Download or read book Extractive Metallurgy of Copper written by Anil Kumar Biswas and published by Oxford ; Toronto : Pergamon. This book was released on 1980 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Extractive Metallurgy of Copper written by A.K. Biswas and published by Elsevier. This book was released on 2013-10-22 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: A completely revised and up-to-date edition containing comprehensive industrial data. The many significant changes which occurred during the 1980s and 1990s are chronicled. Modern high intensity smelting processes are presented in detail, specifically flash, Contop, Isasmelt, Noranda, Teniente and direct-to-blister smelting. Considerable attention is paid to the control of SO2 emissions and manufacture of H2SO4. Recent developments in electrorefining, particularly stainless steel cathode technology are examined. Leaching, solvent extraction and electrowinning are evaluated together with their impact upon optimizing mineral resource utilization. The volume targets the recycling of copper and copper alloy scrap as an increasingly important source of copper and copper alloys. Copper quality control is also discussed and the book incorporates an important section on extraction economics.Each chapter is followed by a summary of concepts previously described and offers suggested further reading and references.
Download or read book Extractive Metallurgy of Nickel Cobalt and Platinum Group Metals written by Frank Crundwell and published by Elsevier. This book was released on 2011-07-18 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes and explains the methods by which three related ores and recyclables are made into high purity metals and chemicals, for materials processing. It focuses on present day processes and future developments rather than historical processes. Nickel, cobalt and platinum group metals are key elements for materials processing. They occur together in one book because they (i) map together on the periodic table (ii) occur together in many ores and (iii) are natural partners for further materials processing and materials manufacturing. They all are, for example, important catalysts – with platinum group metals being especially important for reducing car and truck emissions. Stainless steels and CoNiFe airplane engine super alloys are examples of practical usage. The product emphasises a sequential, building-block approach to the subject gained through the author's previous writings (particularly Extractive Metallurgy of Copper in four editions) and extensive experience. Due to the multiple metals involved and because each metal originates in several types of ore – e.g. tropical ores and arctic ores this necessitates a multi-contributor work drawing from multiple networks and both engineering and science. - Synthesizes detailed review of the fundamental chemistry and physics of extractive metallurgy with practical lessons from industrial consultancies at the leading international plants - Discusses Nickel, Cobalt and Platinum Group Metals for the first time in one book - Reviews extraction of multiple metals from the same tropical or arctic ore - Industrial, international and multidisciplinary focus on current standards of production supports best practice use of industrial resources
Download or read book Metallurgical Slags written by Nadine M. Piatak and published by Royal Society of Chemistry. This book was released on 2021-08-13 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a definitive reference on the environmental geochemistry and resource potential of metallurgical slags
Download or read book Chemistry written by Bruce Averill and published by . This book was released on 2007 with total page 1233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasises on contemporary applications and an intuitive problem-solving approach that helps students discover the exciting potential of chemical science. This book incorporates fresh applications from the three major areas of modern research: materials, environmental chemistry, and biological science.
Download or read book Chemical Hydrometallurgy written by Alfred Richard Burkin and published by World Scientific. This book was released on 2001 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the undergraduate and MSc courses in hydrometallurgy which Professor A R Burkin gave from 1961 until he retired in 1988. It is divided into two sections. The first deals with the fundamental chemical and physical principles on which the technology is based. In the second, processes which are used for the production of individual metals are described, in terms of those principles where appropriate.
Download or read book Excavations at Mohenjo Daro Pakistan written by George F. Dales and published by UPenn Museum of Archaeology. This book was released on 1986-01-29 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: The pottery of Mohenjo-dara, one of the two major urban centers of the Indus Valley civilization (2500-2000 B.C.) is described and documented. The authors survey Harappan ceramic technology and style, and develop an important and unique approach to vessel form analysis and terminology. Included is Leslie Alcock's account of the pottery from the 1950 excavations by Sir Mortimer Wheeler. University Museum Monograph, 53
Download or read book Copper Catalysis in Organic Synthesis written by Gopinathan Anilkumar and published by John Wiley & Sons. This book was released on 2020-12-07 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most current information on growing field of copper catalysis Copper Catalysis in Organic Synthesis contains an up-to-date overview of the most important reactions in the presence of copper catalysts. The contributors—noted experts on the topic—provide an introduction to the field of copper catalysis, reviewing its development, scope, and limitations, as well as providing descriptions of various homo- and cross-coupling reactions. In addition, information is presented on copper-catalyzed C–H activation, amination, carbonylation, trifluoromethylation, cyanation, and click reactions. Comprehensive in scope, the book also describes microwave-assisted and multi-component transformations as well as copper-catalyzed reactions in green solvents and continuous flow reactors. The authors highlight the application of copper catalysis in asymmetric synthesis and total synthesis of natural products and heterocycles as well as nanocatalysis. This important book: Examines copper and its use in organic synthesis as a more cost-effective and sustainable for researchers in academia and industry Offers the first up-to-date book to explore copper as a first line catalyst for many organic reactions Presents the most significant developments in the area, including cross-coupling reactions, C–H activation, asymmetric synthesis, and total synthesis of natural products and heterocycles Contains over 20 contributions from leaders in the field Written for catalytic chemists, organic chemists, natural products chemists, pharmaceutical chemists, and chemists in industry, Copper Catalysis in Organic Synthesis offers a book on the growing field of copper catalysis, covering cross-coupling reactions, C–H activation, and applications in the total synthesis of natural products.
Download or read book The Chemistry of Gold Extraction written by John Marsden and published by SME. This book was released on 2006 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensively revised and updated, this edition provides the broad base of knowledge required by all working in the gold extraction and gold processing industries. It bridges the gap between research and industry by emphasizing practical applications of chemical principles and techniques.
Download or read book Copper written by Günter Joseph and published by ASM International. This book was released on 1998-12-31 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the technical and commercial considerations regarding the viability of copper for engineering applications. Further, this work presents representative numerical data selected from the scientific literature as well as data collected from industrial sources from around the world.
Download or read book Principles of Extractive Metallurgy written by Terkel Rosenqvist and published by Tapir Academic Press. This book was released on 2004 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rather than simply describing the processes and reactions involved in metal extraction, this book concentrates on fundamental principles to give readers an understanding of the possibilities for future developments in this field. It includes a review of the basics of thermodynamics, kinetics and engineering principles that have special importance for extractive metallurgy, to ensure that readers have the background necessary for maximum achievement. The various metallurgical unit processes (such as roasting, reduction, smelting and electrolysis) are illustrated by existing techniques for the extraction of the most common metals. Each chapter includes a bibliography of recommended reading, to aid in further study. The appendices include tables and graphs of thermodynamic qualities for most substances of metallurgical importance; these are ideal for calculating heat (enthalpy) balances and chemical equilibrium constants. SI Units are used consistently throughout the text.
Download or read book Hydroxyoximes and Copper Hydrometallurgy written by Jan Szymanowski and published by CRC Press. This book was released on 1993-06-11 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydroxyoximes and Copper Hydrometallurgy provides a current examination of what is known regarding hydroxyoxime extractants, the chemistry and physicochemistry of extraction, and the potential of applying hydroxyoximes for extraction of copper and other metals in industrial processes. Topics addressed include the development of the hydrometallurgical process, methods of synthesis and structural characteristics, extraction properties, losses of active substances and problems associated with environmental pollution, the potential of metal extraction and separation with hydroxyoximes, methods of extraction and stripping that can improve metal separation and recovery, the applications of hydroxyoximes in various membrane processes, and industrial processes and equipment used for processing oxide ores and tailing. The book will benefit metallurgists, hydrometallurgists, analytical and physical chemists, and researchers in mining industries and solvent extraction.
Download or read book Physical Chemistry of Metallurgical Processes written by M. Shamsuddin and published by John Wiley & Sons. This book was released on 2016-02-29 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers various metallurgical topics, viz. roasting of sulfide minerals, matte smelting, slag, reduction of oxides and reduction smelting, interfacial phenomena, steelmaking, secondary steelmaking, role of halides in extraction of metals, refining, hydrometallurgy and electrometallurgy. Each chapter is illustrated with appropriate examples of applications of the technique in extraction of some common, reactive, rare or refractory metal together with worked out problems explaining the principle of the operation.
Download or read book Celebrating the Megascale written by Phillip Mackey and published by Springer. This book was released on 2016-12-02 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume contains more than 70 papers covering the important topics and issues in metallurgy today including papers as follows: keynote papers covering a tribute to David Robertson, workforce skills needed in the profession going forward, copper smelting, ladle metallurgy, process metallurgy and resource efficiency, new flash iron making technology, ferro-alloy electric furnace smelting and on the role of bubbles in metallurgical processing operations. Topics covered in detail in this volume include ferro-alloys, non-ferrous metallurgy, iron and steel, modeling, education, and fundamentals.
Download or read book Handbook of Copper Compounds and Applications written by H. Wayne Richardson and published by CRC Press. This book was released on 1997-01-16 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizing the utility of copper-related compounds, this text illustrates the numerous current and potential uses from agricultural bactericides and wood preservatives to colourants and solar cells. It discusses the properties and behaviour of the copper ion, copper compounds' employment in organic polymerization and isomerization reactions, the enhancement of feed efficiencies and additives in plant and animal nutrition, and more.
Download or read book Hydrometallurgy written by Michael Free and published by John Wiley & Sons. This book was released on 2013-10-07 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book provides a college-level overview of chemical processing of metals in water-based solutions, in the field that is known as hydrometallurgy"--
Download or read book Physical Chemistry of Metallurgical Processes Second Edition written by Mohammad Shamsuddin and published by Springer Nature. This book was released on 2021-06-22 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated, second edition retains its classroom-tested treatment of physical chemistry of metallurgical topics, such as roasting of sulfide minerals, matte smelting, converting, structure, properties and theories of slag, reduction of oxides and reduction smelting, interfacial phenomena, steelmaking, secondary steelmaking, role of halides in extraction of metals, refining, hydrometallurgy and electrometallurgy, and adds new data in worked-out examples as well as up-to-date references to the literature. The book further explains the physical chemistry of various metallurgical topics, steps involved in extraction of metals, such as roasting, matte smelting/converting, reduction smelting, steelmaking reactions, deoxidation, stainless steelmaking, vacuum degassing, refining, leaching, chemical precipitation, ion exchange, solvent extraction, cementation, gaseous reduction and electrowinning. Each topic is illustrated with appropriate examples of applications of the technique in extraction of some common, reactive, rare, or refractory metal together with worked out problems explaining the principle of the operation. The problems require imagination and critical analyses and also encourage readers for creative application of thermodynamic data in metal extraction. Updates and condenses text throughout the book by sequential arrangement of paragraphs in different chapters; Maximizes readers’ understanding of the physicochemical principles involved in extraction/production of common and rare/reactive metals by pyro- as well as hydrometallurgical routes; Reinforces concepts presented with worked examples in each chapter explaining the process steps; Explains the physical chemistry of various metallurgical steps, such as roasting, matte smelting/converting, and reduction smelting, steelmaking, aqueous processing etc. in extraction of metals; Collects and uniformly presents scattered information on physicochemical principles of metal production from various books and journals.
