Download or read book Challenges and Prospects of Steelmaking Towards the Year 2050 written by Lauri Holappa and published by Mdpi AG. This book was released on 2022-01-03 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world steel industry is strongly based on coal/coke in ironmaking, resulting in huge carbon dioxide emissions corresponding to approximately 7% of the total anthropogenic CO2 emissions. As the world is experiencing a period of imminent threat owing to climate change, the steel industry is also facing a tremendous challenge in next decades. This themed issue makes a survey on the current situation of steel production, energy consumption, and CO2 emissions, as well as cross-sections of the potential methods to decrease CO2 emissions in current processes via improved energy and materials efficiency, increasing recycling, utilizing alternative energy sources, and adopting CO2 capture and storage. The current state, problems and plans in the two biggest steel producing countries, China and India are introduced. Generally contemplating, incremental improvements in current processes play a key role in rapid mitigation of specific emissions, but finally they are insufficient when striving for carbon neutral production in the long run. Then hydrogen and electrification are the apparent solutions also to iron and steel production. The book gives a holistic overview of the current situation and challenges, and an inclusive compilation of the potential technologies and solutions for the global CO2 emissions problem.
Download or read book Sustainability and Smart Manufacturing written by Bożena Gajdzik and published by Taylor & Francis. This book was released on 2024-08-05 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses three key aspects of business operations: sustainability, human factors, and smart manufacturing, which make up modern business. The authors share their experiences in the transformation of enterprises to Industry 4.0/5.0 and the sustainability of steel production, as well as the reorganization of human factors using the example of the steel sector. The steel industry is covered both from a global perspective (key producers in the global steel market), as well as from a local and sectoral perspective (the companies that make up the sector of metal and metal product producers, using Poland as an example). This insightful book discusses how the steel industry can develop intelligent solutions to enhance sustainable performance and the challenges they must overcome, including policy and regulation. Case studies evaluate how steel companies are investing in new technologies that meet environmental requirements but also human resource development to enhance digital skills and competencies of the workforce. The book will find an audience across disciplines but be of particular value to scholars of industrial, operations, and technology management.
Download or read book Impact and Opportunities of Artificial Intelligence Techniques in the Steel Industry written by Valentina Colla and published by Springer Nature. This book was released on 2021-02-04 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects perceptions and needs expectations and experiences concerning the application of Artificial Intelligence (AI) and Machine Learning in the steel sector. It contains a selection of themes discussed within the Workshop entitled “Impact and Opportunities of Artificial Intelligence in the Steel Industry” organized by the European Steel Technology Platform as an online event from October 15 until November 5, 2020. The event aimed at analyzing the diffusion of AI technologies in steelworks and at providing indications for future research, development and innovation actions addressing the sector demands. The chapters treat general analyses on transversal themes and applications for process optimization, product quality enhancement, yield increase, optimal exploitation of resources and smart data handling. The book is devoted to researchers and technicians in the steel or AI fields as well as for managers and policymakers exploring the opportunities provided by AI in industry.
Download or read book Ironmaking and Steelmaking written by Zushu Li and published by MDPI. This book was released on 2019-08-13 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel is a critical material in our societies and will remain an important one for a long time into the future. In the last two decades, the world steel industry has gone through drastic changes and this is predicted to continue in the future. The Asian countries (e.g. China, India) have been dominant in the production of steel creating global over-capacity, while the steel industry in the developed countries have made tremendous efforts to reinforce its global leadership in process technology and product development, and remain sustainable and competitive. The global steel industry is also facing various grand challenges in strict environmental regulation, new energy and materials sources, and ever-increasing customer requirements for high quality steel products, which has been addressed accordingly by the global iron and steel community. This Special Issue, “Ironmaking and Steelmaking”, released by the journal Metals, published 33 high quality articles from the international iron and steel community, covering the state-of-the-art of the ironmaking and steelmaking processes. This includes fundamental understanding, experimental investigation, pilot plant trials, industrial applications and big data utilization in the improvement and optimization of existing processes, and research and development in transformative technologies. It is hoped that the creation of this special issue as a scientific platform will help drive the iron and steel community to build a sustainable steel industry.
Download or read book Steel Odyssey written by Ohjoon KWON and published by CRC Press. This book was released on 2024-07-03 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this wide-ranging interdisciplinary work, the authors draw on history, anthropology, and materials engineering to present a comprehensive and ambitious examination of the multifaceted roles of iron and steel throughout history and the current and future challenges faced by the steel industry. Ohjoon Kwon, Joo Choi, and Hae-Geon Lee provide readers with an in-depth understanding of the history of iron and steel and their impact on human society from a materials engineering perspective. They begin by describing the characteristics of iron and steel and the history of human use of and interaction with these metals by compiling the fundamental knowledge necessary to understand iron’s unique properties and metallurgical phenomena. Following this, they explain the influence of steel on human society and culture, focusing on Industrial Revolution and warfare. They also give examples that are rarely discussed elsewhere, such as developments in Asia or iron’s influence on thought and philosophy using Confucianism and Marxism as examples. Readers will then be able to apply this contextual knowledge to address the profound impact of emerging challenges, such as global environmental issues and the Fourth Industrial Revolution. Despite the technical nature of this book, all terminology is fully explained to facilitate better comprehension for those who may not possess an engineering education or a direct interest in metallurgy. This book is therefore invaluable not only as a technical book but also as a guide to the development history of human civilization and its future challenges.
Download or read book Clean Ironmaking and Steelmaking Processes written by Pasquale Cavaliere and published by Springer. This book was released on 2019-07-18 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the available technologies that can be employed to reduce energy consumption and greenhouse emissions in the steel- and ironmaking industries. Ironmaking and steelmaking are some of the largest emitters of carbon dioxide (over 2Gt per year) and have some of the highest energy demand (25 EJ per year) among all industries; to help mitigate this problem, the book examines how changes can be made in energy efficiency, including energy consumption optimization, online monitoring, and energy audits. Due to negligible regulations and unparalleled growth in these industries during the past 15-20 years, knowledge of best practices and innovative technologies for greenhouse gas remediation is paramount, and something this book addresses. Presents the most recent technological solutions in productivity analyses and dangerous emissions control and reduction in steelmaking plants; Examines the energy saving and emissions abatement efficiency for potential solutions to emission control and reduction in steelmaking plants; Discusses the application of the results of research conducted over the last ten years at universities, research centers, and industrial institutions.
Download or read book Advanced Manufacturing Technology in China A Roadmap to 2050 written by Tianran Wang and published by Springer Science & Business Media. This book was released on 2012-03-02 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: As one of the eighteen field-specific reports comprising the comprehensive scope of the strategic general report of the Chinese Academy of Sciences, this sub-report addresses long-range planning for developing science and technology in the field of advanced manufacturing technology. They each craft a roadmap for their sphere of development to 2050. In their entirety, the general and sub-group reports analyze the evolution and laws governing the development of science and technology, describe the decisive impact of science and technology on the modernization process, predict that the world is on the eve of an impending S&T revolution, and call for China to be fully prepared for this new round of S&T advancement. Based on the detailed study of the demands on S&T innovation in China’s modernization, the reports draw a framework for eight basic and strategic systems of socio-economic development with the support of science and technology, work out China’s S&T roadmaps for the relevant eight basic and strategic systems in line with China’s reality, further detail S&T initiatives of strategic importance to China’s modernization, and provide S&T decision-makers with comprehensive consultations for the development of S&T innovation consistent with China’s reality. Supported by illustrations and tables of data, the reports provide researchers, government officials and entrepreneurs with guidance concerning research directions, the planning process, and investment. Founded in 1949, the Chinese Academy of Sciences is the nation’s highest academic institution in natural sciences. Its major responsibilities are to conduct research in basic and technological sciences, to undertake nationwide integrated surveys on natural resources and ecological environment, to provide the country with scientific data and consultations for government’s decision-making, to undertake government-assigned projects with regard to key S&T problems in the process of socio-economic development, to initiate personnel training, and to promote China’s high-tech enterprises through its active engagement in these areas.
Download or read book Global Renewables Outlook Energy Transformation 2050 written by International Renewable Energy Agency IRENA and published by International Renewable Energy Agency (IRENA). This book was released on 2020-04-01 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This outlook highlights climate-safe investment options until 2050, policies for transition and specific regional challenges. It also explores options to eventually cut emissions to zero.
Download or read book Celebrating 20 Years of CICECO Aveiro Institute of Materials Current and future perspectives in the use of Material Sciences Chemistry and Photonics for a more sustainable future written by Rute A. S. Ferreira and published by Frontiers Media SA. This book was released on 2023-11-22 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook on Climate Change and Technology written by Frauke Urban and published by Edward Elgar Publishing. This book was released on 2023-12-11 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely Handbook presents the latest knowledge on technological innovation for climate change mitigation and adaptation. Looking beyond technical fixes, it further draws on economics, politics and sociology to explore how modern technology can contribute to effective and socially just sustainability transitions.
Download or read book Cold Steel written by Tim Bouquet and published by Abacus. This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'Cold Steel' is the story of the biggest and most hard-fought industry takeover in recent years, bringing to life the cut and thrust of big businesses at war with each other.
Download or read book Low Carbon Europe written by Lonely Planet and published by Lonely Planet. This book was released on 2020-06-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: You don't need to take a flight to experience the best of Europe. The continent's high-speed and sleeper trains, electric vehicle recharging network and extensive cycle routes mean that it's possible to travel widely leaving a smaller carbon footprint. This collection of 80 detailed trip itineraries opens your eyes to what is possible without air travel.
Download or read book Ironmaking and Steelmaking Processes written by Pasquale Cavaliere and published by Springer. This book was released on 2016-09-02 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes improvements in the iron and steel making process in the past few decades. It also presents new and improved solutions to producing high quality products with low greenhouse emissions. In addition, it examines legislative regulations regarding greenhouse emissions all around the world and how to control these dangerous emissions in iron and steel making plants.
Download or read book UNESCO Science Report written by UNESCO and published by UNESCO Publishing. This book was released on 2021-06-18 with total page 757 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advancements in Renewable Energy and Green Hydrogen written by Raboaca, Maria Simona and published by IGI Global. This book was released on 2024-04-26 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand for sustainable energy solutions in rapidly evolving academic and industrial environments is at an all-time high. Challenges faced by those championing sustainability and energy solutions include the integration of green hydrogen, a clean and renewable energy carrier, into hybrid energy systems. Ensuring its traceability, certification, and efficient utilization creates an issue that academics, industry experts, and policymakers are struggling to solve. With the increasing importance of green hydrogen in reducing carbon emissions and addressing climate change, the need for a comprehensive guide to navigate this intricate territory is more pressing than ever. The Handbook of Research on Digitalization and Green Hydrogen Production is a groundbreaking book that provides a holistic and innovative approach to the challenges surrounding green hydrogen integration. It serves as a roadmap for academic scholars and industry professionals, providing deep insights into the various facets of green hydrogen, from production and storage to transportation and utilization. This book tackles the safety concerns associated with transporting green hydrogen and explores innovative technologies like Power-to-Gas-to-Power (P2G2P) and the conversion of hydrogen into ammonia. It also highlights the crucial role of standards and security regulations in ensuring the reliability of green hydrogen processes.
Download or read book DECARBONOMICS written by Charles Dumas and published by Profile Books. This book was released on 2021-10-21 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: A book of two halves, Decarbonomics first sets the scene of current global economics, outlining the effect of the pandemic, the trade war between the US and China and the resulting fragmentation of globalisation. In the second half of the book, leading financial analyst Charles Dumas examines the economic reasons for action on climate change, and what form that might take. Dumas argues that investment to combat the changing climate will provide not only a boost to growth but also a rebalancing of geopolitics, benefiting those economies best placed to exploit the new technologies - possibly away from the oil-rich Middle East and towards the sun-rich Southern Hemisphere. He also examines the implications of a carbon tax, shifting economics to forge a financial solution to climate change. Drawing on original analysis by one of the world's leading macroeconomic forecasters, Decarbonomics shows how climate-change economics has shifted from a story of necessary sacrifice to one of opportunity.
Download or read book Six Stops on the National Security Tour written by Miriam Pemberton and published by Taylor & Francis. This book was released on 2022-07-18 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. military economy incorporates hundreds of American communities. This is the first book to connect our national security apparatus to the local level via deeply reported portraits of six carefully selected locations, including military Meccas and out-of-the-way places. They are woven into the warfare economy by bases, nuclear weapons labs, and production sites. The book includes an invaluable overview of how the military is structured, how its budget is made, and what it costs. It also shows how the military economy perpetuates itself. In on-the-ground reporting, Pemberton traces the lines of connection between the tour stops presented here and our country’s foreign policy, industrial policy, and budget priorities. She examines the meaning of national security in the current moment, as climate change becomes what the military itself calls "an urgent and growing threat." And she dramatically demonstrates how redirecting our militarized foreign and industrial policy toward climate security can help these communities become part of the solution. For students, scholars, public servants, and all concerned citizens, this book is essential reading.
