Download or read book Certified Control in Autonomous Vehicles with Visual Lane Finding and LiDAR written by Jeff T. Chow and published by . This book was released on 2021 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: Certified Control is a safety architecture for autonomous vehicles in which the controller must provide evidence to a runtime monitor that the actions it takes are safe. If the monitor deems the current state of the vehicle as unsafe, it intervenes by signalling the vehicle actuators to brake. In this work, we demonstrate how Certified Control can be used to increase safety through two implementations: one involving visual lane-finding and one involving LiDAR. Through experiments utilizing real driving data, a robot racecar, and simulation software, we show examples in which these runtime monitors detect and mitigate unsafe scenarios.

Download or read book Certified Control Safety Architecture for Autonomous Vehicles written by Valerie G. Richmond and published by . This book was released on 2020 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: Certified control is a safety architecture for autonomous vehicles, in which a safety monitor checks actions proposed by the main controller before they may be executed by the actuators. Unlike conventional runtime monitors, the certified control monitor receives an argument for the safety of the proposed action from the controller (rather than receiving data from the vehicle sensors directly). In this architecture, the monitor has the potential to do all of the following to a reasonable degree: intervene when safety is compromised, not intervene when safety is not compromised, and remain simple enough to be verifiable. First, this work describes the certified control architecture in detail, including how it achieves those three desiderata, which we argue are otherwise difficult to achieve simultaneously. Second, we present two novel applications of certified control: an implementation of LiDAR-based obstacle detection, and a LiDAR-augmented implementation of visual lane following. Finally, we evaluate those two systems using simulation and a physical robot car, and demonstrate that they indeed achieve the three desiderata.

Download or read book Testing Certified Control for LIDAR and Vision Perception Via Physical Testing and Simulation written by Mike M. Wang and published by . This book was released on 2020 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt: Certified control is a proposed safety architecture for autonomous vehicles. It consists of a runtime monitor that requires evidence from the vehicle’s main controller to prove that the controller’s desired action is safe. The monitor passes the command to the vehicle’s actuators if the action is deemed safe, and intervenes otherwise. In contrast to conventional runtime monitors that process perception data directly in order to evaluate the main controller’s decision, certified control places the burden of finding sufficient safety evidence on the main controller. Thus, a runtime monitor in the certified control architecture need only evaluate the proposed action against the relevant subset of the total perception data, reducing overall complexity of the monitor and opens the door to the application of software checking techniques like formal verification. This work describes deployment, testing, and evaluation of certified control on a physical platform and in simulation, using runtime monitors for LIDAR and vision data developed by fellow researchers. These tests successfully demonstrate certified control in simple scenarios, and lay the groundwork for further research into more complex scenarios via simulation.

Download or read book Automatic Laser Calibration Mapping and Localization for Autonomous Vehicles written by Jesse Sol Levinson and published by Stanford University. This book was released on 2011 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation presents several related algorithms that enable important capabilities for self-driving vehicles. Using a rotating multi-beam laser rangefinder to sense the world, our vehicle scans millions of 3D points every second. Calibrating these sensors plays a crucial role in accurate perception, but manual calibration is unreasonably tedious, and generally inaccurate. As an alternative, we present an unsupervised algorithm for automatically calibrating both the intrinsics and extrinsics of the laser unit from only seconds of driving in an arbitrary and unknown environment. We show that the results are not only vastly easier to obtain than traditional calibration techniques, they are also more accurate. A second key challenge in autonomous navigation is reliable localization in the face of uncertainty. Using our calibrated sensors, we obtain high resolution infrared reflectivity readings of the world. From these, we build large-scale self-consistent probabilistic laser maps of urban scenes, and show that we can reliably localize a vehicle against these maps to within centimeters, even in dynamic environments, by fusing noisy GPS and IMU readings with the laser in realtime. We also present a localization algorithm that was used in the DARPA Urban Challenge, which operated without a prerecorded laser map, and allowed our vehicle to complete the entire six-hour course without a single localization failure. Finally, we present a collection of algorithms for the mapping and detection of traffic lights in realtime. These methods use a combination of computer-vision techniques and probabilistic approaches to incorporating uncertainty in order to allow our vehicle to reliably ascertain the state of traffic-light-controlled intersections.

Download or read book Creating Autonomous Vehicle Systems Second Edition written by Liu Shaoshan and published by Springer Nature. This book was released on 2022-05-31 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is one of the first technical overviews of autonomous vehicles written for a general computing and engineering audience. The authors share their practical experiences designing autonomous vehicle systems. These systems are complex, consisting of three major subsystems: (1) algorithms for localization, perception, and planning and control; (2) client systems, such as the robotics operating system and hardware platform; and (3) the cloud platform, which includes data storage, simulation, high-definition (HD) mapping, and deep learning model training. The algorithm subsystem extracts meaningful information from sensor raw data to understand its environment and make decisions as to its future actions. The client subsystem integrates these algorithms to meet real-time and reliability requirements. The cloud platform provides offline computing and storage capabilities for autonomous vehicles. Using the cloud platform, new algorithms can be tested so as to update the HD map—in addition to training better recognition, tracking, and decision models. Since the first edition of this book was released, many universities have adopted it in their autonomous driving classes, and the authors received many helpful comments and feedback from readers. Based on this, the second edition was improved by extending and rewriting multiple chapters and adding two commercial test case studies. In addition, a new section entitled “Teaching and Learning from this Book” was added to help instructors better utilize this book in their classes. The second edition captures the latest advances in autonomous driving and that it also presents usable real-world case studies to help readers better understand how to utilize their lessons in commercial autonomous driving projects. This book should be useful to students, researchers, and practitioners alike. Whether you are an undergraduate or a graduate student interested in autonomous driving, you will find herein a comprehensive overview of the whole autonomous vehicle technology stack. If you are an autonomous driving practitioner, the many practical techniques introduced in this book will be of interest to you. Researchers will also find extensive references for an effective, deeper exploration of the various technologies.

Download or read book Hands On Vision and Behavior for Self Driving Cars written by Luca Venturi and published by Packt Publishing Ltd. This book was released on 2020-10-23 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to learning visual perception for self-driving cars for computer vision and autonomous system engineers Key FeaturesExplore the building blocks of the visual perception system in self-driving carsIdentify objects and lanes to define the boundary of driving surfaces using open-source tools like OpenCV and PythonImprove the object detection and classification capabilities of systems with the help of neural networksBook Description The visual perception capabilities of a self-driving car are powered by computer vision. The work relating to self-driving cars can be broadly classified into three components - robotics, computer vision, and machine learning. This book provides existing computer vision engineers and developers with the unique opportunity to be associated with this booming field. You will learn about computer vision, deep learning, and depth perception applied to driverless cars. The book provides a structured and thorough introduction, as making a real self-driving car is a huge cross-functional effort. As you progress, you will cover relevant cases with working code, before going on to understand how to use OpenCV, TensorFlow and Keras to analyze video streaming from car cameras. Later, you will learn how to interpret and make the most of lidars (light detection and ranging) to identify obstacles and localize your position. You’ll even be able to tackle core challenges in self-driving cars such as finding lanes, detecting pedestrian and crossing lights, performing semantic segmentation, and writing a PID controller. By the end of this book, you’ll be equipped with the skills you need to write code for a self-driving car running in a driverless car simulator, and be able to tackle various challenges faced by autonomous car engineers. What you will learnUnderstand how to perform camera calibrationBecome well-versed with how lane detection works in self-driving cars using OpenCVExplore behavioral cloning by self-driving in a video-game simulatorGet to grips with using lidarsDiscover how to configure the controls for autonomous vehiclesUse object detection and semantic segmentation to locate lanes, cars, and pedestriansWrite a PID controller to control a self-driving car running in a simulatorWho this book is for This book is for software engineers who are interested in learning about technologies that drive the autonomous car revolution. Although basic knowledge of computer vision and Python programming is required, prior knowledge of advanced deep learning and how to use sensors (lidar) is not needed.

Download or read book Autonomous Intelligent Vehicles written by Hong Cheng and published by Springer Science & Business Media. This book was released on 2011-11-15 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important text/reference presents state-of-the-art research on intelligent vehicles, covering not only topics of object/obstacle detection and recognition, but also aspects of vehicle motion control. With an emphasis on both high-level concepts, and practical detail, the text links theory, algorithms, and issues of hardware and software implementation in intelligent vehicle research. Topics and features: presents a thorough introduction to the development and latest progress in intelligent vehicle research, and proposes a basic framework; provides detection and tracking algorithms for structured and unstructured roads, as well as on-road vehicle detection and tracking algorithms using boosted Gabor features; discusses an approach for multiple sensor-based multiple-object tracking, in addition to an integrated DGPS/IMU positioning approach; examines a vehicle navigation approach using global views; introduces algorithms for lateral and longitudinal vehicle motion control.

Download or read book Learning to Drive written by David Michael Stavens and published by Stanford University. This book was released on 2011 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every year, 1.2 million people die in automobile accidents and up to 50 million are injured. Many of these deaths are due to driver error and other preventable causes. Autonomous or highly aware cars have the potential to positively impact tens of millions of people. Building an autonomous car is not easy. Although the absolute number of traffic fatalities is tragically large, the failure rate of human driving is actually very small. A human driver makes a fatal mistake once in about 88 million miles. As a co-founding member of the Stanford Racing Team, we have built several relevant prototypes of autonomous cars. These include Stanley, the winner of the 2005 DARPA Grand Challenge and Junior, the car that took second place in the 2007 Urban Challenge. These prototypes demonstrate that autonomous vehicles can be successful in challenging environments. Nevertheless, reliable, cost-effective perception under uncertainty is a major challenge to the deployment of robotic cars in practice. This dissertation presents selected perception technologies for autonomous driving in the context of Stanford's autonomous cars. We consider speed selection in response to terrain conditions, smooth road finding, improved visual feature optimization, and cost effective car detection. Our work does not rely on manual engineering or even supervised machine learning. Rather, the car learns on its own, training itself without human teaching or labeling. We show this "self-supervised" learning often meets or exceeds traditional methods. Furthermore, we feel self-supervised learning is the only approach with the potential to provide the very low failure rates necessary to improve on human driving performance.

Download or read book Autonomous Driving and Advanced Driver Assistance Systems ADAS written by Lentin Joseph and published by CRC Press. This book was released on 2021-12-15 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Autonomous Driving and Advanced Driver-Assistance Systems (ADAS): Applications, Development, Legal Issues, and Testing outlines the latest research related to autonomous cars and advanced driver-assistance systems, including the development, testing, and verification for real-time situations of sensor fusion, sensor placement, control algorithms, and computer vision. Features: Co-edited by an experienced roboticist and author and an experienced academic Addresses the legal aspect of autonomous driving and ADAS Presents the application of ADAS in autonomous vehicle parking systems With an infinite number of real-time possibilities that need to be addressed, the methods and the examples included in this book are a valuable source of information for academic and industrial researchers, automotive companies, and suppliers.

Download or read book Autonomous driving algorithms and Its IC Design written by Jianfeng Ren and published by Springer Nature. This book was released on 2023-08-09 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the rapid development of artificial intelligence and the emergence of various new sensors, autonomous driving has grown in popularity in recent years. The implementation of autonomous driving requires new sources of sensory data, such as cameras, radars, and lidars, and the algorithm processing requires a high degree of parallel computing. In this regard, traditional CPUs have insufficient computing power, while DSPs are good at image processing but lack sufficient performance for deep learning. Although GPUs are good at training, they are too “power-hungry,” which can affect vehicle performance. Therefore, this book looks to the future, arguing that custom ASICs are bound to become mainstream. With the goal of ICs design for autonomous driving, this book discusses the theory and engineering practice of designing future-oriented autonomous driving SoC chips. The content is divided into thirteen chapters, the first chapter mainly introduces readers to the current challenges and research directions in autonomous driving. Chapters 2–6 focus on algorithm design for perception and planning control. Chapters 7–10 address the optimization of deep learning models and the design of deep learning chips, while Chapters 11-12 cover automatic driving software architecture design. Chapter 13 discusses the 5G application on autonomous drving. This book is suitable for all undergraduates, graduate students, and engineering technicians who are interested in autonomous driving.

Download or read book Autonomous Vehicles for Safer Driving written by Ronald K Jurgen and published by SAE International. This book was released on 2013-04-16 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self-driving cars are no longer in the realm of science fiction, thanks to the integration of numerous automotive technologies that have matured over many years. Technologies such as adaptive cruise control, forward collision warning, lane departure warning, and V2V/V2I communications are being merged into one complex system. The papers in this compendium were carefully selected to bring the reader up to date on successful demonstrations of autonomous vehicles, ongoing projects, and what the future may hold for this technology. It is divided into three sections: overview, major design and test collaborations, and a sampling of autonomous vehicle research projects. The comprehensive overview paper covers the current state of autonomous vehicle research and development as well as obstacles to overcome and a possible roadmap for major new technology developments and collaborative relationships. The section on major design and test collaborations covers Sartre, DARPA contests, and the USDOT and the Crash Avoidance Metrics Partnership-Vehicle Safety Communications (CAMP-VSC2) Consortium. The final section presents seven SAE papers on significant recent and ongoing research by individual companies on a variety of approaches to autonomous vehicles. This book will be of interest to a wide range of readers: engineers at automakers and electronic component suppliers; software engineers; computer systems analysts and architects; academics and researchers within the electronics, computing, and automotive industries; legislators, managers, and other decision-makers in the government highway sector; traffic safety professionals; and insurance and legal practitioners.

Download or read book Artificial Intelligence for Autonomous Vehicles written by Sathiyaraj Rajendran and published by John Wiley & Sons. This book was released on 2024-02-27 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the advent of advanced technologies in AI, driverless vehicles have elevated curiosity among various sectors of society. The automotive industry is in a technological boom with autonomous vehicle concepts. Autonomous driving is one of the crucial application areas of Artificial Intelligence (AI). Autonomous vehicles are armed with sensors, radars, and cameras. This made driverless technology possible in many parts of the world. In short, our traditional vehicle driving may swing to driverless technology. Many researchers are trying to come out with novel AI algorithms that are capable of handling driverless technology. The current existing algorithms are not able to support and elevate the concept of autonomous vehicles. This addresses the necessity of novel methods and tools focused to design and develop frameworks for autonomous vehicles. There is a great demand for energy-efficient solutions for managing the data collected with the help of sensors. These operations are exclusively focused on non-traditional programming approaches and depend on machine learning techniques, which are part of AI. There are multiple issues that AI needs to resolve for us to achieve a reliable and safe driverless technology. The purpose of this book is to find effective solutions to make autonomous vehicles a reality, presenting their challenges and endeavors. The major contribution of this book is to provide a bundle of AI solutions for driverless technology that can offer a safe, clean, and more convenient riskless mode of transportation.

Download or read book Self Driving Car written by Fouad Sabry and published by One Billion Knowledgeable. This book was released on 2024-05-06 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: What is Self Driving Car A self-driving car, also known as an autonomous car (AC), driverless car, robotaxi, robotic car or robo-car, is a car that is capable of operating with reduced or no human input. Self-driving cars are responsible for all driving activities, such as perceiving the environment, monitoring important systems, and controlling the vehicle, which includes navigating from origin to destination. How you will benefit (I) Insights, and validations about the following topics: Chapter 1: Self-driving car Chapter 2: Advanced driver-assistance system Chapter 3: Vehicular automation Chapter 4: Automatic parking Chapter 5: Waymo Chapter 6: Mobileye Chapter 7: History of self-driving cars Chapter 8: Tesla Autopilot Chapter 9: Cruise (autonomous vehicle) Chapter 10: Regulation of self-driving cars (II) Answering the public top questions about self driving car. (III) Real world examples for the usage of self driving car in many fields. Who this book is for Professionals, undergraduate and graduate students, enthusiasts, hobbyists, and those who want to go beyond basic knowledge or information for any kind of Self Driving Car.

Download or read book Multi sensor Fusion for Autonomous Driving written by Xinyu Zhang and published by Springer Nature. This book was released on with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Autonomous Driving Perception written by Rui Fan and published by Springer Nature. This book was released on 2023-10-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the captivating world of computer vision and deep learning for autonomous driving with our comprehensive and in-depth guide. Immerse yourself in an in-depth exploration of cutting-edge topics, carefully crafted to engage tertiary students and ignite the curiosity of researchers and professionals in the field. From fundamental principles to practical applications, this comprehensive guide offers a gentle introduction, expert evaluations of state-of-the-art methods, and inspiring research directions. With a broad range of topics covered, it is also an invaluable resource for university programs offering computer vision and deep learning courses. This book provides clear and simplified algorithm descriptions, making it easy for beginners to understand the complex concepts. We also include carefully selected problems and examples to help reinforce your learning. Don't miss out on this essential guide to computer vision and deep learning for autonomous driving.

Download or read book Autonomous Vehicle Technology written by James M. Anderson and published by Rand Corporation. This book was released on 2014-01-10 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry appears close to substantial change engendered by “self-driving” technologies. This technology offers the possibility of significant benefits to social welfare—saving lives; reducing crashes, congestion, fuel consumption, and pollution; increasing mobility for the disabled; and ultimately improving land use. This report is intended as a guide for state and federal policymakers on the many issues that this technology raises.

Download or read book Sensing and Control for Autonomous Vehicles written by Thor I. Fossen and published by Springer. This book was released on 2017-05-26 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume includes thoroughly collected on sensing and control for autonomous vehicles. Guidance, navigation and motion control systems for autonomous vehicles are increasingly important in land-based, marine and aerial operations. Autonomous underwater vehicles may be used for pipeline inspection, light intervention work, underwater survey and collection of oceanographic/biological data. Autonomous unmanned aerial systems can be used in a large number of applications such as inspection, monitoring, data collection, surveillance, etc. At present, vehicles operate with limited autonomy and a minimum of intelligence. There is a growing interest for cooperative and coordinated multi-vehicle systems, real-time re-planning, robust autonomous navigation systems and robust autonomous control of vehicles. Unmanned vehicles with high levels of autonomy may be used for safe and efficient collection of environmental data, for assimilation of climate and environmental models and to complement global satellite systems. The target audience primarily comprises research experts in the field of control theory, but the book may also be beneficial for graduate students.