EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Heat Transfer in Gas Turbines

Download or read book Heat Transfer in Gas Turbines written by Bengt Sundén and published by Witpress. This book was released on 2001 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title presents and reflects current active research on various heat transfer topics and related phenomena in gas turbine systems. It begins with a general introduction to gas turbine heat transfer, before moving on to specific areas.

Book Numerical Simulation of Flow and Heat Transfer of Internal Cooling Passage in Gas Turbine Blade

Download or read book Numerical Simulation of Flow and Heat Transfer of Internal Cooling Passage in Gas Turbine Blade written by Guoguang Su and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A computational study of three-dimensional turbulent flow and heat transfer was performed in four types of rotating channels. The first type is a rotating rectangular channel with V-shaped ribs. The channel aspect ratio (AR) is 4:1, the rib height-to-hydraulic diameter ratio (e/Dh) is 0.078 and the rib pitch-to-height ratio (P/e) is 10. The rotation number and inlet coolant-to-wall density ratio were varied from 0.0 to 0.28 and from 0.122 to 0.40, respectively, while the Reynolds number was varied from 10,000 to 500,000. Three channel orientations (90degrees, -135 degrees, and 135 degrees from the rotation direction) were also investigated. The second type is a rotating rectangular channel with staggered arrays of pinfins. The channel aspect ratio (AR) is 4:1, the pin length-to-diameter ratio is 2.0, and the pin spacing-to-diameter ratio is 2.0 in both the stream-wise and span-wise directions. The rotation number and inlet coolant-to-wall density ratio varied from 0.0 to 0.28 and from 0.122 to 0.20, respectively, while the Reynolds number varied from 10,000 to 100,000. For the rotating cases, the rectangular channel was oriented at 150 degrees with respect to the plane of rotation. In the rotating two-pass rectangular channel with 45-degree rib turbulators, three channels with different aspect ratios (AR=1:1; AR=1:2; AR=1:4) were investigated. Detailed predictions of mean velocity, mean temperature, and Nusselt number for two Reynolds numbers (Re=10,000 and Re=100,000) were carried out. The rib height is fixed as constant and the rib-pitch-to-height ratio (P/e) is 10, but the rib height-to-hydraulic diameter ratios (e/Dh) are 0.125, 0.094, and 0.078, for AR=1:1, AR=1:2, and AR=1:4 channels, respectively. The channel orientations are set as 90 degrees, the rotation number and inlet coolant-to-wall density ratio varied from 0.0 to 0.28 and from 0.13 to 0.40, respectively. The last type is the rotating two-pass smooth channel with three aspect ratios (AR=1:1; AR=1:2; AR=1:4). Detailed predictions of mean velocity, mean temperature and Nusselt number for two Reynolds numbers (Re=10,000 and Re=100,000) were carried out. The rotation number and inlet coolant-to-wall density ratio varied from 0.0 to 0.28 and from 0.13 to 0.40, respectively. A multi-block Reynolds-averaged Navier-Stokes (RANS) method was employed in conjunction with a near-wall second-moment turbulence closure.

Book Validation of a CFD Approach for Gas Turbine Internal Cooling Passage Heat Transfer Prediction

Download or read book Validation of a CFD Approach for Gas Turbine Internal Cooling Passage Heat Transfer Prediction written by Daniel Wilde and published by . This book was released on 2015 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Capability of various turbulence models in the representation of cooling physics is evaluated against experimental data. Model sensitivity to boundary conditions and mesh density is also evaluated.

Book Analysis of Temperature Distribution in Liquid cooled Turbine Blades

Download or read book Analysis of Temperature Distribution in Liquid cooled Turbine Blades written by John N. B. Livingood and published by . This book was released on 1951 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: One-dimensional spanwise temperature distributions gave satisfactory results near the coolant passages. One-dimensional chordwise distribution gave a good first approximation to the actual solution in cases where rim cooling was insignificant.

Book Gas Turbine Blade Cooling

Download or read book Gas Turbine Blade Cooling written by Chaitanya D Ghodke and published by SAE International. This book was released on 2018-12-10 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas turbines play an extremely important role in fulfilling a variety of power needs and are mainly used for power generation and propulsion applications. The performance and efficiency of gas turbine engines are to a large extent dependent on turbine rotor inlet temperatures: typically, the hotter the better. In gas turbines, the combustion temperature and the fuel efficiency are limited by the heat transfer properties of the turbine blades. However, in pushing the limits of hot gas temperatures while preventing the melting of blade components in high-pressure turbines, the use of effective cooling technologies is critical. Increasing the turbine inlet temperature also increases heat transferred to the turbine blade, and it is possible that the operating temperature could reach far above permissible metal temperature. In such cases, insufficient cooling of turbine blades results in excessive thermal stress on the blades causing premature blade failure. This may bring hazards to the engine's safe operation. Gas Turbine Blade Cooling, edited by Dr. Chaitanya D. Ghodke, offers 10 handpicked SAE International's technical papers, which identify key aspects of turbine blade cooling and help readers understand how this process can improve the performance of turbine hardware.

Book Cooling of Gas Turbines

Download or read book Cooling of Gas Turbines written by W. Byron Brown and published by . This book was released on 1947 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book CFD Predictions of Heat Transfer Coefficient Augmentation on a Simulated Film Cooled Turbine Blade Leading Edge

Download or read book CFD Predictions of Heat Transfer Coefficient Augmentation on a Simulated Film Cooled Turbine Blade Leading Edge written by Gwennaël Beirnaert-Chartrel and published by . This book was released on 2011 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computations were run to study heat transfer coefficient augmentation with film cooling for a simulated gas turbine blade leading edge. The realizable k-[epsilon] turbulence model (RKE) and Shear Stress Transport k-[omega] turbulence model (SST) were used for the computational simulations. RKE computations completed at a unity density ratio were confirmed to be consistent with experimental measurements conducted by Yuki et al.(1998) and Johnston et al. (1999) whereas SST computations exhibited significant discrepancies. Moreover the effect of the density ratio on heat transfer coefficient augmentation was studied because experimental measurements of heat transfer coefficient augmentation with film cooling are generally constrained to unity density ratio tests. It was shown that heat transfer coefficient augmentation can be simulated using unity density ratio jets, but only when scaled with the momentum flux ratio of the coolant jets.

Book Measurements and Computational Analysis of Heat Transfer and Flow in a Simulated Turbine Blade Internal Cooling Passage

Download or read book Measurements and Computational Analysis of Heat Transfer and Flow in a Simulated Turbine Blade Internal Cooling Passage written by Louis M. Russell and published by . This book was released on 1993 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Modelling and Simulation of Turbulent Heat Transfer

Download or read book Modelling and Simulation of Turbulent Heat Transfer written by B. Sundén and published by WIT Press. This book was released on 2005-02-21 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing invaluable information for both graduate researchers and R & D engineers in industry and consultancy, this book focuses on the modelling and simulation of fluid flow and thermal transport phenomena in turbulent convective flows. Its overall objective is to present state-of-the-art knowledge in order to predict turbulent heat transfer processes in fundamental and idealized flows as well as in engineering applications. The chapters, which are invited contributions from some of the most prominent scientists in this field, cover a wide range of topics and follow a unified outline and presentation to aid accessibility.

Book Gas Turbine Heat Transfer and Cooling Technology Second Edition

Download or read book Gas Turbine Heat Transfer and Cooling Technology Second Edition written by Je-Chin Han and published by CRC Press. This book was released on 2012-11-27 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference for engineers and researchers, Gas Turbine Heat Transfer and Cooling Technology, Second Edition has been completely revised and updated to reflect advances in the field made during the past ten years. The second edition retains the format that made the first edition so popular and adds new information mainly based on selected published papers in the open literature. See What’s New in the Second Edition: State-of-the-art cooling technologies such as advanced turbine blade film cooling and internal cooling Modern experimental methods for gas turbine heat transfer and cooling research Advanced computational models for gas turbine heat transfer and cooling performance predictions Suggestions for future research in this critical technology The book discusses the need for turbine cooling, gas turbine heat-transfer problems, and cooling methodology and covers turbine rotor and stator heat-transfer issues, including endwall and blade tip regions under engine conditions, as well as under simulated engine conditions. It then examines turbine rotor and stator blade film cooling and discusses the unsteady high free-stream turbulence effect on simulated cascade airfoils. From here, the book explores impingement cooling, rib-turbulent cooling, pin-fin cooling, and compound and new cooling techniques. It also highlights the effect of rotation on rotor coolant passage heat transfer. Coverage of experimental methods includes heat-transfer and mass-transfer techniques, liquid crystal thermography, optical techniques, as well as flow and thermal measurement techniques. The book concludes with discussions of governing equations and turbulence models and their applications for predicting turbine blade heat transfer and film cooling, and turbine blade internal cooling.

Book 34th Aerospace Sciences Meeting Exhibit

Download or read book 34th Aerospace Sciences Meeting Exhibit written by and published by . This book was released on 1996 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: