Download or read book Chemistry and Technology of Cyanate Ester Resins written by I. Hamerton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: After epoxy resins and polyimides, cyanate esters arguably form the most well-developed group of high-temperature, thermosetting polymers. They possess a number of desirable performance characteristics which make them of increasing technological importance, where their somewhat higher costs are acceptable. The principal end uses for cyanate esters are as matrix resins for printed wiring board laminates and structural composites. For the electronics markets, the low dielectric loss characteristics, dimen sional stability at molten solder temperatures and excellent adhesion to conductor metals at temperatures up to 250°C, are desirable. In their use in aerospace composites, unmodified cyanate esters offer twice the frac ture toughness of multifunctional epoxies, while achieving a service tem perature intermediate between epoxy and bis-maleimide capabilities. Applications in radome construction and aircraft with reduced radar signatures utilize the unusually low capacitance properties of cyanate esters and associated low dissipation factors. While a number of commercial cyanate ester monomers and prepoly mers are now available, to date there has been no comprehensive review of the chemistry and recent technological applications of this versatile family of resins. The aims of the present text are to present these in a com pact, readable form. The work is primarily aimed at materials scientists and polymer technologists involved in research and development in the chemical, electronics, aerospace and adhesives industries. It is hoped that advanced undergraduates and postgraduates in polymer chemistry and technology, and materials science/technology will find it a useful introduc tion and source of reference in the course of their studies.
Download or read book Concise Polymeric Materials Encyclopedia written by Joseph C. Salamone and published by CRC Press. This book was released on 1998-08-28 with total page 1778 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concise Polymeric Materials Encyclopedia culls the most used, widely applicable articles from the Polymeric Materials Encyclopedia - more than 1,100 - and presents them to you in a condensed, well-ordered format. Featuring contributions from more than 1,800 scientists from all over the world, the book discusses a vast array of subjects related to the: synthesis, properties, and applications of polymeric materials development of modern catalysts in preparing new or modified polymers modification of existing polymers by chemical and physical processes biologically oriented polymers This comprehensive, easy-to-use resource on modern polymeric materials serves as an invaluable addition to reference collections in the polymer field.
Download or read book Reactive Polymers Fundamentals and Applications written by Johannes Karl Fink and published by William Andrew. This book was released on 2005-07-15 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: Loaded with practical knowledge, Reactive Polymers Fundamentals and Applications: A Concise Guide to Industrial Polymers comprehensively presents the state-of-art of methods and materials for the formulation of polymeric resins. It is an indispensable tool for chemists, engineers, and manufacturers who use, formulate, and cure raw materials into final products. The text focuses on the chemical modification of properties during the final stage of part fabrication from plastics. Newer applications range from the small scale, such as dental fillings, to industrial processes for batch fabrication. The book covers resin groups in major use in industry and under active research and development.
Download or read book New Polymerization Techniques and Synthetic Methodologies written by and published by Springer. This book was released on 2003-07-01 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: -
Download or read book Phenolic Resins A Century of Progress written by Louis Pilato and published by Springer Science & Business Media. This book was released on 2010-03-10 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: The legacy of Leo Hendrik Baekeland and his development of phenol formal- hyde resins are recognized as the cornerstone of the Plastics Industry in the early twentieth century, and phenolic resins continue to ?ourish after a century of robust growth. On July 13, 1907, Baekeland ?led his “heat and pressure” patent related to the processing of phenol formaldehyde resins and identi?ed their unique utility in a plethora of applications. The year 2010 marks the Centennial Year of the prod- tion of phenolic resins by Leo Baekeland. In 1910, Baekeland formed Bakelite GmbH and launched the manufacture of phenolic resins in Erkner in May 1910. In October 1910, General Bakelite began producing resins in Perth Amboy, New Jersey. Lastly, Baekeland collaborated with Dr. Takamine to manufacture phenolic resins in Japan in 1911. These events were instrumental in establishing the Plastics Industry and in tracing the identity to the brilliance of Dr. Leo Baekeland. Phenolic resins remain as a versatile resin system featuring either a stable, thermoplastic novolak composition that cures with a latent source of formaldehyde (hexa) or a heat reactive and perishable resole composition that cures thermally or under acidic or special basic conditions. Phenolic resins are a very large volume resin system with a worldwide volume in excess of 5 million tons/year, and its growth is related to the gross national product (GNP) growth rate globally.
Download or read book Microbial Processing of Metal Sulfides written by Edgardo R. Donati and published by Springer Science & Business Media. This book was released on 2007-05-11 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of microbiological methods to the extraction of metals from minerals is supported by several bioleaching and biooxidation processes operating in different sites over the world. This book details the basic aspects of the process with special emphasis on recent contributions regarding the chemical and microbial aspects of the bioleaching process and the use of microorganisms in the treatment of complex ores and concentrates.
Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies
Download or read book Handbook of Thermoset Plastics written by Andreas Kandelbauer and published by Elsevier Inc. Chapters. This book was released on 2013-11-28 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their special structural features (triazine ring, oxygen linkages, low dielectric loss) cyanate ester resins represent a promising class of high-performance polymers. They are suitable as matrix materials for applications where, among other properties, stability at high service temperatures, low dielectric loss, and good mechanical performance is required. This chapter deals with some general aspects regarding the chemistry and technology of cyanate ester resins and highlights their most important applications. Relevant performance characteristics of cyanate esters and selected blends with bismaleimide and epoxy resins are briefly discussed. Some recent developments regarding novel monomers are presented as well.
Download or read book Adhesives Technology for Electronic Applications written by James J. Licari and published by William Andrew. This book was released on 2011-06-24 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.512 pagesApprox.512 pages
Download or read book Chemical Dynamics in Extreme Environments written by Rainer A. Dressler and published by World Scientific. This book was released on 2001 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: As computing power increases, a growing number of macroscopic phenomena are modeled at the molecular level. Consequently, new requirements are generated for the understanding of molecular dynamics in exotic conditions. This book illustrates the importance of detailed chemical dynamics and the role it plays in the phenomenology of a number of extreme environments. Each chapter addresses one or more extreme environments, outlines the associated chemical mechanisms of relevance, and then covers the leading edge science that elucidates the chemical coupling. The chapters exhibit a balance between theory and experiment, gas phase, solid state, and surface dynamics, and geophysical and technical environments. Sample Chapter(s). Chapter 1.1: Introduction (203 KB). Chapter 1.2: Chemistry at High Temperatures and Pressures (99 KB). Chapter 1.3: High Temperature Chemistry in the Atmosphere (82 KB). Chapter 1.4: Low Temperature Chemistry (90 KB). Chapter 1.5: Conclusions (131 KB). Contents: Exploring Chemistry in Extreme Environments: A Driving Force for Innovation (M R Berman); Chemistry Under Extreme Conditions: Cluster Impact Activation (T Raz & R D Levine); Nonequilibrium Chemistry Modeling in Rarefied Hypersonic Flows (I D Boyd); Chemical Dynamics in Chemical Laser Media (M C Heaven); From Elementary Reactions to Complex Combustion Systems (C Schulz et al.); The Gas-Phase Chemical Dynamics Associated with Meteors (R A Dressler & E Murad); Dynamics of Hypervelocity Gas/Surface Collisions (D C Jacobs); Surface Chemistry in the Jovian Magnetosphere Radiation Environment (R E Johnson); Dynamics of Atomic Oxygen Induced Polymer Degradation in Low Earth Orbit (T K Minton & D J Garton); Atomic-Level Properties of Thermal Barrier Coatings: Characterization of MetalOCoCeramic Interface (A Christensen et al.); Molecular Dynamics Simulations of Detonations (C T White et al.). Readership: Scientists engaged in cross-disciplinary work and chemists studying multidisciplinary problems."
Download or read book Phenolic Resins written by A. Gardziella and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This vastly expanded 2nd edition contains all the new developments since 1985. It describes significant new phenolic resin chemistry, new applications with up-to-date developments, and includes detailed standardized test methods important for ISO 9001 ff certification.
Download or read book Optical Sensors and Switches written by V. Ramamurthy and published by CRC Press. This book was released on 2001-07-24 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: A consideration of the development of photochemical systems with functions as optical sensors or switches, discussing materials and chemical systems, technology, and applications for target molecules and optical signal multiplexing. It contains novel applications in electrogenerated chemiluminescence and supramolecular photophysics for sensing chemical and biological analytes.
Download or read book Polyhedral Oligomeric Silsesquioxane POSS Polymer Nanocomposites written by Sabu Thomas and published by Elsevier. This book was released on 2021-03-25 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyhedral Oligomeric Silsesquioxane (POSS) Polymer Nanocomposites: From Synthesis to Applications offers extensive coverage of polyhedral oligomeric silsesquioxanes and their nanocomposites, including their synthesis, characterization, interfacial interactions and advanced applications. Sections introduce essentials, information on their preparation and discussions on polymeric materials, including elastomers, thermoplastics, thermosetting polymers, polymer blends and IPNs. Further sections cover the latest analysis techniques, examine the properties of POSS-polymer nanocomposites, and discuss key application areas, such as biological, energy, defense, and space. Finally, issues surrounding industry implementation and lifecycle are explored. This is a valuable reference for researchers, scientists and advanced students in the areas of polymer composites and nanocomposites, polymer chemistry, polymer physics, polymer science, and materials science and engineering. In an industrial setting, this book will be of great interest to scientists, R&D professionals, and engineers across industries and disciplines. - Covers all aspects of polyhedral oligomeric silsesquioxanes (POSS) and their nanocomposites, including synthesis and characterization techniques, properties, analysis, applications and trends - Targets POSS nanocomposites, describing synthesis, characterization and the selection of POSS filler types according to polymeric material - Explains the preparation and utilization of POSS polymer nanocomposites for cutting-edge applications, including biological, energy, and defense field applications
Download or read book Bio Based Epoxy Polymers Blends and Composites written by Jyotishkumar Parameswaranpillai and published by John Wiley & Sons. This book was released on 2021-04-26 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: State-of-the-art overview on bioepoxy polymers as well as their blends and composites -- covering all aspects from fundamentals to applications! Bioepoxy polymers is an emerging area and have attracted more and more attention due to their biodegradability and good thermo-mechanical performance. In recent years, research progress has been made in synthesis, processing, characterization, and applications of bioepoxy blends and composites. Bioepoxy polymers are very promising candidates to replace the traditional thermosetting nonbiodegradable polymers. Bio-Based Epoxy Polymers, Blends and Composites summaries recent research progress on bioepoxy polymers as well as their blends and composites. It covers aspects from synthesis, processing, various characterization techniques to broad spectrum of applications. It provides a correlation of physical properties with macro, micro and nanostructures of the materials. Moreover, research trends, future directions, and opportunities are also discussed. Attracts attention: Bioepoxy polymers are environmentally friendly and considered as a promising candidate to replace the traditional thermosetting nonbiodegradable polymers Highly application-oriented: Bioepoxy polymers can be used in a broad range of applications such as polymer foams, construction, aerospace, automobiles, self-healing systems One-stop reference: Covers all aspects of bioepoxy polymer, their blends and composites, such as synthesis, properties, processing, characterization and applications Broad audience: Attracts attention from both academia and industry
Download or read book Handbook of Thermoset Plastics written by Hanna Dodiuk and published by William Andrew. This book was released on 2021-10-25 with total page 1118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thermoset Plastics, Fourth Edition provides complete coverage of the chemical processes, manufacturing techniques and design properties of each polymer, along with its applications. This new edition has been expanded to include the latest developments in the field, with new chapters on radiation curing, biological adhesives, vitrimers, and 3D printing. This detailed handbook considers the practical implications of using thermoset plastics and the relationships between processing, properties and applications, as well as analyzing the strengths and weakness of different methods and applications.The aim of the book is to help the reader to make the right decision and take the correct action on the basis of informed analysis – avoiding the pitfalls the authors' experience has uncovered. In industry, the book supports engineers, scientists, manufacturers and R&D professionals working with plastics. The information included will also be of interest to researchers and advanced students in plastics engineering, polymer chemistry, adhesives and coatings. - Offers a systematic approach, guiding the reader through chemistry, processing methods, properties and applications of thermosetting polymers - Includes thorough updates that discuss current practice and the new developments on biopolymers, nanotechnology, 3D printing, radiation curing and biological adhesives - Uses case studies to demonstrate how particular properties make different polymers suitable for different applications - Covers end-use and safety considerations
Download or read book Polymer and Ceramic Composite Materials written by Noureddine Ramdani and published by CRC Press. This book was released on 2019-02-07 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes recent advances in the fabrication methods, properties, and applications of various ceramic-filled polymer matrix composites. Surface-modification methods and chemical functionalization of the ceramic fillers are explored in detail, and the outstanding thermal and mechanical properties of polymer–ceramic composites, the modeling of some of their thermal and mechanical parameters, and their major potential applications are discussed along with detailed examples. Aimed at researchers, industry professionals, and advanced students working in materials science and engineering, this work offering a review of a vast number of references in the polymer–ceramic field, this work helps readers easily advance their research and understanding of the field.
Download or read book Handbook of Composites written by S.T. Peters and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 1135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, fiber reinforced composites are in use • properties of different component (fiber, in a variety of structures, ranging from space matrix, filler) materials; craft and aircraft to buildings and bridges. • manufacturing techniques; This wide use of composites has been facili • analysis and design; tated by the introduction of new materials, • testing; improvements in manufacturing processes • mechanically fastened and bonded joints; and developments of new analytical and test • repair; ing methods. Unfortunately, information on • damage tolerance; these topics is scattered in journal articles, in • environmental effects; conference and symposium proceedings, in and disposal; • health, safety, reuse, workshop notes, and in government and com • applications in: pany reports. This proliferation of the source - aircraft and spacecraft; material, coupled with the fact that some of - land transportation; the relevant publications are hard to find or - marine environments; are restricted, makes it difficult to identify and - biotechnology; obtain the up-to-date knowledge needed to - construction and infrastructure; utilize composites to their full advantage. - sporting goods. This book intends to overcome these diffi Each chapter, written by a recognized expert, culties by presenting, in a single volume, is self-contained, and contains many of the many of the recent advances in the field of 'state-of-the-art' techniques reqUired for prac composite materials. The main focus of this tical applications of composites.
