clinical toxicologists of today, and predicts advances and future innovations in the field. History of Modern Clinical Toxicology is a unique resource that provides the historical and international perspective that will help students, practitioners, scientists, and health policy makers put current issues and methods in perspective. It will help them understand how infrastructure and processes in clinical toxicology have evolved and why poison control systems are configured as they are. - Offers descriptions of the key regulatory advances affecting clinical toxicology - Provides synopses of modern-day poisoning disasters - Outlines the development of modern antidotes and future directions in clinical toxicology - Describes the origins and development of the U.S. poison control system - Includes the origins and features of professional clinical toxicology societies from around the world - Includes descriptions of the history of clinical toxicology and poison control in more than 35 countries
Download or read book Emergency Response Guidebook written by U.S. Department of Transportation and published by Simon and Schuster. This book was released on 2013-06-03 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Does the identification number 60 indicate a toxic substance or a flammable solid, in the molten state at an elevated temperature? Does the identification number 1035 indicate ethane or butane? What is the difference between natural gas transmission pipelines and natural gas distribution pipelines? If you came upon an overturned truck on the highway that was leaking, would you be able to identify if it was hazardous and know what steps to take? Questions like these and more are answered in the Emergency Response Guidebook. Learn how to identify symbols for and vehicles carrying toxic, flammable, explosive, radioactive, or otherwise harmful substances and how to respond once an incident involving those substances has been identified. Always be prepared in situations that are unfamiliar and dangerous and know how to rectify them. Keeping this guide around at all times will ensure that, if you were to come upon a transportation situation involving hazardous substances or dangerous goods, you will be able to help keep others and yourself out of danger. With color-coded pages for quick and easy reference, this is the official manual used by first responders in the United States and Canada for transportation incidents involving dangerous goods or hazardous materials.
Download or read book Chemical biological Implications of Using Chlorine and Ozone for Disinfection written by Robert M. Carlson and published by . This book was released on 1977 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applications of Advanced Oxidation Processes AOPs in Drinking Water Treatment written by Antonio Gil and published by Springer. This book was released on 2018-07-03 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume reviews the drinking water treatments in which AOPs display a high application potential. Firstly it reveals the typical supply sources and limitations of conventional technologies and critically reviews natural organic matter characterization and removal techniques, focusing mainly on AOP treatments. It then explores using AOPs for simultaneous inactivation/disinfection of several types of microorganisms, including highly resistant Cryptosporidium protozoa. Lastly, it discusses relevant miscellaneous topics, like the most promising AOP solid catalysts, the regime change of Fenton-like processes toward continuous reactors, the application of chemometrics for process optimization, the impact on disinfection byproducts and the tracing of toxicity during AOP treatments. This work is a useful reference for researchers and students involved in water technologies, including analytical and environmental chemistry, chemical and environmental engineering, toxicology, biotechnology, and related fields. It is intended to encourage industrial and public-health scientists and decision-makers to accelerate the application of AOPs as technological alternatives for the improvement of drinking water treatment plants.
Download or read book Water Treatment Manual written by and published by . This book was released on 19?? with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Some Chemicals Present in Industrial and Consumer Products Food and Drinking water written by IARC Working Group on the Evaluation of Carcinogenic Risks to Humans and published by IARC Monographs on the Evaluat. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of the IARC Monographs provides an assessment of the carcinogenicity of 18 chemicals present in industrial and consumer products or food (natural constituents, contaminants, or flavorings) or occurring as water-chlorination by-products. The compounds evaluated include the widely used plasticizer di(2-ethylhexyl) phthalate and the food contaminant 4-methylimidazole. In view of the limited agent-specific information available from epidemiological studies, the IARC Monographs Working Group relied mainly on carcinogenicity bioassays, and mechanistic and other relevant data to evaluate the carcinogenic hazards to humans exposed to these agents.
