Download or read book Ceramic Catalysts written by Manju Kurian and published by Elsevier. This book was released on 2023-04-27 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic Catalysts: Materials, Strategies and Applications focuses on synthesis techniques and applications of ceramic materials in heterogenous catalysis. In order to enable an affordable, sustainable, low-carbon economy, research activities have been intensified in this area over recent years. The rapid accumulation of results has been evaluated and summarized by recognized experts working in their respective fields in the form of separate and complementary chapters. The first part of the book is dedicated to synthesis and catalytic applications of different categories of ceramics that include both porous ceramics and ceramic composites. Catalytic applications of ceramics mainly involving waste-water treatment, combustion reactions, and fine chemical synthesis are also discussed. Use of ceramics as catalyst supports is also given importance in the book. The book is intended to act as a valuable reference resource for both researchers and postgraduate students with key emphasis on the following areas of research: Recent techniques for the synthesis of different ceramics; specific characteristics of each type of ceramics for catalytic applications; different types of catalyzed reactions based on inherent chemical characteristics and sustainable technologies based on ceramic catalysts.The book will be an essential reference resource for industrial and academic researchers, materials scientists, chemists, and environmental scientists. - Provides an extensive overview of ceramic materials involved in catalysis - Presents the current state of art as tremendous progress has been achieved over recent years - Contributors are at the forefront of research - Provides an evaluation and comparison of the different types of ceramic materials available, including structure, properties and performance
Download or read book Clay Mineral Catalysis of Organic Reactions written by Benny K.G Theng and published by CRC Press. This book was released on 2018-07-27 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides insight into the working of clays and clay minerals in speeding up a variety of organic reactions. Clay minerals are known to have a large propensity for taking up organic molecules and can catalyse numerous organic reactions due to fine particle size, extensive surface area, layer structure, and peculiar charge characteristics. They can be used as heterogeneous catalysts and catalyst carriers of organic reactions because they are non-corrosive, easy to separate from the reaction mixture, and reusable. Clays and clay minerals have an advantage over other solid acids as they are abundant, inexpensive, and non-polluting.
Download or read book Advanced Ceramics written by Shadia Jamil Ikhmayies and published by Springer Nature. This book was released on 2023-11-10 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the fundamentals of advanced ceramics, their stages of development, types and classifications, advanced processing techniques, properties, sintering, and new forms of applications. It highlights specific examples such as alumina, zirconia, Mg-Al-spinels, silicon carbide, silicon nitride, ceramic composites, and thin films with their specific applications. The book reviews progress in perovskite ceramics, in which the synthesis, processing, characterization, and advanced applications of perovskite ceramics are all thoroughly discussed. In addition, developments of perovskite solar cells, the main factors affecting their stability, current problems, development prospects in the research, and application of perovskite solar cells are all highlighted. This book also includes a review of a particular class of rare-earth-based mixed-metal oxides, namely Ln2B2O7 nanostructures (B = Zr, Sn, and Ce), where advantages and disadvantages of each production technique are addressed along with the properties of as-produced nanostructures. The solar photocatalytic uses of Ln2B2O7 nanostructures such as photodegradation of contaminants are also discussed. Yttria-based transparent ceramics for photonic applications are reviewed, along with a discussion of powder synthesis, green body preparation, sintering, and optical properties. In addition, the fundamentals of electrophoretic deposition of hydroxyapatite incorporated composite coatings on metallic substrates are presented and discussed. The different types of ceramics-based self-healing coatings and their fabrication processes have also been reported and discussed in this book. These include titania, zirconia, titanium-alumina, and zirconia-alumina incorporated with Benzotriazole (BTA) as an inhibitor. Advanced ceramic materials that have been used for the purpose of wastewater treatment including ceramic sorbents, resins, aerosols, and ceramic membranes that have been widely used for wastewater treatment purposes are also discussed in depth. Moreover, the book presents the preparation of geopolymers by microwave treatments and explains how their properties can be tuned using microwaves. Furthermore, the future and perspective of these advanced ceramic materials and their modifications to ensure better efficacy toward environmental remediation purposes are highlighted in this book.
Download or read book Structured Catalysts and Reactors written by Andrzej Cybulski and published by CRC Press. This book was released on 2005-11-02 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in structured catalysts is steadily increasing due to the already proven, as well as potential, advantages of these catalysts. Updating the comprehensive coverage of the first edition published in 1998 with the latest science and applications, Structured Catalysts and Reactors, Second Edition gives detailed information on all aspect
Download or read book Experimental Methods for Evaluation of Hydrotreating Catalysts written by Jorge Ancheyta and published by John Wiley & Sons. This book was released on 2020-06-08 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents detailed information and study cases on experiments on hydrotreating catalysts for the petroleum industry Catalytic hydrotreating (HDT) is a process used in the petroleum refining industry for upgrading hydrocarbon streams—removing impurities, eliminating metals, converting asphaltene molecules, and hydrocracking heavy fractions. The major applications of HDT in refinery operations include feed pretreatment for conversion processes, post-hydrotreating distillates, and upgrading heavy crude oils. Designing HDT processes and catalysts for successful commercial application requires experimental studies based on appropriate methodologies. Experimental Methods for Evaluation of Hydrotreating Catalysts provides detailed descriptions of experiments in different reaction scales for studying the hydrotreating of various petroleum distillates. Emphasizing step-by-step methodologies in each level of experimentation, this comprehensive volume presents numerous examples of evaluation methods, operating conditions, reactor and catalyst types, and process configurations. In-depth chapters describe experimental setup and procedure, analytical methods, calculations, testing and characterization of catalyst and liquid products, and interpretation of experiment data and results. The text describes experimental procedure at different levels of experimentation—glass reactor, batch reactor, continuous stirred tank reactor, and multiple scales of tubular reactors—using model compounds, middle distillates and heavy oil. This authoritative volume: Introduces experimental setups used for conducting research studies, such as type of operation, selection of reactor, and analysis of products Features examples focused on the evaluation of different reaction parameters and catalysts with a variety of petroleum feedstocks Provides experimental data collected from different reaction scales Includes experiments for determining mass transfer limitations and deviation from ideality of flow pattern Presents contributions from leading scientists and researchers in the field of petroleum refining Experimental Methods for Evaluation of Hydrotreating Catalysts is an indispensable reference for researchers and professionals working in the area of catalytic hydrotreating, as well as an ideal textbook for courses in fields such as chemical engineering, petrochemical engineering, and biotechnology.
Download or read book Preparation of Catalysts VII written by R. Maggi and published by Elsevier. This book was released on 1998-08-17 with total page 1007 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the VIIth International Symposium on the Scientific Bases for the Preparation of Heterogeneous Catalysts, are in line with the general scope of this series of events. Emphasis in all Symposia has been on the scientific aspects of the preparation of new and industrial catalysts, or on new methods of preparation, rather than on the catalytic reactions in which such solids are ultimately used. In the present context, the catalytic event itself has only been considered as another, though often decisive, method of catalyst characterization.
Download or read book Catalysis written by B. Viswanathan and published by CRC Press. This book was released on 2002 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Students contemplating careers in chemistry, whether in research, practice, or academia, obviously need a solid grounding in proper research methodology, reasoning, and analysis. However, there are few resources available that efficiently and effectively introduce these concepts and techniques and inspire students to undertake advanced research, particularly in the area of catalysis. Catalysis: Principles and Applications evolved out of a special, resoundingly successful short course for graduate students interested in catalysis. It covers nearly the entire gamut of the subject, from its fundamentals to its modern, applied aspects. The chapters were contributed by catalysis specialists from leading academic institutions, national laboratories and industrial R&D labs. Because they are based on the authors' lecture notes, each chapter is highly accessible and for the most part self-contained. Topics include various spectroscopic methods, biocatalysis, x-ray and thermal analysis, photocatalysis, and recent developments, such as solid acid catalysts, fine chemical synthesis, and computer-aided catalyst design. The book also contains discussions on a variety of modern applications, including environmental pollution control, petroleum refining, fuel cells, and monomolecular films. Logically presented, well-illustrated, and thoroughly referenced, Catalysis: Principles and Applications offers an outstanding basis for courses in catalysis. It not only imparts the fundamentals, synthesis, characterization, and applications of catalysis, but does so in a way that will motivate students to pursue more advanced studies and ultimately careers in the field.
Download or read book Preparation of Catalysts VI written by G. Poncelet and published by Elsevier. This book was released on 1995-03-24 with total page 1205 pages. Available in PDF, EPUB and Kindle. Book excerpt: The organizers of this Sixth Symposium maintained their initial objectives, namely to gather experts from both industries and universities to discuss the scientific problems involved in the preparation of heterogeneous catalysts, and to encourage as much as possible the presentation of research work on catalysts of real industrial significance. Another highlight of these symposia is to reserve a substantial part of the program to new developments in catalyst preparation, new preparation methods and new catalytic systems. The fact that chemical reactions which were hardly conceivable some years ago have become possible today through the development of appropriate catalytic systems proves that catalysis is in constant progress.The papers in this volume deal with preparation of new catalysts and supports, catalyst preparation via sol-gel methods, supported catalysts and synthesis of nanometer size catalysts.
Download or read book Scientific Bases for the Preparation of Heterogeneous Catalysts written by E. Gaigneaux and published by Elsevier. This book was released on 2010-06-29 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: These meetings, held every four years, bring together researchers from academia and industry and offer a forum for discussions on the chemistry involved in the preparation of industrial heterogeneous catalysts. Contributions focus on the aspects of catalyst preparation. Reports on physico-chemical characteristics of catalysts and catalytic performances are limited to correlations with the preparation parameters. - Contains a collection of the papers presented at the workshop
Download or read book Catalysis written by James J Spivey and published by Royal Society of Chemistry. This book was released on 2024-03-27 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Looking at modern approaches to catalysis, this volume reviews the extensive literature published on this area. Chapter highlights include Fenton chemistry, advanced manufacturing in heterogeneous catalysis, membrane reactors for light alkane dehydrogenation, and new insights and enhancement of biocatalysts for biomass conversion in the bioproducts industry. Appealing to researchers in academia and industry, the detailed chapters bridge the gap from academic studies in the laboratory to practical applications in industry, not only for the catalysis field, but also for environmental protection. The book will be of great benefit to any researcher wanting a succinct reference on developments in this area now and looking to the future.
Download or read book Engineering Catalysis written by Dmitry Yu. Murzin and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-02-10 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea of this book is to tackle various aspects of heterogeneous catalysis from the engineering point of view and go all the way from engineering of catalysis, catalyst preparation, characterization, reaction kinetics and mass transfer to catalytic reactors and the implementation of catalysts in chemical technology. Aimed for graduate students it is also a useful resource for professionals working in research & development.
Download or read book Preparation of Catalysts III written by G. Poncelet and published by Elsevier. This book was released on 1983-04-01 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studies in Surface Science and Catalysis is one of the oldest and most cited series in the field. It offers a privileged view of the topic covering the theory, applications and engineering of all topics of catalysis, including Heterogeneous-Homogeneous, Biocatalysis and Catalysis for Polymerization. This volume provides an invaluable source of information for academics and industrialists as well as graduate students.
Download or read book Catalyst Deactivation 1980 International Symposium Proceedings written by B. Delmon and published by Elsevier. This book was released on 2000-04-01 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalyst Deactivation 1980: International Symposium Proceedings
Download or read book The Chemistry Physics of Clays and Other Ceramic Materials written by Alfred Broadhead Searle and published by . This book was released on 1924 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Advanced Ceramics written by and published by Academic Press. This book was released on 2013-04-11 with total page 1259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new handbook will be an essential resource for ceramicists. It includes contributions from leading researchers around the world and includes sections on Basic Science of Advanced Ceramics, Functional Ceramics (electro-ceramics and optoelectro-ceramics) and engineering ceramics. - Contributions from more than 50 leading researchers from around the world - Covers basic science of advanced ceramics, functional ceramics (electro-ceramics and optoelectro-ceramics), and engineering ceramics - Approximately 750 illustrations
Download or read book Modern Ceramic Engineering written by David Richerson and published by CRC Press. This book was released on 2005-11-04 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic materials have proven increasingly important in industry and in the fields of electronics, communications, optics, transportation, medicine, energy conversion and pollution control, aerospace, construction, and recreation. Professionals in these fields often require an improved understanding of the specific ceramics materials they are using. Modern Ceramic Engineering, Third Edition helps provide this by introducing the interrelationships between the structure, properties, processing, design concepts, and applications of advanced ceramics. This student-friendly textbook effectively links fundamentals and fabrication requirements to a wide range of interesting engineering application examples. A follow-up to our best-selling second edition, the new edition now includes the latest and most important technological advances in the field. The author emphasizes how ceramics differ from metals and organics and encourages the application of this knowledge for optimal materials selection and design. New topics discuss the definition of ceramics, the combinations of properties fulfilled by ceramics, the evolution of ceramics applications, and their importance in modern civilization. A new chapter provides a well-illustrated review of the latest applications using ceramics and discusses the design requirements that the ceramics must satisfy for each application. The book also updates its chapter on ceramic matrix composites and adds a new section on statistical process control to the chapter on quality assurance. Modern Ceramic Engineering, Third Edition offers a complete and authoritative introduction and reference to the definition, history, structure, processing, and design of ceramics for students and engineers using ceramics in a wide array of industries.
Download or read book Proceedings of the IV Advanced Ceramics and Applications Conference written by Bill Lee and published by Springer. This book was released on 2017-01-16 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the Proceedings of III Advanced Ceramics and Applications conference, held in Belgrade, Serbia in 2014. It contains 25 papers on various subjects regarding preparation, characterization and application of advanced ceramic materials.
