Download or read book Characterization of Fretting Fatigue Process Volume Using Finite Element Analysis written by DR. Swalla and published by . This book was released on 2003 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fretting fatigue damage is characterized by the nucleation of cracks very early in the life of a component along a critical plane at an oblique angle to the contact surface. The number of cycles to fretting fatigue crack nucleation as well as the orientation of the initial crack critical plane is strongly influenced by the large stress and strain gradients that occur within a small volume near the fretting contact. Therefore, it is necessary to average the stresses and strains along a critical plane within a fretting fatigue process volume (FFPV) to obtain more reliable crack nucleation predictions. An approach for computing damage in a FFPV using finite element analysis is presented. The life and crack angle prediction is consistent with experimental observations of fretting fatigue tests on PH 13-8 Mo stainless steel. This averaging method allows for the introduction of a length scale for crack nucleation prediction.
Download or read book Fretting Fatigue written by Steven E. Kinyon and published by ASTM International. This book was released on 2003 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains 29 contributions drawn from the Third International Symposium on Fretting Fatigue held in Nagaoka, Japan in May 2001. Sections of the volume address fretting wear and crack initiation; fretting fatigue crack and damage; life prediction; fretting fatigue parameter effects; loading condition
Download or read book Fretting Wear and Fretting Fatigue written by Tomasz Liskiewicz and published by Elsevier. This book was released on 2022-12-07 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fretting Wear and Fretting Fatigue: Fundamental Principles and Applications takes a combined mechanics and materials approach, providing readers with a fundamental understanding of fretting phenomena, related modeling and experimentation techniques, methods for mitigation, and robust examples of practical applications across an array of engineering disciplines. Sections cover the underpinning theories of fretting wear and fretting fatigue, delve into experimentation and modeling methods, and cover a broad array of applications of fretting fatigue and fretting wear, looking at its impacts in medical implants, suspension ropes, bearings, heating exchangers, electrical connectors, and more. Covers theoretical fundamentals, modeling and experimentation techniques, and applications of fretting wear and fatigue Takes a combined mechanics and materials approach Discusses the differences and similarities between fretting wear and fretting fatigue as well as combined experimental and modeling methods Covers applications including medical implants, heat exchangers, bearings, automotive components, gas turbines, and more
Download or read book The Study of Fretting Fatigue Using Finite Element Analysis and Electron Microscopy written by B. Doeser and published by . This book was released on 1981 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fretting Fatigue written by David W. Hoeppner and published by ASTM International. This book was released on 2000 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes 36 of the 40 papers presented at the symposium, and a collection of six keynote papers providing background on the subject. Topics covered include parameter effects, environmental effects, crack nucleation, material and microstructural effects, damage analysis, fracture mechanic
Download or read book Observations and Analysis of Fretting Fatigue Crack Initiation and Propagation written by J-Q Xu and published by . This book was released on 2003 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many factors, such as the amplitude of the cyclic load, the relative rigidity of components and the frictional condition, play important roles in the fretting fatigue process. This study has focused on the local singular stress field at the fatigue crack tip or at the contact edge where the initial crack occurs, based on the numerical analysis results with the use of finite element method (FEM) program ABAQUS. It is proposed that all the effect of test conditions can be contained by the local stress field, which would dominate the fatigue crack initiation and propagation. By comparing with the experimental results, it was found that the initial fatigue crack should occur at the point of maximum shear stress range near the contact edge, and would propagate in the direction of maximum tangential stress range. An analytical simulation of fretting fatigue crack propagation has been carried out. It was found that a fatigue crack was always under the mixed mode conditions, the fracture path could be estimated by the maximum tangential stress theory (???max), and the propagation curve could be characterized by the stress intensity factor range in this direction ( ?K??max).
Download or read book Verification of Analytical Models in a Fracture Mechanics Based Approach to Modeling Fretting Fatigue written by Nichole Young and published by . This book was released on 2006 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fracture mechanics-based approach which uses Mode I Stress Intensity Factor (SIFs) to estimate the influence of fretting fatigue loads (which can consist of normal and shear contact loads, as well as bulk or far-field loads) has been proposed by Rooke and Jones ("Stress Intensity Factors in Fretting Fatigue," Journal of Strain Analysis, Vol. 14, No. 1, 1979, pp. 1-6), who proposed a cracking scenario in which a single edge crack propagates to failure under the influence of the contact and bulk stress damage drivers. A major shortcoming of this approach is that the underlying analytical method and closed form integral equations assume that the single edge crack propagates into a semi-infinite domain or half-space. Significant differences in the stress states for finite width domains have been postulated by Fellows et al. ("Contact Stresses in a Moderately Then Strip (with Particular Reference to Fretting Experiments," Wear, Vol. 185, 1995, pp. 235-238) among others. SIFs can be roughly correlated with stress; therefore variations in the stress states normally result in variations in the SIFs. Variations in the SIFs due to shear and normal contact loads, and due to finite width effects are quantitatively evaluated with the finite element method (FEM). Results with the finite element approach are compared to those using the Rooke and Jones method, as well as other results from the open literature.
Download or read book Fretting Fatigue Prediction Using Finite Element Methods written by C. H. Shangkuan and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics of Fretting Fatigue written by D.A. Hills and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failures of many mechanical components in service result from fatigue. The cracks which grow may either originate from some pre-existing macroscopic defect, or, if the component is of high integrity but highly stressed, a region of localized stress concentration. In turn, such concentrators may be caused by some minute defect, such as a tiny inclusion, or inadvertent machining damage. Another source of surface damage which may exist between notionally 'bonded' components is associated with minute relative motion along the interface, brought about usually be cyclic tangential loading. Such fretting damage is quite insidious, and may lead to many kinds of problems such as wear, but it is its influence on the promotion of embryo cracks with which we are concerned here. When the presence of fretting is associated with decreased fatigue performance the effect is known as fretting fatigue. Fretting fatigue is a subject drawing equally on materials science and applied mechanics, but it is the intention in this book to concentrate attention entirely on the latter aspects, in a search for the quantification of the influence of fretting on both crack nucleation and propagation. There have been very few previous texts in this area, and the present volume seeks to cover five principal areas; (a) The modelling of contact problems including partial slip under tangentialloading, which produces the surface damage. (b) The modelling of short cracks by rigorous methods which deal effectively with steep stress gradients, kinking and closure. (c) The experimental simulation of fretting fatigue.
Download or read book On the Standardization of Fretting Fatigue Test Method Modeling Issues Related to the Thermal Constriction Phenomenon and Prediction of Contact Temperature written by MH. Attia and published by . This book was released on 2000 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: The temperature field in the contact zone has a significant effect on the material microstructure, its properties, the oxidation process, and the thermal contact stresses. To standardize fretting fatigue tests, one has to be able to predict and control the contact temperature. Since direct temperature measurement is practically impossible, analytical models are required to estimate the friction-induced temperatures rise under fretting conditions. The main objective of the present work is to model the thermal constriction phenomenon in fretting fatigue and wear processes, considering the roughness and waviness of contacting surfaces. These asperity-scale models can be combined with large scale analyses, e.g. finite element method, to account for the thermal characteristics of the whole tribo-system, its boundary conditions, as well as the spatial variation in the slip amplitude and coefficient of friction over the interface. The debatable question on whether the contact temperature in fretting fatigue is significant is addressed, considering a wide range of materials and applied loads. The analysis showed that the randomness of the contact size may substantially increase the micro-constriction impedance of the fretting interface. The paper is concluded with recommendations for future work to experimentally validate these models, and to examine the effect of the spatial maldistribution of the micro-contacts, and the effect of surface oxide on the contact temperature prediction.
Download or read book The Theory of Critical Distances written by David Taylor and published by Elsevier. This book was released on 2010-07-07 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Critical distance methods are extremely useful for predicting fracture and fatigue in engineering components. They also represent an important development in the theory of fracture mechanics. Despite being in use for over fifty years in some fields, there has never been a book about these methods – until now. So why now? Because the increasing use of computer-aided stress analysis (by FEA and other techniques) has made these methods extremely easy to use in practical situations. This is turn has prompted researchers to re-examine the underlying theory with renewed interest. The Theory of Critical Distances begins with a general introduction to the phenomena of mechanical failure in materials: a basic understanding of solid mechanics and materials engineering is assumed, though appropriate introductory references are provided where necessary. After a simple explanation of how to use critical distance methods, and a more detailed exposition of the methods including their history and classification, the book continues by showing examples of how critical distance approaches can be applied to predict fracture and fatigue in different classes of materials. Subsequent chapters include some more complex theoretical areas, such as multiaxial loading and contact problems, and a range of practical examples using case studies of real engineering components taken from the author’s own consultancy work. The Theory of Critical Distances will be of interest to a range of readers, from academic researchers concerned with the theoretical basis of the subject, to industrial engineers who wish to incorporate the method into modern computer-aided design and analysis. Comprehensive collection of published data, plus new data from the author's own laboratories A simple 'how-to-do-it' exposition of the method, plus examples and case studies Detailed theoretical treatment Covers all classes of materials: metals, polymers, ceramics and composites Includes fracture, fatigue, fretting, size effects and multiaxial loading
Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.
Download or read book Characterization of Fretting Fatigue Damage by SEM Analysis written by G. L. Goss and published by . This book was released on with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 9th International Conference on Fracture Fatigue and Wear written by Magd Abdel Wahab and published by Springer Nature. This book was released on 2022-03-11 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings gather a selection of peer-reviewed papers presented at the 9th International Conference on Fracture Fatigue and Wear (FFW 2021), held in the city of Ghent, Belgium on 2–3 August 2021. The contributions, prepared by international scientists and engineers, cover the latest advances in and innovative applications of fracture mechanics, fatigue of materials, tribology, and wear of materials. In addition, they discuss industrial applications and cover theoretical and analytical methods, numerical simulations and experimental techniques. The book is intended for academics, including graduate students and researchers, as well as industrial practitioners working in the areas of fracture fatigue and wear.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 1028 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this jOint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 40 (thesis year 1995) a total of 10,746 thesis titles from 19 Canadian and 144 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 40 reports theses submitted in 1995, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.
Download or read book Characterization of Fretting Fatigue Damage written by Roger Keith Reeves and published by . This book was released on 1974 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt:
