Download or read book Methods for Wastewater Characterization in Activated Sludge Modelling written by Henryk Melcer and published by IWA Publishing. This book was released on 2004-11-01 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical modeling is a useful tool for the design, analysis and control of wastewater treatment systems. The activated sludge process is one of the most common processes used in wastewater treatment, and therefore is a particularly important candidate for the application of mathematical models. In the 1980s, a task group organized by the International Association on Water Quality (IAWQ) developed a conceptual model of the activated sludge process, which has become an industry-wide standard for the development of computer-based activated sludge models. A recent version of the IAWQ model incorporates 19 components, 17 processes, and numerous rate and stoichiometric coefficients. It is difficult and costly to quantify all of the necessary coefficients for any given application of the model; consequently, it is important to identify the most critical wastewater and biomass components and the relevant coefficients to be quantified for the most common uses of the model. It is also important to provide guidance to potential model users on the use of default and/or estimated values for the remaining parameters.

Download or read book Characterization of the Activated Sludge Process written by Robert D. Bargman and published by . This book was released on 1973 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Activated Sludge Separation Problems written by Valter Tandoi and published by IWA Publishing. This book was released on 2017-09-15 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated Sludge Separation Problems: Theory, Control Measures, Practical Experiences, Second Edition, describes the most common activated sludge separation problems and explains the main reasons for the growth of the different filamentous microorganisms in activated sludge. The book summarizes the identification techniques for important groups of activated sludge microorganisms both based on conventional microscopic analysis and using the biological molecular tools available today (FISH and PCR). This new edition, with 70% new and updated material, also provides explanation of basic activated sludge process principles and of parameters necessary for process control and operation. The theory of secondary clarifies is described to the extent necessary for understanding the construction and operation of secondary clarifiers. The activated sludge reactor and secondary clarifies are treated as one system and the interactions are explained. The wide range of experiences around the world is documented and the methods to avoid the proliferation of these organisms are presented and critically reviewed. Activated Sludge Separation Problems consists of six chapters, presenting up-to-date technical and scientific aspects of these processes. The new edition also features an extended list of literature references for further reading. The book will be a valuable help for students of environmental engineering, wastewater specialists, plant operators and designers of activated sludge plants. It is also useful for specialists in wastewater operation laboratories, especially for those studying activated sludge separation properties.

Download or read book Process Control of Activated Sludge Plants by Microscopic Investigation written by Dick H. Eikelboom and published by IWA Publishing. This book was released on 2000-06-30 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title is only available as a free copy to download from the WaterWiki. To download your free copy of the eBook, click here. The manual can be used independantly but when used in combination with the CD-ROM, it makes a unique tool for process operators to diagnose and solve operational problems. It is also a valuable educational and training package for universities and post experience courses. Click here for more details about the CD-ROM Process stability and final effluent quality largely depend upon the composition of the biomass in an activated sludge plant. Operational problems such as bulking and scum formation occur when the wrong micro-organisms are dominating the sludge population. Microscopic sludge investigation is therefore essential for process control and stable plant operation. The manual outlines the theoretical framework, extensively illustrated with full-colour micrographs. Contents Microscopy Microscopic sludge investigation Characteristics of activated sludge flocs Filamentous micro-organisms Protozoa and metazoa Conclusions of microscopic sludge investigation The activated sludge process Operational problems Bulking sludge Scum formation

Download or read book Industrial Wastewater Treatment by Activated Sludge written by Derin Orhon and published by IWA Publishing. This book was released on 2009-02-02 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial pollution is still a major concern and despite its significance, sound and systematic pollution control efforts are very poorly documented. The character and treatability of industrial wastewaters is highly variable and specific for each industrial activity. Biological treatment with activated sludge is the appropriate technology for industrial wastewaters from several major industrial sectors. Industrial Wastewater Treatment by Activated Sludge deals with the activated sludge treatment of industrial wastewaters by considering conceptual frameworks, methodologies and case studies, in a stepwise manner. The issues related to activated sludge treatment, such as biodegradability based characterization, modeling, assessment of stoichiometric and kinetic parameters and design, as well as the issues of industrial pollution control, e.g. in-plant control, effect of pretreatment, etc. are combined in a way to provide a comprehensive and information-rich view to the reader. By doing so, the book supplies an up-to-date reference for industrial wastewater experts and both graduate and undergraduate students. Industrial Wastewater Treatment by Activated Sludge provides a roadmap, describing the methodologies for the treatment of industrial wastewaters from several major sectors, based on a solid theoretical background. Up to now although valuable separate efforts both on activated sludge and industrial wastewater treatment have been presented, an integrated approach that is crucial to practice has not been available. This gap is filled by this book.

Download or read book Biological Nitrogen Removal Activated Sludge Process in Warm Climates written by Cao Ye Shi and published by IWA Publishing. This book was released on 2008-04-14 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special Offer: Cao Ye Shi Author Set - Buy all three books together and save a total £76! Many Biological Nitrogen Removal (BNR) activated sludge processes in warm climates are conservatively designed, because little systematic investigation has been carried out on the BNR activated sludge process in warm or tropical climates, although many studies under temperate climate conditions are available. This book covers a wide spectrum of mechanistic approaches to deal with BNR activated sludge related issues such as sewage and sludge characterization, dynamic performance of full-scale processes, laboratory simulation and modelling that leads to a mechanistic and more economic design. Recommendations on the operation, upgrading and design of BNR activated sludge process are formulated. This will significantly aid the promotion of nitrogen removal in wastewater treatment plants in warm or tropical climates, particularly in developing countries. The book has three purposes: to make recommendations for appropriate upgrading of existing activated sludge processes and assess the performance of the upgraded activated sludge processes; to explore the feasibility of employing laboratory-scale systems to simulate the performance of full-scale processes; and to use mathematical modelling calibrated with the measured data obtained from the laboratory-scale experimentation to study the performance and the design of full-scale processes. Reports are presented of comprehensive studies on: (i) on-site investigation of the activated sludge processes in three water reclamation plants (WRPs) in Singapore; (ii) laboratory-scale investigations to simulate the performance of full-scale activated sludge processes and to optimize the process design; and (iii) mathematical modelling and simulation with Activated Sludge Model No. 1 (ASM No. 1). Based on these detailed studies, guidelines on the operation, upgrading and design of the BNR activated sludge process in warm climates are presented. Results indicate that the laboratory-scale systems, designed based on the scale-down principles developed in this study and mathematic simulation with the model parameters calibrated by using the data obtained from the laboratory experiment, were able to describe the performance of the full-scale process.The applications of the approaches and principles are not limited to geographic locations and types of pollutants, and thus can reduce significantly the cost and time for the process development of the activated sludge process. This book will be an invaluable reference source for process and design engineers and consultants concerned with biological wastewater treatment as well as researchers in universities and research institutes.

Download or read book Activated Sludge and Aerobic Biofilm Reactors written by Marcos Von Sperling and published by IWA Publishing. This book was released on 2007-03-30 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated Sludge and Aerobic Biofilm Reactors is the fifth volume in the series Biological Wastewater Treatment. The first part of the book is devoted to the activated sludge process, covering the removal of organic matter, nitrogen and phosphorus.A detailed analysis of the biological reactor (aeration tank) and the final sedimentation tanks is provided. The second part of the book covers aerobic biofilm reactors, especially trickling filters, rotating biological contractors and submerged aerated biofilters. For all the systems, the book presents in a clear and informative way the main concepts, working principles, expected removal efficiencies, design criteria, design examples, construction aspects and operational guidelines. About the series: The series is based on a highly acclaimed set of best selling textbooks. This international version is comprised by six textbooks giving a state-of-the-art presentation of the science and technology of biological wastewater treatment. Other titles in the series are: Volume 1: Waste Stabilisation Ponds; Volume 2: Basic Principles of Wastewater Treatment; Volume 3: Waste Stabilization Ponds; Volume 4: Anaerobic Reactors; Volume 6: Sludge Treatment and Disposal

Download or read book Activated Sludge Models written by The IWA Task Group on Mathematical Modelling for Design and Operation of Biological Wastewater Treatment and published by IWA Publishing. This book was released on 2000-05-31 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been produced to give a total overview of the Activated Sludge Model (ASM) family at the start of 2000 and to give the reader easy access to the different models in their original versions. It thus presents ASM1, ASM2, ASM2d and ASM3 together for the first time. Modelling of activated sludge processes has become a common part of the design and operation of wastewater treatment plants. Today models are being used in design, control, teaching and research. Contents ASM3: Introduction, Comparison of ASM1 and ASM3, ASM3: Definition of compounds in the model, ASM3: Definition of processes in the Model, ASM3: Stoichiometry, ASM3: Kinetics, Limitations of ASM3, Aspects of application of ASM3, ASM3C: A Carbon based model, Conclusion ASM 2d: Introduction, Conceptual Approach, ASM 2d, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Limitations, Conclusion ASM 2: Introduction, ASM 2, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Wastewater Characterization for Activated Sludge Processes, Calibration of the ASM 2, Model Limitations, Conclusion, Bibliography ASM 1: Introduction, Method of Model Presentation, Model Incorporating Carbon Oxidation Nitrification and Denitrification, Characterization of Wastewater and Estimation of Parameter Values, Typical Parameter Ranges, Default Values, and Effects of Environmental Factors, Assumptions, Restrictions and Constraints, Implementation of the Activated Sludge Model Scientific and Technical Report No.9

Download or read book Applications of Activated Sludge Models written by Damir Brdjanovic and published by IWA Publishing. This book was released on 2015-02-15 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1982 the International Association on Water Pollution Research and Control (IAWPRC), as it was then called, established a Task Group on Mathematical Modelling for Design and Operation of Activated Sludge Processes. The aim of the Task Group was to create a common platform that could be used for the future development of models for COD and N removal with a minimum of complexity. As the collaborative result of the work of several modelling groups, the Activated Sludge Model No. 1 (ASM1) was published in 1987, exactly 25 years ago. The ASM1 can be considered as the reference model, since this model triggered the general acceptance of wastewater treatment modelling, first in the research community and later on also in practice. ASM1 has become a reference for many scientific and practical projects, and has been implemented (in some cases with modifications) in most of the commercial software available for modelling and simulation of plants for N removal. The models have grown more complex over the years, from ASM1, including N removal processes, to ASM2 (and its variations) including P removal processes, and ASM3 that corrects the deficiencies of ASM1 and is based on a metabolic approach to modelling. So far, ASM1 is the most widely applied. Applications of Activated Sludge Models has been prepared in celebration of 25 years of ASM1 and in tribute to the activated sludge modelling pioneer, the late Professor G.v.R. Marrais. It consists of a dozen of practical applications for ASM models to model development, plant optimization, extension, upgrade, retrofit and troubleshooting, carried out by the members of the Delft modelling group over the last two decades.

Download or read book Environmental Engineering and Activated Sludge Processes written by Olga Sanchez and published by CRC Press. This book was released on 2016-06-22 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title includes a number of Open Access chapters. The activated sludge process is one of the most versatile and commonly used wastewater treatment systems in the world. In the past, when industrial wastewater treatment focused on removing biological oxygen demand and suspended solids, waste water plants needed different processes and technology

Download or read book Characterization of the Activated Sludge Process written by Robert D. Bargman and published by . This book was released on 1973 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Wastewater Characteristics Treatment and Disposal written by Marcos Von Sperling and published by IWA Publishing. This book was released on 2007-03-30 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wastewater Characteristics, Treatment and Disposal is the first volume in the series Biological Wastewater Treatment, presenting an integrated view of water quality and wastewater treatment. The book covers the following topics: wastewater characteristics (flow and major constituents) impact of wastewater discharges to rivers and lakes overview of wastewater treatment systems complementary items in planning studies. This book, with its clear and practical approach, lays the foundations for the topics that are analysed in more detail in the other books of the series. About the series: The series is based on a highly acclaimed set of best selling textbooks. This international version is comprised by six textbooks giving a state-of-the-art presentation of the science and technology of biological wastewater treatment. Other titles in the series are: Volume 2: Basic Principles of Wastewater Treatment; Volume 3: Waste Stabilisation Ponds; Volume 4: Anaerobic Reactors; Volume 5: Activated Sludge and Aerobic Biofilm Reactors; Volume 6: Sludge Treatment and Disposal

Download or read book The Microbiology of Activated Sludge written by Robert J. Seviour and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been a long time in preparation. Initially it grew out of our frustrating attempts over the past ten years to identify the filamentous bacteria seen in large numbers in most activated sludge plants, and the realization that we know very little about them and the other microbial populations in these systems. Unfortunately this book does not provide many answers to the problems these filamentous bacteria can cause, but we hope it might encourage microbiologists and engineers to communi cate more with each other and to spend some time trying to understand the tax onomy, ecology and physiology of activated sludge microbes. It is now very timely, for example, to try to provide these filamentous bacteria with proper taxonomically valid names and to determine their correct place in bacterial classifications. This book is not meant to compete directly with the books by Gray (1989, 1990) nor the excellent manual published by Jenkins and coworkers (1993b), which has been invaluable to us and others trying to identify filamentous bacteria. Wanner's book (1994a) also provides an excellent account of the problems of bulking and foaming caused by filamentous bacteria. These publications and others by Eikelboom's group have made an enormous contribution to the study of filamentous bacteria, and will con tinue to do so.

Download or read book Activated Sludge written by Wesley Eckenfelder and published by CRC Press. This book was released on 1998-03-11 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past, industrial wastewater treatment primarily focused on the removal of BOD and suspended solids. In recent years, however, the focus has changed to aquatic toxicity, priority pollutants, and volatile organics. This required changes in how we design and operate biological treatment plants. Many existing plants must be retrofitted. New approaches to meet new requirements are discussed in detail. The authors, with a combined experience of sixty years, have presented case studies for a wide variety of industrial wastewaters including pulp and paper, food processing, chemical and pharmaceuticals, and textile wastewaters. Data interpretation and process design are developed through the use of seventeen examples. Procedures for the laboratory and pilot plant generation of process design data are presented. Emphasis is placed on meeting the many new regulations governing industrial wastewater discharges.

Download or read book VOC Emissions from Wastewater Treatment Plants written by Prakasam Tata and published by CRC Press. This book was released on 2003-03-26 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: VOC Emissions from Wastewater Treatment Plants: Characterization, Control, and Compliance provides comprehensive information on the subject of Volatile Organic Compound (VOC) emissions from publicly owned treatment works (POTWs). It describes models of emission factors so that readers will know what to expect when models need to be used for the est

Download or read book Microbial Ecology of Wastewater Treatment Plants written by Maulin P. Shah and published by Elsevier. This book was released on 2021-05-15 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microbial Ecology of Wastewater Treatment Plants presents different methods and techniques used in microbial ecology to study the interactions and evolution of microbial populations in WWTPs, particularly the new molecular tools developed in the last decades. These molecular biology-based methods (e.g. studies of DNA, RNA and proteins) provide a high resolution of information compared to traditional ways of studying microbial wastewater populations, such as microscopic examination and culture-based methods. In addition, this book addresses the ability of microorganisms to degrade environmental pollutants. - Describes application of different Omics tools in Wastewater treatment plants (WWTPs) - Demonstrates the role of microorganisms in WWTPs - Includes discussions on the microbial ecology of WWTPs - Covers the microbial diversity of activated sludge - Emphasizes cutting-edge molecular tools

Download or read book Biological Wastewater Treatment written by Mogens Henze and published by IWA Publishing. This book was released on 2008-09-01 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: For information on the online course in Biological Wastewater Treatment from UNESCO-IHE, visit: http://www.iwapublishing.co.uk/books/biological-wastewater-treatment-online-course-principles-modeling-and-design Over the past twenty years, the knowledge and understanding of wastewater treatment have advanced extensively and moved away from empirically-based approaches to a first principles approach embracing chemistry, microbiology, physical and bioprocess engineering, and mathematics. Many of these advances have matured to the degree that they have been codified into mathematical models for simulation with computers. For a new generation of young scientists and engineers entering the wastewater treatment profession, the quantity, complexity and diversity of these new developments can be overwhelming, particularly in developing countries where access is not readily available to advanced level tertiary education courses in wastewater treatment. Biological Wastewater Treatment addresses this deficiency. It assembles and integrates the postgraduate course material of a dozen or so professors from research groups around the world that have made significant contributions to the advances in wastewater treatment. The book forms part of an internet-based curriculum in biological wastewater treatment which also includes: Summarized lecture handouts of the topics covered in book Filmed lectures by the author professors Tutorial exercises for students self-learning Upon completion of this curriculum the modern approach of modelling and simulation to wastewater treatment plant design and operation, be it activated sludge, biological nitrogen and phosphorus removal, secondary settling tanks or biofilm systems, can be embraced with deeper insight, advanced knowledge and greater confidence.