Download or read book Challenges in Design and Implementation of Middlewares for Real Time Systems written by Wei Zhao and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Challenges in Design and Implementation of Middlewares for Real-Time Systems brings together in one place important contributions and up-to-date research results in this fast moving area. Challenges in Design and Implementation of Middlewares for Real-Time Systems serves as an excellent reference, providing insight into some of the most challenging research issues in the field.
Download or read book Scalable and Efficient Middleware for Real time Embedded Systems written by Florentin Picioroaga and published by . This book was released on 2004 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: The task to design and implement a middleware for embedded real-time systems has, near the normal challenges for building a usual middleware, two additional difficult demands: 1) it must maintain the real-time features of the underlying environment and, 2) it must adapt in the same time to powerful systems and, moreover, fit on small systems (embedded systems). This thesis presents the research done in providing a solution for these problems - OSA+ middleware. The proposed solution is using a well known concept from operating systems - the microkernel architecture. Adapting this concept to a middleware brings a serie of advantages and disadvatages which are analyzed in this thesis.
Download or read book Distributed Real Time Systems written by K. Erciyes and published by Springer. This book was released on 2019-07-23 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classroom-tested textbook describes the design and implementation of software for distributed real-time systems, using a bottom-up approach. The text addresses common challenges faced in software projects involving real-time systems, and presents a novel method for simply and effectively performing all of the software engineering steps. Each chapter opens with a discussion of the core concepts, together with a review of the relevant methods and available software. This is then followed with a description of the implementation of the concepts in a sample kernel, complete with executable code. Topics and features: introduces the fundamentals of real-time systems, including real-time architecture and distributed real-time systems; presents a focus on the real-time operating system, covering the concepts of task, memory, and input/output management; provides a detailed step-by-step construction of a real-time operating system kernel, which is then used to test various higher level implementations; describes periodic and aperiodic scheduling, resource management, and distributed scheduling; reviews the process of application design from high-level design methods to low-level details of design and implementation; surveys real-time programming languages and fault tolerance techniques; includes end-of-chapter review questions, extensive C code, numerous examples, and a case study implementing the methods in real-world applications; supplies additional material at an associated website. Requiring only a basic background in computer architecture and operating systems, this practically-oriented work is an invaluable study aid for senior undergraduate and graduate-level students of electrical and computer engineering, and computer science. The text will also serve as a useful general reference for researchers interested in real-time systems.
Download or read book Real Time Systems written by Hermann Kopetz and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: 7. 6 Performance Comparison: ET versus TT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 7. 7 The Physical Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 Points to Remember . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 Chapter 8: The Time-Triggered Protocols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 8. 1 Introduction to Time-Triggered Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 8. 2 Overview of the TTP/C Protocol Layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 8. 3 TheBasic CNI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 Internal Operation of TTP/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 8. 4 8. 5 TTP/A for Field Bus Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Review Questions and Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Chapter 9: Input/Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 9. 1 The Dual Role of Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 9. 2 Agreement Protocol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 9. 3 Sampling and Polling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198 9. 4 Interrupts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 9. 5 Sensors and Actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 9. 6 Physical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Chapter 10: Real-Time Operating Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 10. 1 Task Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 10. 2 Interprocess Communication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 10. 3 Time Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 10. 4 Error Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 10. 5 A Case Study: ERCOS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 Bibliographic Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Chapter 11: Real-Time Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 11. 1 The Scheduling Problem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228 11. 2 The Adversary Argument. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 11. 3 Dynamic Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 x TABLE OF CONTENTS 11. 4 Static Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 Bibliographic Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 Review Questions and Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 Chapter 12: Validation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 12. 1 Building aConvincing Safety Case. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246 12. 2 Formal Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248 12. 3 Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Download or read book Software Engineering and Middleware written by Thomas Gschwind and published by Springer. This book was released on 2005-03-31 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: Middleware provides an integration framework for multiple and potentially - verse computing platforms. It allows developers to engineer distributed appli- tions more easily, providing abstractions and primitives to handle distribution and coordination. Middlewareisconstantlyfacingnewchallenges.Today’sadvancesincomp- ing, including development of pervasive applications, exacerbates the diversity problem, introducing variations not only in terms of performance, but also in terms of environments and device characteristics. Software engineers are the- fore challenged both in the area of the development of new and scalable m- dleware systems, where open, heterogeneous, component-based platforms should provide richer functionality and services, and in the area of application devel- ment, where tools to simplify the use of middleware solutions are necessary. Software Engineering and Middleware is the premier workshop for the - search and practice community of software engineering working in both areas to presentanddiscussnewideasinthis?eld.SEM2004wasthefourthinternational workshop on software engineering and middleware of the EDO/SEM workshop series. Previous workshops of this series were successfully held in 2002, 2000 and 1999. Most of the proceedings have been published by Springer in the Lecture Notes in Computer Science series.
Download or read book Embedded Systems Handbook written by Richard Zurawski and published by CRC Press. This book was released on 2017-12-19 with total page 837 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considered a standard industry resource, the Embedded Systems Handbook provided researchers and technicians with the authoritative information needed to launch a wealth of diverse applications, including those in automotive electronics, industrial automated systems, and building automation and control. Now a new resource is required to report on current developments and provide a technical reference for those looking to move the field forward yet again. Divided into two volumes to accommodate this growth, the Embedded Systems Handbook, Second Edition presents a comprehensive view on this area of computer engineering with a currently appropriate emphasis on developments in networking and applications. Those experts directly involved in the creation and evolution of the ideas and technologies presented offer tutorials, research surveys, and technology overviews that explore cutting-edge developments and deployments and identify potential trends. This second self-contained volume of the handbook, Network Embedded Systems, focuses on select application areas. It covers automotive field, industrial automation, building automation, and wireless sensor networks. This volume highlights implementations in fast-evolving areas which have not received proper coverage in other publications. Reflecting the unique functional requirements of different application areas, the contributors discuss inter-node communication aspects in the context of specific applications of networked embedded systems. Those looking for guidance on preliminary design of embedded systems should consult the first volume: Embedded Systems Design and Verification.
Download or read book Embedded Systems Handbook 2 Volume Set written by Richard Zurawski and published by CRC Press. This book was released on 2018-10-08 with total page 1503 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past few years there has been an dramatic upsurge in research and development, implementations of new technologies, and deployments of actual solutions and technologies in the diverse application areas of embedded systems. These areas include automotive electronics, industrial automated systems, and building automation and control. Comprising 48 chapters and the contributions of 74 leading experts from industry and academia, the Embedded Systems Handbook, Second Edition presents a comprehensive view of embedded systems: their design, verification, networking, and applications. The contributors, directly involved in the creation and evolution of the ideas and technologies presented, offer tutorials, research surveys, and technology overviews, exploring new developments, deployments, and trends. To accommodate the tremendous growth in the field, the handbook is now divided into two volumes. New in This Edition: Processors for embedded systems Processor-centric architecture description languages Networked embedded systems in the automotive and industrial automation fields Wireless embedded systems Embedded Systems Design and Verification Volume I of the handbook is divided into three sections. It begins with a brief introduction to embedded systems design and verification. The book then provides a comprehensive overview of embedded processors and various aspects of system-on-chip and FPGA, as well as solutions to design challenges. The final section explores power-aware embedded computing, design issues specific to secure embedded systems, and web services for embedded devices. Networked Embedded Systems Volume II focuses on selected application areas of networked embedded systems. It covers automotive field, industrial automation, building automation, and wireless sensor networks. This volume highlights implementations in fast-evolving areas which have not received proper coverage in other publications. Reflecting the unique functional requirements of different application areas, the contributors discuss inter-node communication aspects in the context of specific applications of networked embedded systems.
Download or read book Middleware for Communications written by Qusay Mahmoud and published by John Wiley & Sons. This book was released on 2005-06-10 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: A state-of-the-art guide to middleware technologies, and their pivotal role in communications networks. Middleware is about integration and interoperability of applications and services running on heterogeneous computing and communications devices. The services it provides - including identification, authentication, authorization, soft-switching, certification and security - are used in a vast range of global appliances and systems, from smart cards and wireless devices to mobile services and e-Commerce. Qusay H. Mahmoud has created an invaluable reference tool that explores the origins and current uses of middleware (highlighting the importance of such technologies as CORBA, J2EE and JMS) and has thus compiled the roadmap to future research in this area. Middleware for Communications: discusses the emerging fields of Peer-to-Peer (P2P) and grid middleware detailing middleware platforms such as JXTA and the Globus middleware toolkit. shows how Middleware will play a significant role in mobile computing. presents a Platform Supporting Mobile Applications (PLASMA) - a middleware platform that consists of components for location, event, and profile handling of Location-Based Services. introduces middleware security focusing on the appropriate aspects of CORBA, J2EE, and .NET and demonstrates how to realize complex security capabilities such as role-based access control (RBAC) and mandatory access control (MAC). discusses how Quality of Service (QoS) component middleware can be combined with Model Driven Architecture (MDA) technologies to rapidly develop, generate, assemble and deploy flexible communications applications. This incomparable overview of middleware for communications is suitable for graduate students and researchers in communications and computing departments. It is also an authoritative guide for engineers and developers working on distributed systems, mobile computing and networked appliances.
Download or read book Handbook of Real Time and Embedded Systems written by Insup Lee and published by CRC Press. This book was released on 2007-07-23 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time and embedded systems are essential to our lives, from controlling car engines and regulating traffic lights to monitoring plane takeoffs and landings to providing up-to-the-minute stock quotes. Bringing together researchers from both academia and industry, the Handbook of Real-Time and Embedded Systems provides comprehensive covera
Download or read book On the Move to Meaningful Internet Systems 2005 CoopIS DOA and ODBASE written by R. Meersman and published by Springer Science & Business Media. This book was released on 2005-10-27 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set LNCS 3760/3761 constitutes the refereed proceedings of the three confederated conferences CoopIS 2005, DOA 2005, and ODBASE 2005 held as OTM 2005 in Agia Napa, Cyprus in October/November 2005. The 89 revised full and 7 short papers presented together with 3 keynote speeches were carefully reviewed and selected from a total of 360 submissions. Corresponding with the three OTM 2005 main conferences CoopIS, DOA, and ODBASE, the papers are organized in topical sections on workflow, workflow and business processes, mining and filtering, petri nets and processs management, information access and integrity, heterogeneity, semantics, querying and content delivery, Web services, agents, security, integrity and consistency, chain and collaboration mangement, Web services and service-oriented architectures, multicast and fault tolerance, communication services, techniques for application hosting, mobility, security and data persistence, component middleware, java environments, peer-to-peer computing architectures, aspect oriented middleware, information integration and modeling, query processing, ontology construction, metadata, information retrieval and classification, system verification and evaluation, and active rules and Web services.
Download or read book IT Architectures and Middleware written by Chris Britton and published by Pearson Education. This book was released on 2004-05-24 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: The challenges of designing, building, and maintaining large-scale, distributed enterprise systems are truly daunting. Written by and for IT professionals, IT Architectures and Middleware, Second Edition, will help you rise above the conflicts of new business objectives, new technologies, and vendor wars, allowing you to think clearly and productively about the particular challenges you face. This book focuses on the essential principles and priorities of system design and emphasizes the new requirements emerging from the rise of e-commerce and distributed, integrated systems. It offers a concise overview of middleware technology alternatives and distributed systems. Numerous increasingly complex examples are incorporated throughout, and the book concludes with some short case studies. Topics covered include: Middleware technology review Key principles of distributed systems: resiliency, performance and scalability, security, and systems management Information access requirements and data consistency Application integration design Recasting existing applications as services In this new edition, with updates throughout, coverage has been expanded to include: Service-oriented architecture concepts Web services and .NET technology A more structured approach to system integration design
Download or read book Self Organization in Embedded Real Time Systems written by M. Teresa Higuera-Toledano and published by Springer Science & Business Media. This book was released on 2012-11-09 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the emerging field of self-organizing, multicore, distributed and real-time embedded systems. Self ‐organization of both hardware and software can be a key technique to handle the growing complexity of modern computing systems. Distributed systems running hundreds of tasks on dozens of processors, each equipped with multiple cores, requires self‐organization principles to ensure efficient and reliable operation. This book addresses various, so-called Self‐X features such as self-configuration, self‐optimization, self‐adaptation, self‐healing and self‐protection.
Download or read book Information Control Problems in Manufacturing 2004 2 volume Set written by Peter Kopacek and published by Gulf Professional Publishing. This book was released on 2005-08-12 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book On the Move to Meaningful Internet Systems 2004 OTM 2004 Workshops written by R. Meersman and published by Springer Science & Business Media. This book was released on 2004-10-14 with total page 905 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the joint refereed proceedings of seven international workshops held as part of OTM 2004 in Agia Napa, Cyprus in October 2004. The 73 revised papers presented together with 31 abstracts of posters from the OTM main conferences were carefully reviewed and selected from more than 150 submissions. In accordance with the 7 workshops, the papers are organized in topical sections on grid computing and its applications to data analysis; Java technologies for real-time and embedded systems; modeling inter-organizational systems; regulatory ontologies; ontologies, semantics and e-learning; PhD symposium; and interoperability.
Download or read book On the Move to Meaningful Internet Systems 2004 OTM 2004 Workshops written by Zahir Tari and published by Springer. This book was released on 2004-10-14 with total page 905 pages. Available in PDF, EPUB and Kindle. Book excerpt: A special mention for 2004 is in order for the new Doctoral Symposium Workshop where three young postdoc researchers organized an original setup and formula to bring PhD students together and allow them to submit their research proposals for selection. A limited number of the submissions and their approaches were independently evaluated by a panel of senior experts at the conference, and presented by the students in front of a wider audience. These students also got free access to all other parts of the OTM program, and only paid a heavily discounted fee for the Doctoral Symposium itself. (In fact their attendance was largely sponsored by the other participants!) If evaluated as successful, it is the intention of the General Chairs to expand this model in future editions of the OTM conferences and so draw in an audience of young researchers to the OnTheMove forum. All three main conferences and the associated workshops share the d- tributed aspects of modern computing systems, and the resulting applicati- pull created by the Internet and the so-called Semantic Web. For DOA 2004, the primary emphasis stayed on the distributed object infrastructure; for ODBASE 2004, it was the knowledge bases and methods required for enabling the use of formalsemantics;andforCoopIS2004themaintopicwastheinteractionofsuch technologies and methods with management issues, such as occurs in networked organizations. These subject areas naturally overlap and many submissions in factalsotreatenvisagedmutualimpactsamongthem.
Download or read book Middleware 2008 written by Valérie Issarny and published by Springer Science & Business Media. This book was released on 2008-11-24 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the ACM/IFIP/USENIX 9th International Middleware Conference 2008, held in Leuven, Belgium, in December 2008. The 21 revised full papers presented were carefully reviewed and selected from 117 submissions for inclusion in the book. The papers are organized in topical sections on platforms extended to new capabilities, advanced software engineering focusing on specific system properties, system management techniques, as well as components and system algorithms and properties.
Download or read book Demystifying Embedded Systems Middleware written by Tammy Noergaard and published by Elsevier. This book was released on 2010-11-04 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical technical guide to embedded middleware implementation offers a coherent framework that guides readers through all the key concepts necessary to gain an understanding of this broad topic. Big picture theoretical discussion is integrated with down-to-earth advice on successful real-world use via step-by-step examples of each type of middleware implementation. Technically detailed case studies bring it all together, by providing insight into typical engineering situations readers are likely to encounter. Expert author Tammy Noergaard keeps explanations as simple and readable as possible, eschewing jargon and carefully defining acronyms. The start of each chapter includes a "setting the stage" section, so readers can take a step back and understand the context and applications of the information being provided. Core middleware, such as networking protocols, file systems, virtual machines, and databases; more complex middleware that builds upon generic pieces, such as MOM, ORB, and RPC; and integrated middleware software packages, such as embedded JVMs, .NET, and CORBA packages are all demystified. Embedded middleware theory and practice that will get your knowledge and skills up to speed Covers standards, networking, file systems, virtual machines, and more Get hands-on programming experience by starting with the downloadable open source code examples from book website