Download or read book Chemistry of Hydrocarbon Combustion written by David. Hucknall and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scientific and economic importance of the high-temperature reactions of hydrocarbons in both the presence and absence of oxygen cannot be overemphasized. A vast chemical industry exists based on feedstocks produced by the controlled pyrolysis of hydrocarbons, while uncontrolled combustion in air is still among the most important sources of heat and mechanical energy. The detonation and explosion of hydrocarbon-oxidant mixtures can however, be a highly dangerous phenomenon which destroys lives and equipment. In order that control can be exerted over combustion processes, a complete description of hydrocarbon oxidation and pyrolysis is required. A major contribution to this is an understanding of the unstable intermediates involved and their reactions. The aim of this book is to review our knowledge of the chemistry of hydrocarbon combustion and to consider the data which are available for relevant reactions. Chapter 1 describes early studies in which the apparent complexity of the chemistry was established and the type of information required for a better understanding was defined. Experimental studies of the overall process which were carried out with the aim of establishing the sequence of stable chemical intermediates and some of the unstable species are described in Chapter 2. The limited nature of the information thus obtained showed that independent studies of individual reactions involving the unstable species were required. In Chapter 3 investigations specifically aimed at the determination of the kinetics of elementary reactions are discussed.
Download or read book Handbook of Industrial Hydrocarbon Processes written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2010-12-24 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an author with over 38 years of experience in the chemical and petrochemical process industry, this handbook will present an analysis of the process steps used to produce industrial hydrocarbons from various raw materials. It is the first book to offer a thorough analysis of external factors effecting production such as: cost, availability and environmental legislation. An A-Z list of raw materials and their properties are presented along with a commentary regarding their cost and availability. Specific processing operations described in the book include: distillation, thermal cracking and coking, catalytic methods, hydroprocesses, thermal and catalytic reforming, isomerization, alkylation processes, polymerization processes, solvent processes, water removal, fractionation and acid gas removal. - Flow diagrams and descriptions of more than 250 leading-edge process technologies - An analysis of chemical reactions and process steps that are required to produce chemicals from various raw materials - Properties, availability and environmental impact of various raw materials used in hydrocarbon processing
Download or read book The Chemistry of Hydrocarbon Fuels written by Harold H. Schobert and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Chemistry of Hydrocarbon Fuels is concerned with the chemical aspects of hydrofuels such as coal, petroleum, and natural gas. Topics covered include diagenesis and catagenesis, processing of natural gas and petroleum fractions, coal combustion, and chemicals that can be obtained from fuels. This book is comprised of 14 chapters and begins with a comprehensive treatment of the formation of fuels from accumulated organic matter, along with the organic geochemistry of coal, oil, and gas. The following chapters focus on the composition of hydrocarbon fuels and some of their important physical properties. Production and use of synthesis gas, alternate fuels from coal, and oxygenated fuels are considered. The remaining chapters deal with some of the chemistry of separation, refining, and use of hydrocarbon fuels. This monograph is written primarily for practicing scientists and engineers, fuel scientists, petroleum chemists, and those who are new to the field of fuel science and seek an introduction to fuel chemistry.
Download or read book Gas Phase Combustion Chemistry written by W.C., Jr. Gardiner and published by Springer. This book was released on 2012-09-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superseding Gardiner's "Combustion Chemistry", this is an updated, comprehensive coverage of those aspects of combustion chemistry relevant to gas-phase combustion of hydrocarbons. The book includes an extended discussion of air pollutant chemistry and aspects of combustion, and reviews elementary reactions of nitrogen, sulfur and chlorine compounds that are relevant to combustion. Methods of combustion modeling and rate coefficient estimation are presented, as well as access to databases for combustion thermochemistry and modeling.
Download or read book Combustion written by Irvin Glassman and published by Academic Press. This book was released on 2014-12-02 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughout its previous four editions, Combustion has made a very complex subject both enjoyable and understandable to its student readers and a pleasure for instructors to teach. With its clearly articulated physical and chemical processes of flame combustion and smooth, logical transitions to engineering applications, this new edition continues that tradition. Greatly expanded end-of-chapter problem sets and new areas of combustion engineering applications make it even easier for students to grasp the significance of combustion to a wide range of engineering practice, from transportation to energy generation to environmental impacts. Combustion engineering is the study of rapid energy and mass transfer usually through the common physical phenomena of flame oxidation. It covers the physics and chemistry of this process and the engineering applications—including power generation in internal combustion automobile engines and gas turbine engines. Renewed concerns about energy efficiency and fuel costs, along with continued concerns over toxic and particulate emissions, make this a crucial area of engineering. - New chapter on new combustion concepts and technologies, including discussion on nanotechnology as related to combustion, as well as microgravity combustion, microcombustion, and catalytic combustion—all interrelated and discussed by considering scaling issues (e.g., length and time scales) - New information on sensitivity analysis of reaction mechanisms and generation and application of reduced mechanisms - Expanded coverage of turbulent reactive flows to better illustrate real-world applications - Important new sections on stabilization of diffusion flames—for the first time, the concept of triple flames will be introduced and discussed in the context of diffusion flame stabilization
Download or read book Basic Principles of Organic Chemistry written by John D. Roberts and published by . This book was released on 1977 with total page 1596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction what is organic chemistry all about?; Structural organic chemistry the shapes of molecules functional groups; Organic nomenclature; Alkanes; Stereoisomerism of organic molecules; Bonding in organic molecules atomic-orbital models; More on nomenclature compounds other than hydrocarbons; Nucleophilic substitution and elimination reactions; Separation and purification identification of organic compounds by spectroscopic techniques; Alkenes and alkynes. Ionic and radical addition reactions; Alkenes and alkynes; Oxidation and reduction reactions; Acidity or alkynes.
Download or read book Hydrocarbon Fuels written by E. M. Goodger and published by John Wiley & Sons. This book was released on 1975 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tackling Turbulent Flows in Engineering written by Anupam Dewan and published by Springer Science & Business Media. This book was released on 2010-10-23 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emphasis of this book is on engineering aspects of fluid turbulence. The book explains for example how to tackle turbulence in industrial applications. It is useful to several disciplines, such as, mechanical, civil, chemical, aerospace engineers and also to professors, researchers, beginners, under graduates and post graduates. The following issues are emphasized in the book: - Modeling and computations of engineering flows: The author discusses in detail the quantities of interest for engineering turbulent flows and how to select an appropriate turbulence model; Also, a treatment of the selection of appropriate boundary conditions for the CFD simulations is given. - Modeling of turbulent convective heat transfer: This is encountered in several practical situations. It basically needs discussion on issues of treatment of walls and turbulent heat fluxes. - Modeling of buoyancy driven flows, for example, smoke issuing from chimney, pollutant discharge into water bodies, etc
Download or read book Soot Formation in Combustion written by Henning Bockhorn and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soot Formation in Combustion represents an up-to-date overview. The contributions trace back to the 1991 Heidelberg symposium entitled "Mechanism and Models of Soot Formation" and have all been reedited by Prof. Bockhorn in close contact with the original authors. The book gives an easy introduction to the field for newcomers, and provides detailed treatments for the specialists. The following list of contents illustrates the topics under review:
Download or read book Gaseous Detonations written by M.A. Nettleton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: My introduction to the fascinating phenomena associated with detonation waves came through appointments as an external fellow at the Department of Physics, University College of Wales, and at the Department of Mechanical Engineering, University of Leeds. Very special thanks for his accurate guidance through the large body of information on gaseous detonations are due to Professor D. H. Edwards of University College of Wales. Indeed, the onerous task of concisely enumerating the key features of unidimensional theories of detonations was undertaken by him, and Chapter 2 is based on his initial draft. When the text strays to the use of we, it is a deserved acknow ledgement of his contribution. Again, I should like to thank Professor D. Bradley of Leeds University for his enthusiastic encouragement of my efforts at developing a model of the composition limits of detonability through a relationship between run-up distance and composition of the mixture. The text has been prepared in the context of these fellowships, and I am grateful to the Central Electricity Generating Board for its permission to accept these appointments.
Download or read book Fundamentals of Combustion Processes written by Sara McAllister and published by Springer Science & Business Media. This book was released on 2011-05-10 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Combustion Processes is designed as a textbook for an upper-division undergraduate and graduate level combustion course in mechanical engineering. The authors focus on the fundamental theory of combustion and provide a simplified discussion of basic combustion parameters and processes such as thermodynamics, chemical kinetics, ignition, diffusion and pre-mixed flames. The text includes exploration of applications, example exercises, suggested homework problems and videos of laboratory demonstrations
Download or read book Combustion written by J. Warnatz and published by Springer Science & Business Media. This book was released on 2006-09-23 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a rigorous treatment of the coupling of chemical reactions and fluid flow. Combustion-specific topics of chemistry and fluid mechanics are considered and tools described for the simulation of combustion processes. This edition is completely restructured. Mathematical Formulae and derivations as well as the space-consuming reaction mechanisms have been replaced from the text to appendix. A new chapter discusses the impact of combustion processes on the atmosphere, the chapter on auto-ignition is extended to combustion in Otto- and Diesel-engines, and the chapters on heterogeneous combustion and on soot formation are heavily revised.
Download or read book Handbook of Fire and Explosion Protection Engineering Principles written by Dennis P. Nolan and published by William Andrew. This book was released on 2014-05-28 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an engineer for engineers, this book is both training manual and on-going reference, bringing together all the different facets of the complex processes that must be in place to minimize the risk to people, plant and the environment from fires, explosions, vapour releases and oil spills. Fully compliant with international regulatory requirements, relatively compact but comprehensive in its coverage, engineers, safety professionals and concerned company management will buy this book to capitalize on the author's life-long expertise. This is the only book focusing specifically on oil and gas and related chemical facilities. This new edition includes updates on management practices, lessons learned from recent incidents, and new material on chemical processes, hazards and risk reviews (e.g. CHAZOP). Latest technology on fireproofing, fire and gas detection systems and applications is also covered. An introductory chapter on the philosophy of protection principles along with fundamental background material on the properties of the chemicals concerned and their behaviours under industrial conditions, combined with a detailed section on modern risk analysis techniques makes this book essential reading for students and professionals following Industrial Safety, Chemical Process Safety and Fire Protection Engineering courses. - A practical, results-oriented manual for practicing engineers, bringing protection principles and chemistry together with modern risk analysis techniques - Specific focus on oil and gas and related chemical facilities, making it comprehensive and compact - Includes the latest best practice guidance, as well as lessons learned from recent incidents
Download or read book Polymer Green Flame Retardants written by Constantine D. Papaspyrides and published by Newnes. This book was released on 2014-08-14 with total page 943 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Green Flame Retardants covers key issues regarding the response of polymers during fire, the mechanisms of their flame retardation, the regulations imposed on their use, and the health hazards arising from their combustion. Presenting the latest research developments, the book focuses in particular on nanocomposites, believed to be the most promising approach for producing physically superior materials with low flammability and ecological impact. The fire properties of nanocomposites of various matrixes and fillers are discussed, the toxicological characteristics of these materials are analyzed, addressing also their environmental sustainability. Edited by distinguished scientists, including an array of international industry and academia experts, this book will appeal to chemical, mechanical, environmental, material and process engineers, upper-level undergraduate and graduate students in these disciplines, and generally to researchers developing commercially attractive and environmentally friendly fire-proof products. - Provides recent findings on the manufacture of environmentally sustainable flame retardant polymeric materials - Covers legislation and regulations concerning flame retarded polymeric material use - Includes tables containing the fire properties of the most common polymeric materials
Download or read book Combustion Physics written by Michael A. Liberman and published by Springer Nature. This book was released on 2021-11-14 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the latest achievements and original research work in physics of combustion processes and application of the methods developed in combustion physics for astrophysical problems of stars burning, supernovae explosions and a confined thermonuclear fusion. All the materials in the book are presented in a concise and easily accessible way, but at the same time provides a deep physical inside in the phenomena considered. It is an effective theoretical course with the direct practical implications in engineering fields of engine’s development, energy production, safety issues inherent to terrestrial combustion, as well as in thermonuclear combustion in the inertial fusion. This book is aimed at university students, Ph.D. students and engineers, as well as professionals in combustion, energy-related research, astrophysics and researchers in neighboring fields.
Download or read book How Tobacco Smoke Causes Disease written by United States. Public Health Service. Office of the Surgeon General and published by . This book was released on 2010 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report considers the biological and behavioral mechanisms that may underlie the pathogenicity of tobacco smoke. Many Surgeon General's reports have considered research findings on mechanisms in assessing the biological plausibility of associations observed in epidemiologic studies. Mechanisms of disease are important because they may provide plausibility, which is one of the guideline criteria for assessing evidence on causation. This report specifically reviews the evidence on the potential mechanisms by which smoking causes diseases and considers whether a mechanism is likely to be operative in the production of human disease by tobacco smoke. This evidence is relevant to understanding how smoking causes disease, to identifying those who may be particularly susceptible, and to assessing the potential risks of tobacco products.
Download or read book Hydrocarbon Biorefinery written by Sunil Kumar Maity and published by Elsevier. This book was released on 2021-09-02 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable production of hydrocarbon biofuels from biomass, fuels that are fully compatible with existing internal combustion engines, will allow the global transport economy to transition to a sustainable energy source without the need for capital-intensive new infrastructures. Hydrocarbon Biorefinery: Sustainable Processing of Biomass for Hydrocarbon Biofuels presents a comprehensive and easy to understand consolidation of existing knowledge for the production of hydrocarbon biofuels from biomass. Three major areas for the conversion of biomass to hydrocarbon biofuels are addressed: i) Chemical and thermochemical conversion processes, ii) Biological and biochemical conversion processes, and iii) Conversion processes of biomass-derived compounds. Additionally, the book includes process design, life cycle analysis of various processes, reaction engineering, catalysts, process conditions and process concepts, and is supported with detailed case studies. The economic viability of each process is specifically addressed to provide a clear guide for the economic development of future hydrocarbon biofuels. Hydrocarbon Biorefinery: Sustainable Processing of Biomass for Hydrocarbon Biofuels offers an all-in-one resource for researchers, graduate students, and industry professionals working in the area of bioenergy and will be of interest to energy engineers, chemical engineers, bioengineers, chemists, agricultural researchers, and mechanical engineers. Furthermore, this book provides structured foundational content on biorefineries for undergraduate and graduate students. - Presents fundamental concepts and processes of hydrocarbon biofuel production, covering chemical, biological, and biomass-derived conversion processes - Synthesizes the state-of-the-art research and commercial initiatives of this emerging concept into stand-alone chapters, serving as a structured resource for researchers and practitioners - Emphasizes the process design and economic feasibility of each process using life cycle assessments to support commercial development
