Download or read book Physical Chemical Treatment of Water and Wastewater written by A. P. Sincero and published by IWA Publishing. This book was released on 2002-07-31 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: The books currently available on this subject contain some elements of physical-chemical treatment of water and wastewater but fall short of giving comprehensive and authoritative coverage. They contain some equations that are not substantiated, offering empirical data based on assumptions that are therefore difficult to comprehend. This text brings together the information previously scattered in several books and adds the knowledge from the author's lectures on wastewater engineering. Physical-Chemical Treatment of Water and Wastewater is not only descriptive but is also analytical in nature. The work covers the physical unit operations and unit processes utilized in the treatment of water and wastewater. Its organization is designed to match the major processes and its approach is mathematical. The authors stress the description and derivation of processes and process parameters in mathematical terms, which can then be generalized into diverse empirical situations. Each chapter includes design equations, definitions of symbols, a glossary of terms, and worked examples. One author is an environmental engineer and a professor for over 12 years and the other has been in the practice of environmental engineering for more than 20 years. They offer a sound analytical mathematical foundation and description of processes. Physical-Chemical Treatment of Water and Wastewater fills a niche as the only dedicated textbook in the area of physical and chemical methods, providing an analytical approach applicable to a range of empirical situations Contents Introduction Characteristics of Water and Wastewater Quantity of Water and Wastewater Constituents of Water and Wastewater Unit Operations of Water and Wastewater Treatment Flow Measurements and Flow and Quality Equalizations Pumping Screening, Settling, and Flotation Mixing and Flocculation Conventional Filtration Advanced Filtration and Carbon Adsorption Aeration, Absorption, and Stripping Unit Processes of Water and Wastewater Treatment Water Softening Water Stabilization Coagulation Removal of Iron and Manganese by Chemical Precipitation Removal of Phosphorus by Chemical Precipitation Removal of Nitrogen by Nitrification-Denitrification Ion Exchange Disinfection

Download or read book Industrial Water Treatment Process Technology written by Parimal Pal and published by Butterworth-Heinemann. This book was released on 2017-03-31 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Water Treatment Process Technology begins with a brief overview of the challenges in water resource management, covering issues of plenty and scarcity-spatial variation, as well as water quality standards. In this book, the author includes a clear and rigorous exposition of the various water resource management approaches such as: separation and purification (end of discharge pipe), zero discharge approach (green process development), flow management approach, and preservation and control approach. This coverage is followed by deeper discussion of individual technologies and their applications. Covers water treatment approaches including: separation and purification—end of discharge pipe; zero discharge approach; flow management approach; and preservation and control approach Discusses water treatment process selection, trouble shooting, design, operation, and physico-chemical and treatment Discusses industry-specific water treatment processes

Download or read book Fundamentals of Water Treatment Unit Processes written by David Hendricks and published by CRC Press. This book was released on 2016-04-19 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carefully designed to balance coverage of theoretical and practical principles, Fundamentals of Water Treatment Unit Processes delineates the principles that support practice, using the unit processes approach as the organizing concept. The author covers principles common to any kind of water treatment, for example, drinking water, municipal wastew

Download or read book Chemical Water and Wastewater Treatment VIII written by Hermann H. Hahn and published by IWA Publishing. This book was released on 2004-11-01 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the wake of the Millennium Declaration and the Johannesburg resolutions, many countries have begun to address or re-write their policies regarding water supply and wastewater disposal. The goal is to provide high-quality drinking-water for more people and to safely dispose of spent waters from a large portion of the population than today. This book, as its predecessors, provides information and technical solutions to accomplish this mammoth task. It is the outcome of collective experience and know-how exchanged between experts in the field of water technology from all over the world: from the Americas, from central and southern Africa, from Europe and from different parts of Asia. The Chemical Water and Wastewater Treatment Series provides authoritative coverage of the key current developments in the chemical treatment of water and wastewater in theory or practice and related problems such as sludge production and properties, and the reuse of chemicals and chemically-treated waters and sludges. Chemical Water and Wastewater Treatment VIII is a valuable resource for managers, scientists, plant operators and others interested in chemical water and wastewater treatment technology.

Download or read book Advanced Biological Physical and Chemical Treatment of Waste Activated Sludge written by Antoine Prandota Trzcinski and published by CRC Press. This book was released on 2018-11-02 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, research efforts aiming to improve energy efficiency of wastewater treatment processes for large centralized wastewater treatment plants (WWTPs) have been increasing. Global warming impacts, energy sustainability, and biosolids generation are among several key drivers towards the establishment of energy-efficient WWTPs. WWTPs have been recognized as major contributors of greenhouse gas emissions as these are significant energy consumers in the industrialized world. The quantity of biosolids or excess waste activated sludge produced by WWTP will increase in the future due to population growth and this pose environmental concerns and solid waste disposal issues. Due to limited capacity of landfill sites, more stringent environmental legislation, and air pollution from incineration sites, there is a need to rethink the conventional way of dealing with wastewater and the sludge production that comes with it. This book provides an overview of advanced biological, physical and chemical treatment with the aim of reducing the volume of sewage sludge. Provides a comprehensive list of processes aiming at reducing the volume of sewage sludge and increasing biogas production from waste activated sludge. Includes clear process flowsheet showing how the process is modified compared to the conventional waste activated sludge process. Provides current technologies applied on full scale plant as well as methods still under investigation at laboratory scale. Offers data from pilot scale experience of these processes

Download or read book Wastewater Treatment written by Mogens Henze and published by Springer. This book was released on 2014-03-12 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Agrochemicals Detection Treatment and Remediation written by Majeti Narasimha Vara Prasad and published by Butterworth-Heinemann. This book was released on 2020-03-06 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agrochemicals Detection, Treatment and Remediation focuses on the latest research surrounding the detection and remediation of a new generation of agrochemical contaminants. The book defines the occurrence, sources, types and effects of agrochemicals, including herbicides, insecticides, fungicides and soil fumigants in the environment. The book covers both advanced physical and chemical methods for the abatement of these emerging contaminants in environmental media. Environmental Engineers and Researchers will find this to be a valuable reference on advanced processes for resource recovery, including nanotechnology for the recovery of phosphate from fertilizer industry wastewater. Provides the latest physical and chemical methods used for the abatement of chemical fertilizers and pesticides Covers genetically engineered microbes for the remediation of a wide range of agrochemicals Presents methods for determining the occurrence, sources, types and effects of agrochemical on environmental media Includes unique case studies from across the globe

Download or read book The Chemical Dependence Treatment Planner written by Robert R. Perkinson and published by . This book was released on 1998 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This valuable professional resource makes it easier than ever for professionals who treat chemically dependent patients to write polished, effective treatment plans that satisfy all the demands of HMOs, managed care companies, third-party payers, and state and federal review agencies. This comprehensive planner provides problem definitions, treatment goals, objectives, interventions, and DSM-IV diagnoses for 29 substance-abuse related problems.

Download or read book Physico Chemical Wastewater Treatment and Resource Recovery written by Robina Farooq and published by BoD – Books on Demand. This book was released on 2017-05-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book on Physico-Chemical Treatment of Wastewater and Resource Recovery provides an efficient and low-cost solution for remediation of wastewater. This book focuses on physico-chemical treatment via advanced oxidation process, adsorption, its management and recovery of valuable chemicals. It discusses treatment and recovery process for the range of pollutants including BTX, PCB, PCDDs, proteins, phenols, antibiotics, complex organic compounds and metals. The occurrence of persistent pollutants poses deleterious effects on human and environmental health. Simple solutions for recovery of valuable chemicals and water during physico-chemical treatment of wastewater are discussed extensively. This book provides necessary knowledge and experimental studies on emerging physico-chemical processes for reducing water pollution and resource recovery.

Download or read book Water Quality Engineering written by Mark M. Benjamin and published by John Wiley & Sons. This book was released on 2013-06-13 with total page 906 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains the fundamental theory and mathematics of water and wastewater treatment processes By carefully explaining both the underlying theory and the underlying mathematics, this text enables readers to fully grasp the fundamentals of physical and chemical treatment processes for water and wastewater. Throughout the book, the authors use detailed examples to illustrate real-world challenges and their solutions, including step-by-step mathematical calculations. Each chapter ends with a set of problems that enable readers to put their knowledge into practice by developing and analyzing complex processes for the removal of soluble and particulate materials in order to ensure the safety of our water supplies. Designed to give readers a deep understanding of how water treatment processes actually work, Water Quality Engineering explores: Application of mass balances in continuous flow systems, enabling readers to understand and predict changes in water quality Processes for removing soluble contaminants from water, including treatment of municipal and industrial wastes Processes for removing particulate materials from water Membrane processes to remove both soluble and particulate materials Following the discussion of mass balances in continuous flow systems in the first part of the book, the authors explain and analyze water treatment processes in subsequent chapters by setting forth the relevant mass balance for the process, reactor geometry, and flow pattern under consideration. With its many examples and problem sets, Water Quality Engineering is recommended as a textbook for graduate courses in physical and chemical treatment processes for water and wastewater. By drawing together the most recent research findings and industry practices, this text is also recommended for professional environmental engineers in search of a contemporary perspective on water and wastewater treatment processes.

Download or read book Water Treatment Unit Processes written by David W. Hendricks and published by CRC Press. This book was released on 2018-10-03 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The unit process approach, common in the field of chemical engineering, was introduced about 1962 to the field of environmental engineering. An understanding of unit processes is the foundation for continued learning and for designing treatment systems. The time is ripe for a new textbook that delineates the role of unit process principles in environmental engineering. Suitable for a two-semester course, Water Treatment Unit Processes: Physical and Chemical provides the grounding in the underlying principles of each unit process that students need in order to link theory to practice. Bridging the gap between scientific principles and engineering practice, the book covers approaches that are common to all unit processes as well as principles that characterize each unit process. Integrating theory into algorithms for practice, Professor Hendricks emphasizes the fundamentals, using simple explanations and avoiding models that are too complex mathematically, allowing students to assimilate principles without getting sidelined by excess calculations. Applications of unit processes principles are illustrated by example problems in each chapter. Student problems are provided at the end of each chapter; the solutions manual can be downloaded from the CRC Press Web site. Excel spreadsheets are integrated into the text as tables designated by a "CD" prefix. Certain spreadsheets illustrate the idea of "scenarios" that emphasize the idea that design solutions depend upon assumptions and the interactions between design variables. The spreadsheets can be downloaded from the CRC web site. The book has been designed so that each unit process topic is self-contained, with sidebars and examples throughout the text. Each chapter has subheadings, so that students can scan the pages and identify important topics with little effort. Problems, references, and a glossary are found at the end of each chapter. Most chapters contain downloadable Excel spreadsheets integrated into the text and appendices with additional information. Appendices at the end of the book provide useful reference material on various topics that support the text. This design allows students at different levels to easily navigate through the book and professors to assign pertinent sections in the order they prefer. The book gives your students an understanding of the broader aspects of one of the core areas of the environmental engineering curriculum and knowledge important for the design of treatment systems.

Download or read book Advanced Oxidation Processes for Wastewater Treatment written by Suresh C. Ameta and published by Academic Press. This book was released on 2018-02-19 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Oxidation Processes for Waste Water Treatment: Emerging Green Chemical Technology is a complete resource covering the fundamentals and applications of all Advanced Oxidation Processes (AOPs). This book presents the most up-to-date research on AOPs and makes the argument that AOPs offer an eco-friendly method of wastewater treatment. In addition to an overview of the fundamentals and applications, it details the reactive species involved, along with sections on reactor designs, thus helping readers understand and implement these methods. Presents in-depth coverage of all types of Advanced Oxidation Processes, including Super Critical Water Oxidation, Photo-Fenton and Like Processes Includes a fundamental review, applications, reactive species and reactor designs Reviews applications across waste types, including industrial waste, domestic and municipal sewage, and hospital wastes

Download or read book Chemical Dependency Treatment written by L Donald Mcvinney and published by Routledge. This book was released on 2014-04-04 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most revolutionary, humanistic guide to counteracting chemical dependency on the market, Chemical Dependency Treatment: Innovative Group Approaches presents group models of intervention with substance using and chemically dependent clients across the continuum of care. In it, you’ll find strategies that will help you engineer your own effective group interventions at different stages of the treatment process. Taking into account the ravaging nature of addiction and the rampant spread of AIDS, this book gives you the sensitivity and skills necessary to seek out the earliest possible healing for your beloved family and friends. In Chemical Dependency Treatment, you’ll build upon existing literature on the subject of group work within the chemical dependency field. In doing so, you’ll glean your own individualized expertise from this excellent collection of essays and qualify yourself to orchestrate compassionate and holistic chemical dependency interventions. You’ll get detailed information about: early community-based intervention for injected drug use (IDU) the transition from inpatient to outpatient status for chemically dependent clients psychoeducational help for chemically dependent gays and lesbians strategies for hospital-based early recovery groups for HIV-infected inner-city clients treatment during the early phases of outpatient therapy outpatient group psychotherapy with cluster-B personality disordered men multiple oppression in group psychotherapy If you know someone who is chemically dependent, or if you’re interested in becoming more informed about what your family or community can do to quell the epidemic of chemical dependency, Chemical Dependency Treatment will put you on the sure pathway to a more caring, more immediate group intervention.

Download or read book An Evaluation of Chemical Treatment at the Sissonville Public Service District Water Treatment Plant written by Po Sen Chen and published by . This book was released on 1988 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemical Feed Field Guide for Treatment Plant Operators written by William Lauer and published by American Water Works Association. This book was released on 2011-01-12 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surface Treatment in Bonding Technology written by Anna Rudawska and published by Academic Press. This book was released on 2019-04-15 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Treatment in Bonding Technology provides valuable advice on surface treatment methods, modern measuring devices, and the appropriate experimentation techniques that are essential to create strong joints with a reliable service life. The book's focus is on the detailed and up-to-date analysis of surface treatment methods for metallic and polymer substrates. An analysis of factors affecting the surface preparation stage, together with advice on selection, is also provided. Essential theory is combined with experimentation techniques and industry practice to provide a guide that is both practical and academically rigorous. Including a general introduction to bonding, as well as coverage of mechanical, chemical and electrochemical methods, this book is the ideal primer for anyone working with or researching adhesive bonding. Provides detailed descriptions of surface treatments and their mechanisms that will help readers build a deep understanding of these fundamental techniques Includes a thorough survey of recent advances in research in surface treatments of metals and polymers Provides technical advice on experimental testing methods throughout the book

Download or read book Applications of New Concepts of Physical Chemical Wastewater Treatment written by W.W. Eckenfelder and published by Elsevier. This book was released on 2013-10-22 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of New Concepts of Physical-Chemical Wastewater Treatment deals with novel concepts of physical-chemical wastewater treatment, with particular reference to their engineering applications. Topics covered range from ultrahigh rate filtration of municipal wastewater to the applicability of carbon adsorption in the treatment of petrochemical wastewaters, along with regeneration of activated carbon and dewatering of physical-chemical sludges. Comprised of 31 chapters, this volume begins with a discussion on the use of physical-chemical methods for the treatment of municipal wastes and for direct wastewater treatment. The following chapters focus on the interrelationships between biological treatment and physicochemical treatment; some problems associated with the treatment of sewage by non-biological processes; treatment of wastes generated by metal finishing and engineering industries; and the principles and practice of granular carbon reactivation. The precipitation of calcium phosphate in wastewaters is also considered, together with the use of surface stirrers for ammonia desorption from ponds. This book will be a valuable resource for chemists, engineers, government officials, and environmental policymakers.