Download or read book Challenges and New Trends in Power Electronic Devices Reliability written by Elio Chiodo and published by Mdpi AG. This book was released on 2021-05-31 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid increase in new power electronic devices and converters for electric transportation and smart grid technologies requires a deep analysis of their component performances, considering all of the different environmental scenarios, overload conditions, and high stress operations. Therefore, evaluation of the reliability and availability of these devices becomes fundamental both from technical and economical points of view. The rapid evolution of technologies and the high reliability level offered by these components have shown that estimating reliability through the traditional approaches is difficult, as historical failure data and/or past observed scenarios demonstrate. With the aim to propose new approaches for the evaluation of reliability, in this book, eleven innovative contributions are collected, all focused on the reliability assessment of power electronic devices and related components.
Download or read book Modern Power Electronic Devices written by Francesco Iannuzzo and published by Energy Engineering. This book was released on 2020-10 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power devices are key to modern power systems, performing functions such as inverting and changing voltages, buffering and switching. Following a device-centric approach, this book covers power electronic applications, semiconductor physics, materials science, application engineering, and key technologies such as MOSFET, IGBT and WBG.
Download or read book Reliability and Failure of Electronic Materials and Devices written by Milton Ohring and published by Academic Press. This book was released on 2014-10-14 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability and Failure of Electronic Materials and Devices is a well-established and well-regarded reference work offering unique, single-source coverage of most major topics related to the performance and failure of materials used in electronic devices and electronics packaging. With a focus on statistically predicting failure and product yields, this book can help the design engineer, manufacturing engineer, and quality control engineer all better understand the common mechanisms that lead to electronics materials failures, including dielectric breakdown, hot-electron effects, and radiation damage. This new edition adds cutting-edge knowledge gained both in research labs and on the manufacturing floor, with new sections on plastics and other new packaging materials, new testing procedures, and new coverage of MEMS devices. Covers all major types of electronics materials degradation and their causes, including dielectric breakdown, hot-electron effects, electrostatic discharge, corrosion, and failure of contacts and solder joints New updated sections on "failure physics," on mass transport-induced failure in copper and low-k dielectrics, and on reliability of lead-free/reduced-lead solder connections New chapter on testing procedures, sample handling and sample selection, and experimental design Coverage of new packaging materials, including plastics and composites
Download or read book Semiconductor Power Devices written by Josef Lutz and published by Springer Science & Business Media. This book was released on 2011-01-15 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor power devices are the heart of power electronics. They determine the performance of power converters and allow topologies with high efficiency. Semiconductor properties, pn-junctions and the physical phenomena for understanding power devices are discussed in depth. Working principles of state-of-the-art power diodes, thyristors, MOSFETs and IGBTs are explained in detail, as well as key aspects of semiconductor device production technology. In practice, not only the semiconductor, but also the thermal and mechanical properties of packaging and interconnection technologies are essential to predict device behavior in circuits. Wear and aging mechanisms are identified and reliability analyses principles are developed. Unique information on destructive mechanisms, including typical failure pictures, allows assessment of the ruggedness of power devices. Also parasitic effects, such as device induced electromagnetic interference problems, are addressed. The book concludes with modern power electronic system integration techniques and trends.
Download or read book Microgrid Planning and Design written by Hassan Farhangi and published by John Wiley & Sons. This book was released on 2019-04-29 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to microgrid systems architecture, design topologies, control strategies and integration approaches Microgrid Planning and Design offers a detailed and authoritative guide to microgrid systems. The authors - noted experts on the topic - explore what is involved in the design of a microgrid, examine the process of mapping designs to accommodate available technologies and reveal how to determine the efficacy of the final outcome. This practical book is a compilation of collaborative research results drawn from a community of experts in 8 different universities over a 6-year period. Microgrid Planning and Design contains a review of microgrid benchmarks for the electric power system and covers the mathematical modeling that can be used during the microgrid design processes. The authors include real-world case studies, validated benchmark systems and the components needed to plan and design an effective microgrid system. This important guide: Offers a practical and up-to-date book that examines leading edge technologies related to the smart grid Covers in detail all aspects of a microgrid from conception to completion Explores a modeling approach that combines power and communication systems Recommends modeling details that are appropriate for the type of study to be performed Defines typical system studies and requirements associated with the operation of the microgrid Written forgraduate students and professionals in the electrical engineering industry, Microgrid Planning and Design is a guide to smart microgrids that can help with their strategic energy objectives such as increasing reliability, efficiency, autonomy and reducing greenhouse gases.
Download or read book Reliability in Power Electronics and Electrical Machines Industrial Applications and Performance Models written by Kaboli, Shahriyar and published by IGI Global. This book was released on 2016-03-08 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: In modern industries, electrical energy conversion systems consist of two main parts: electrical machines and power electronic converters. With global electricity use at an all-time high, uninterrupted operation of electrical power converters is essential. Reliability in Power Electronics and Electrical Machines: Industrial Applications and Performance Models provides an in-depth analysis of reliability in electrical energy converters as well as strategies for designing dependable power electronic converters and electrical machines. Featuring a comprehensive discussion on the topics of reliability design and measurement, failure mechanisms, and specific issues pertaining to quality, efficiency, and durability, this timely reference source offers practical examples and research-based results for use by engineers, researchers, and advanced-level students.
Download or read book Reliability of Power Electronic Converter Systems written by Henry Shu-hung Chung and published by IET. This book was released on 2015-12-07 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main aims of power electronic converter systems (PECS) are to control, convert, and condition electrical power flow from one form to another through the use of solid state electronics. This book outlines current research into the scientific modeling, experimentation, and remedial measures for advancing the reliability, availability, system robustness, and maintainability of PECS at different levels of complexity.
Download or read book Thermal Analysis of Power Electronic Devices Used in Renewable Energy Systems written by Alhussein Albarbar and published by Springer. This book was released on 2017-07-19 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book analyzes the thermal characteristics of power electronic devices (PEDs) with a focus on those used in wind and solar energy systems. The authors focus on the devices used in such applications, for example boost converters and inverters under different operating conditions. The book explains in detail finite element modeling techniques, setting up measuring systems, data analysis, and PEDs’ lifetime calculations. It is appropriate reading for graduate students and researchers who focus on the design and reliability of power electronic devices.
Download or read book Semiconductor Power Devices written by Josef Lutz and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses semiconductor properties, pn-junctions and the physical phenomena for understanding power devices in depth. Working principles of state-of-the-art power diodes, thyristors, MOSFETs and IGBTs are explained in detail, as well as key aspects of semiconductor device production technology. Special peculiarities of devices from the ascending semiconductor materials SiC and GaN are discussed. This book presents significant improvements compared to its first edition. It includes chapters on packaging and reliability. The chapter on semiconductor technology is written in a more in-depth way by considering 2D- and high concentration effects. The chapter on IGBTs is extended by new technologies and evaluation of its potential. An extended theory of cosmic ray failures is presented. The range of certain important physical relationships, doubted in recent papers for use in device simulation, is cleared and substantiated in this second edition.
Download or read book The Power of Change written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-09-30 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electricity, supplied reliably and affordably, is foundational to the U.S. economy and is utterly indispensable to modern society. However, emissions resulting from many forms of electricity generation create environmental risks that could have significant negative economic, security, and human health consequences. Large-scale installation of cleaner power generation has been generally hampered because greener technologies are more expensive than the technologies that currently produce most of our power. Rather than trade affordability and reliability for low emissions, is there a way to balance all three? The Power of Change: Innovation for Development and Deployment of Increasingly Clean Energy Technologies considers how to speed up innovations that would dramatically improve the performance and lower the cost of currently available technologies while also developing new advanced cleaner energy technologies. According to this report, there is an opportunity for the United States to continue to lead in the pursuit of increasingly clean, more efficient electricity through innovation in advanced technologies. The Power of Change: Innovation for Development and Deployment of Increasingly Clean Energy Technologies makes the case that America's advantagesâ€"world-class universities and national laboratories, a vibrant private sector, and innovative states, cities, and regions that are free to experiment with a variety of public policy approachesâ€"position the United States to create and lead a new clean energy revolution. This study focuses on five paths to accelerate the market adoption of increasing clean energy and efficiency technologies: (1) expanding the portfolio of cleaner energy technology options; (2) leveraging the advantages of energy efficiency; (3) facilitating the development of increasing clean technologies, including renewables, nuclear, and cleaner fossil; (4) improving the existing technologies, systems, and infrastructure; and (5) leveling the playing field for cleaner energy technologies. The Power of Change: Innovation for Development and Deployment of Increasingly Clean Energy Technologies is a call for leadership to transform the United States energy sector in order to both mitigate the risks of greenhouse gas and other pollutants and to spur future economic growth. This study's focus on science, technology, and economic policy makes it a valuable resource to guide support that produces innovation to meet energy challenges now and for the future.
Download or read book Practical Reliability Of Electronic Equipment And Products written by Eugene R. Hnatek and published by CRC Press. This book was released on 2002-10-25 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examining numerous examples of highly sensitive products, this book reviews basic reliability mathematics, describes robust design practices, and discusses the process of selecting suppliers and components. He focuses on the specific issues of thermal management, electrostatic discharge, electromagnetic compatibility, printed wiring assembly, environmental stress testing, and failure analysis. The book presents methods for meeting the reliability goals established for the manufacture of electronic product hardware and addresses the development of reliable software. The appendix provides example guidelines for the derating of electrical and electromechanical components.
Download or read book Energy Efficient Technologies for the Dismounted Soldier written by National Research Council and published by National Academies Press. This book was released on 1997-12-30 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents electric power requirements for the dismounted soldier on future Army battlefields, describes advanced energy concepts, and provides an integrated assessment of technologies likely to affect limitations and needs in the future. It surveys technologies associated with both supply and demand including: energy sources and systems; low power electronics and design; communications, computers, displays, and sensors; and networks, protocols, and operations. Advanced concepts discussed are predicated on continued development by the Army of soldier systems similar to the Land Warrior system on which the committee bases its projections on energy use. Finally, the volume proposes twenty research objectives to achieve energy goals in the 2025 time frame.
Download or read book Power Electronics Handbook written by Muhammad H. Rashid and published by Elsevier. This book was released on 2023-09-27 with total page 1472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics Handbook, Fifth Edition delivers an expert guide to power electronics and their applications. The book examines the foundations of power electronics, power semiconductor devices, and power converters, before reviewing a constellation of modern applications. Comprehensively updated throughout, this new edition features new sections addressing current practices for renewable energy storage, transmission, integration, and operation, as well as smart-grid security, intelligent energy, artificial intelligence, and machine learning applications applied to power electronics, and autonomous and electric vehicles. This handbook is aimed at practitioners and researchers undertaking projects requiring specialist design, analysis, installation, commissioning, and maintenance services. Provides a fully comprehensive work addressing each aspect of power electronics in painstaking depth Delivers a methodical technical presentation in over 1500 pages Includes 50+ contributions prepared by leading experts Offers practical support and guidance with detailed examples and applications for lab and field experimentation Includes new technical sections on smart-grid security and intelligent energy, artificial intelligence, and machine learning applications applied to power electronics and autonomous and electric vehicles Features new chapter level templates and a narrative progression to facilitate understanding
Download or read book Proceedings of the International Conference on Computational Innovations and Emerging Trends ICCIET 2024 written by K. Reddy Madhavi and published by Springer Nature. This book was released on 2024 with total page 1527 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Power Electronic Packaging written by Yong Liu and published by Springer Science & Business Media. This book was released on 2012-02-15 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronic Packaging presents an in-depth overview of power electronic packaging design, assembly,reliability and modeling. Since there is a drastic difference between IC fabrication and power electronic packaging, the book systematically introduces typical power electronic packaging design, assembly, reliability and failure analysis and material selection so readers can clearly understand each task's unique characteristics. Power electronic packaging is one of the fastest growing segments in the power electronic industry, due to the rapid growth of power integrated circuit (IC) fabrication, especially for applications like portable, consumer, home, computing and automotive electronics. This book also covers how advances in both semiconductor content and power advanced package design have helped cause advances in power device capability in recent years. The author extrapolates the most recent trends in the book's areas of focus to highlight where further improvement in materials and techniques can drive continued advancements, particularly in thermal management, usability, efficiency, reliability and overall cost of power semiconductor solutions.
Download or read book Issues in Electronics Research and Application 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 1976 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Electronics Research and Application: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Electronics Research and Application. The editors have built Issues in Electronics Research and Application: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Electronics Research and Application in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Electronics Research and Application: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Reliability Characterisation of Electrical and Electronic Systems written by Jonathan Swingler and published by Woodhead Publishing. This book was released on 2020-11-15 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book charts how reliability engineering has moved from the use of sometimes arbitrary standards to an empirical scientific approach of understanding operating conditions, failure mechanisms, the need for testing for a more realistic characterisation and, new for the second edition, includes the monitoring of performance/robustness in the field. Reliability Characterisation of Electrical and Electronic Systems brings together a number of experts and key players in the discipline to concisely present the fundamentals and background to reliability theory, elaborate on the current thinking and developments behind reliability characterisation, and give a detailed account of emerging issues across a wide range of applications. The second edition has a new section titled Reliability Condition Monitoring and Prognostics for Specific Application which provides a guide to critical issues in key industrial sectors such as automotive and aerospace. There are also new chapters on areas of growing importance such as reliability methods in high-temperature electronics and reliability and testing of electric aircraft power systems. Reviews emerging areas of importance such as reliability methods in high-temperature electronics and reliability testing of electric vehicles Looks at the failure mechanisms, testing methods, failure analysis, characterisation techniques and prediction models that can be used to increase reliability Facilitates a greater understanding of operating conditions, failure mechanisms and the need for testing
