Download or read book Characterisation of Porous Solids V written by Gerhard Kreysa and published by Elsevier Science Limited. This book was released on 2000 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fifth International Symposium on the Characterisation of Porous Solids (COPS-V) was held at Heidelberg, Germany, from May 30 to June 2, 1999. About 220 participants from 25 countries enjoyed a very successful meeting with 32 lectures and 155 poster presentations. The Symposium started with a highly stimulating lecture by Sir John Meurig Thomas, Cambridge, highlighting the recent developments in engineering of new catalysts. The following two full sessions were devoted to theory, modelling and simulation which provide the basis for the interpretation of pore structural data of adsorbents and finely dispersed solids. Sessions 2 and 3 focused on the advances in the synthesis and characterisation of highly ordered inorganic adsorbents and carbons. Sessions 4 and 5 addressed important questions with respect to the characterisation of porous solids by sorption measurement and other related techniques. The intensive three-day programme provided a stimulating forum for the exchange of novel research findings, concepts, techniques and materials which are collected in this volume.
Download or read book Characterisation of Porous Solids VIII written by Stefan Kaskel and published by Royal Society of Chemistry. This book was released on 2009 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book is the Proceedings of the 8th International Symposium on the Characterisation of Porous Solids, known also as "COPS VIII". The conference is one of a series, held every three years, which covers developments in methods for the characterisation of porous materials, and applications of those methods. The scope of the conference: COPS VIII is concerned with fundamental and applied research on the characterisation of the structure of porous materials, and the relationship between structure and material performance. The scope includes experimental characterisation methods such as X-Ray diffraction, NMR, adsorption, mercury intrusion, and calorimetry; theoretical and simulation methods used to interpret experimental data, such as molecular simulation, classical and statistical mechanical theory, and pore network modelling; and applied research on the impact of measured material properties on performance in applications.
Download or read book Characterisation of Porous Solids V written by G. Kreysa and published by Elsevier. This book was released on 2000-04-11 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fifth International Symposium on the Characterisation of Porous Solids (COPS-V) was held at Heidelberg, Germany, from May 30 to June 2, 1999. About 220 participants from 25 countries enjoyed a very successful meeting with 32 lectures and 155 poster presentations. The Symposium started with a highly stimulating lecture by Sir John Meurig Thomas, Cambridge, highlighting the recent developments in engineering of new catalysts. The following two full sessions were devoted to theory, modelling and simulation which provide the basis for the interpretation of pore structural data of adsorbents and finely dispersed solids. Sessions 2 and 3 focused on the advances in the synthesis and characterisation of highly ordered inorganic adsorbents and carbons. Sessions 4 and 5 addressed important questions with respect to the characterisation of porous solids by sorption measurement and other related techniques. The intensive three-day programme provided a stimulating forum for the exchange of novel research findings, concepts, techniques and materials which are collected in this volume.
Download or read book Characterisation of Porous Solids V written by G. Kreysa and published by Elsevier Science. This book was released on 2000-04-25 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fifth International Symposium on the Characterisation of Porous Solids (COPS-V) was held at Heidelberg, Germany, from May 30 to June 2, 1999. About 220 participants from 25 countries enjoyed a very successful meeting with 32 lectures and 155 poster presentations. The Symposium started with a highly stimulating lecture by Sir John Meurig Thomas, Cambridge, highlighting the recent developments in engineering of new catalysts. The following two full sessions were devoted to theory, modelling and simulation which provide the basis for the interpretation of pore structural data of adsorbents and finely dispersed solids. Sessions 2 and 3 focused on the advances in the synthesis and characterisation of highly ordered inorganic adsorbents and carbons. Sessions 4 and 5 addressed important questions with respect to the characterisation of porous solids by sorption measurement and other related techniques. The intensive three-day programme provided a stimulating forum for the exchange of novel research findings, concepts, techniques and materials which are collected in this volume.
Download or read book Characterization of Porous Solids written by H. Kral and published by Elsevier. This book was released on 1988-04-01 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of porosity has long been recognized by scientists and engineers. Porous solids are widely encountered in industry and everyday life and their behaviour, e.g. chemical reactivity, adsorptive capacity, and catalytic activity is dependent on their pore structure. A considerable amount of work on porous solids has been undertaken both in academic and in industrial laboratories. However, all this activity is in urgent need of a critical appraisal. To undertake this task, a number of leading experts in the field of adsorption, porosimetry, X-ray and neutron scattering, optical and electron microscopy, calorimetry and fluid permeation, were brought together at the 1987 IUPAC (COPS I) Symposium.This proceedings volume provides an up-to-date overall review of the theoretical foundations for modelling and characterizing porous systems. It deals with most of the techniques in current use as applied to both model systems and porous solids of industrial importance. The reader will find the description and discussion of a number of novel techniques as well as a critical appraisal and comparison of the more established methods. All those concerned with the characterization of porous solids in academic and industrial laboratories will find much to interest them in this volume. It should be on the bookshelf of applied research centres involved in adsorption, catalysis, purification of gases and liquids, pigments, fillers, building materials, etc.
Download or read book Characterization of Porous Solids II written by KK Unger and published by Elsevier. This book was released on 1991-04-19 with total page 797 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second IUPAC Symposium on the Characterization of Porous Solids (COPS-II) provided the opportunity for detailed discussion and appraisal of the most important techniques currently used for the characterization of porous materials, especially those of technological importance. The 82 selected papers and reviews contained in this volume are mainly concerned with the theoretical and experimental aspects of adsorption, fluid penetration, small-angle scattering and spectroscopic methods with their application in the study of adsorbents, catalysts, constructional materials, etc. Particular attention is given to the characterization of carbons, oxides, zeolites, clays, cement and polymers. The wide range of materials and techniques described in this book provide a useful and comprehensive reference source for academic and industrial scientists and technologists.
Download or read book Characterization of Porous Solids written by and published by . This book was released on 1988 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization of Porous Solids VI written by and published by Elsevier. This book was released on 2002-11-14 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 99 of the papers that were presented at the 6th in the series of Symposia on Characterization of Porous Solids held in Alicante, Spain, May 2002. Written by leading international specialists in the subject, the contributions represent an up-to-date and authoritative account of recent developments around the world in the major methods used to characterize porous solids. The book is a useful work of reference for anyone interested in characterizing porous solids, such as MCM-41 mesoporous materials, pillared clays, etc. Papers on pore structure determination using gas adsorption feature strongly, together with papers on small angle scattering methods, mercury porosimetry, microcalorimetry, scanning probe microscopies, and image analysis.
Download or read book Characterization of Porous Solids written by and published by . This book was released on 1988 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization of Porous Solids and Powders Surface Area Pore Size and Density written by Seymour Lowell and published by Springer Science & Business Media. This book was released on 2006-04-24 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth of interest in newly developed porous materials has prompted the writing of this book for those who have the need to make meaningful measurements without the benefit of years of experience. One might consider this new book as the 4th edition of "Powder Surface Area and Porosity" (Lowell & Shields), but for this new edition we set out to incorporate recent developments in the understanding of fluids in many types of porous materials, not just powders. Based on this, we felt that it would be prudent to change the title to "Characterization of Porous Solids and Powders: Surface Area, Porosity and Density". This book gives a unique overview of principles associated with the characterization of solids with regard to their surface area, pore size, pore volume and density. It covers methods based on gas adsorption (both physi and chemisorption), mercury porosimetry and pycnometry. Not only are the theoretical and experimental basics of these techniques presented in detail but also, in light of the tremendous progress made in recent years in materials science and nanotechnology, the most recent developments are described. In particular, the application of classical theories and methods for pore size analysis are contrasted with the most advanced microscopic theories based on statistical mechanics (e.g. Density Functional Theory and Molecular Simulation). The characterization of heterogeneous catalysts is more prominent than in earlier editions; the sections on mercury porosimetry and particularly chemisorption have been updated and greatly expanded.
Download or read book Characterization of Porous Solids and Powders Surface Area Pore Size and Density written by S. Lowell and published by Springer Science & Business Media. This book was released on 2012-09-14 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth of interest in newly developed porous materials has prompted the writing of this book for those who have the need to make meaningful measurements without the benefit of years of experience. One might consider this new book as the 4th edition of "Powder Surface Area and Porosity" (Lowell & Shields), but for this new edition we set out to incorporate recent developments in the understanding of fluids in many types of porous materials, not just powders. Based on this, we felt that it would be prudent to change the title to "Characterization of Porous Solids and Powders: Surface Area, Porosity and Density". This book gives a unique overview of principles associated with the characterization of solids with regard to their surface area, pore size, pore volume and density. It covers methods based on gas adsorption (both physi and chemisorption), mercury porosimetry and pycnometry. Not only are the theoretical and experimental basics of these techniques presented in detail but also, in light of the tremendous progress made in recent years in materials science and nanotechnology, the most recent developments are described. In particular, the application of classical theories and methods for pore size analysis are contrasted with the most advanced microscopic theories based on statistical mechanics (e.g. Density Functional Theory and Molecular Simulation). The characterization of heterogeneous catalysts is more prominent than in earlier editions; the sections on mercury porosimetry and particularly chemisorption have been updated and greatly expanded.
Download or read book Characterisation of Porous Solids IV written by B. McEnaney and published by . This book was released on 1997 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterisation of Porous Solids IV provides an up-to-date survey on both theoretical and applied aspects of this important topic in one comprehensive volume. Covering international research, many areas of this multidisciplinary subject are covered in detail, including computer simulation methods applied to porous solids and aspects of model mesoporous solids such as MCM-41. As well as insights into state-of-the-art research, an indication of the likely directions of future developments is also given. While of specific interest to materials scientists, chemists and chemical engineers, Characterisation of Porous Solids IV will also have a wider appeal to scientists and engineers whose work, either directly or indirectly, involves the study or use of porous solids.
Download or read book Characterization of Porous Solids V Proceedings of the 5th International Symposium on the Characterization of Porous Solids COPS V Heidelberg Germany May 30 June 2 1999 written by and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterisation of Porous Solids written by Sidney John Gregg and published by . This book was released on 1979 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization of porous solids VII proceedings of the 7th International Symposium on the Characterization of Porous Solids COPS VII Aix en Provence France 26 28 May 2005 written by and published by . This book was released on 2007 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ordered Porous Solids written by Valentin Valtchev and published by Elsevier. This book was released on 2011-08-11 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt: The developments in the area of ordered nanoporous solids have moved beyond the traditional catalytic and separation uses and given rise to a wide variety of new applications in different branches of chemistry, physics, material science, etc. The activity in this area is due to the outstanding properties of nanoporous materials that have attracted the attention of researchers from different communities. However, recent achievements in a specific field often remain out of the focus of collaborating communities. This work summarizes the latest developments and prospects in the area of ordered porous solids, including synthetic layered materials (clays), microporous zeolite-type materials, ordered mesoporous solids, metal-organic-framework compounds (MOFs), carbon, etc. All aspects, from synthesis via comprehensive characterization to the advanced applications of ordered porous materials, are presented. The chapters are written by leading experts in their respective fields with an emphasis on recent progress and the state of the art. - Summarizes the latest developments in the field of ordered nanoporous solids - Presents state-of-the-art coverage of applications related to porous solids - Incorporates 28 contributions from experts across the disciplines
Download or read book Characterization of Porous Solids VII written by Philip Llewellyn and published by Elsevier. This book was released on 2006-08-07 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 7th International Symposium on the Characterization of Porous Solids (COPS-VII) was held in the Congress Centre in Aix-en-Provence between the 25th-28th May 2005. The symposium covered recent results of fundamental and applied research on the characterization of porous solids. Papers relating to characterization methods such as gas adsorption and liquid porosimetry, X-ray techniques and microscopic measurements as well as the corresponding molecular modelling methods were given. These characterization methods were shown to be applied to all types of porous solids such as clays, carbons, ordered mesoporous materials, porous glasses, oxides, zeolites and metal organic frameworks. * 36 oral presentations and 166 posters and around 230 guests from 27 countries. * A large part of this symposium was devoted to the use computational methods to characterise porous solids
