Download or read book Major Applications of Carbon Nanotube Field Effect Transistors CNTFET written by Raj, Balwinder and published by IGI Global. This book was released on 2019-12-06 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: With recent advancements in electronics, specifically nanoscale devices, new technologies are being implemented to improve the properties of automated systems. However, conventional materials are failing due to limited mobility, high leakage currents, and power dissipation. To mitigate these challenges, alternative resources are required to advance electronics further into the nanoscale domain. Carbon nanotube field-effect transistors are a potential solution yet lack the information and research to be properly utilized. Major Applications of Carbon Nanotube Field-Effect Transistors (CNTFET) is a collection of innovative research on the methods and applications of converting semiconductor devices from micron technology to nanotechnology. The book provides readers with an updated status on existing CNTs, CNTFETs, and their applications and examines practical applications to minimize short channel effects and power dissipation in nanoscale devices and circuits. While highlighting topics including interconnects, digital circuits, and single-wall CNTs, this book is ideally designed for electrical engineers, electronics engineers, students, researchers, academicians, industry professionals, and practitioners working in nanoscience, nanotechnology, applied physics, and electrical and electronics engineering.
Download or read book Carbon Nanotube Electronics written by Ali Javey and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a complete overview of the field of carbon nanotube electronics. It covers materials and physical properties, synthesis and fabrication processes, devices and circuits, modeling, and finally novel applications of nanotube-based electronics. The book introduces fundamental device physics and circuit concepts of 1-D electronics. At the same time it provides specific examples of the state-of-the-art nanotube devices.
Download or read book Design Simulation and Construction of Field Effect Transistors written by Dhanasekaran Vikraman and published by BoD – Books on Demand. This book was released on 2018-07-18 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, research on microelectronics has been specifically focused on the proposition of efficient alternative methodologies and materials to fabricate feasible integrated circuits. This book provides a general background of thin film transistors and their simulations and constructions. The contents of the book are broadly classified into two topics: design and simulation of FETs and construction of FETs. All the authors anticipate that the provided chapters will act as a single source of reference for the design, simulation and construction of FETs. This edited book will help microelectronics researchers with their endeavors and would be a great addition to the realm of semiconductor physics.
Download or read book Research Anthology on Synthesis Characterization and Applications of Nanomaterials written by Management Association, Information Resources and published by IGI Global. This book was released on 2021-03-19 with total page 1917 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of nanotechnologies continues to grow, as nanomaterials have proven their versatility and use in many different fields and industries within the scientific profession. Using nanotechnology, materials can be made lighter, more durable, more reactive, and more efficient leading nanoscale materials to enhance many everyday products and processes. With many different sizes, shapes, and internal structures, the applications are endless. These uses range from pharmaceutics to materials such as cement or cloth, electronics, environmental sustainability, and more. Therefore, there has been a recent surge of research focused on the synthesis and characterizations of these nanomaterials to better understand how they can be used, their applications, and the many different types. The Research Anthology on Synthesis, Characterization, and Applications of Nanomaterials seeks to address not only how nanomaterials are created, used, or characterized, but also to apply this knowledge to the multidimensional industries, fields, and applications of nanomaterials and nanoscience. This includes topics such as both natural and manmade nanomaterials; the size, shape, reactivity, and other essential characteristics of nanomaterials; challenges and potential effects of using nanomaterials; and the advantages of nanomaterials with multidisciplinary uses. This book is ideally designed for researchers, engineers, practitioners, industrialists, educators, strategists, policymakers, scientists, and students working in fields that include materials engineering, engineering science, nanotechnology, biotechnology, microbiology, drug design and delivery, medicine, and more.
Download or read book Modeling Characterization and Production of Nanomaterials written by and published by Elsevier. This book was released on 2015-03-17 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nano-scale materials have unique electronic, optical, and chemical properties which make them attractive for a new generation of devices. Part one of Modeling, Characterization, and Production of Nanomaterials: Electronics, Photonics and Energy Applications covers modeling techniques incorporating quantum mechanical effects to simulate nanomaterials and devices, such as multiscale modeling and density functional theory. Part two describes the characterization of nanomaterials using diffraction techniques and Raman spectroscopy. Part three looks at the structure and properties of nanomaterials, including their optical properties and atomic behaviour. Part four explores nanofabrication and nanodevices, including the growth of graphene, GaN-based nanorod heterostructures and colloidal quantum dots for applications in nanophotonics and metallic nanoparticles for catalysis applications. Comprehensive coverage of the close connection between modeling and experimental methods for studying a wide range of nanomaterials and nanostructures Focus on practical applications and industry needs, supported by a solid outlining of theoretical background Draws on the expertise of leading researchers in the field of nanomaterials from around the world
Download or read book Carbon Nanotube Field Effect Transistor written by Fouad Sabry and published by One Billion Knowledgeable. This book was released on 2022-07-10 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: What Is Carbon Nanotube Field Effect Transistor A carbon nanotube field-effect transistor, also known as a CNTFET, is a kind of field-effect transistor that makes use of a single carbon nanotube or an array of carbon nanotubes as the channel material in place of bulk silicon, as is done in the conventional MOSFET construction. Since they were first exhibited in 1998, there have been significant advancements in CNTFET technology. How You Will Benefit (I) Insights, and validations about the following topics: Chapter 1: Carbon nanotube field-effect transistor Chapter 2: Carbon nanotube Chapter 3: JFET Chapter 4: Schottky barrier Chapter 5: Electron mobility Chapter 6: Nanoelectromechanical systems Chapter 7: Threshold voltage Chapter 8: Organic field-effect transistor Chapter 9: Ballistic conduction Chapter 10: Hybrid solar cell Chapter 11: Potential applications of carbon nanotubes Chapter 12: Carbon nanotubes in photovoltaics Chapter 13: Optical properties of carbon nanotubes Chapter 14: Carbon nanotube nanomotor Chapter 15: NanoIntegris Chapter 16: Ballistic conduction in single-walled carbon nanotubes Chapter 17: Tunnel field-effect transistor Chapter 18: Field-effect transistor Chapter 19: Carbon nanotubes in interconnects Chapter 20: Synthesis of carbon nanotubes Chapter 21: Vertically aligned carbon nanotube arrays (II) Answering the public top questions about carbon nanotube field effect transistor. (III) Real world examples for the usage of carbon nanotube field effect transistor in many fields. (IV) 17 appendices to explain, briefly, 266 emerging technologies in each industry to have 360-degree full understanding of carbon nanotube field effect transistor' technologies. Who This Book Is For Professionals, undergraduate and graduate students, enthusiasts, hobbyists, and those who want to go beyond basic knowledge or information for any kind of carbon nanotube field effect transistor.
Download or read book Predictive Technology Model for Robust Nanoelectronic Design written by Yu Cao and published by Springer Science & Business Media. This book was released on 2011-07-12 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Predictive Technology Model for Robust Nanoelectronic Design explains many of the technical mysteries behind the Predictive Technology Model (PTM) that has been adopted worldwide in explorative design research. Through physical derivation and technology extrapolation, PTM is the de-factor device model used in electronic design. This work explains the systematic model development and provides a guide to robust design practice in the presence of variability and reliability issues. Having interacted with multiple leading semiconductor companies and university research teams, the author brings a state-of-the-art perspective on technology scaling to this work and shares insights gained in the practices of device modeling.
Download or read book Physics of Semiconductor Devices written by V. K. Jain and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this workshop is to spread the vast amount of information available on semiconductor physics to every possible field throughout the scientific community. As a result, the latest findings, research and discoveries can be quickly disseminated. This workshop provides all participating research groups with an excellent platform for interaction and collaboration with other members of their respective scientific community. This workshop’s technical sessions include various current and significant topics for applications and scientific developments, including • Optoelectronics • VLSI & ULSI Technology • Photovoltaics • MEMS & Sensors • Device Modeling and Simulation • High Frequency/ Power Devices • Nanotechnology and Emerging Areas • Organic Electronics • Displays and Lighting Many eminent scientists from various national and international organizations are actively participating with their latest research works and also equally supporting this mega event by joining the various organizing committees.
Download or read book Nanoelectronic Mixed Signal System Design written by Saraju Mohanty and published by McGraw Hill Professional. This book was released on 2015-02-20 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering both the classical and emerging nanoelectronic technologies being used in mixed-signal design, this book addresses digital, analog, and memory components. Winner of the Association of American Publishers' 2016 PROSE Award in the Textbook/Physical Sciences & Mathematics category. Nanoelectronic Mixed-Signal System Design offers professionals and students a unified perspective on the science, engineering, and technology behind nanoelectronics system design. Written by the director of the NanoSystem Design Laboratory at the University of North Texas, this comprehensive guide provides a large-scale picture of the design and manufacturing aspects of nanoelectronic-based systems. It features dual coverage of mixed-signal circuit and system design, rather than just digital or analog-only. Key topics such as process variations, power dissipation, and security aspects of electronic system design are discussed. Top-down analysis of all stages--from design to manufacturing Coverage of current and developing nanoelectronic technologies--not just nano-CMOS Describes the basics of nanoelectronic technology and the structure of popular electronic systems Reveals the techniques required for design excellence and manufacturability
Download or read book Electrical Characterization and Device Applications of Individual Singled wall Carbon Nanotubes written by Ali Javey and published by . This book was released on 2005 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Nanotubes and Their Applications written by Qing Zhang and published by CRC Press. This book was released on 2012-04-23 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book overviews the current status of research and development activities of CNTs in nanodevices, nanomaterials, or nanofabrication. This book presents 15 state-of-the-art review articles that cover CNT synthesis technologies for growing highly orientated CNTs, chirality-pure CNTs and CNTs at a large throughput and low cost, CNT assembly techniques, CNT sorting and separation processes, CNT functionalization engineering for more functionalities, CNT fundamental properties and their practical/potential electrical, electronic, optical, mechanical, chemical and biological applications.
Download or read book Adiabatic Logic written by Philip Teichmann and published by Springer Science & Business Media. This book was released on 2011-10-29 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adiabatic logic is a potential successor for static CMOS circuit design when it comes to ultra-low-power energy consumption. Future development like the evolutionary shrinking of the minimum feature size as well as revolutionary novel transistor concepts will change the gate level savings gained by adiabatic logic. In addition, the impact of worsening degradation effects has to be considered in the design of adiabatic circuits. The impact of the technology trends on the figures of merit of adiabatic logic, energy saving potential and optimum operating frequency, are investigated, as well as degradation related issues. Adiabatic logic benefits from future devices, is not susceptible to Hot Carrier Injection, and shows less impact of Bias Temperature Instability than static CMOS circuits. Major interest also lies on the efficient generation of the applied power-clock signal. This oscillating power supply can be used to save energy in short idle times by disconnecting circuits. An efficient way to generate the power-clock is by means of the synchronous 2N2P LC oscillator, which is also robust with respect to pattern-induced capacitive variations. An easy to implement but powerful power-clock gating supplement is proposed by gating the synchronization signals. Diverse implementations to shut down the system are presented and rated for their applicability and other aspects like energy reduction capability and data retention. Advantageous usage of adiabatic logic requires compact and efficient arithmetic structures. A broad variety of adder structures and a Coordinate Rotation Digital Computer are compared and rated according to energy consumption and area usage, and the resulting energy saving potential against static CMOS proves the ultra-low-power capability of adiabatic logic. In the end, a new circuit topology has to compete with static CMOS also in productivity. On a 130nm test chip, a large scale test vehicle containing an FIR filter was implemented in adiabatic logic, utilizing a standard, library-based design flow, fabricated, measured and compared to simulations of a static CMOS counterpart, with measured saving factors compliant to the values gained by simulation. This leads to the conclusion that adiabatic logic is ready for productive design due to compatibility not only to CMOS technology, but also to electronic design automation (EDA) tools developed for static CMOS system design.
Download or read book Carbon Nanotubes written by Jose Mauricio Marulanda and published by BoD – Books on Demand. This book was released on 2011-08-01 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs), discovered in 1991, have been a subject of intensive research for a wide range of applications. In the past decades, although carbon nanotubes have undergone massive research, considering the success of silicon, it has, nonetheless, been difficult to appreciate the potential influence of carbon nanotubes in current technology. The main objective of this book is therefore to give a wide variety of possible applications of carbon nanotubes in many industries related to electron device technology. This should allow the user to better appreciate the potential of these innovating nanometer sized materials. Readers of this book should have a good background on electron devices and semiconductor device physics as this book presents excellent results on possible device applications of carbon nanotubes. This book begins with an analysis on fabrication techniques, followed by a study on current models, and it presents a significant amount of work on different devices and applications available to current technology.
Download or read book Carbon Nanotube Devices written by and published by John Wiley & Sons. This book was released on 2008-05-05 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following on from the first AMN volume, this handy reference and textbook examines the topic of nanosystem design in further detail. It explains the physical and chemical basics behind the design and fabrication of nanodevices, covering all important, recent advances in the field, while introducing nanosystems to less experienced readers. The result is an important source for a fast, accurate overview of the state of the art of nanosystem realization, summarizing further important literature.
Download or read book Modeling Characterization and Production of Nanomaterials written by Vinod Tewary and published by Woodhead Publishing. This book was released on 2022-11-09 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nano-scale materials have unique electronic, optical, and chemical properties that make them attractive for a new generation of devices. In the second edition of Modeling, Characterization, and Production of Nanomaterials: Electronics, Photonics, and Energy Applications, leading experts review the latest advances in research in the understanding, prediction, and methods of production of current and emerging nanomaterials for key applications. The chapters in the first half of the book cover applications of different modeling techniques, such as Green's function-based multiscale modeling and density functional theory, to simulate nanomaterials and their structures, properties, and devices. The chapters in the second half describe the characterization of nanomaterials using advanced material characterization techniques, such as high-resolution electron microscopy, near-field scanning microwave microscopy, confocal micro-Raman spectroscopy, thermal analysis of nanoparticles, and applications of nanomaterials in areas such as electronics, solar energy, catalysis, and sensing. The second edition includes emerging relevant nanomaterials, applications, and updated modeling and characterization techniques and new understanding of nanomaterials. - Covers the close connection between modeling and experimental methods for studying a wide range of nanomaterials and nanostructures - Focuses on practical applications and industry needs through a solid outlining of the theoretical background - Includes emerging nanomaterials and their applications in spintronics and sensing
Download or read book Advances in Materials Processing and Manufacturing Applications written by Amar Patnaik and published by Springer Nature. This book was released on 2021-06-22 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the International Conference on Advances in Materials Processing and Manufacturing Applications (iCADMA 2020), held on November 5–6, 2020, at Malaviya National Institute of Technology, Jaipur, India. iCADMA 2020 proceedings is divided into four topical tracks – Advanced Materials, Materials Manufacturing and Processing, Engineering Optimization and Sustainable Development, and Tribology for Industrial Application.
Download or read book Doping of Carbon Nanotubes written by Sergey Bulyarskiy and published by Springer. This book was released on 2017-07-01 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the control of electronic properties of carbon nanotubes. It presents thermodynamic calculations of the formation of impurities and defects in the interaction of nanotubes with hydrogen, oxygen, nitrogen and boron, based on theoretical models of the formation of defects in carbon nanotubes. It is shown that doping and adsorption lead to changes in the electronic structure of the tubes as well as to the appearance of impurity states in the HOMO-LUMO gap. The book presents examples of specific calculations for doping of carbon nanotubes with oxygen, hydrogen, nitrogen and boron, together with numerous experimental results and a comparison with the author’s thermodynamic calculations. Possible directions of the technological processes of optimization are pointed out, as well as the perspectives of p-n-transition creation with the help of carbon nanotube arrays. The results presented were derived from the physics of the processes and a theoretical model of the technological processes. Though a wealth of empirical information on doping nanotubes has been accumulated in the scientific literature, what is lacking is a theoretical model for their analysis. As such, the book develops a thermodynamic model of the self-organization of structural elements in multicomponent systems – including carbon nanotubes, clusters and precipitates in condensed matter – and subsequently adapts it to the doping of carbon nanotubes. This approach allows readers to gain a far deeper understanding of the processes of doping carbon nanotubes.
