Download or read book Characterization of Catalytic Materials written by Israel E. Wachs and published by Momentum Press. This book was released on 2010 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterogeneous catalysis has undergone a revolutionary change in the past two decades due to the development of sophisticated characterization methods that provide fundamental information about the catalyst bulk structures, surfaces, and their properties. For the first time, these characterization methods have allowed researchers to "see" the surfaces of catalytic materials, their bulk structures (crystalline as well as amorphous phases), the influence of the process conditions on the catalytic material, as well as the effect of different synthesis methods. This new information has tremendously advanced our understanding of catalytic materials and their properties. These characterization methods have become our "eyes" and are indispensible in the development of new catalytic materials. It is hard to conceive of a modern heterogeneous catalysis activity, be it research or manufacturing, without the aid of these new characterization techniques.
Download or read book Catalyst Characterization written by Boris Imelik and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: to the Fundamental and Applied Catalysis Series Catalysis is important academically and industrially. It plays an essential role in the manufacture of a wide range of products, from gasoline and plastics to fertilizers and herbicides, which would otherwise be unobtainable or prohibitive ly expensive. There are few chemical-or oil-based material items in modern society that do not depend in some way on a catalytic stage in their manufacture. Apart from manufacturing processes, catalysis is finding other important and over-increasing uses; for example, successful applications of catalysis in the control ofpollution and its use in environmental control are certain to in crease in the future. The commercial import an ce of catalysis and the diverse intellectual challenges of catalytic phenomena have stimulated study by a broad spectrum of scientists including chemists, physicists, chemical engineers, and material scientists. Increasing research activity over the years has brought deeper levels of understanding, and these have been associated with a continually growing amount of published material. As recentlyas sixty years ago, Rideal and Taylor could still treat the subject comprehensively in a single volume, but by the 19 50s Emmett required six volumes, and no conventional multivolume text could now cover the whole of catalysis in any depth.
Download or read book Characterization of Solid Materials and Heterogeneous Catalysts 2 Volume Set written by Michel Che and published by John Wiley & Sons. This book was released on 2012-05-14 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume book provides an overview of physical techniques used to characterize the structure of solid materials, on the one hand, and to investigate the reactivity of their surface, on the other. Therefore this book is a must-have for anyone working in fields related to surface reactivity. Among the latter, and because of its most important industrial impact, catalysis has been used as the directing thread of the book. After the preface and a general introduction to physical techniques by M. Che and J.C. Vedrine, two overviews on physical techniques are presented by G. Ertl and Sir J.M. Thomas for investigating model catalysts and porous catalysts, respectively. The book is organized into four parts: Molecular/Local Spectroscopies, Macroscopic Techniques, Characterization of the Fluid Phase (Gas and/ or Liquid), and Advanced Characterization. Each chapter focuses upon the following important themes: overview of the technique, most important parameters to interpret the experimental data, practical details, applications of the technique, particularly during chemical processes, with its advantages and disadvantages, conclusions.
Download or read book Nanoparticle Design and Characterization for Catalytic Applications in Sustainable Chemistry written by Rafael Luque and published by Royal Society of Chemistry. This book was released on 2019-10-05 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an introduction to the preparation and characterisation of nanomaterials and their design for specific catalytic applications.
Download or read book Heterogeneous Catalytic Materials written by Guido Busca and published by Newnes. This book was released on 2014-05-23 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterogeneous Catalytic Materials discusses experimental methods and the latest developments in three areas of research: heterogeneous catalysis; surface chemistry; and the chemistry of catalysts. Catalytic materials are those solids that allow the chemical reaction to occur efficiently and cost-effectively. This book provides you with all necessary information to synthesize, characterize, and relate the properties of a catalyst to its behavior, enabling you to select the appropriate catalyst for the process and reactor system. Oxides (used both as catalysts and as supports for catalysts), mixed and complex oxides and salts, halides, sulfides, carbides, and unsupported and supported metals are all considered. The book encompasses applications in industrial chemistry, refinery, petrochemistry, biomass conversion, energy production, and environmental protection technologies. - Provides a systematic and clear approach of the synthesis, solid state chemistry and surface chemistry of all solid state catalysts - Covers widely used instrumental techniques for catalyst characterization, such as x-ray photoelectron spectroscopy, scanning electron microscopy, and more - Includes characterization methods and lists all catalytic behavior of the solid state catalysts - Discusses new developments in nanocatalysts and their advantages over conventional catalysts
Download or read book Carbon Materials for Catalysis written by Philippe Serp and published by John Wiley & Sons. This book was released on 2009-02-04 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first comprehensive book covering all aspects of the use of carbonaceous materials in heterogeneous catalysis. It covers the preparation and characterization of carbon supports and carbon-supported catalysts; carbon surface chemistry in catalysis; the description of catalytic, photo-catalytic, or electro-catalytic reactions, including the development of new carbon materials such as carbon xerogels, aerogels, or carbon nanotubes; and new carbon-based materials in catalytic or adsorption processes. This is a premier reference for carbon, inorganic, and physical chemists, materials scientists and engineers, chemical engineers, and others.
Download or read book Surface Analysis Methods in Materials Science written by John O'Connor and published by Springer Science & Business Media. This book was released on 2003-04-23 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide to the use of surface analysis techniques, now in its second edition, has expanded to include more techniques, current applications and updated references. It outlines the application of surface analysis techniques to a broad range of studies in materials science and engineering. The book consists of three parts: an extensive introduction to the concepts of surface structure and composition, a techniques section describing 19 techniques and a section on applications. This book is aimed at industrial scientists and engineers in research and development. The level and content of this book make it ideal as a course text for senior undergraduate and postgraduate students in materials science, materials engineering, physics, chemistry and metallurgy.
Download or read book New Materials for Catalytic Applications written by Vasile I. Parvulescu and published by Elsevier. This book was released on 2016-01-28 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Materials for Catalytic Applications proposes the use of both new and existing materials for catalytic applications, such as zeolites, metal oxides, microporous and mesoporous materials, and monocrystals. In addition, metal-oxides are discussed from a new perspective, i.e. nano- and photocatalytic applications. The material presents these concepts with a new focus on strategies in synthesis, synthesis based on a rational design, the correlation between basic properties/potential applications, and new catalytic solutions for acid-base, redox, hydrogenation, photocatalytic reactions, etc. - Presents organometallic concepts for the synthesis of nanocatalysts - Provides a synthesis of new materials following the fluorolytic sol-gel concept - Covers electronic and photocatalytic properties via synthesis of nano-oxide materials - Details the nature of sites in MOFs generating catalytic properties immobilization of triflates in solid matrices for organic reactions
Download or read book Heterogeneous Catalysts written by Wey Yang Teoh and published by John Wiley & Sons. This book was released on 2021-02-23 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents state-of-the-art knowledge of heterogeneous catalysts including new applications in energy and environmental fields This book focuses on emerging techniques in heterogeneous catalysis, from new methodology for catalysts design and synthesis, surface studies and operando spectroscopies, ab initio techniques, to critical catalytic systems as relevant to energy and the environment. It provides the vision of addressing the foreseeable knowledge gap unfilled by classical knowledge in the field. Heterogeneous Catalysts: Advanced Design, Characterization and Applications begins with an overview on the evolution in catalysts synthesis and introduces readers to facets engineering on catalysts; electrochemical synthesis of nanostructured catalytic thin films; and bandgap engineering of semiconductor photocatalysts. Next, it examines how we are gaining a more precise understanding of catalytic events and materials under working conditions. It covers bridging pressure gap in surface catalytic studies; tomography in catalysts design; and resolving catalyst performance at nanoscale via fluorescence microscopy. Quantum approaches to predicting molecular reactions on catalytic surfaces follows that, along with chapters on Density Functional Theory in heterogeneous catalysis; first principles simulation of electrified interfaces in electrochemistry; and high-throughput computational design of novel catalytic materials. The book also discusses embracing the energy and environmental challenges of the 21st century through heterogeneous catalysis and much more. Presents recent developments in heterogeneous catalysis with emphasis on new fundamentals and emerging techniques Offers a comprehensive look at the important aspects of heterogeneous catalysis Provides an applications-oriented, bottoms-up approach to a high-interest subject that plays a vital role in industry and is widely applied in areas related to energy and environment Heterogeneous Catalysts: Advanced Design, Characterization and Applications is an important book for catalytic chemists, materials scientists, surface chemists, physical chemists, inorganic chemists, chemical engineers, and other professionals working in the chemical industry.
Download or read book Advanced Catalytic Materials Current Status and Future Progress written by José Manuel Domínguez-Esquivel and published by Springer Nature. This book was released on 2019-10-02 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents advances in computational methods, experimental synthesis, and advanced characterizations for novel catalytic materials. The authors show how catalytical materials can be used for various engineering oil & gas applications – mainly in low contaminants fuel production. All contributors, describe in detail novel experimental and theoretical techniques techniques and concepts for synthesis, evaluation and scaling catalytic materials and research advances in evaluation, extensive characterization and theoretical modeling using computer assisted methods and algorithms. Describes computational methods, experimental synthesis and advanced characterization for novel catalytic materials; Examines catalytic materials and corresponding engineering applications with a focus on low contaminant fuel production and derivatives; Covers the application of computer assisted quantum mechanical for fundamental understanding of electronic structure of molecular dimension catalytic materials.
Download or read book Nanoparticle Design and Characterization for Catalytic Applications in Sustainable Chemistry written by Rafael Luque and published by Royal Society of Chemistry. This book was released on 2019-05-10 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoparticles exhibit a range of different properties when compared to bulk materials. Their high surface-area to volume ratio makes them particularly attractive for use as catalysts and recent years have seen an explosion of research in this area. The ability to fine-tune the size and structure of nanoparticles means that it is possible to design catalytic materials for improved activity or specificity. As catalysis is one of the key technologies for more sustainable production of both chemicals and energy, the past few years have seen increasing numbers of nanomaterials reported for these applications. Depending on the application, a number of different catalyst synthesis and optimization protocols can be used. This book provides comprehensive links between the design and fabrication method for nanoparticles and their catalytic performance (activity, selectivity and stability) in various applications. Presenting an introduction to the concept of catalyst design and recent developments in the preparation and characterisation of nanomaterials, followed by several chapters on the design of catalysts for specific applications, this book is a valuable resource for researchers working on catalytic reactions, industrial processes and nanomaterial applications.
Download or read book Characterization of Catalytic Materials by EPR Spectrocopy written by James Francis Woodworth and published by . This book was released on 2006 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalyst Characterization Science written by Marvin L. Deviney and published by . This book was released on 1985 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlights the rapid evolution of the surface science of catalysts. Focuses on multi-technique strategies for studying catalytic reactions and catalytic materials. Discusses new developments in electron microscopy, laser-induced desorption, magnetic methods, and new vibrational characterization techniques.
Download or read book Using Advanced Electron Microscopy for the Characterization of Catalytic Materials written by William D. Pyrz and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysis will continue to be vitally important to the advancement and sustainability of industrialized societies. Unfortunately, the petroleum-based resources that currently fuel the energy and consumer product needs of an advancing society are becoming increasingly difficult and expensive to extract as supplies diminish and the quality of sources degrade. Therefore, the development of sustainable energy sources and the improvement of the carbon efficiency of existing chemical processes are critical. Further challenges require that these initiatives are accomplished in an environmentally friendly fashion since the effects of carbon-based emissions are proving to be a serious threat to global climate stability. In this dissertation, materials being developed for sustainable energy and process improvement initiatives are studied. Our approach is to use materials characterization, namely advanced electron microscopy, to analyze the targeted systems at the nano- or Ångstrom-scale with the goal of developing useful relationships between structure, composition, crystalline order, morphology, and catalytic performance. One area of interest is the complex Mo-V-M-O (M=Te, Sb, Ta, Nb) oxide system currently being developed for the selective oxidation/ammoxidation of propane to acrylic acid or acrylonitrile, respectively. Currently, the production of acrylic acid and acrylonitrile rely on propylene-based processes, yet significant cost savings could be realized if the olefin-based feeds could be replaced by paraffin-based ones. The major challenge preventing this feedstock replacement is the development of a suitable paraffin-activating catalyst. Currently, the best candidate is the Mo-V-Nb-Te-O complex oxide catalyst that is composed of two majority phases that are commonly referred to as M1 and M2. However, there is a limited understanding of the roles of each component with respect to how they contribute to catalyst stability and the reaction mechanism. Aberration-corrected electron microscopy was used to systematically examine, atomic column by atomic column, the effect of elemental substitution on the long-range crystalline order, atomic coordinates, and site occupancies of the various formulations such that trends could be developed linking these properties to catalytic yields. To accomplish this task, an algorithm was developed that enabled the direct extraction of atomic coordinates and site occupancies from high-angle annular dark-field (HAADF) images to within 1% and 15% uncertainty, respectively. Furthermore, this general method could be applied to various crystalline systems and may dramatically improve the quality of initial structural models used in Rietveld refinements. Improvement in the quality of starting models may increase the structural and chemical complexity of inorganic structures that can be solved by using "powder methods" alone. In addition to the development of these trends, HAADF analyses also revealed the presence of coherent compositional miscibility gaps, rotational twin domains, and structural intergrowths in the complex Mo-V-M-O oxide system. Other catalytic systems that are addressed in this dissertation include Pd, Ag, and bimetallic Pd-Ag catalysts for the selective hydrogenation of acetylene in excess ethylene, alkali and alkaline earth promoted Ru catalysts for the production of clean hydrogen through the decomposition of ammonia, the production of Pt nanoparticles using dendrimer templates, and Pt-Re bimetallic catalysts for the conversion of glycerol to hydrocarbons and syn gas. In each of these studies, electron microscopy was used as a complimentary tool to synthetic and reaction studies to better understand interactions between the nanoparticles and the support/template, to determine the effect of adding various promoters, or to understand the nanoscale structural and chemical changes associated with the formation of bimetallic nanoparticles. A final area addressed in this dissertation is the interaction between the electron beam and the specimen. In one particular study directed toward the characterization of Ni-Bi nanomaterials, it was discovered that exposure to an intense electron beam initiated particle fragmentation that led to the formation of a field of nanoparticles. Subsequent microscopy studies of the resulting nanoparticle field revealed bimetallic nanoparticles, core-shell structures, Ångstrom-scale atomic clusters, and individual atoms that decorated the surrounding carbon substrate. The identification of these structures along with the analysis of the parent material enabled the development of a fragmentation mechanism.
Download or read book Characterization of Porous Solids VI written by and published by Elsevier. This book was released on 2002-11-14 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 99 of the papers that were presented at the 6th in the series of Symposia on Characterization of Porous Solids held in Alicante, Spain, May 2002. Written by leading international specialists in the subject, the contributions represent an up-to-date and authoritative account of recent developments around the world in the major methods used to characterize porous solids. The book is a useful work of reference for anyone interested in characterizing porous solids, such as MCM-41 mesoporous materials, pillared clays, etc. Papers on pore structure determination using gas adsorption feature strongly, together with papers on small angle scattering methods, mercury porosimetry, microcalorimetry, scanning probe microscopies, and image analysis.
Download or read book Catalysis in Confined Frameworks written by Hermenegildo Garcia and published by John Wiley & Sons. This book was released on 2023-10-12 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysis in Confined Frameworks Understanding the synthesis and applications of porous solid catalysts Heterogeneous catalysis is a catalytic process in which catalysts and reactants exist in different phases. Heterogeneous catalysis with solid catalysts proceeds through the absorption of substrates and reagents which are liquid or gas, and this is largely dependent on the accessible surface area of the solid which can generate active reaction sites. The synthesis of porous solids is an increasingly productive approach to generating solid catalysts with larger accessible surface area, allowing more efficient catalysis. Catalysis in Confined Frameworks: Synthesis, Characterization, and Applications provides a comprehensive overview of synthesis and use of porous solids as heterogeneous catalysts. It provides detailed analysis of pore engineering, a thorough characterization of the advantages and disadvantages of porous solids as heterogeneous catalysts, and an extensive discussion of applications. The result is a foundational introduction to a cutting-edge field. Catalysis in Confined Frameworks: Synthesis, Characterization, and Applications readers will also find: An editorial team comprised of international experts with extensive experience Detailed discussion of catalyst classes including zeolites, mesoporous aluminosilicates, and more A special focus on size selective catalysis Catalysis in Confined Frameworks: Synthesis, Characterization, and Applications is an essential reference for catalytic chemists, organic chemists, materials scientists, physical chemists, and any researchers or industry professionals working with heterogeneous catalysis.
Download or read book Nanoporous Materials III written by M. Jaroniec and published by Elsevier. This book was released on 2002-05-15 with total page 711 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoporous Materials III contains the invited lectures and peer-reviewed oral and poster contributions to be presented at the 3rd Conference on Nanoporous Materials, which will be hosted in Ottawa, Canada, June 2002. The work covers complementary approaches to and recent advances in the field of nanostructured materials with pore sizes larger than 1nm, such as periodic mesoporous molecular sieves M41S and FSM16 and related materials including clays, carbon molecular sieves, colloidal crystal templated organic and inorganic materials, porous polymers and sol gels. The broad range of topics covered in relation to the synthesis and characterization of ordered mesoporous materials are of great importance for advanced adsorption, catalytic and separation processes as well as the development of nanotechnology. The contents of this title are based on topics to be discussed by invited lecturers, which deal with periodic mesoporous organosilicas, stability and catalytic activity of aluminosilicate mesostructures, electron microscopy studies of ordered materials, imprinted polymers and highly porous metal-organic frameworks. The other contributions deal with tailoring the surface and structural properties of nanoporous materials, giving a detailed characterization as well as demonstrating their usefulness for advanced adsorption and catalytic applications.
