Download or read book Characterisation of the Mechanical Properties of Heat Induced Protein Deposits in Immersed Cleaning Systems written by Jintian Liu and published by Springer Nature. This book was released on 2023-01-02 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: During heat treatment in dairy production, the rapid formation of heat-induced fouling deposits on the plant surface leads to reduced efficiency of heat transfer. Therefore, a regular cleaning process is required to soften the heat-induced protein deposits and then remove them from the plant surface. The mechanical property of the deposits is one of the key issues of the cleaning mechanisms since the non-fractured behaviour dominates the deformation of the fouling layer and the failure behaviour has a great impact on the cohesive removal of fouling deposits. Considering the complicated geometry of fouling deposits and their irregular distribution, indentation experiments were carried out on various kinds of protein deposits. The experimental results reveal the significant influence of the thickness of fouling deposits on their mechanical behaviour and the time-dependent nonlinear behaviour of the deposits. Furthermore, heat-induced whey protein gel was used as the model material for fouling deposits and the non-fractured and fracture behaviour was characterized using compression and wire cutting experiments, respectively. The material parameters identified using the inverse finite element method allow the prediction of fracture behaviour under localized external loads and provide a deeper insight into cohesive removal. To investigate the softening effect during caustic washing, tensile experiments were conducted on chemically treated and untreated whey protein gels. Adequate chemical degradation leads to a softer mechanical response and increased stress relaxation, making whey protein gels more flowable and more resistant to tensile deformation. The experimental results provide useful data on the failure behaviour of chemically treated whey protein gels.
Download or read book CHARACTERISATION OF THE MECHANICAL PROPERTIES OF HEAT INDUCED PROTEIN DEPOSITS IN IMMERSED CLEANING SYSTEMS written by JINTIAN. LIU and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biomaterials in Orthopedics written by Michael J. Yaszemski and published by CRC Press. This book was released on 2003-10-17 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by respected experts in the field, Biomaterials in Orthopedics discusses bioabsorbable biomaterials for bone repair, nondegradable materials in orthopaedics and delivery systems. Topics in this text include biocompatibility and the biomaterial/tissue interface; self-reinforced bioabsorbable devices and guided regeneration; bone substitutes,
Download or read book Mechanical Behavior of Materials written by William F. Hosford and published by Cambridge University Press. This book was released on 2010 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a textbook on the mechanical behavior of materials for mechanical and materials engineering. It emphasizes quantitative problem solving. This new edition includes treatment of the effects of texture on properties and microstructure in Chapter 7, a new chapter (12) on discontinuous and inhomogeneous deformation, and treatment of foams in Chapter 21.
Download or read book Membrane Characterization written by Nidal Hilal and published by Elsevier. This book was released on 2017-02-18 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membrane Characterization provides a valuable source of information on how membranes are characterized, an extremely limited field that is confined to only brief descriptions in various technical papers available online. For the first time, readers will be able to understand the importance of membrane characterization, the techniques required, and the fundamental theory behind them. This book focuses on characterization techniques that are normally used for membranes prepared from polymeric, ceramic, and composite materials. - Features specific details on many membrane characterization techniques for various membrane materials of industrial and academic interest - Contains examples of international best practice techniques for the evaluation of several membrane parameters, including pore size, charge, and fouling - Discusses various membrane models more suitable to a specific application - Provides examples of ab initio calculations for the design, optimization, and scale-up of processes based on characterization data
Download or read book The Perfect Slime written by Hans-Curt Flemming and published by IWA Publishing. This book was released on 2016-09-15 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Perfect Slime presents the latest state of knowledge and all aspects of the Extracellular Polymeric Substances, (EPS) matrix – from the ecological and health to the antifouling perspectives. The book brings together all the current material in order to expand our understanding of the functions, properties and characteristics of the matrix as well as the possibilities to strengthen or weaken it. The EPS matrix represents the immediate environment in which biofilm organisms live. From their point of view, this matrix has paramount advantages. It allows them to stay together for extended periods and form synergistic microconsortia, it retains extracellular enzymes and turns the matrix into an external digestion system and it is a universal recycling yard, it protects them against desiccation, it allows for intense communication and represents a huge genetic archive. They can remodel their matrix, break free and eventually, they can use it as a nutrient source. The EPS matrix can be considered as one of the emergent properties of biofilms and are a major reason for the success of this form of life. Nevertheless, they have been termed the “black matter of biofilms” for good reasons. First of all: the isolation methods define the results. In most cases, only water soluble EPS components are investigated; insoluble ones such as cellulose or amyloids are much less included. In particular in environmental biofilms with many species, it is difficult to impossible isolate, separate the various EPS molecules they are encased in and to define which species produced which EPS. The regulation and the factors which trigger or inhibit EPS production are still very poorly understood. Furthermore: bacteria are not the only microorganisms to produce EPS. Archaea, Fungi and algae can also form EPS. This book investigates the questions, What is their composition, function, dynamics and regulation? What do they all have in common?
Download or read book Characterization of Biomaterials written by Mangal Roy and published by Elsevier Inc. Chapters. This book was released on 2013-03-12 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: In joint replacement surgery with suboptimal bone, allograft materials are often used to achieve biological fixation of the metallic implant to the host bone and reducing the implant fixation time. The most commonly used techniques are cemented and hydroxyapatite (HA)-coated metallic implants. Typically, HA coatings are suggested for patients with better bone stock, whereas recommended implant fixation process for most other osteoporotic patients is bone cements. In general, there is a long-standing need to improve the performance of hip and other devices for longer in vivo implant lifetime that can help in reducing the number of revision surgeries, as well as minimizing physical and mental trauma to the patient. To achieve these goals, it is important to understand the mechanical and biological properties of coatings that can influence not only its short- and long-term bioactivity but also life span in vivo. Over the years, it has been recognized that the stability of a coated implant is governed by its physical and mechanical properties. A coating that separates from the implant provides no advantage over an uncoated implant and undesirable due to problems with debris materials, which can lead to osteolysis. Therefore, it is important to properly characterize the coated implants in terms of its physical and mechanical properties. In this chapter, specific details on coating characterization techniques including sample dimensions, sample preparation, experimental procedure and data interpretation are discussed. In particular, the standards and requirements of regulatory organizations are presented elucidating the significance and use of each characterization. It is important to appreciate that mechanical properties of coatings can only be determined with certain coating specification such as coating thickness. This chapter is designed even for non-experts to follow mechanical property characterizations of coatings on medical implants.
Download or read book Bio inspired Polymers written by Nico Bruns and published by Royal Society of Chemistry. This book was released on 2016-10-14 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many key aspects of life are based on naturally occurring polymers, such as polysaccharides, proteins and DNA. Unsurprisingly, their molecular functionalities, macromolecular structures and material properties are providing inspiration for designing new polymeric materials with specific functions, for example, responsive, adaptive and self-healing materials. Bio-inspired Polymers covers all aspects of the subject, ranging from the synthesis of novel polymers, to structure-property relationships, materials with advanced properties and applications of bio-inspired polymers in such diverse fields as drug delivery, tissue engineering, optical materials and lightweight structural materials. Written and edited by leading experts on the topic, the book provides a comprehensive review and essential graduate level text on bio-inspired polymers for biochemists, materials scientists and chemists working in both industry and academia.
Download or read book Biochar for Environmental Management written by Dr. Johannes Lehmann and published by Earthscan. This book was released on 2009 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Biochar is the carbon-rich product when biomass (such as wood, manure, or crop residues) is heated in a closed container with little or no available air. It can be used to improve agriculture and the environment in several ways, and its stability in soil and superior nutrient-retention properties make it an ideal soil amendment to increase crop yields. In addition to this, biochar sequestration, in combination with sustainable biomass production, can be carbon-negative and therefore used to actively remove carbon dioxide from the atmosphere, with major implications for mitigation of climate change. Biochar production can also be combined with bioenergy production through the use of the gases that are given off in the pyrolysis process.This book is the first to synthesize the expanding research literature on this topic. The book's interdisciplinary approach, which covers engineering, environmental sciences, agricultural sciences, economics and policy, is a vital tool at this stage of biochar technology development. This comprehensive overview of current knowledge will be of interest to advanced students, researchers and professionals in a wide range of disciplines"--Provided by publisher.
Download or read book Current Awareness in Particle Technology written by and published by . This book was released on 1996 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Coatings written by Feng Shi and published by BoD – Books on Demand. This book was released on 2012-02-24 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main target of this book is to state the latest advancement in ceramic coatings technology in various industrial fields. The book includes topics related to the applications of ceramic coating covers in enginnering, including fabrication route (electrophoretic deposition and physical deposition) and applications in turbine parts, internal combustion engine, pigment, foundry, etc.
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2566 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrospun Nanofibers written by Mehdi Afshari and published by Woodhead Publishing. This book was released on 2016-09-13 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrospun Nanofibers covers advances in the electrospinning process including characterization, testing and modeling of electrospun nanofibers, and electrospinning for particular fiber types and applications. Electrospun Nanofibers offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science. Electrospinning is the most commercially successful process for the production of nanofibers and rising demand is driving research and development in this field. Rapid progress is being made both in terms of the electrospinning process and in the production of nanofibers with superior chemical and physical properties. Electrospinning is becoming more efficient and more specialized in order to produce particular fiber types such as bicomponent and composite fibers, patterned and 3D nanofibers, carbon nanofibers and nanotubes, and nanofibers derived from chitosan. - Provides systematic and comprehensive coverage of the manufacture, properties, and applications of nanofibers - Covers recent developments in nanofibers materials including electrospinning of bicomponent, chitosan, carbon, and conductive fibers - Brings together expertise from academia and industry to provide comprehensive, up-to-date information on nanofiber research and development - Offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science
Download or read book Metals Abstracts written by and published by . This book was released on 1989 with total page 1132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Poly lactic acid written by Rafael A. Auras and published by Wiley. This book was released on 2010-10-19 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the synthesis, properties, and processing methods of poly(lactic acid) (PLA), an important family of degradable plastics. As the need for environmentally-friendly packaging materials increases, consumers and companies are in search for new materials that are largely produced from renewable resources, and are recyclable. To that end, an overall theme of the book is the biodegradability, recycling, and sustainability benefits of PLA. The chapters, from a base of international expert contributors, describe specific processing methods, spectroscopy techniques for PLA analysis, and and applications in medical items, packaging, and environmental use.
Download or read book Bulletin of the Atomic Scientists written by and published by . This book was released on 1970-06 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Bulletin of the Atomic Scientists is the premier public resource on scientific and technological developments that impact global security. Founded by Manhattan Project Scientists, the Bulletin's iconic "Doomsday Clock" stimulates solutions for a safer world.
Download or read book Cement Production Technology written by Anjan Kumar Chatterjee and published by CRC Press. This book was released on 2018-04-27 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is an outcome of the author’s active professional involvement in research, manufacture and consultancy in the field of cement chemistry and process engineering. This multidisciplinary title on cement production technology covers the entire process spectrum of cement production, starting from extraction and winning of natural raw materials to the finished products including the environmental impacts and research trends. The book has an overtone of practice supported by the back-up principles.
