Download or read book Central and Eastern United States Seismic Source Characterization for Nuclear Facilities Volume 1 written by U.s. Nuclear Regulatory Commission and published by CreateSpace. This book was released on 2014-01-31 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes a new seismic source characterization (SSC) model for the Central and Eastern United States (CEUS). It will replace the Seismic Hazard Methodology for the Central and Eastern United States, EPRI Report NP-4726 (July 1986) and the Seismic Hazard Characterization of 69 Nuclear Plant Sites East of the Rocky Mountains, Lawrence Livermore National Laboratory Model, (Bernreuter et al., 1989). The objective of the CEUS SSC Project is to develop a new seismic source model for the CEUS using a Senior Seismic Hazard Analysis Committee (SSHAC) Level 3 assessment process. The goal of the SSHAC process is to represent the center, body, and range of technically defensible interpretations of the available data, models, and methods. Input to a probabilistic seismic hazard analysis (PSHA) consists of both seismic source characterization and ground motion characterization. These two components are used to calculate probabilistic hazard results (or seismic hazard curves) at a particular site. This report provides a new seismic source model.

Download or read book Central and Eastern United States Seismic Source Characterization for Nuclear Facilities Volume 3 written by U.s. Nuclear Regulatory Commission and published by CreateSpace. This book was released on 2014-01-31 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes a new seismic source characterization (SSC) model for the Central and Eastern United States (CEUS). It will replace the Seismic Hazard Methodology for the Central and Eastern United States, EPRI Report NP-4726 (July 1986) and the Seismic Hazard Characterization of 69 Nuclear Plant Sites East of the Rocky Mountains, Lawrence Livermore National Laboratory Model, (Bernreuter et al., 1989). The objective of the CEUS SSC Project is to develop a new seismic source model for the CEUS using a Senior Seismic Hazard Analysis Committee (SSHAC) Level 3 assessment process. The goal of the SSHAC process is to represent the center, body, and range of technically defensible interpretations of the available data, models, and methods. Input to a probabilistic seismic hazard analysis (PSHA) consists of both seismic source characterization and ground motion characterization. These two components are used to calculate probabilistic hazard results (or seismic hazard curves) at a particular site. This report provides a new seismic source model.

Download or read book Central and Eastern United States Seismic Source Characterization for Nuclear Facilities electronic Resource written by Kevin J.; United States. Nuclear Regulatory Commission; United States. Department of Energy; Electric Power Research Institute Coppersmith and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Central and Eastern United States Seismic Source Characterization for Nuclear Facilities written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Central and Eastern United States CEUS Seismic Source Characterization SSC for Nuclear Facilities Project written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes a new seismic source characterization (SSC) model for the Central and Eastern United States (CEUS). It will replace the Seismic Hazard Methodology for the Central and Eastern United States, EPRI Report NP-4726 (July 1986) and the Seismic Hazard Characterization of 69 Nuclear Plant Sites East of the Rocky Mountains, Lawrence Livermore National Laboratory Model, (Bernreuter et al., 1989). The objective of the CEUS SSC Project is to develop a new seismic source model for the CEUS using a Senior Seismic Hazard Analysis Committee (SSHAC) Level 3 assessment process. The goal of the SSHAC process is to represent the center, body, and range of technically defensible interpretations of the available data, models, and methods. Input to a probabilistic seismic hazard analysis (PSHA) consists of both seismic source characterization and ground motion characterization. These two components are used to calculate probabilistic hazard results (or seismic hazard curves) at a particular site. This report provides a new seismic source model. Results and Findings The product of this report is a regional CEUS SSC model. This model includes consideration of an updated database, full assessment and incorporation of uncertainties, and the range of diverse technical interpretations from the larger technical community. The SSC model will be widely applicable to the entire CEUS, so this project uses a ground motion model that includes generic variations to allow for a range of representative site conditions (deep soil, shallow soil, hard rock). Hazard and sensitivity calculations were conducted at seven test sites representative of different CEUS hazard environments. Challenges and Objectives The regional CEUS SSC model will be of value to readers who are involved in PSHA work, and who wish to use an updated SSC model. This model is based on a comprehensive and traceable process, in accordance with SSHAC guidelines in NUREG/CR-6372, Recommendations for Probabilistic Seismic Hazard Analysis: Guidance on Uncertainty and Use of Experts. The model will be used to assess the present-day composite distribution for seismic sources along with their characterization in the CEUS and uncertainty. In addition, this model is in a form suitable for use in PSHA evaluations for regulatory activities, such as Early Site Permit (ESPs) and Combined Operating License Applications (COLAs). Applications, Values, and Use Development of a regional CEUS seismic source model will provide value to those who (1) have submitted an ESP or COLA for Nuclear Regulatory Commission (NRC) review before 2011; (2) will submit an ESP or COLA for NRC review after 2011; (3) must respond to safety issues resulting from NRC Generic Issue 199 (GI-199) for existing plants and (4) will prepare PSHAs to meet design and periodic review requirements for current and future nuclear facilities. This work replaces a previous study performed approximately 25 years ago. Since that study was completed, substantial work has been done to improve the understanding of seismic sources and their characterization in the CEUS. Thus, a new regional SSC model provides a consistent, stable basis for computing PSHA for a future time span. Use of a new SSC model reduces the risk of delays in new plant licensing due to more conservative interpretations in the existing and future literature. Perspective The purpose of this study, jointly sponsored by EPRI, the U.S. Department of Energy (DOE), and the NRC was to develop a new CEUS SSC model. The team assembled to accomplish this purpose was composed of distinguished subject matter experts from industry, government, and academia. The resulting model is unique, and because this project has solicited input from the present-day larger technical community, it is not likely that there will be a need for significant revision for a number of years. See also Sponsors Perspective for more details. The goal of this project was to implement the CEUS SSC work plan for developing a regional CEUS SSC model. The work plan, formulated by the project manager and a technical integration team, consists of a series of tasks designed to meet the project objectives. This report was reviewed by a participatory peer review panel (PPRP), sponsor reviewers, the NRC, the U.S. Geological Survey, and other stakeholders. Comments from the PPRP and other reviewers were considered when preparing the report. The SSC model was completed at the end of 2011.

Download or read book Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions written by Francesco Silvestri and published by CRC Press. This book was released on 2019-07-19 with total page 8083 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions contains invited, keynote and theme lectures and regular papers presented at the 7th International Conference on Earthquake Geotechnical Engineering (Rome, Italy, 17-20 June 2019. The contributions deal with recent developments and advancements as well as case histories, field monitoring, experimental characterization, physical and analytical modelling, and applications related to the variety of environmental phenomena induced by earthquakes in soils and their effects on engineered systems interacting with them. The book is divided in the sections below: Invited papers Keynote papers Theme lectures Special Session on Large Scale Testing Special Session on Liquefact Projects Special Session on Lessons learned from recent earthquakes Special Session on the Central Italy earthquake Regular papers Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions provides a significant up-to-date collection of recent experiences and developments, and aims at engineers, geologists and seismologists, consultants, public and private contractors, local national and international authorities, and to all those involved in research and practice related to Earthquake Geotechnical Engineering.

Download or read book Earthquake Engineering Handbook written by Charles Scawthorn and published by CRC Press. This book was released on 2002-09-27 with total page 1508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquakes are nearly unique among natural phenomena - they affect virtually everything within a region, from massive buildings and bridges, down to the furnishings within a home. Successful earthquake engineering therefore requires a broad background in subjects, ranging from the geologic causes and effects of earthquakes to understanding the imp

Download or read book Seismic Analysis of Structures written by T. K. Datta and published by John Wiley & Sons. This book was released on 2010-03-16 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: While numerous books have been written on earthquakes, earthquake resistance design, and seismic analysis and design of structures, none have been tailored for advanced students and practitioners, and those who would like to have most of the important aspects of seismic analysis in one place. With this book, readers will gain proficiencies in the following: fundamentals of seismology that all structural engineers must know; various forms of seismic inputs; different types of seismic analysis like, time and frequency domain analyses, spectral analysis of structures for random ground motion, response spectrum method of analysis; equivalent lateral load analysis as given in earthquake codes; inelastic response analysis and the concept of ductility; ground response analysis and seismic soil structure interaction; seismic reliability analysis of structures; and control of seismic response of structures. Provides comprehensive coverage, from seismology to seismic control Contains useful empirical equations often required in the seismic analysis of structures Outlines explicit steps for seismic analysis of MDOF systems with multi support excitations Works through solved problems to illustrate different concepts Makes use of MATLAB, SAP2000 and ABAQUAS in solving example problems of the book Provides numerous exercise problems to aid understanding of the subject As one of the first books to present such a comprehensive treatment of the topic, Seismic Analysis of Structures is ideal for postgraduates and researchers in Earthquake Engineering, Structural Dynamics, and Geotechnical Earthquake Engineering. Developed for classroom use, the book can also be used for advanced undergraduate students planning for a career or further study in the subject area. The book will also better equip structural engineering consultants and practicing engineers in the use of standard software for seismic analysis of buildings, bridges, dams, and towers. Lecture materials for instructors available at www.wiley.com/go/dattaseismic

Download or read book Seismic Hazard Characterization of the Eastern United States written by and published by . This book was released on 1984 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recent Advances in North American Paleoseismology and Neotectonics East of the Rockies written by Randel Tom Cox and published by Geological Society of America. This book was released on 2012 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This volume focuses on the continental intraplate region of the United States and provides an update and overview of documented Quaternary faulting and paleoseismic liquefaction east of the Rocky Mountains, and of the application of these results to seismic hazard and risk assessments. Contributions include papers that describe zones of newly recognized Quaternary deformation such as the East Tennessee Seismic Zone, as well as reinterpretations of well-known areas such as the New Madrid Seismic Zone. The chapters make important contributions to the recognition of earthquake sources active during the Quaternary and assess the seismic hazards posed by these sources. This volume should interest a wide range of readers from geology, seismology, hazard assessment, and emergency management"--Provided by publisher.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1985 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Publications of the U S Geological Survey 1971 1981 written by and published by . This book was released on 1986 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Federal Register written by and published by . This book was released on 2013-05 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ANALYSIS FOR SOURCE SPECTRA ATTENUATION AND SITE EFFECTS FROM CENTRAL AND EASTERN UNITED STATES EARTHQUAKES NUREG CR 6564 U S NUCLEAR REGULATORY Commission written by and published by . This book was released on 1999* with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book American National Standard written by American Nuclear Society. Standards Committee Working Group ANS-2.27 and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: ANS 2.27-2020 provides criteria and guidelines for conducting geological, seismological, geophysical, and geotechnical investigations needed to provide information to support the following: 1. seismic source characterization input to a probabilistic seismic hazard analysis (PSHA); 2. evaluation of tectonic permanent ground deformation hazard using probabilistic fault displacement hazard analysis for surface-faulting sources and probabilistic tectonic deformation hazard analysis for blind fault sources; 3. site response analysis input to PSHAs; 4. nontectonic, earthquake-induced ground failure hazard; 5. foundation stability.

Download or read book A Multiattribute Utility Analysis of Sites Nominated for Characterization for the First Radioactive waste Repository written by and published by . This book was released on 1986 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Publications of the Geological Survey written by and published by . This book was released on 1971 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: