Download or read book Characterization and Development of Novel Materials Research Compendium written by Rafiq Islam and published by Nova Science Pub Incorporated. This book was released on 2012-09-01 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles articles from the Journal of Characterization and Development of Novel Materials. Topics discussed include the perspectives of polymer nanocomposites applications as engineering materials; polymeric nanocomposites based on the organomodified layered silicates; structural analysis of nanocomposites polymer/organoclay microhardness and kinetics and mechanism of emulsion copolymerization of methyl acrylate with hydrophilic monomers.
Download or read book Materials Characterization Using Nondestructive Evaluation NDE Methods written by Gerhard Huebschen and published by Woodhead Publishing. This book was released on 2016-03-23 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Characterization Using Nondestructive Evaluation (NDE) Methods discusses NDT methods and how they are highly desirable for both long-term monitoring and short-term assessment of materials, providing crucial early warning that the fatigue life of a material has elapsed, thus helping to prevent service failures. Materials Characterization Using Nondestructive Evaluation (NDE) Methods gives an overview of established and new NDT techniques for the characterization of materials, with a focus on materials used in the automotive, aerospace, power plants, and infrastructure construction industries. Each chapter focuses on a different NDT technique and indicates the potential of the method by selected examples of applications. Methods covered include scanning and transmission electron microscopy, X-ray microtomography and diffraction, ultrasonic, electromagnetic, microwave, and hybrid techniques. The authors review both the determination of microstructure properties, including phase content and grain size, and the determination of mechanical properties, such as hardness, toughness, yield strength, texture, and residual stress. Gives an overview of established and new NDT techniques, including scanning and transmission electron microscopy, X-ray microtomography and diffraction, ultrasonic, electromagnetic, microwave, and hybrid techniques Reviews the determination of microstructural and mechanical properties Focuses on materials used in the automotive, aerospace, power plants, and infrastructure construction industries Serves as a highly desirable resource for both long-term monitoring and short-term assessment of materials
Download or read book Materials Characterization written by Yang Leng and published by John Wiley & Sons. This book was released on 2009-03-04 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers state-of-the-art techniques commonly used in modern materials characterization. Two important aspects of characterization, materials structures and chemical analysis, are included. Widely used techniques, such as metallography (light microscopy), X-ray diffraction, transmission and scanning electron microscopy, are described. In addition, the book introduces advanced techniques, including scanning probe microscopy. The second half of the book accordingly presents techniques such as X-ray energy dispersive spectroscopy (commonly equipped in the scanning electron microscope), fluorescence X-ray spectroscopy, and popular surface analysis techniques (XPS and SIMS). Finally, vibrational spectroscopy (FTIR and Raman) and thermal analysis are also covered.
Download or read book Characterization of Biomaterials written by Susmita Bose and published by Elsevier Inc. Chapters. This book was released on 2013-03-12 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: This brief introductory chapter provides a broad overview of materials, biomaterials and the need to understand different techniques to characterize biomaterials. From this chapter, the reader can gain a perspective on how the rest of the topics in different chapters are divided to fully comprehend this inherently multidisciplinary field. Application of appropriate characterization tools can not only save time to fully evaluate different biomaterials, it can also make commercial biomedical devices safer. In the long run, safer biomedical devices can only reduce the pain and suffering of mankind, a dream that resonates with every biomedical researcher.
Download or read book Synthesis and Characterization of Advanced Materials written by Michael A. Serio and published by . This book was released on 1998 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: These papers by leading experts look at current methods for synthesizing new materials. The methods presented include chemical vapor deposition synthesis, solution synthesis, pyrolysis and combustion synthesis, and polymer synthesis. Featuring in-depth coverage of ceramic materials, the volume also discusses group III nitrides, fullerenes, and ferroelectrics.
Download or read book Beyond the Molecular Frontier written by National Research Council and published by National Academies Press. This book was released on 2003-03-19 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry and chemical engineering have changed significantly in the last decade. They have broadened their scopeâ€"into biology, nanotechnology, materials science, computation, and advanced methods of process systems engineering and controlâ€"so much that the programs in most chemistry and chemical engineering departments now barely resemble the classical notion of chemistry. Beyond the Molecular Frontier brings together research, discovery, and invention across the entire spectrum of the chemical sciencesâ€"from fundamental, molecular-level chemistry to large-scale chemical processing technology. This reflects the way the field has evolved, the synergy at universities between research and education in chemistry and chemical engineering, and the way chemists and chemical engineers work together in industry. The astonishing developments in science and engineering during the 20th century have made it possible to dream of new goals that might previously have been considered unthinkable. This book identifies the key opportunities and challenges for the chemical sciences, from basic research to societal needs and from terrorism defense to environmental protection, and it looks at the ways in which chemists and chemical engineers can work together to contribute to an improved future.
Download or read book Characterization of Minerals Metals and Materials 2022 written by Mingming Zhang and published by Springer Nature. This book was released on 2022-02-03 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: The collection focuses on the advancements of characterization of minerals, metals, and materials and the applications of characterization results on the processing of these materials. Advanced characterization methods, techniques, and new instruments are emphasized. Areas of interest include, but are not limited to: • Novel methods and techniques for characterizing materials across a spectrum of systems and processes. • Characterization of mechanical, thermal, electrical, optical, dielectric, magnetic, physical, and other properties of materials. • Characterization of structural, morphological, and topographical natures of materials at micro- and nano- scales. • Characterization of extraction and processing including process development and analysis. • Advances in instrument developments for microstructure analysis and performance evaluation of materials, such as computer tomography (CT), X-ray and neutron diffraction, electron microscopy (SEM, FIB, TEM), and spectroscopy (EDS, WDS, EBSD) techniques. • 2D and 3D modelling for materials characterization.
Download or read book Materials Science and Engineering for the 1990s written by National Research Council and published by National Academies Press. This book was released on 1989-02-01 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials science and engineering (MSE) contributes to our everyday lives by making possible technologies ranging from the automobiles we drive to the lasers our physicians use. Materials Science and Engineering for the 1990s charts the impact of MSE on the private and public sectors and identifies the research that must be conducted to help America remain competitive in the world arena. The authors discuss what current and future resources would be needed to conduct this research, as well as the role that industry, the federal government, and universities should play in this endeavor.
Download or read book Advances and Avenues in the Development of Novel Carriers for Bioactives and Biological Agents written by Manju Rawat Singh and published by Academic Press. This book was released on 2020-04-07 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances and Avenues in the Development of Novel Carriers for Bioactives and Biological Agents provides sound data on the utility of biological and plant-based drugs and describes challenges faced in all aspects offering indispensable strategies to use in the development of bioactive medicines. Bioactive based medications are commonly used throughout the world and have been recognized by physicians and patients for their therapeutic efficacy. Bioactive formulations, including their subordinates and analogs, address 50% of all medicines in clinical practice. Novel bioactive medicine transporters can cure many disorders by both spatial and transitory approaches and have various justifications in medicinal potential. This book presents information on the utility of natural, plant, animal and bioengineered bioactive materials. It is a fundamental source of information and data for pharmacognosists, pharmaceutical analysts, drug transport scientists and pharmacologists working in bioactive medications. Advances information on various bioactive based medications, their sources, clinical consequences and transport strategies Illustrates diverse transport systems for bioactives and derivatives, novel techniques for formulations, targeting strategies and fundamental qualities of developed bioactive carriers, and their safety concerns and standardization Discusses distinctive transport systems, stability, upgraded dissolvability, and enhanced bioavailability of bioactives
Download or read book Functional Properties of Nanostructured Materials written by Rainer Kassing and published by Springer Science & Business Media. This book was released on 2007-09-26 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, based on the lectures and contributions of the NATO ASI on "Functional Properties of Nanostructured Materials", gives a broad overview on its topic, as it combines basic theoretical articles, papers dealing with experimental techniques, and contributions on advanced and up-to-date applications in fields such as microelectronics, optoelectronics, electrochemistry, sensorics, and biotechnology.
Download or read book Economically and Environmentally Sustainable Enhanced Oil Recovery written by M. R. Islam and published by John Wiley & Sons. This book was released on 2020-03-17 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: There have been many books on the topic of Enhanced Oil Recovery (EOR) over the last 100 years. They all, however, focus on how to recover more oil faster, taking a rather myopic approach. The solutions presented all work fantastically in theory and even in the laboratory, but each fails to produce results in the field with long-term success. The petroleum industry is almost resigned to the belief that for an EOR technique to be successful, it must be propped up with public funds or must compromise environmental integrity. In line with modern engineering practices, previous books discuss how existing technologies can be tweaked to accommodate for any shortcomings that just came to light. This book is unlike any other book on the topic of recovery in particular and engineering in general. This groundbreaking volume is a continuation of the author’s and his research group’s work that started publishing on the subject of global sustainability involving energy and the environment, dating back to early 2000s. Starting with a paradigm shift in engineering that involves a long-term focus, rather than looking for short-term solutions, the methods and theories presented here delve into applying green engineering and zero waste principles to EOR. Historically, EOR has received mixed success, mainly because innovations in these disciplines relied heavily on processed materials, which are both uneconomical and toxic to the environment. This book explains how engineers missed entirely the causes of unsustainability in these technologies due to the prevalence of many myths that are embedded in modern engineering. Once these myths are deconstructed, the appropriate technologies emerge and the merits of them both in terms of economic and environmental benefits become clear. The book reveals how previous practices in EOR can be replaced with their sustainable versions while saving in material costs. A number of innovative technologies are introduced that can render well known technologies, such as steam flood, in situ combustion, chemical flooding, and microbial EOR environmentally sustainable and economically attractive. A triple dividend is received once these technologies are applied in otherwise marginal reservoirs, unconventional plays and even abandoned formations. The overall reserve, which reflects recoverable oil with new technologies, goes up drastically. Further benefits are drawn when processes such as value addition of waste material is performed. Overall this book shows how EOR can be rendered green while increasing the profitability. This is in stark contrast to the past practices that considered environmental integrity as a drain on profitability. This book proves that a paradigm shift can turn a “technological disaster” into a technological marvel.
Download or read book Polymer Colloids written by Rodney Priestley and published by Royal Society of Chemistry. This book was released on 2019-12-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Academic and industrial research around polymer-based colloids is huge, driven both by the development of mature technologies, e.g. latexes for coatings, as well as the advancement of new materials and applications, such as building blocks for 2D/3D structures and medicine. Edited by two world-renowned leaders in polymer science and engineering, this is a fundamental text for the field. Based on a specialised course by the editors, this book provides the reader with an invaluable single source of reference. The first section describes formation, explaining basic properties of emulsions and dispersion polymerization, microfluidic approaches to produce polymer-based colloids and formation via directed self-assembly. The next section details characterisation methodologies from microscopy and small angle scattering, to surface science and simulations. The final chapters close with applications, including Pickering emulsions and molecular engineering for materials development. A comprehensive guide to polymer colloids, with contributions by leaders in their respective areas, this book is a must-have for researchers and practitioners working across polymers, soft matter and chemical and molecular engineering.
Download or read book Development and Characterization of Novel Stimuli responsive Materials for Gene Delivery written by Daniele Pezzoli and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Greening of Pharmaceutical Engineering Practice Analysis and Methodology written by M. R. Islam and published by John Wiley & Sons. This book was released on 2015-12-03 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: The pharmaceutical industry is one of the most important industries in the world, offering new medicines, vaccines, and cures to a global population. It is a massive industry, worthy of a deep and thorough examination of its processes and chemistry, with a view toward sustainability. The authors describe what is and isn't truly sustainable, offering a new approach and a new definition of the sustainability of pharmaceutical and chemical engineering and the science behind it. This is a cutting-edge work, aimed at engineers, scientists, researchers, chemists, and students.
Download or read book Spectroscopy and Characterization of Nanomaterials and Novel Materials written by Prabhakar Misra and published by John Wiley & Sons. This book was released on 2022-03-28 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectroscopy and Characterization of Nanomaterials and Novel Materials Comprehensive overview of nanomaterial characterization methods and applications from leading researchers in the field In Spectroscopy and Characterization of Nanomaterials and Novel Materials: Experiments, Modeling, Simulations, and Applications, the editor Prabhakar Misra and a team of renowned contributors deliver a practical and up-to-date exploration of the characterization and applications of nanomaterials and other novel materials, including quantum materials and metal clusters. The contributions cover spectroscopic characterization methods for obtaining accurate information on optical, electronic, magnetic, and transport properties of nanomaterials. The book reviews nanomaterial characterization methods with proven relevance to academic and industry research and development teams, and modern methods for the computation of nanomaterials’ structure and properties - including machine-learning approaches - are also explored. Readers will also find descriptions of nanomaterial applications in energy research, optoelectronics, and space science, as well as: A thorough introduction to spectroscopy and characterization of graphitic nanomaterials and metal oxides Comprehensive explorations of simulations of gas separation by adsorption and recent advances in Weyl semimetals and axion insulators Practical discussions of the chemical functionalization of carbon nanotubes and applications to sensors In-depth examinations of micro-Raman imaging of planetary analogs Perfect for physicists, materials scientists, analytical chemists, organic and polymer chemists, and electrical engineers, Spectroscopy and Characterization of Nanomaterials and Novel Materials: Experiments, Modeling, Simulations, and Applications will also earn a place in the libraries of sensor developers and computational physicists and modelers.
Download or read book Characterization Techniques for Perovskite Solar Cell Materials written by Meysam Pazoki and published by Elsevier. This book was released on 2019-11-14 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterization Techniques for Perovskite Solar Cell Materials: Characterization of Recently Emerged Perovskite Solar Cell Materials to Provide an Understanding of the Fundamental Physics on the Nano Scale and Optimize the Operation of the Device Towards Stable and Low-Cost Photovoltaic Technology explores the characterization of nanocrystals of the perovskite film, related interfaces, and the overall impacts of these properties on device efficiency. Included is a collection of both main and research techniques for perovskite solar cells. For the first time, readers will have a complete reference of different characterization techniques, all housed in a work written by highly experienced experts. Explores various characterization techniques for perovskite solar cells and discusses both their strengths and weaknesses Discusses material synthesis and device fabrication of perovskite solar cells Includes a comparison throughout the work on how to distinguish one perovskite solar cell from another
Download or read book Novel Materials for Carbon Dioxide Mitigation Technology written by Bryan Morreale and published by Elsevier. This book was released on 2015-06-01 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Carbon Dioxide Mitigation Technology offers expert insight and experience from recognized authorities in advanced material development in carbon mitigation technology and constitutes a comprehensive guide to the selection and design of a wide range of solvent/sorbent/catalyst used by scientists globally. It appeals to chemical scientists, material scientists and engineers, energy researchers, and environmental scientists from academia, industry, and government in their research directed toward greener, more efficient carbon mitigation processes. Emphasizes material development for carbon mitigation technologies rather than regulations Provides a fundamental understanding of the underpinning science as well as technological approaches to implement carbon capture, utilization and storage technologies Introduces the driving force behind novel materials, their performance and applications for carbon dioxide mitigation Contains figures, tables and an abundance of examples clearly explaining the development, characterization and evaluation of novel carbon mitigation materials Includes hundreds of citations drawing on the most recent published works on the subject Provides a wealth of real-world examples, illustrating how to bridge nano-scale materials to bulk carbon mitigation properties