Download or read book Characteristic Analysis of Power Electronics and Its Applications written by Joni Welman Simatupang and published by Deepublish. This book was released on 2024-04-11 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characteristic Analysis of Power Electronics and Its Applications was created by Ir. Joni Welman Simatupang, S.T., M.Sc.Eng., Ph.D. This Characteristic Analysis of Power Electronics and Its Applications book discusses boost converter to boost low voltage battery ini electrical vehicle implementation, buck converter as step-down DC/DC converter for valve- acid battery charging system using photovoltaic array, usage of transistor as switch for water level indicator, as well as characterictics analysis of Silicon Controlled Rectifier (SCR) in adjusting light dimmer & light detector sensor. We hope that this book can serve as a helpful guidance and reference for readers in general to enrich their insight on the field. Spesification of this book: Category : Engineering Author : Ir. Joni Welman Simatupang, S.T., M.Sc.Eng., Ph.D E-ISBN : 978-623-124-333-1 Size : 15.5x23 cm Page : xvi, 91 hlm Publish Date : 2024 Deepublish publishers are book publishers that focus on publishing in the field of education, especially higher education (universities and high schools).

Download or read book Power Electronics and Motor Drive Systems written by Stefanos Manias and published by Academic Press. This book was released on 2016-11-08 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics and Motor Drive Systems is designed to aid electrical engineers, researchers, and students to analyze and address common problems in state-of-the-art power electronics technologies. Author Stefanos Manias supplies a detailed discussion of the theory of power electronics circuits and electronic power conversion technology systems, with common problems and methods of analysis to critically evaluate results. These theories are reinforced by simulation examples using well-known and widely available software programs, including SPICE, PSIM, and MATLAB/SIMULINK. Manias expertly analyzes power electronic circuits with basic power semiconductor devices, as well as the new power electronic converters. He also clearly and comprehensively provides an analysis of modulation and output voltage, current control techniques, passive and active filtering, and the characteristics and gating circuits of different power semiconductor switches, such as BJTs, IGBTs, MOSFETs, IGCTs, MCTs and GTOs. - Includes step-by-step analysis of power electronic systems - Reinforced by simulation examples using SPICE, PSIM, and MATLAB/SIMULINK - Provides 110 common problems and solutions in power electronics technologies

Download or read book Digital Power Electronics and Applications written by Fang Lin Luo and published by Elsevier. This book was released on 2010-07-20 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to describe the theory of Digital Power Electronics and its applications. The authors apply digital control theory to power electronics in a manner thoroughly different from the traditional, analog control scheme. In order to apply digital control theory to power electronics, the authors define a number of new parameters, including the energy factor, pumping energy, stored energy, time constant, and damping time constant. These parameters differ from traditional parameters such as the power factor, power transfer efficiency, ripple factor, and total harmonic distortion. These new parameters result in the definition of new mathematical modeling: • A zero-order-hold (ZOH) is used to simulate all AC/DC rectifiers. • A first-order-hold (FOH) is used to simulate all DC/AC inverters. • A second-order-hold (SOH) is used to simulate all DC/DC converters. • A first-order-hold (FOH) is used to simulate all AC/AC (AC/DC/AC) converters. Presents most up-to-date methods of analysis and control algorithms for developing power electronic converters and power switching circuits Provides an invaluable reference for engineers designing power converters, commercial power supplies, control systems for motor drives, active filters, etc. Presents methods of analysis not available in other books

Download or read book Industrial Applications of Power Electronics written by Eduardo M. G. Rodrigues and published by MDPI. This book was released on 2020-12-01 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, power electronics have been intensely contributing to the development and evolution of new structures for the processing of energy. They can be used in a wide range of applications ranging from power systems and electrical machines to electric vehicles and robot arm drives. In conjunction with the evolution of microprocessors and advanced control theories, power electronics are playing an increasingly essential role in our society. Thus, in order to cope with the obstacles lying ahead, this book presents a collection of original studies and modeling methods which were developed and published in the field of electrical energy conditioning and control by using circuits and electronic devices, with an emphasis on power applications and industrial control. Researchers have contributed 19 selected and peer-reviewed papers covering a wide range of topics by addressing a wide variety of themes, such as motor drives, AC–DC and DC–DC converters, multilevel converters, varistors, and electromagnetic compatibility, among others. The overall result is a book that represents a cohesive collection of inter-/multidisciplinary works regarding the industrial applications of power electronics.

Download or read book Thermal Analysis of Power Electronic Devices Used in Renewable Energy Systems written by Alhussein Albarbar and published by Springer. This book was released on 2017-07-19 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book analyzes the thermal characteristics of power electronic devices (PEDs) with a focus on those used in wind and solar energy systems. The authors focus on the devices used in such applications, for example boost converters and inverters under different operating conditions. The book explains in detail finite element modeling techniques, setting up measuring systems, data analysis, and PEDs’ lifetime calculations. It is appropriate reading for graduate students and researchers who focus on the design and reliability of power electronic devices.

Download or read book Power Electronics for Renewable Energy Systems Transportation and Industrial Applications written by Haitham Abu-Rub and published by John Wiley & Sons. This book was released on 2014-06-02 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compiles current research into the analysis and design of power electronic converters for industrial applications and renewable energy systems, presenting modern and future applications of power electronics systems in the field of electrical vehicles With emphasis on the importance and long-term viability of Power Electronics for Renewable Energy this book brings together the state of the art knowledge and cutting-edge techniques in various stages of research. The topics included are not currently available for practicing professionals and aim to enable the reader to directly apply the knowledge gained to their designs. The book addresses the practical issues of current and future electric and plug-in hybrid electric vehicles (PHEVs), and focuses primarily on power electronics and motor drives based solutions for electric vehicle (EV) technologies. Propulsion system requirements and motor sizing for EVs is discussed, along with practical system sizing examples. Key EV battery technologies are explained as well as corresponding battery management issues. PHEV power system architectures and advanced power electronics intensive charging infrastructures for EVs and PHEVs are detailed. EV/PHEV interface with renewable energy is described, with practical examples. This book explores new topics for further research needed world-wide, and defines existing challenges, concerns, and selected problems that comply with international trends, standards, and programs for electric power conversion, distribution, and sustainable energy development. It will lead to the advancement of the current state-of-the art applications of power electronics for renewable energy, transportation, and industrial applications and will help add experience in the various industries and academia about the energy conversion technology and distributed energy sources. Combines state of the art global expertise to present the latest research on power electronics and its application in transportation, renewable energy and different industrial applications Offers an overview of existing technology and future trends, with discussion and analysis of different types of converters and control techniques (power converters, high performance power devices, power system, high performance control system and novel applications) Systematic explanation to provide researchers with enough background and understanding to go deeper in the topics covered in the book

Download or read book Modeling and Control of Power Electronics Converter System for Power Quality Improvements written by Sanjeet Kumar Dwivedi and published by Academic Press. This book was released on 2018-08-17 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and Control of Power Electronics Converter Systems for Power Quality Improvements provides grounded theory for the modeling, analysis and control of different converter topologies that improve the power quality of mains. Intended for researchers and practitioners working in the field, topics include modeling equations and the state of research to improve power quality converters. By presenting control methods for different converter topologies and aspects related to multi-level inverters and specific analysis related to the AC interface of drives, the book helps users by putting a particular emphasis on different control algorithms that enhance knowledge and research work. Present In-depth coverage of modeling and control methods for different converter topology Includes a particular emphasis on different control algorithms to give readers an easier understanding Provides a results and discussion chapter and MATLAB simulation to support worked examples and real-life application scenarios

Download or read book The Switching Function written by C.C. Marouchos and published by IET. This book was released on 2006 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This new book demonstrates the usefulness of the switching function in analyzing power electronic circuits in the steady state. A procedure is suggested for the effective application of this method for the analysis of all types of power electronic circuits."--BOOK JACKET.

Download or read book Power Electronics Handbook written by Muhammad H. Rashid and published by Elsevier. This book was released on 2010-07-19 with total page 1189 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power electronics, which is a rapidly growing area in terms of research and applications, uses modern electronics technology to convert electric power from one form to another, such as ac-dc, dc-dc, dc-ac, and ac-ac with a variable output magnitude and frequency. Power electronics has many applications in our every day life such as air-conditioners, electric cars, sub-way trains, motor drives, renewable energy sources and power supplies for computers. This book covers all aspects of switching devices, converter circuit topologies, control techniques, analytical methods and some examples of their applications.* 25% new content* Reorganized and revised into 8 sections comprising 43 chapters* Coverage of numerous applications, including uninterruptable power supplies and automotive electrical systems* New content in power generation and distribution, including solar power, fuel cells, wind turbines, and flexible transmission

Download or read book Applications of Power Electronics written by Frede Blaabjerg and published by MDPI. This book was released on 2019-06-24 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power electronics technology is still an emerging technology, and it has found its way into many applications, from renewable energy generation (i.e., wind power and solar power) to electrical vehicles (EVs), biomedical devices, and small appliances, such as laptop chargers. In the near future, electrical energy will be provided and handled by power electronics and consumed through power electronics; this not only will intensify the role of power electronics technology in power conversion processes, but also implies that power systems are undergoing a paradigm shift, from centralized distribution to distributed generation. Today, more than 1000 GW of renewable energy generation sources (photovoltaic (PV) and wind) have been installed, all of which are handled by power electronics technology. The main aim of this book is to highlight and address recent breakthroughs in the range of emerging applications in power electronics and in harmonic and electromagnetic interference (EMI) issues at device and system levels as discussed in ‎robust and reliable power electronics technologies, including fault prognosis and diagnosis technique stability of grid-connected converters and ‎smart control of power electronics in devices, microgrids, and at system levels.

Download or read book Power Electronics written by Ned Mohan and published by . This book was released on 1994 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Power Electronics written by D. Fewson and published by Butterworth-Heinemann. This book was released on 1998-03-27 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on solid state device and electromagnetic contributions to the series, this text book introduces modern power electronics, that is the application of semiconductor devices to the control and conversion of electrical power. The increased availability of solid state power switches has created a very rapid expansion in applications, from the relatively low power control of domestic equipment, to high power control of industrial processes and very high power control along transmission lines. This text provides a comprehensive introduction to the entire range of devices and examines their applications, assuming only the minimum mathematical and electronic background. It covers a full year's course in power electronics. Numerous exercises, worked examples and self assessments are included to facilitate self study and distance learning.

Download or read book Power Electronics Circuits Devices and Application for Anna University written by Muhammad H. Rashid and published by Pearson Education India. This book was released on 2011 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Power Electronic Packaging written by Yong Liu and published by Springer Science & Business Media. This book was released on 2012-02-15 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronic Packaging presents an in-depth overview of power electronic packaging design, assembly,reliability and modeling. Since there is a drastic difference between IC fabrication and power electronic packaging, the book systematically introduces typical power electronic packaging design, assembly, reliability and failure analysis and material selection so readers can clearly understand each task's unique characteristics. Power electronic packaging is one of the fastest growing segments in the power electronic industry, due to the rapid growth of power integrated circuit (IC) fabrication, especially for applications like portable, consumer, home, computing and automotive electronics. This book also covers how advances in both semiconductor content and power advanced package design have helped cause advances in power device capability in recent years. The author extrapolates the most recent trends in the book's areas of focus to highlight where further improvement in materials and techniques can drive continued advancements, particularly in thermal management, usability, efficiency, reliability and overall cost of power semiconductor solutions.

Download or read book Reliability of Power Electronic Converter Systems written by Henry Shu-hung Chung and published by IET. This book was released on 2015-12-07 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main aims of power electronic converter systems (PECS) are to control, convert, and condition electrical power flow from one form to another through the use of solid state electronics. This book outlines current research into the scientific modeling, experimentation, and remedial measures for advancing the reliability, availability, system robustness, and maintainability of PECS at different levels of complexity.

Download or read book Handbook of Power Systems Engineering with Power Electronics Applications written by Yoshihide Hase and published by John Wiley & Sons. This book was released on 2012-11-20 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: Formerly known as Handbook of Power System Engineering, this second edition provides rigorous revisions to the original treatment of systems analysis together with a substantial new four-chapter section on power electronics applications. Encompassing a whole range of equipment, phenomena, and analytical approaches, this handbook offers a complete overview of power systems and their power electronics applications, and presents a thorough examination of the fundamental principles, combining theories and technologies that are usually treated in separate specialised fields, in a single unified hierarchy. Key features of this new edition: Updates throughout the entire book with new material covering applications to current topics such as brushless generators, speed adjustable pumped storage hydro generation, wind generation, small-hydro generation, solar generation, DC-transmission, SVC, SVG (STATCOM), FACTS, active-filters, UPS and advanced railway traffic applications Theories of electrical phenomena ranging from DC and power frequency to lightning-/switching-surges, and insulation coordination now with reference to IEC Standards 2010 New chapters presenting advanced theories and technologies of power electronics circuits and their control theories in combination with various characteristics of power systems as well as induction-generator/motor driving systems Practical engineering technologies of generating plants, transmission lines, sub-stations, load systems and their combined network that includes schemes of high voltage primary circuits, power system control and protection A comprehensive reference for those wishing to gain knowledge in every aspect of power system engineering, this book is suited to practising engineers in power electricity-related industries and graduate level power engineering students.

Download or read book Power Electronics Step by Step Design Modeling Simulation and Control written by Weidong Xiao and published by McGraw Hill Professional. This book was released on 2021-02-05 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the latest power electronics principles, practices, and applications This electrical engineering guide offers comprehensive coverage of design, modeling, simulation, and control for power electronics. The book describes real-world applications for the technology and features case studies worked out in both MATLAB and Simulink. Presented in an accessible style, Power Electronics Step-by-Step: Design, Modeling, Simulation, and Control focuses on the latest technologies, such as DC-based systems, and emphasizes the averaging technique for both simulation and modeling. You will get photos, diagrams, flowcharts, graphs, equations, and tables that illustrate each topic. Circuit components Non-isolated DC/DC conversion Power analysis DC to single-phase AC conversion Single-phase AC to DC conversion Galvanic isolated DC/DC conversion Power conversion for three-phase AC Bidirectional power conversion Averaging model for simulation Dynamic modeling of DC/DC converters Regulation of voltage and current