Download or read book Emerging Technologies and Techniques in Porous Media written by Derek B. Ingham and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat and fluid flow in fluid-saturated porous media has become increas ingly more attractive to researchers and thus it has become a very pro ductive field for many researchers and practical engineers in very diverse range of fields. The great interest in the topic stems from its widespread number of different practical applications in modern industries and in many environmental issues, such as nuclear waste management, build ing thermal insulators, geothermal power plants, grain storage, etc. In building sciences and thermal insulation engineering, an appreciable in sulating effect has been derived by placing porous material in the gap between the cavity walls and multishield structures of nuclear reactors between the pressure vessel and the reactor. Geophysical applications include modeling of the spread of pollutants (e. g. radioactive mater ial), water movements in geothermal reservoirs, enhanced recovery of petroleum reservoirs, etc. These, and many other, important practical applications have resulted in a rapid expansion of research in the general area of porous media and thus generated a vast amount of both theor etical and experimental research work. It has attracted the attention of industrialists, engineers and scientists from many varying disciplines, such as applied mathematics, chemical, civil, environmental, mechanical and nuclear engineering, geothermal physics, food science, medicine, etc. This book contains some of the contributions to the NATO Advanced Study Institute on Emerging Technologies and Techniques in Porous Media that was held in Neptun-Olimp, Constanta, Black Sea, Romania on 9-20 June, 2003.
Download or read book Molecular Simulation on Cementitious Materials From Computational Chemistry Method to Application written by Dongshuai Hou and published by Frontiers Media SA. This book was released on 2022-02-09 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Properties of Cementitious Materials at Microscale written by Ya Wei and published by Springer Nature. This book was released on 2022-11-14 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides information on characterizing the microstructure and mechanical properties of cementitious materials at microscale. Specifically, with the intention to provide the methods of preparing the samples for the micro-scale mechanical testing, to address the techniques for measuring and analyzing the elastic modulus, the stiffness, and the fracture toughness of cementitious materials at micro scale by instrumented indentation, to describe a method for measuring and interpreting creep behavior of cementitious materials at micro scale, and to demonstrate the homogenization method for obtaining the mechanical properties of cementitious materials across scales. The information in this book is helpful to a wide readership in the field of civil engineering and materials science working with cementitious materials and other composite materials.
Download or read book Multi Scale Modeling of Structural Concrete written by Koichi Maekawa and published by CRC Press. This book was released on 2008-11-28 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increases in computer power have now enabled engineers to combine materials science with structural mechanics in the design and the assessment of concrete structures. The techniques developed have become especially useful for the performance assessment of such structures under coupled mechanistic and environmental actions. This allows effective management of infrastructure over a much longer life cycle, thus satisfying the requirements for durability and sustainability. This ground-breaking new book draws on the fields of materials and structural mechanics in an integrated way to address the questions of management and maintenance. It proposes a realistic way of simulating both constituent materials and structural responses under external loading and under ambient conditions. Where the research literature discusses component or element technology related to performance assessment, this book uniquely covers the subject at the level of the whole system including soil foundation, showing engineers how to model changes in concrete structures over time and how to use this for decision making in infrastructure maintenance and asset management.
Download or read book Performance of Cement Based Materials in Aggressive Aqueous Environments written by Mark Alexander and published by Springer Science & Business Media. This book was released on 2012-12-18 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete and cement-based materials must operate in increasingly aggressive aqueous environments, which may be either natural or industrial. These materials may suffer degradation in which ion addition and/or ion exchange reactions occur, leading to a breakdown of the matrix microstructure and consequent weakening. Sometimes this degradation can be extremely rapid and serious such as in acidic environments, while in other cases degradation occurs over long periods. Consequences of material failure are usually severe – adversely affecting the health and well-being of human communities and disturbing ecological balances. There are also large direct costs of maintaining and replacing deteriorated infrastructure and indirect costs from loss of production during maintenance work, which place a great burden on society. The focus of this book is on addressing issues concerning performance of cement-based materials in aggressive aqueous environments , by way of this State-of-the-Art Report. The book represents the work of many well-known and respected authors who contributed chapters or parts of chapters. Four main themes were addressed: I. Nature and kinetics of degradation and deterioration mechanisms of cement-based materials in aggressive aqueous environments, II. Modelling of deterioration in such environments, III. Test methods to assess performance of cement-based materials in such environments, and which can be used to characterise and rate relative performance and inform long term predictions, IV. Engineering implications and consequences of deterioration in aggressive aqueous environments, and engineering approaches to the problem.
Download or read book Computational Modelling of Concrete Structures written by Nenad Bicanic and published by CRC Press. This book was released on 2014-03-04 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: The EURO-C conference series (Split 1984, Zell am See 1990, Innsbruck 1994, Badgastein 1998, St Johann im Pongau 2003, Mayrhofen 2006, Schladming 2010, St Anton am Alberg 2014) brings together researchers and practising engineers concerned with theoretical, algorithmic and validation aspects associated with computational simulations of concrete and
Download or read book Proceedings of the Second Workshop of the HORIZON 2020 CEBAMA Project KIT Scientific Reports 7752 written by Altmaier, M. and published by KIT Scientific Publishing. This book was released on 2019-03-22 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Ageing of Materials and Structures written by Klaas van Breugel and published by Springer. This book was released on 2017-11-23 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is an overview of the state of art on Ageing of Materials and structures in the world. Ageing of materials is a natural phenomenon. Each material we use will age. This ageing will influence the performance of the object where the materials is used. Furthermore, the ageing will be affected by the surroundings in which the object is placed. The main focus of the book is on materials used in infrastructure, energy, buildings and industry. The book in effect establishes the definition of ageing and its main research topics that are relevant for society.
Download or read book Convection in Porous Media written by Donald A. Nield and published by Springer Science & Business Media. This book was released on 2012-11-30 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: Convection in Porous Media, 4th Edition, provides a user-friendly introduction to the subject, covering a wide range of topics, such as fibrous insulation, geological strata, and catalytic reactors. The presentation is self-contained, requiring only routine mathematics and the basic elements of fluid mechanics and heat transfer. The book will be of use not only to researchers and practicing engineers as a review and reference, but also to graduate students and others entering the field. The new edition features approximately 1,750 new references and covers current research in nanofluids, cellular porous materials, strong heterogeneity, pulsating flow, and more.
Download or read book Continuum Models And Discrete Systems Proceedings Of The 9th International Symposium Cmds9 written by Esin Inan and published by World Scientific. This book was released on 1998-12-07 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume deals with continuum theories of discrete mechanical and thermodynamical systems in the fields of mathematics, theoretical and applied mechanics, physics, materials science and engineering.
Download or read book Penetration and Permeability of Concrete written by H.E. Reinhardt and published by CRC Press. This book was released on 2004-06-02 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an investigation into the barrier qualities of concrete. The transport of fluids, in particular organic and contaminating liquids, through concrete can lead to water and soil pollution. This is a world-wide problem on which there is little published material. This state-of-the-art report redresses the balance and sets out current knowl
Download or read book Sustainability of Life Cycle Management for Nuclear Cementation Based Technologies written by Rehab O. Abdel Rahman and published by Woodhead Publishing. This book was released on 2021-05-25 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainability of Life Cycle Management for Nuclear Cementation-Based Technologies, edited by Dr. Rahman and Dr. Ojovan, presents the latest knowledge and research on the management of cementitious systems within nuclear power plants. The book covers aging, development and updates on regulatory frameworks on a global scale, the development of cementitious systems for the immobilization of problematic wastes, and the decommissioning and decontamination of complex cementitious systems. The book's editors and their team of experts combine their practical knowledge to provide the reader with a thorough understanding on the sustainability of lifecycle management of cementitious systems within the nuclear industry. Sections provide a comparative tool that presents national regulations concerning cementitious systems within nuclear power plants, check international and national evaluation results of the sustainability of different systems, help in the development of performance test procedures, and provide a guide on aging nuclear power plants and the long-term behavior of these systems in active and passive safety environments. - Presents the latest information on the behavior of different cementitious systems used in the nuclear industry in one comprehensive resource - Includes scientific justifications of system behavior during the design, operation, maintenance and decommissioning phases - Aids the reader in the development of evaluation tests for problematic wastes
Download or read book Shell Structures Theory and Applications written by Wojciech Pietraszkiewicz and published by CRC Press. This book was released on 2005-09-22 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shells are basic structural elements of modern technology. Examples of shell structures include automobile bodies, domes, water and oil tanks, pipelines, ship hulls, aircraft fuselages, turbine blades, laudspeaker cones, but also balloons, parachutes, biological membranes, a human skin, a bottle of wine or a beer can. This volume contains full texts of over 100 papers presented by specialists from over 20 countries at the 8th Conference "Shell Structures: Theory and Applications", 12-14 October, 2005 in Jurata (Poland). The aim of the meeting was to bring together scientists, designers, engineers and other specialists in shell structures in order to discuss important results and new ideas in this field. The goal is to pursue more accurate theoretical models, to develop more powerful and versatile methods of analysis, and to disseminate expertise in design and maintenance of shell structures. Among the authors there are many distinguished specialists of shell structures, including the authors of general lectures: I.V. Andrianov (Ukraine), V.A. Eremeyev (Russia), A. Ibrahimbegovic (France), P. Klosowski (Poland), B.H. Kröplin (Germany), E. Ramm (Germany), J.M. Rotter (UK) and D. Steigmann (USA). The subject area of the papers covers various theoretical models and numerical analyses of strength, dynamics, stability, optimization etc. of different types of shell structures, their design and maintenance, as well as modelling of some surface-related mechanical phenomena.
Download or read book Computational Modelling of Concrete Structures written by Günther Meschke and published by CRC Press. This book was released on 2018-01-31 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt: The EURO-C conference series (Split 1984, Zell am See 1990, Innsbruck 1994, Badgastein 1998, St. Johann im Pongau 2003, Mayrhofen 2006, Schladming 2010, St. Anton am Arlberg 2014, and Bad Hofgastein 2018) brings together researchers and practising engineers concerned with theoretical, algorithmic and validation aspects associated with computational simulations of concrete and concrete structures. Computational Modelling of Concrete Structures reviews and discusses research advancements and the applicability and robustness of methods and models for reliable analysis of complex concrete, reinforced concrete and pre-stressed concrete structures in engineering practice. The contributions cover both computational mechanics and computational modelling aspects of the analysis and design of concrete and concrete structures: Multi-scale cement and concrete research: experiments and modelling Aging concrete: from very early ages to decades-long durability Advances in material modelling of plain concrete Analysis of reinforced concrete structures Steel-concrete interaction, fibre-reinforced concrete, and masonry Dynamic behaviour: from seismic retrofit to impact simulation Computational Modelling of Concrete Structures is of special interest to academics and researchers in computational concrete mechanics, as well as industry experts in complex nonlinear simulations of concrete structures.
Download or read book Green Building with Concrete written by Gajanan M. Sabnis and published by CRC Press. This book was released on 2015-06-16 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Illustrates the Global Relevance of SustainabilityApplicable to roads, bridges, and other elements of the infrastructure, Green Building with Concrete: Sustainable Design and Construction, Second Edition provides an overview of all available information on the role of concrete in green building. A handbook offering viewpoints from worldwide experts
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1992 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Multi Physics and Multi Scale Couplings in Geo Environmental Mechanics written by Francois Nicot and published by Elsevier. This book was released on 2017-11-20 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Multi-Physics and Multi-Scale Couplings in Geo-Environmental Mechanics reunites some of the most recent work from the French research group MeGe GDR (National Research Group on Multiscale and Multiphysics Couplings in Geo-Environmental Mechanics) on the theme of multi-scale and multi-physics modeling of geomaterials, with a special focus on micromechanical aspects. Its offers readers a glimpse into the current state of scientific knowledge in the field, together with the most up-to-date tools and methods of analysis available. Each chapter represents a study with a different viewpoint, alternating between phenomenological/micro-mechanically enriched and purely micromechanical approaches. Throughout the book, contributing authors will highlight advances in geomaterials modeling, while also pointing out practical implications for engineers. Topics discussed include multi-scale modeling of cohesive-less geomaterials, including multi-physical processes, but also the effects of particle breakage, large deformations on the response of the material at the specimen scale and concrete materials, together with clays as cohesive geomaterials. The book concludes by looking at some engineering problems involving larger scales. - Identifies contributions in the field of geomechanics - Focuses on multi-scale linkages at small scales - Presents numerical simulations by discrete elements and tools of homogenization or change of scale
