Download or read book Centrifugals Separators and Filters written by United States. Defense Logistics Agency and published by . This book was released on 1978 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solid liquid Separation written by and published by . This book was released on 1991 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Centrifugal Separations in Biotechnology written by Wallace Woon-Fong Leung and published by Butterworth-Heinemann. This book was released on 2020-03-13 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Centrifugal Separations in Biotechnology, Second Edition, is the only book on the market devoted to centrifugal separation in biotechnology. Key topics covered include a full introduction to centrifugation, sedimentation and separation; detailed coverage of centrifuge types, including batch and semi-batch centrifuges, disk-stack and tubular decanter centrifuges; methods for increasing solids concentration; laboratory and pilot testing of centrifuges; selection and sizing centrifuges; scale-up of equipment, performance prediction and analysis of test results using numerical simulation. Centrifugal Separations in Biotechnology, Second Edition, provides guidance on troubleshooting and optimizing centrifuges, and then goes on to explore the commercial applications of centrifuges in biotechnology. It gives detailed process information and data to assist in the development of particular processes from existing systems. It is of value to professionals in the chemical, bioprocess, and biotech sectors, and all those concerned with bioseparation, bioprocessing, unit-operations and process engineering. - Provides a comprehensive guide to centrifuges, their optimal development, and their operation in the biotechnology industry - Updated throughout based on developments in industrial applications and advances in our understanding of centrifugal separations in biotechnology - Discusses applications for the separation of proteins, DNA, mitochondria, ribosomes, lysosomes and other cellular elements - Includes new sections on use of optimal polymer dosage in waste treatment, new centrifuge designs for applications in algae processing, biopharma, and more
Download or read book Filters and Filtration Handbook written by Kenneth S Sutherland and published by Elsevier. This book was released on 2011-04-18 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filters are used in most industries, especially the water, sewage, oil, gas, food and beverage, and pharmaceutical industries. The new edition of this established title is an all-encompassing practical account of standard filtration equipment and its applications. Completely revised and rewritten, it is an essential book for the engineer working in a plant situation-who requires guidance and information on what's available and whether it's suitable for the job. Co-published with the Institution of Chemical Engineers. Co-published with the Institution of Chemical Engineers. - The leading practical engineering guide to filtration techniques, systems and their applications - Meets the needs of all key sectors where filtration is a critical process, including chemical processing and manufacture, food, oil and gas, air-conditioning and water - A comprehensive sourcebook and reference for plant engineers, process engineers, plant designers, filter media and filtration specialists and equipment specifiers
Download or read book Natural Gas Processing written by Alireza Bahadori and published by Gulf Professional Publishing. This book was released on 2014-05-05 with total page 893 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural gas is considered the dominant worldwide bridge between fossil fuels of today and future resources of tomorrow. Thanks to the recent shale boom in North America, natural gas is in a surplus and quickly becoming a major international commodity. Stay current with conventional and now unconventional gas standards and procedures with Natural Gas Processing: Technology and Engineering Design. Covering the entire natural gas process, Bahadori's must-have handbook provides everything you need to know about natural gas, including: - Fundamental background on natural gas properties and single/multiphase flow factors - How to pinpoint equipment selection criteria, such as US and international standards, codes, and critical design considerations - A step-by-step simplification of the major gas processing procedures, like sweetening, dehydration, and sulfur recovery - Detailed explanation on plant engineering and design steps for natural gas projects, helping managers and contractors understand how to schedule, plan, and manage a safe and efficient processing plant - Covers both conventional and unconventional gas resources such as coal bed methane and shale gas - Bridges natural gas processing with basic and advanced engineering design of natural gas projects including real world case studies - Digs deeper with practical equipment sizing calculations for flare systems, safety relief valves, and control valves
Download or read book Gas Liquid And Liquid Liquid Separators written by Maurice Stewart and published by Gulf Professional Publishing. This book was released on 2008-10-02 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas-Liquid And Liquid-Liquid Separators is practical guide designed to help engineers and operators develop a ?feel? for selection, specification, operating parameters, and trouble-shooting separators; form an understanding of the uncertainties and assumptions inherent in operating the equipment. The goal is to help familiarize operators with the knowledge and tools required to understand design flaws and solve everyday operational problems for types of separators. Gas-Liquid And Liquid-Liquid Separators is divided into six parts: Part one and two covers fundamentals such as: physical properties, phase behaviour and calculations. Part three through five is dedicated to topics such as: separator construction, factors affecting separation, vessel operation, and separator operation considerations. Part six is devoted to the ASME codes governing wall thickness determination of vessel weight fabrication, inspection, alteration and repair of separators - 500 illustrations - Easy to understand calculations methods - Guide for protecting downstream equipment - Helps reduce the loss of expensive intermediate ends - Helps increase product purity
Download or read book Fuels and Lubricants Handbook written by and published by ASTM International. This book was released on with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plantwide Control written by Gade Pandu Rangaiah and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of control systems is necessary for safe and optimal operation of industrial processes in the presence of inevitable disturbances and uncertainties. Plant-wide control (PWC) involves the systems and strategies required to control an entire chemical plant consisting of many interacting unit operations. Over the past 30 years, many tools and methodologies have been developed to accommodate increasingly larger and more complex plants. This book provides a state-of-the-art of techniques for the design and evaluation of PWC systems. Various applications taken from chemical, petrochemical, biofuels and mineral processing industries are used to illustrate the use of these approaches. This book contains 20 chapters organized in the following sections: Overview and Industrial Perspective Tools and Heuristics Methodologies Applications Emerging Topics With contributions from the leading researchers and industrial practitioners on PWC design, this book is key reading for researchers, postgraduate students, and process control engineers interested in PWC.
Download or read book Filters and Filtration Handbook written by Trevor Sparks and published by Butterworth-Heinemann. This book was released on 2013-02-08 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filters are used in most industries, especially the water, sewage, oil, gas, food and beverage, and pharmaceutical industries. The new edition of Filters and Filtration Handbook is an all-encompassing practical account of standard filtration equipment and its applications. Completely revised and rewritten, it is an essential book for the engineer working in a plant situation, who requires guidance and information on what’s available and whether it’s suitable for the job. Co-published with the Institution of Chemical Engineers. An up-to-date and comprehensive reference covering essential theory of filters and filtration, and including types of filter, media, filtration, equipment, techniques and systems. Helps you decide the best filtration methods and materials for the task at hand Includes new material on basic principles, filter media and the application of filtration within production systems
Download or read book Ludwig s Applied Process Design for Chemical and Petrochemical Plants written by A. Kayode Coker and published by Elsevier. This book was released on 2011-08-30 with total page 1023 pages. Available in PDF, EPUB and Kindle. Book excerpt: This complete revision of Applied Process Design for Chemical and Petrochemical Plants, Volume 1 builds upon Ernest E. Ludwig's classic text to further enhance its use as a chemical engineering process design manual of methods and proven fundamentals. This new edition includes important supplemental mechanical and related data, nomographs and charts. Also included within are improved techniques and fundamental methodologies, to guide the engineer in designing process equipment and applying chemical processes to properly detailed equipment.All three volumes of Applied Process Design for Chemical and Petrochemical Plants serve the practicing engineer by providing organized design procedures, details on the equipment suitable for application selection, and charts in readily usable form. Process engineers, designers, and operators will find more chemical petrochemical plant design data in:Volume 2, Third Edition, which covers distillation and packed towers as well as material on azeotropes and ideal/non-ideal systems.Volume 3, Third Edition, which covers heat transfer, refrigeration systems, compression surge drums, and mechanical drivers.A. Kayode Coker, is Chairman of Chemical & Process Engineering Technology department at Jubail Industrial College in Saudi Arabia. He's both a chartered scientist and a chartered chemical engineer for more than 15 years. and an author of Fortran Programs for Chemical Process Design, Analysis and Simulation, Gulf Publishing Co., and Modeling of Chemical Kinetics and Reactor Design, Butterworth-Heinemann. - Provides improved design manuals for methods and proven fundamentals of process design with related data and charts - Covers a complete range of basic day-to-day petrochemical operation topics with new material on significant industry changes since 1995.
Download or read book Unit Operations in Food Processing written by R. L. Earle and published by Elsevier. This book was released on 2013-10-22 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This long awaited second edition of a popular textbook has a simple and direct approach to the diversity and complexity of food processing. It explains the principles of operations and illustrates them by individual processes. The new edition has been enlarged to include sections on freezing, drying, psychrometry, and a completely new section on mechanical refrigeration. All the units have been converted to SI measure. Each chapter contains unworked examples to help the student gain a grasp of the subject, and although primarily intended for the student food technologist or process engineer, this book will also be useful to technical workers in the food industry
Download or read book Lubrication Fundamentals Revised and Expanded written by Don M. Pirro and published by CRC Press. This book was released on 2017-07-31 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Careful selection of the right lubricant(s) is required to keep a machine running smoothly. Lubrication Fundamentals, Third Edition, Revised and Expanded describes the need and design for the many specialized oils and greases used to lubricate machine elements and builds on the tribology and lubrication basics discussed in previous editions. Utilizing knowledge from leading experts in the field, the third edition covers new lubrication requirements, crude oil composition and selection, base stock manufacture, lubricant formulation and evaluation, machinery and lubrication fundamentals, and environmental stewardship. The book combines lubrication theory with practical knowledge, and provides many useful illustrations to highlight key industrial, commercial, marine, aviation, and automotive lubricant applications and concepts. All previous edition chapters have been updated to include new technologies, applications, and specifications that have been introduced in the past 15 years. What’s New in the Third Edition: Adds three new chapters on the growing renewable energy application of wind turbines, the impact of lubricants on energy efficiency, and best practice guidelines on establishing an in-service lubricant analysis program Updates API, SAE, and ACEA engine oil specifications, descriptions of new engine oil tests, impact of engine and fuel technology trends on engine oil Includes the latest environmental lubricant tests, definitions, and labelling programs Compiles expert information from ExxonMobil publications and the foremost international equipment builders and industry associations Covers key influences impacting lubricant formulations and technology Offers data on global energy demand and interesting statistics such as the worldwide population of nuclear reactors, wind turbines, and output of hydraulic turbines Presents new sections on the history of synthetic lubricants and hazardous chemical labeling for lubricants Whether used as a training guide for industry novices, a textbook for students to understand lubrication principles, or a technical reference for experienced lubrication and tribology professionals, Lubrication Fundamentals, Third Edition, Revised and Expanded is a "must read" for maintenance professionals, lubricant formulators and marketers, chemists, and lubrication, surface, chemical, mechanical, and automotive engineers.
Download or read book Solid Liquid Filtration and Separation Technology written by Albert Rushton and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: A valuable presentation of theoretical and practical information in the area of liquid-solid filtration. The development of theoretical models is highlighted with practical design data and problem-related examples. Modern trends, e.g., membrane systems, are reported together with the fundamental aspects of particulate technology. The increasing interest in pollution control and environmental protection provides an expansive market for this book. Chemical engineers, chemists, physicists, water treatment/sewage engineers, civil engineers and all those concerned with filtration and pollution will find this book of tremendous value and practical use.
Download or read book Machinery written by Fred Herbert Colvin and published by . This book was released on 1914 with total page 1166 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Process Design and Simulation Aspen Plus and Aspen Hysys Applications written by Juma Haydary and published by John Wiley & Sons. This book was released on 2019-01-16 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and example oriented text for the study of chemical process design and simulation Chemical Process Design and Simulation is an accessible guide that offers information on the most important principles of chemical engineering design and includes illustrative examples of their application that uses simulation software. A comprehensive and practical resource, the text uses both Aspen Plus and Aspen Hysys simulation software. The author describes the basic methodologies for computer aided design and offers a description of the basic steps of process simulation in Aspen Plus and Aspen Hysys. The text reviews the design and simulation of individual simple unit operations that includes a mathematical model of each unit operation such as reactors, separators, and heat exchangers. The author also explores the design of new plants and simulation of existing plants where conventional chemicals and material mixtures with measurable compositions are used. In addition, to aid in comprehension, solutions to examples of real problems are included. The final section covers plant design and simulation of processes using nonconventional components. This important resource: Includes information on the application of both the Aspen Plus and Aspen Hysys software that enables a comparison of the two software systems Combines the basic theoretical principles of chemical process and design with real-world examples Covers both processes with conventional organic chemicals and processes with more complex materials such as solids, oil blends, polymers and electrolytes Presents examples that are solved using a new version of Aspen software, ASPEN One 9 Written for students and academics in the field of process design, Chemical Process Design and Simulation is a practical and accessible guide to the chemical process design and simulation using proven software.
Download or read book Machinery written by Lester Gray French and published by . This book was released on 1917 with total page 1160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machinery written by and published by . This book was released on 1914 with total page 1132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
