Download or read book Chemistry Involving the Preparation Isolation and Immobilization of Nanocrystalline And or Microcrystalline Boron Arsenide Boron Phosphide Boron Antimonide written by Richard Wells and published by . This book was released on 1997 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: During this report period, publications 1 and 2 (see below) appeared in print (the contents of the papers were reported in two previous "Interim Technical Reports"). Michael Lube prepared the adduct Cl3B. Sb(Sb(SiMe3)3, the third Lewis acid-base adduct of boron and antimony to be structurally characterized. This adduct along with Br3 B. Sb(SiMe3)3 and I3B. Sb(SiMe3)3 are the subject of publication 3 (see below) with the manuscript being written by Michael. Based on the various data obtained, it appeared that the black powders obtained from the thermolysis of these adducts were a mixture of nanocrystalline Sb (hex) and amorphous BSb (data summarized in Michaels's?- PhD. dissertation, 9/6/96, Duke University). Further investigations, on halo-boron-arsenic systems by Michael, with some assistance from Richard Jouet, (see publication 4 below) resulted in the isolation and structural characterization of I3B. As(SiMe3)3, as well as the isolation of X-ray quality crystals of the Cl3B. As(SiMe3)3 I2BAs(SiMe3)22 (preparations previously reported in the 1996 "Interim Technical report").

Download or read book Chemistry Involving the Separation Isolation and Immobilization of Ill V Compound Semiconductor Nanocrystals and Quantum Dots written by and published by . This book was released on 1994 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: The facile thermolysis of Cl2GaP(SiMe3)22 to eliminate Me3 SiX and yield nanocrystalline GaP has been studied via thermal gravimetric analysis (TGA) and it has been found that the Me3SiCl is eliminated in a step-wise manner. Also, the new ternary single-source precursor Ga2(As, P)C13n has been synthesized and thermolyzed to yield the ternary III-V GaAsxPy. In addition, nanocrystalline GaAs and GaP, prepared by the Kher/Wells low temperature solution phase method, have been studied by transmission electron microscopy (TEM) and, in the TEM's of both, the lattice fringes of nanocrystalline material are clearly evident. Using a host of analytical techniques, it has been shown that the GaAs has crystalline regions of 12 + or - 2 nm. In addition, efforts in immobilization of particles have involved all binary permutations of In and Ga phosphides and arsenides. The materials have been cast onto electrode surfaces from volatile solvents to give uniform deposits. Dispersions can also be created in the presence of monomers which are subseqently electropolymerized to prepare composite films. In an STM plot of InAs immobilized in a poly(pyrrole) film, the nanocrystals appear as yellow dots embedded in the brown film, indicating that they extend above the film, and/or have a higher conductivity than the polymer.

Download or read book Characterization of Minerals Metals and Materials 2020 written by Jian Li and published by Springer Nature. This book was released on 2020-01-23 with total page 723 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection gives broad and up-to-date results in the research and development of materials characterization and processing. Topics covered include advanced characterization methods, minerals, mechanical properties, coatings, polymers and composites, corrosion, welding, magnetic materials, and electronic materials. The book explores scientific processes to characterize materials using modern technologies, and focuses on the interrelationships and interdependence among processing, structure, properties, and performance of materials.

Download or read book Electrochemistry of Metal Chalcogenides written by Mirtat Bouroushian and published by Springer Science & Business Media. This book was released on 2010-04-23 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author provides a unified account of the electrochemical material science of metal chalcogenide (MCh) compounds and alloys with regard to their synthesis, processing and applications. Starting with the chemical fundamentals of the chalcogens and their major compounds, the initial part of the book includes a systematic description of the MCh solids on the basis of the Periodic Table in terms of their structures and key properties. This is followed by a general discussion on the electrochemistry of chalcogen species, and the principles underlying the electrochemical formation of inorganic compounds/alloys. The core of the book offers an insight into available experimental results and inferences regarding the electrochemical preparation and microstructural control of conventional and novel MCh structures. It also aims to survey their photoelectrochemistry, both from a material-oriented point of view and as connected to specific processes such as photocatalysis and solar energy conversion. Finally, the book illustrates the relevance of MCh materials to various applications of electrochemical interest such as (electro)catalysis in fuel cells, energy storage with intercalation electrodes, and ion sensing.

Download or read book Design of Advanced Photocatalytic Materials for Energy and Environmental Applications written by Juan M. Coronado and published by Springer Science & Business Media. This book was released on 2013-05-27 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research for the development of more efficient photocatalysts has experienced an almost exponential growth since its popularization in early 1970’s. Despite the advantages of the widely used TiO2, the yield of the conversion of sun power into chemical energy that can be achieved with this material is limited prompting the research and development of a number of structural, morphological and chemical modifications of TiO2 , as well as a number of novel photocatalysts with very different composition. Design of Advanced Photocatalytic Materials for Energy and Environmental Applications provides a systematic account of the current understanding of the relationships between the physicochemical properties of the catalysts and photoactivity. The already long list of photocatalysts phases and their modifications is increasing day by day. By approaching this field from a material sciences angle, an integrated view allows readers to consider the diversity of photocatalysts globally and in connection with other technologies. Design of Advanced Photocatalytic Materials for Energy and Environmental Applications provides a valuable road-map, outlining the common principles lying behind the diversity of materials, but also delimiting the imprecise border between the contrasted results and the most speculative studies. This broad approach makes it ideal for specialist but also for engineers, researchers and students in related fields.

Download or read book Minerals as Advanced Materials II written by S V Krivovichev and published by Springer Science & Business Media. This book was released on 2011-12-01 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of papers that are devoted to various aspects of interactions between mineralogy and material sciences. It will include reviews, perspective papers and original research papers on mineral nanostructures, biomineralization, micro- and nanoporous mineral phases as functional materials, physical and optical properties of minerals, etc. Many important materials that dominate modern technological development were known to mineralogists for hundreds of years, though their properties were not fully recognized. Mineralogy, on the other hand, needs new impacts for the further development in the line of modern scientific achievements such as bio- and nanotechnologies as well as by the understanding of a deep role that information plays in the formation of natural structures and definition of natural processes. It is the idea of this series of books to provide an arena for interdisciplinary discussion on minerals as advanced materials.

Download or read book Advanced Functional Materials from Nanopolysaccharides written by Ning Lin and published by Springer Nature. This book was released on 2019-11-15 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the latest research on nanopolysaccharides in the development of functional materials, from their preparation, properties and functional modifications to the architecture of diverse functional materials. Polysaccharide-based nanoparticles, including nanocellulose, nanochitin, and nanostarch have attracted interest in the field of nanoscience, nanotechnology, and materials science that encompasses various industrial sectors, such as biomedicine, catalyst, coating, energy, optical materials, environmental materials, construction materials, and antibacterial materials. This book establishes a fundamental framework, highlighting the architecture strategies of typical functional systems based on nanopolysaccharides and integrated analysis of their significant influence and properties to various functional behaviors of materials, to help readers to fully understand the fundamental features of nanopolysaccharides and functional materials. Addressing the potential for practical applications, the book also covers the related industrial interests and reports on highly valued products from nanopolysaccharides, providing ideas for future studies in the area. Intended both for academics and professionals who are interested in nanopolysaccharides, it is also a valuable resource for postgraduate students, researchers, and engineers involved in R&D of natural polymers, nanotechnology, and functional materials.

Download or read book Nanotechnology Enabled Sensors written by Kourosh Kalantar-zadeh and published by Springer Science & Business Media. This book was released on 2007-09-19 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology provides tools for creating functional materials, devices, and systems by controlling materials at the atomic and molecular scales and making use of novel properties and phenomena. Nanotechnology-enabled sensors find applications in several fields such as health and safety, medicine, process control and diagnostics. This book provides the reader with information on how nanotechnology enabled sensors are currently being used and how they will be used in the future in such diverse fields as communications, building and facilities, medicine, safety, and security, including both homeland defense and military operations.

Download or read book Eco friendly Polymer Nanocomposites written by Vijay Kumar Thakur and published by Springer. This book was released on 2015-07-20 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains precisely referenced chapters, emphasizing environment-friendly polymer nanocomposites with basic fundamentals, practicality and alternatives to traditional nanocomposites through detailed reviews of different environmental friendly materials procured from different resources, their synthesis and applications using alternative green approaches. The book aims at explaining basics of eco-friendly polymer nanocomposites from different natural resources and their chemistry along with practical applications which present a future direction in the biomedical, pharmaceutical and automotive industry. The book attempts to present emerging economic and environmentally friendly polymer nanocomposites that are free from side effects studied in the traditional nanocomposites. This book is the outcome of contributions by many experts in the field from different disciplines, with various backgrounds and expertises. This book will appeal to researchers as well as students from different disciplines. The content includes industrial applications and will fill the gap between the research works in laboratory to practical applications in related industries.

Download or read book Nanotechnology for Water Treatment and Purification written by Anming Hu and published by Springer. This book was released on 2014-07-04 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the latest progress in the application of nanotechnology for water treatment and purification. Leaders in the field present both the fundamental science and a comprehensive overview of the diverse range of tools and technologies that have been developed in this critical area. Expert chapters present the unique physicochemical and surface properties of nanoparticles and the advantages that these provide for engineering applications that ensure a supply of safe drinking water for our growing population. Application areas include generating fresh water from seawater, preventing contamination of the environment and creating effective and efficient methods for remediation of polluted waters. The chapter authors are leading world-wide experts in the field with either academic or industrial experience, ensuring that this comprehensive volume presents the state-of-the-art in the integration of nanotechnology with water treatment and purification.

Download or read book Fast Ion Transport in Solids written by B. Scrosati and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main motivation for the organization of the Advanced Research Workshop in Belgirate was the promotion of discussions on the most recent issues and the future perspectives in the field of Solid State lonics. The location was chosen on purpose since Belgirate was the place were twenty years ago, also then under the sponsorship of NATO, the very first international meeting on this important and interdisciplinary field took place. That meeting was named "Fast Ion Transport in Solids" and gathered virtually everybody at that time having been active in any aspect of motion of ions in solids. The original Belgirate Meeting made for the first time visible the technological potential related to the phenomenon of the fast ionic transport in solids and, accordingly, the field was given the name "Solid State lonics". This field is now expanded to cover a wide range of technologies which includes chemical sensors for environmental and process control, electrochromic windows, mirrors and displays, fuel cells, high performance rechargeable batteries for stationary applications and electrotraction, chemotronics, semiconductor ionics, water electrolysis cells for hydrogen economy and other applications. The main idea for holding an anniversary meeting was that of discussing the most recent issues and the future perspectives of Solid State lonics just twenty years after it has started at the same location on the lake Maggiore in North Italy.

Download or read book Analytical Geomicrobiology written by Janice P. L. Kenney and published by Cambridge University Press. This book was released on 2019-07-18 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive handbook outlining state-of-the-art analytical techniques used in geomicrobiology, for advanced students, researchers and professional scientists.

Download or read book Bionanocomposites written by Carole Aimé and published by John Wiley & Sons. This book was released on 2017-09-05 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginning with a general overview of nanocomposites, Bionanocomposites: Integrating Biological Processes for Bio-inspired Nanotechnologies details the systems available in nature (nucleic acids, proteins, carbohydrates, lipids) that can be integrated within suitable inorganic matrices for specific applications. Describing the relationship between architecture, hierarchy and function, this book aims at pointing out how bio-systems can be key components of nanocomposites. The text then reviews the design principles, structures, functions and applications of bionanocomposites. It also includes a section presenting related technical methods to help readers identify and understand the most widely used analytical tools such as mass spectrometry, calorimetry, and impedance spectroscopy, among others.

Download or read book Fiberglass and Glass Technology written by Frederick T. Wallenberger and published by Springer Science & Business Media. This book was released on 2009-11-27 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiberglass and Glass Technology: Energy-Friendly Compositions and Applications provides a detailed overview of fiber, float and container glass technology with special emphasis on energy- and environmentally-friendly compositions, applications and manufacturing practices which have recently become available and continue to emerge. Energy-friendly compositions are variants of incumbent fiberglass and glass compositions that are obtained by the reformulation of incumbent compositions to reduce the viscosity and thereby the energy demand. Environmentally-friendly compositions are variants of incumbent fiber, float and container glass compositions that are obtained by the reformulation of incumbent compositions to reduce environmentally harmful emissions from their melts. Energy- and environmentally-friendly compositions are expected to become a key factor in the future for the fiberglass and glass industries. This book consists of two complementary sections: continuous glass fiber technology and soda-lime-silica glass technology. Important topics covered include: o Commercial and experimental compositions and products o Design of energy- and environmentally-friendly compositions o Emerging glass melting technologies including plasma melting o Fiberglass composite design and engineering o Emerging fiberglass applications and markets Fiberglass and Glass Technology: Energy-Friendly Compositions and Applications is written for researchers and engineers seeking a modern understanding of glass technology and the development of future products that are more energy- and environmentally-friendly than current products.

Download or read book Electrochemistry for the Environment written by Christos Comninellis and published by Springer Science & Business Media. This book was released on 2009-10-15 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wastewater treatment technology is undergoing a profound transformation due to the fundamental changes in regulations governing the discharge and disposal of h- ardous pollutants. Established design procedures and criteria, which have served the industry well for decades, can no longer meet the ever-increasing demand. Toxicity reduction requirements dictate in the development of new technologies for the treatment of these toxic pollutants in a safe and cost-effective manner. Fo- most among these technologies are electrochemical processes. While electrochemical technologies have been known and utilized for the tre- ment of wastewater containing heavy metal cations, the application of these p- cesses is only just a beginning to be developed for the oxidation of recalcitrant organic pollutants. In fact, only recently the electrochemical oxidation process has been rec- nized as an advanced oxidation process (AOP). This is due to the development of boron-doped diamond (BDD) anodes on which the oxidation of organic pollutants is mediated via the formation of active hydroxyl radicals.

Download or read book A New Generation Material Graphene Applications in Water Technology written by Mu. Naushad and published by Springer. This book was released on 2018-06-20 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a unique collection of up-to-date applications of graphene for water science. Because water is an invaluable resource and the intelligent use and maintenance of water supplies is one of the most important and crucial challenges that stand before mankind, new technologies are constantly being sought to lower the cost and footprint of processes that make use of water resources as potable water as well as water for agriculture and industry, which are always in desperate demand. Much research is focused on graphene for different water treatment uses. Graphene, whose discovery won the 2010 Nobel Prize in physics, has been a shining star in the material science in the past few years. Owing to its interesting electrical, optical, mechanical and chemical properties, graphene has found potential applications in a wide range of areas, including water purification technology. A new type of graphene-based filter could be the key to managing the global water crisis. According to the World Economic Forum's Global Risks Report, lack of access to safe, clean water is the biggest risk to society over the coming decade. Yet some of these risks could be mitigated by the development of this filter, which is so strong and stable that it can be used for extended periods in the harshest corrosive environments, and with less maintenance than other filters on the market. The graphene-based filter could be used to filter chemicals, viruses, or bacteria from a range of liquids. It could be used to purify water, dairy products or wine, or in the production of pharmaceuticals. This book provides practical information to all those who are involved in this field.

Download or read book Green Adsorbents for Pollutant Removal written by Grégorio Crini and published by Springer. This book was released on 2018-07-31 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume on adsorption using green adsorbents and is written by international contributors who are the leading experts in the adsorption field. Together with the first volume they show a typical selection of green materials used in wastewater treatment, with emphasis on industrial effluents. This second volume focuses on innovative materials. It presents hemp-based materials for metal removal, and the use of leaves for metal removal. It describes the biosorption of metals and metalloids on various materials and discusses the recent advances in cellulose-based adsorbents used in environmental purposes. Furthermore, activated carbons from food wastes, aerogels and bones, and municipal solid waste biochar as efficient materials for pollutant removal, respectively are reviewed as well as biosorption of dyes onto microbial biosorbents and the use of mushroom biomass to remove pollutants are looked at. The volume also includes detailed review of green adsorbents for removal of antibiotics, pesticides and endocrine disruptors and the use of pillared interlayered clays as innovative materials for pollutant removal. Finally, the use of green adsorbents for radioactive pollutant removal from natural water is discussed. The audience for this book includes students, environmentalists, engineers, water scientists, civil and industrial personnel who wish to specialize in adsorption technology. Academically, this book will be of use to students in chemical and environmental engineering who wish to learn about adsorption and its fundamentals. It has also been compiled for practicing engineers who wish to know about recent developments on adsorbent materials in order to promote further research toward improving and developing newer adsorbents and processes for the efficient removal of pollutants from industrial effluents. It is hoped that the book will serve as a readable and useful presentation not only for undergraduate and postgraduate students but also for the water scientists and engineers and as a convenient reference handbook in the form of numerous recent examples and appended information.