Download or read book Mechanical Properties of Materials written by Joshua Pelleg and published by Springer Science & Business Media. This book was released on 2012-06-13 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of mechanical behavior has been in the front line of basic studies in engineering curricula for many years. This textbook was written for engineering students with the aim of presenting, in a relatively simple manner, the basic concepts of mechanical behavior in solid materials. A second aim of the book is to guide students in their laboratory experiments by helping them to understand their observations in parallel with the lectures of their various courses; therefore the first chapter of the book is devoted to mechanical testing. Another aim of the book is to provide practicing engineers with basic help to bridge the gap of time that has passed from their graduation up to their actual involvement in engineering work. The book also serves as the basis for more advanced studies and seminars when pursuing courses on a graduate level. The content of this textbook and the topics discussed correspond to courses that are usually taught in universities and colleges all over the world, but with a different and more modern approach. It is however unique by the inclusion of an extensive chapter on mechanical behavior in the micron and submicron/nanometer range. Mechanical deformation phenomena are explained and often related to the presence of dislocations in structures. Many practical illustrations are provided representing various observations encountered in actual structures of particularly technical significance. A comprehensive list of references at the end of each chapter is included to provide a broad basis for further studying the subject.
Download or read book Properties and Characterization of Modern Materials written by Andreas Öchsner and published by Springer. This book was released on 2016-07-30 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on robust characterization and prediction methods for materials in technical applications as well as the materials’ safety features during operation. In particular, it presents methods for reliably predicting material properties, an aspect that is becoming increasingly important as engineering materials are pushed closer and closer to their limits to boost the performance of machines and structures. To increase their engineering value, components are now designed under the consideration of their multiphysical properties and functions, which requires much more intensive investigation and characterization of these materials. The materials covered in this monograph range from metal-based groups such as lightweight alloys, to advanced high-strength steels and modern titanium alloys. Furthermore, a wide range of polymers and composite materials (e.g. with micro- and nanoparticles or fibres) is covered. The book explores methods for property prediction from classical mechanical characterization-related fields of application, for example, from wear, creep, fatigue and crack growth, to specific surface properties, to dielectric and electrochemical values. As in all fields of modern engineering, the process is often accompanied by numerical simulation and optimization.
Download or read book Elements of Metallurgy and Engineering Alloys written by Flake C. Campbell and published by ASM International. This book was released on 2008-01-01 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical reference provides thorough and systematic coverage on both basic metallurgy and the practical engineering aspects of metallic material selection and application.
Download or read book Additive and Traditionally Manufactured Components written by Joshua Pelleg and published by Elsevier. This book was released on 2020-04-30 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive and Traditionally Manufactured Components: A Comparative Analysis of Mechanical Properties looks at the mechanical properties of materials produced by additive manufacturing (AM) and compares them with conventional methods. Since the production of objects by AM techniques can used in a broad array of materials, the alloys presented are the ones most commonly produced by AM - Al alloys, Ti alloys and steel. The book explores the six main types of techniques: Fused Deposition Method (FDM), Powder Bed Fusion (PBF), Inkjet Printing, Stereolithography (SLA), Direct Energy Deposition (DED) and Laminated Object Manufacturing (LOM), and follows with the techniques being utilized for fabrication. Testing of AM fabricated specimens, including tension, compression and hardness is included, along with a comparison of those results to specimens obtained by conventional fabrication methods. Topics covered include static deformation, time dependent deformation (creep), cyclic deformation (fatigue) and fracture in specimens. The book concludes with a review of the mechanical properties of nanoscale specimens obtained by AM.
Download or read book Micro and Macromechanical Properties of Materials written by Yichun Zhou and published by CRC Press. This book was released on 2013-09-26 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an English translation of a Chinese textbook that has been designated a national planned university textbook, the highest award given to scientific textbooks in China. The book provides a complete overview of mechanical properties and fracture mechanics in materials science, mechanics, and physics. It details the macro- and micro-mechanical properties of metal structural materials, nonmetal structural materials, and various functional materials. It also discusses the macro and micro failure mechanism under different loadings and contains research results on thin film mechanics, smart material mechanics, and more.
Download or read book Combinatorial Materials Synthesis written by Xiao-Dong Xiang and published by CRC Press. This book was released on 2003-08-19 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pioneered by the pharmaceutical industry and adapted for the purposes of materials science and engineering, the combinatorial method is now widely considered a watershed in the accelerated discovery, development, and optimization of new materials. Combinatorial Materials Synthesis reveals the gears behind combinatorial materials chemistry and thin-film technology, and discusses the prime techniques involved in synthesis and property determination for experimentation with a variety of materials. Funneling historic innovations into one source, the book explores core approaches to synthesis and rapid characterization techniques for work with combinatorial materials libraries.
Download or read book Mechanical Properties of Engineered Materials written by Wole Soboyejo and published by CRC Press. This book was released on 2002-11-20 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring in-depth discussions on tensile and compressive properties, shear properties, strength, hardness, environmental effects, and creep crack growth, "Mechanical Properties of Engineered Materials" considers computation of principal stresses and strains, mechanical testing, plasticity in ceramics, metals, intermetallics, and polymers, materials selection for thermal shock resistance, the analysis of failure mechanisms such as fatigue, fracture, and creep, and fatigue life prediction. It is a top-shelf reference for professionals and students in materials, chemical, mechanical, corrosion, industrial, civil, and maintenance engineering; and surface chemistry.
Download or read book Strength of Materials written by D. K. Singh and published by Springer Nature. This book was released on 2020-12-11 with total page 905 pages. Available in PDF, EPUB and Kindle. Book excerpt: div="" style=""This fourth edition focuses on the basics and advanced topics in strength of materials. This is an essential guide to students, as several chapters have been rewritten and their scope has expanded. Four new chapters highlighting combined loadings, unsymmetrical bending and shear centre, fixed beams, and rotating rings, discs and cylinders have been added. New solved examples, multiple choice questions and short answer questions have been added to augment learning. The entire text has been thoroughly revised and updated to eliminate the possible errors left out in the previous editions of the book. This textbook is ideal for the students of Mechanical and Civil Engineering. ^
Download or read book Characterization of Biomaterials written by Mangal Roy and published by Elsevier Inc. Chapters. This book was released on 2013-03-12 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: In joint replacement surgery with suboptimal bone, allograft materials are often used to achieve biological fixation of the metallic implant to the host bone and reducing the implant fixation time. The most commonly used techniques are cemented and hydroxyapatite (HA)-coated metallic implants. Typically, HA coatings are suggested for patients with better bone stock, whereas recommended implant fixation process for most other osteoporotic patients is bone cements. In general, there is a long-standing need to improve the performance of hip and other devices for longer in vivo implant lifetime that can help in reducing the number of revision surgeries, as well as minimizing physical and mental trauma to the patient. To achieve these goals, it is important to understand the mechanical and biological properties of coatings that can influence not only its short- and long-term bioactivity but also life span in vivo. Over the years, it has been recognized that the stability of a coated implant is governed by its physical and mechanical properties. A coating that separates from the implant provides no advantage over an uncoated implant and undesirable due to problems with debris materials, which can lead to osteolysis. Therefore, it is important to properly characterize the coated implants in terms of its physical and mechanical properties. In this chapter, specific details on coating characterization techniques including sample dimensions, sample preparation, experimental procedure and data interpretation are discussed. In particular, the standards and requirements of regulatory organizations are presented elucidating the significance and use of each characterization. It is important to appreciate that mechanical properties of coatings can only be determined with certain coating specification such as coating thickness. This chapter is designed even for non-experts to follow mechanical property characterizations of coatings on medical implants.
Download or read book Materials Characterization written by Naryanaswami (Mohan) Ranganathan and published by CRC Press. This book was released on 2016-01-05 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, which is a result of a coordinated effort by 22 researchers from five different countries, addresses the methods of determining the local and global mechanical properties of a variety of materials: metals, plastics, rubber, and ceramics. The first chapter treats nanoindentation techniques comprehensively. Chapter 2 concerns polymer surfa
Download or read book Mechanical Characterization Using Digital Image Correlation written by Matthias Merzkirch and published by Springer Nature. This book was released on 2021-12-14 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, a precise treatment of the experimental characterization of advanced composite materials using Digital Image Correlation (DIC) is presented. The text explains test methods, testing setup with 2D- and stereo-DIC, specimen preparation and patterning, testing analysis and data reduction schemes to determine and to compare mechanical properties, such as modulus, strength and fracture toughness of advanced composite materials. Sensitivity and uncertainty studies on the DIC calculated data and mechanical properties for a detailed engineering-based understanding are covered instead of idealized theories and sugarcoated results. The book provides students, instructors, researchers and engineers in industrial or government institutions, and practitioners working in the field of experimental/applied structural mechanics of materials a myriad of color figures from DIC measurements for better explanation, datasets of material properties serving as input parameters for analytical modelling, raw data and computer codes for data reduction, illustrative graphs for teaching purposes, practice exercises with solutions provided online and extensive references to the literature at the end of each stand-alone chapter.
Download or read book Energetic Materials written by Ulrich Teipel and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incorporation of particular components with specialized properties allows one to tailor the end product's properties. For instance, the sensitivity, burning behavior, thermal or mechanical properties or stability of energetic materials can be affected and even controllably varied through incorporation of such ingredients. This book examines particle technologies as applied to energetic materials such as propellants and explosives, thus filling a void in the literature on this subject. Following an introduction covering general features of energetic materials, the first section of this book describes methods of manufacturing particulate energetic materials, including size reduction, crystallization, atomization, particle formation using supercritical fluids and microencapsulation, agglomeration phenomena, special considerations in mixing explosive particles and the production of nanoparticles. The second section discusses the characterization of particulate materials. Techniques and methods such as particle size analysis, morphology elucidation and the determination of chemical and thermal properties are presented. The wettability of powders and rheological behavior of suspensions and solids are also considered. Furthermore, methods of determining the performance of particular energetic materials are described. Each chapter deals with fundamentals and application possibilities of the various methods presented, with particular emphasis on issues applicable to particulate energetic materials. The book is thus equally relevant for chemists, physicists, material scientists, chemical and mechanical engineers and anyone interested or engaged in particle processing and characterization technologies.
Download or read book Mechanical Properties and Working of Metals and Alloys written by Amit Bhaduri and published by Springer. This book was released on 2018-05-12 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to serve as core text or handy reference on two key areas of metallic materials: (i) mechanical behavior and properties evaluated by mechanical testing; and (ii) different types of metal working or forming operations to produce useful shapes. The book consists of 16 chapters which are divided into two parts. The first part contains nine chapters which describe tension (including elastic stress – strain relation, relevant theory of plasticity, and strengthening methods), compression, hardness, bending, torsion – pure shear, impact loading, creep and stress rupture, fatigue, and fracture. The second part is composed of seven chapters and covers fundamentals of mechanical working, forging, rolling, extrusion, drawing of flat strip, round bar, and tube, deep drawing, and high-energy rate forming. The book comprises an exhaustive description of mechanical properties evaluated by testing of metals and metal working in sufficient depth and with reasonably wide coverage. The book is written in an easy-to-understand manner and includes many solved problems. More than 150 numerical problems and many multiple choice questions as exercise along with their answers have also been provided. The mathematical analyses are well elaborated without skipping any intermediate steps. Slab method of analysis or free-body equilibrium approach is used for the analytical treatment of mechanical working processes. For hot working processes, different frictional conditions (sliding, sticking and mixed sticking–sliding) have been considered to estimate the deformation loads. In addition to the slab method of analysis, this book also contains slip-line field theory, its application to the static system, and the steady state motion, Further, this book includes upper-bound theorem, and upper-bound solutions for indentation, compression, extrusion and strip drawing. The book can be used to teach graduate and undergraduate courses offered to students of mechanical, aerospace, production, manufacturing and metallurgical engineering disciplines. The book can also be used for metallurgists and practicing engineers in industry and development courses in the metallurgy and metallic manufacturing industries.
Download or read book Mechanical Properties of Materials at Low Temperatures written by D. Wigley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: In writing this monograph, the aim has been to consider the mechanical properties of the wide range of materials now available in such a way as to start with the fundamental nature of these properties and to follow the discussion through to the point at which the reader is able to comprehend the significance or otherwise of the large amounts of data now available in design manuals and other compilations. In short, it is hoped that this volume will be used as a companion to these data compilations and as an aid to their interpretation. In attempting to cover such a wide field, a large degree of selection has been necessary, as complete volumes have been written on topics which here have had to be covered in a few pages or less. It is inevitable that not everyone will agree with the choice made, especially if it is his own subject which has been discussed rather briefly, and the author accepts full res ponsibility for the selection made. The book is written at a level which should be easily followed by a university graduate in science or engineer ing, although, if his background has not included a course in materials science, some groundwork may be lacking.
Download or read book Applied Mechanics of Solids written by Allan F. Bower and published by CRC Press. This book was released on 2009-10-05 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern computer simulations make stress analysis easy. As they continue to replace classical mathematical methods of analysis, these software programs require users to have a solid understanding of the fundamental principles on which they are based.Develop Intuitive Ability to Identify and Avoid Physically Meaningless PredictionsApplied Mechanics o
Download or read book Structural and Failure Mechanics of Sandwich Composites written by L.A. Carlsson and published by Springer Science & Business Media. This book was released on 2011-04-26 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Structural and Failure Mechanics of Sandwich Composites" by Leif A. Carlsson and George A. Kardomateas focuses on some important deformation and failure modes of sandwich panels such as global buckling, wrinkling and local instabilities, and face/core debonding. The book also provides the mechanics background necessary for understanding deformation and failure mechanisms in sandwich panels and the response of sandwich structural parts to a variety of loadings. Specifically, first-order and high-order sandwich panel theories, and three-dimensional elasticity solutions for the structural behavior outlined in some detail. Elasticity analysis can serve as a benchmark for judging the accuracy of simplified sandwich plate, shell and beam theories. Furthermore, the book reviews test methods developed for the characterization of the constituent face and core materials, and sandwich beams and plates. The characterization of face/core debonding is a major topic of this text, and analysis methods based on fracture mechanics are described and applied to several contemporary test specimens. Test methods and results documented in the literature are included and discussed. The book will benefit structural and materials engineers and researchers with the desire to learn more about structural behavior, failure mechanisms, fracture mechanics and damage tolerance of sandwich structures.
Download or read book Ceramics written by Dietrich Munz and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives a description of the failure phenomena of ceramic materials under mechanical loading, the methods to determine their properties, and the principles for material selection. The book presents fracture mechanical and statistical principles and their application to describe the scatter of strength and lifetime, while special chapters are devoted to creep behaviour, multiaxial failure criteria and thermal shock behaviour. XXXXXXX Neuer Text Describing how ceramic materials fracture and fail under mechanical loading, this book provides methods for determining the properties of ceramics, and gives criteria for selecting ceramic materials for particular applications. It also examines the fracture-mechanical and statistical principles and their use in understanding the strength and durability of ceramics. Special chapters are devoted to creep behavior, criteria for multiaxial failure, and behavior under thermal shock. Readers will gain insight into the design of reliable ceramic components.
