Download or read book Chemistry for Technologists written by G. R. Palin and published by Elsevier. This book was released on 2014-05-17 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry for Technologists provides a basic text on chemical principles written specifically for the technologists. The topics covered are those of basic chemistry. Definitions of such terms as chemical reactions, stoichiometry, and atomic structures are made simple so as not to require prior technical background of the subject. The book introduces the student to topics such as structural chemistry, physical chemistry, organic chemistry, and inorganic chemistry. A chapter on analytical chemistry is also provided. The chapter focuses on method of analysis such as routine methods, electrometric methods, and chromatographic methods. Chromatography is a type of separation method, which is discussed in detail. Different types of chromatography are also enumerated. The waves mechanics and hydrogen atom are fully covered. The electronic nature of bonding and bonding between two hydrogen atoms are discussed in detail. The ionic crystals, molecular crystals, and covalent crystals are presented completely. The text will be a useful tool for technology students and practising technologists.
Download or read book Chemistry and Technology of Cyanate Ester Resins written by I. Hamerton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: After epoxy resins and polyimides, cyanate esters arguably form the most well-developed group of high-temperature, thermosetting polymers. They possess a number of desirable performance characteristics which make them of increasing technological importance, where their somewhat higher costs are acceptable. The principal end uses for cyanate esters are as matrix resins for printed wiring board laminates and structural composites. For the electronics markets, the low dielectric loss characteristics, dimen sional stability at molten solder temperatures and excellent adhesion to conductor metals at temperatures up to 250°C, are desirable. In their use in aerospace composites, unmodified cyanate esters offer twice the frac ture toughness of multifunctional epoxies, while achieving a service tem perature intermediate between epoxy and bis-maleimide capabilities. Applications in radome construction and aircraft with reduced radar signatures utilize the unusually low capacitance properties of cyanate esters and associated low dissipation factors. While a number of commercial cyanate ester monomers and prepoly mers are now available, to date there has been no comprehensive review of the chemistry and recent technological applications of this versatile family of resins. The aims of the present text are to present these in a com pact, readable form. The work is primarily aimed at materials scientists and polymer technologists involved in research and development in the chemical, electronics, aerospace and adhesives industries. It is hoped that advanced undergraduates and postgraduates in polymer chemistry and technology, and materials science/technology will find it a useful introduc tion and source of reference in the course of their studies.
Download or read book Advances in Potato Chemistry and Technology written by Jaspreet Singh and published by Academic Press. This book was released on 2009-07-22 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in potato chemistry, including identification and use of the functional components of potatoes, genetic improvements and modifications that increase their suitability for food and non-food applications, the use of starch chemistry in non-food industry and methods of sensory and objective measurement have led to new and important uses for this crop. Advances in Potato Chemistry and Technology presents the most current information available in one convenient resource.The expert coverage includes details on findings related to potato composition, new methods of quality determination of potato tubers, genetic and agronomic improvements, use of specific potato cultivars and their starches, flours for specific food and non-food applications, and quality measurement methods for potato products. - Covers potato chemistry in detail, providing key understanding of the role of chemical compositions on emerging uses for specific food and non-food applications - Presents coverage of developing areas, related to potato production and processing including genetic modification of potatoes, laboratory and industry scale sophistication, and modern quality measurement techniques to help producers identify appropriate varieties based on anticipated use - Explores novel application uses of potatoes and potato by-products to help producers identify potential areas for development of potato variety and structure
Download or read book The Chemistry and Technology of Pectin written by Reginald H. Walter and published by Academic Press. This book was released on 2012-12-02 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fundamental understanding of polymers has evolved in recent years concurrent with advances in analytical instrumentation. The theories and methodologies developed for the galacturonan biopolymers (collectively called pectins) have seldom been discoursed comprehensively in the context of the new knowledge. This text explains the scientific and technical basis of many of the practices followed in processing and preparing foods fabricated with or containing pectin. The material is presented in a very readable fashion for those with limited technical training. - Structural analysis - Commercial extractions methods - Pectin formulations and tropical fruit analysis - Molecular mechanisms of gelatin - Enzymology - Polymer comformation techniques - Analytical methods of polymer analysis
Download or read book Chemistry and Technology of Emulsion Polymerisation written by A. M. van Herk and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emulsion polymerisation produces high value polymers in a low cost, environmentally friendly process. The drive to develop environmentally benign production methods for polymers has resulted in widespread development and implementation of the emulsion polymerisation technique. In addition, when combined with novel polymerisation mechanisms the process can give rise to a range of polymer products with particularly useful properties. Emulsion polymerisation is a complex process, governed by the interplay of both chemical and physical properties including polymerisation kinetics and dispersion stability. Successful industrial application relies on understanding and controlling those properties. By carefully explaining the principles of the reaction, based on well-designed experimental investigation, Chemistry and Technology of Emulsion Polymerisation provides a practical and intuitive explanation of emulsion polymerisation. In the development of industrial processes, coupling that understanding with everyday practice can be a further difficult step, so the book emphasises a clear, comprehensive and straightforward discussion to illustrate how the principles relate to practical application. Written for research chemists, technologists and engineers in the polymer, fine and specialty chemicals industries, and in university or government laboratories, this book will be particularly valuable to those early on in their careers. The comprehensive and straightforward coverage will also ensure it is an important resource for advanced courses in emulsion polymerisation.
Download or read book Chemistry and Technology of Flavours and Fragrances written by David Rowe and published by John Wiley & Sons. This book was released on 2009-02-12 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern flavours and fragrances are complex formulated products,containing blends of aroma compounds with auxiliary materials,enabling desirable flavours or fragrances to be added to a hugerange of products. From the identification and synthesis ofmaterials such as cinnamaldehyde and vanillin in the 19th Centuryto the current application of advanced analytical techniques foridentification of trace aroma compounds present in naturalmaterials, the flavour and fragrance industry has developed as akey part of the worldwide specialty chemicals industry. With contributions mainly coming from industry based experts,Chemistry & Technology of Flavours and Fragrancesprovides a detailed overview of the synthesis, chemistry andapplication technology of the major classes aroma compounds. Withseparate chapters covering important technical aspects such as thestability of aroma compounds, structure – odour relationshipsand identification of aroma compounds, this book will be essentialreading for both experienced and graduate level entrants to theflavour & fragrance industry. It will also serve as animportant introduction to the subject for chemists andtechnologists in those industries that use flavours and fragrances,eg food, cosmetics & toiletries, and household products. David Rowe is Technical Manager at De Monchy Aromatics Ltd.,Poole UK
Download or read book Starch Chemistry and Technology written by Roy L. Whistler and published by Academic Press. This book was released on 2012-12-02 with total page 743 pages. Available in PDF, EPUB and Kindle. Book excerpt: Starch: Chemistry and Technology, Second Edition focuses on the chemistry, processes, methodologies, applications, and technologies involved in the processing of starch. The selection first elaborates on the history and future expectation of starch use, economics and future of the starch industry, and the genetics and physiology of starch development. Discussions focus on polysaccharide biosynthesis, nonmutant starch granule polysaccharide composition, cellular developmental gradients, projected future volumes of corn likely to be used by the wet-milling industry, and organization of the corn wet-milling industry. The manuscript also tackles enzymes in the hydrolysis and synthesis of starch, starch oligosaccharides, and molecular structure of starch. The publication examines the organization of starch granules, fractionation of starch, and gelatinization of starch and mechanical properties of starch pastes. Topics include methods for determining starch gelatinization, solution properties of amylopectin, conformation of amylose in dilute solution, and biological and biochemical facets of starch granule structure. The text also takes a look at photomicrographs of starches, industrial microscopy of starches, and starch and dextrins in prepared adhesives. The selection is a vital reference for researchers interested in the processing of starch.
Download or read book Chemistry and Technology of Agrochemical Formulations written by A. Knowles and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agrochemical products and adjuvants are of vital importance in agriculture, to protect food and fibre crops from weeds, insect pests and diseases, in order to feed and clothe the growing world population. In recent years there have been increasing pressures to produce agrochemical formulations which have a lower environmental impact and are safer in use. Enormous changes have taken place in the chemistry and technology of agrochemicals over the last twenty years or so and this book provides a timely review of the most important area of technology in the development of new products. This book covers issues around international product quality and safety standards and describes the current and likely future trends which will carry the industry forward into the next millennium. It brings together well known international experts with many years of practical experience from agrochemical companies, consultancies, academic institutions and regulatory bodies. Chemists and technologists involved in developing new or improved agrochemical formulations will find this book an essential reference in the course of their work. The book will also be of interest to those working in research and development departments of raw material suppliers, as a concise review of this important field.
Download or read book Applied Chemistry written by Oleg Roussak and published by Springer Science & Business Media. This book was released on 2013 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated edition of Gesser’s classic textbook has undergone a full revision and now has the latest material, including new chapters on semiconductors and nanotechnology. It includes a supplementary laboratory section with stepwise experimental protocols.
Download or read book Chemistry for Sustainable Technologies written by Neil Winterton and published by Royal Society of Chemistry. This book was released on 2021-02-04 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the success of the first edition, this fully updated and revised book continues to provide an interdisciplinary introduction to sustainability issues in the context of chemistry and chemical technology. Its prime objective is to equip young chemists (and others) to more fully to appreciate, defend and promote the role that chemistry and its practitioners play in moving towards a society better able to control, manage and ameliorate its impact on the ecosphere. To do this, it is necessary to set the ideas, concepts, achievements and challenges of chemistry and its application in the context of its environmental impact, past, present and future, and of the changes needed to bring about a more sustainable yet equitable world. Progress since 2010 is reflected by the inclusion of the latest research and thinking, selected and discussed to put the advances concisely in a much wider setting – historic, scientific, technological, intellectual and societal. The treatment also examines the complexities and additional challenges arising from public and media attitudes to science and technology and associated controversies and from the difficulties in reconciling environmental protection and global development. While the book stresses the central importance of rigour in the collection and treatment of evidence and reason in decision-making, to ensure that it meets the needs of an extensive community of students, it is broad in scope, rather than deep. It is, therefore, appropriate for a wide audience, including all practising scientists and technologists.
Download or read book Chemistry and Technology of Soft Drinks and Fruit Juices written by Philip R. Ashurst and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soft drinks and fruit juices are produced in almost every country in the world and their availability is remarkable. From the largest cities to some of the remotest villages, soft drinks are available in a variety of flavours and packaging. The market for these products continues to show a remarkable potential for growth. The variety of products and packaging types continues to expand, and among the more significant developments in recent years has been the increase in diet drinks of very high quality, many of which are based on spring or natural mineral water. This book provides an overview of the chemistry and technology of soft drinks and fruit juices. The original edition has been completely revised and extended, with new chapters on Trends in Beverage Markets, Fruit and Juice Processing, Carbohydrate and Intense Sweeteners, Non-Carbonated Beverages, Carbonated Beverages, and Functional Drinks containing Herbal Extracts. It is directed at graduates in food science, chemistry or microbiology entering production, quality control, new product development or marketing in the beverage industry or in companies supplying ingredients or packaging materials to the beverage industry.
Download or read book Chemistry and Technology of Lubricants written by R. M. Mortier and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use oflubricants began in ancient times and has developed into a major international business through the need to lubricate machines of increasing complexity. The impetus for lubricant development has arisen from need, so lubricatingpractice has precededan understandingofthescientificprinciples. This is not surprising as the scientific basis of the technology is, by nature, highly complex and interdisciplinary. However, we believe that the under standing of lubricant phenomena will continue to be developed at a mol ecular level to meet future challenges. These challenges will include the control of emissions from internal combustion engines, the reduction of friction and wear in machinery, and continuing improvements to lubricant performanceand life-time. More recently, there has been an increased understanding ofthe chemical aspects of lubrication, which has complemented the knowledge and under standing gained through studies dealing with physics and engineering. This book aims to bring together this chemical information and present it in a practical way. It is written by chemists who are authorities in the various specialisations within the lubricating industry, and is intended to be of interest to chemists who may already be working in the lubricating industry or in academia, and who are seeking a chemist's view of lubrication. It will also be of benefit to engineers and technologists familiar with the industry who requirea more fundamental understanding oflubricants.
Download or read book Chemistry and Technology of Biodegradable Polymers written by G. Griffin and published by Springer. This book was released on 1993-12-31 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the early 1970s the subject of biodegradable plastics has acquired a rapidly growing literature of academic research papers. It has also acquired a formidable volume of patent documentation and all this has been over whelmed by an astonishing quantity of serious media and political com ment. A new entrant into any technical arena w. ould, in most technologies, simply visit their technical library and pick up a text book on the subject in the expectation of absorbing the basic facts before launching into the daily task of updating and evaluating. Scientific conferences have produced many substantial volumes carrying the word 'biodegradable' on their covers, and there has even been a specialist monograph on the topic of bacterially produced polymers but, surprisingly, no book has yet emerged providing a general survey of the subject. Having devoted half my pro fessional career to the subject of biodegradable plastics I agreed to take on the editorial job of producing such a book when asked by the publisher. I knew that the task of finding expert specialists and persuading them to contribute dispassionate accounts of their specialisms would not be easy, but the difficulties that I have encountered were far greater than I expected. Some were simply too busy, others were involved in patent disputes or commercial negotiations. In giving an account of the work that I and my students carried out at BruneI University I believe that I have written in a manner that displays enthusiasm without prejudice.
Download or read book Chemistry and Technology of Isocyanates written by Henri Ulrich and published by John Wiley & Sons. This book was released on 1996 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry and Technology of Isocyanates is a comprehensive book on isocyanate chemistry and technology. It highlights the industrial applications of diisocyanates in the manufacture of flexible and rigid foams, elastomers, coatings and adhesives; discusses ionomers used in water-based coatings, polymer networks and biomedical polymers; and reviews current and future environmental issues, including toxicity and safe handling of isocyanates, recycling of isocyanate derived polymers and monomers derived from natural products.
Download or read book Flavours and Fragrances written by Ralf Günter Berger and published by Springer Science & Business Media. This book was released on 2007-03-06 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to the world of aroma chemicals, essential oils, fragrances and flavour compositions for the food, cosmetics and pharmaceutical industry. Present technology, the future use of resources and biotechnological approaches for the production of the respective chemical compounds are described. The book has an integrated and interdisciplinary approach on future industrial production and the issues related to this topic.
Download or read book Chemistry and Technology of Thermosetting Polymers in Construction Applications written by M.H. Irfan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric products are used widely in the construction industry, because they offer a range of desirable performance properties not available from traditional materials. Development of these products continues in a number of major research and development programmes within the construction materials sector, aimed at improving the performance, durability and applicational properties of these materials. It seems certain that their use will increase as their overall performance is developed and as the industry becomes more familiar with the techniques required to apply these materials and the benefits they offer. The purpose of this book is to familiarise the reader with the range of thermosetting polymeric materials available for construction applications, and to provide sound information on the properties and applications of these important materials. Professional engineers involved in the specification, application and testing of these materials will find this book a compact, authoritative and comprehensive source of information on these materials. Chemists and technologists involved in developing new or improved formulations will find in this book much to inform their work, particularly in the important area of applicational properties.
Download or read book Handbook of Fiber Chemistry written by Menachem Lewin and published by CRC Press. This book was released on 2006-11-15 with total page 1058 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Fiber Chemistry, Third Edition provides complete coverage of scientific and technological principles for all major natural and synthetic fibers. Incorporating new scientific techniques, instruments, characterization, and processing methods, the book features important technological advances from the past decade, particularly
