Download or read book Cement and Concrete Chemistry written by Wieslaw Kurdowski and published by Springer Science & Business. This book was released on 2014-04-24 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph describes cement clinker formation. It covers multicomponent systems, clinker phase structures and their reactions with water, hydrate composition and structure, as well as their physical properties. The mineral additions to cement are described as are their influence on cement-paste properties. Special cements are also discussed. The microstructure of concrete is then presented, and special emphasis is given to the role of the interfacial transition zone, and the corrosion processes in the light of cement-phase composition, mineral additions and w/c ratio. The admixtures' role in modern concrete technology is described with an emphasis on superplasticizer chemistry and its cement-paste rheological modification mechanism. Cement with atypical properties, such as calcium aluminate, white, low energy and expansive cements are characterized. The last part of the book is devoted to special types of concrete such as self compacting and to reactive powders.
Download or read book Lea s Chemistry of Cement and Concrete written by Peter Hewlett and published by Elsevier. This book was released on 2003-11-12 with total page 1092 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lea's Chemistry of Cement and Concrete deals with the chemical and physical properties of cements and concretes and their relation to the practical problems that arise in manufacture and use. As such it is addressed not only to the chemist and those concerned with the science and technology of silicate materials, but also to those interested in the use of concrete in building and civil engineering construction. Much attention is given to the suitability of materials, to the conditions under which concrete can excel and those where it may deteriorate and to the precautionary or remedial measures that can be adopted. First published in 1935, this is the fourth edition and the first to appear since the death of Sir Frederick Lea, the original author. Over the life of the first three editions, this book has become the authority on its subject. The fourth edition is edited by Professor Peter C. Hewlett, Director of the British Board of Agrement and visiting Industrial Professor in the Department of Civil Engineering at the University of Dundee. Professor Hewlett has brought together a distinguished body of international contributors to produce an edition which is a worthy successor to the previous editions.
Download or read book Cement Chemistry written by H F W Taylor and published by Thomas Telford. This book was released on 1997-04 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: A revised and updated text on cement chemistry. This edition forms a comprehensive and in-depth reference work that explains in detail all aspects of cement chemistry.
Download or read book The Chemistry of Cement and Concrete written by Frederick Measham Lea and published by . This book was released on 1970 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Science and Technology of Concrete Admixtures written by Pierre-Claude Aïtcin and published by Woodhead Publishing. This book was released on 2015-11-12 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science and Technology of Concrete Admixtures presents admixtures from both a theoretical and practical point-of-view. The authors emphasize key concepts that can be used to better understand the working mechanisms of these products by presenting a concise overview on the fundamental behavior of Portland cement and hydraulic binders as well as their chemical admixtures, also discussing recent effects in concrete in terms of rheology, mechanics, durability, and sustainability, but never forgetting the fundamental role played by the water/binder ratio and proper curing in concrete technology. Part One presents basic knowledge on Portland cement and concrete, while Part Two deals with the chemical and physical background needed to better understand what admixtures are chemically, and through which mechanism they modify the properties of the fresh and hardened concrete. Subsequent sections present discussions on admixtures technology and two particular types of concrete, self-consolidating and ultra-high strength concretes, with final remarks on their future. Combines the knowledge of two leading authors to present both the scientific and technology of admixtures Explains what admixtures are from a chemical point-of-view and illustrates by which mechanisms they modify the properties of fresh and hardened concrete Presents a fundamental, practical, and innovative reference book on the topic Contains three detailed appendices that can be used to learn how to use admixtures more efficiently
Download or read book Nonconventional Concrete Technologies written by Committee on Nonconventional Concrete Technologies for Renewal of the Highway Infrastructure and published by National Academies Press. This book was released on 1997-04-08 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonconventional Concrete Technologies: Renewal of the Highway Infrastructure identifies research and development opportunities in innovative, nonconventional materials and processes that have the potential to accelerate the construction process, improve the durability of highway pavement and bridges, and enhance the serviceability and longevity of new construction under adverse conditions.
Download or read book Lea s Chemistry of Cement and Concrete written by Peter Hewlett and published by Butterworth-Heinemann. This book was released on 2019-02-15 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lea's Chemistry of Cement and Concrete, Fifth Edition, examines the suitability and durability of different types of cements and concretes, their manufacturing techniques and the role that aggregates and additives play in achieving concrete's full potential of delivering a high-quality, long-lasting, competitive and sustainable product. Provides a 60% revision over the fourth edition last published in 2004 Includes updated chapters that represent the latest technological advances in the industry, including, but not exclusive to the production of low-energy cements, cement admixtures and concrete aggregates Presents expanded coverage of the suitability and durability of materials aggregates and additives
Download or read book Advances in Cement Technology written by S.N. Ghosh and published by CRC Press. This book was released on 2003-01-01 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the outcome of a critical review of the most important and useful aspects of science and technology of cement. The contents present a combination of cement chemistry including mathematical modelling, manufacture showing geology of limestone and other raw materials, concrete and other blends, instrumental analysis showing thermoanalytical techniques, and x-rays. This publication should be of specific interest to students and researchers, material scientists, cement chemists and technical personnel, and engineers in cement and concrete industry and laboratories.
Download or read book Handbook of Alkali Activated Cements Mortars and Concretes written by Fernando Pacheco-Torgal and published by Elsevier. This book was released on 2014-11-20 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an updated state-of-the-art review on new developments in alkali-activation. The main binder of concrete, Portland cement, represents almost 80% of the total CO2 emissions of concrete which are about 6 to 7% of the Planet’s total CO2 emissions. This is particularly serious in the current context of climate change and it could get even worse because the demand for Portland cement is expected to increase by almost 200% by 2050 from 2010 levels, reaching 6000 million tons/year. Alkali-activated binders represent an alternative to Portland cement having higher durability and a lower CO2 footprint. Reviews the chemistry, mix design, manufacture and properties of alkali-activated cement-based concrete binders Considers performance in adverse environmental conditions. Offers equal emphasis on the science behind the technology and its use in civil engineering.
Download or read book Mineral Admixtures in Cement and Concrete written by Jayant D. Bapat and published by CRC Press. This book was released on 2012-08-06 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written to meet the requirements of engineers working in construction and concrete manufacturing, Mineral Admixtures in Cement and Concrete focuses on how to make more workable and durable concrete using mineral admixtures. In particular, it covers pulverized fuel ash (PFA), blast furnace slag (BFS), silica fume (SF), rice husk ash (RHA), and metakaolin (MK), as well as some new admixtures currently under investigation. For each mineral admixture, the book looks at manufacturing and processing, physical characteristics, chemical and mineralogical composition, quality control, and reported experiences. It also examines the provisions of national standards on the admixture’s addition to cement and concrete. References to microstructures and chemistry are kept to a minimum and only discussed to the extent necessary to help readers apply the admixtures in practice. The book also addresses hydration, presenting the relevant chemistry and detailing the impact of adding mineral admixtures to concrete. A chapter on strength and durability explains the mechanisms, models, and standards related to concrete deterioration and how to mitigate carbonation, alkali-aggregate reactions, chloride attack and corrosion of reinforcement, external and internal sulphate attack, decalcification, and freeze-thaw action. This book is a useful reference for practicing engineers and students alike. It brings together, in one volume, information on the materials, hydration, and the strength and durability of cement and concrete with mineral admixtures. Offering a deeper understanding of mineral admixtures, it encourages engineers to more effectively use these and other wastes in cement and concrete to support more sustainable growth of the cement and construction industry.
Download or read book Cement and Concrete written by M.S.J Gan and published by CRC Press. This book was released on 1997-05-08 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cement and concrete are of great interest to the construction and civil engineering communities. This study provides an appreciation of the complex nature of these materials and a realization that most of the failures involving concrete constructions are preventable.
Download or read book The Chemistry of Cement and Concrete written by Frederick Measham Lea and published by CHEMICAL Publishing Company Incorporated (NY). This book was released on 1971 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: For those interested in the use of concrete in building and civil engineering construction.
Download or read book Concrete Admixtures written by V.H. Dodson and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Practical Guide to Microstructural Analysis of Cementitious Materials written by Karen Scrivener and published by CRC Press. This book was released on 2018-10-09 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Guide from Top-Level Industry Scientists As advanced teaching and training in the development of cementitious materials increase, the need has emerged for an up-to-date practical guide to the field suitable for graduate students and junior and general practitioners. Get the Best Use of Different Techniques and Interpretations of the Results This edited volume provides the cement science community with a state-of-the-art overview of analytical techniques used in cement chemistry to study the hydration and microstructure of cements. Each chapter focuses on a specific technique, not only describing the basic principles behind the technique, but also providing essential, practical details on its application to the study of cement hydration. Each chapter sets out present best practice, and draws attention to the limitations and potential experimental pitfalls of the technique. Databases that supply examples and that support the analysis and interpretation of the experimental results strengthen a very valuable ready reference. Utilizing the day-to-day experience of practical experts in the field, this book: Covers sample preparation issues Discusses commonly used techniques for identifying and quantifying the phases making up cementitious materials (X-ray diffraction and thermogravimetric analysis) Presents good practice oncalorimetry and chemical shrinkage methods for studying cement hydration kinetics Examines two different applications of nuclear magnetic resonance (solid state NMR and proton relaxometry) Takes a look at electron microscopy, the preeminent microstructural characterization technique for cementitious materials Explains how to use and interpret mercury intrusion porosimetry Details techniques for powder characterization of cementitious materials Outlines the practical application of phase diagrams for hydrated cements Avoid common pitfalls by using A Practical Guide to Microstructural Analysis of Cementitious Materials. A one-of-a-kind reference providing the do’s and don’ts of cement chemistry, the book presents the latest research and development of characterisation techniques for cementitious materials, and serves as an invaluable resource for practicing professionals specializing in cement and concrete materials and other areas of cement and concrete technology.
Download or read book Understanding Cement written by Nicholas B. Winter and published by . This book was released on 2012 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Special Inorganic Cements written by Ivan Odler and published by CRC Press. This book was released on 2003-09-02 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only book to cover the use of special inorganic cements instead of standard Portland cement in certain specialist applications, such as oil well drilling or in a high temperature location. Special Inorganic Cements draws together information which is widely scattered in the technical literature. It describes various special cements, their chemistry and mineralogy along with the appropriate manufacturing processes, their hydration and hydration properties, and their applications.
Download or read book Radionuclide and Metal Sorption on Cement and Concrete written by Michael Ochs and published by Springer. This book was released on 2015-10-17 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cementitious materials are being widely used as solidification/stabilisation and barrier materials for a variety of chemical and radioactive wastes, primarily due to their favourable retention properties for metals, radionuclides and other contaminants. The retention properties result from various mineral phases in hydrated cement that possess a high density and diversity of reactive sites for the fixation of contaminants through a variety of sorption and incorporation reactions. This book presents a state of the art review and critical evaluation of the type and magnitude of the various sorption and incorporation processes in hydrated cement systems for twenty-five elements relevant for a broad range of radioactive and industrial wastes. Effects of cement evolution or ageing on sorption/incorporation processes are explicitly evaluated and quantified. While the immobilisation of contaminants by mixing-in during hydration is not explicitly addressed, the underlying chemical processes are similar. A quantitative database on the solid/liquid distribution behaviour of radionuclides and other elements in hydrated cement systems is established on the basis of a consistent review and re-evaluation of literature data. In addition to recommended values, all underlying original experimental data and key experimental info rmation are provided, which allows users to trace the given recommendations or to develop their own set of key values. This database is closely tied to the safety analysis of near surface disposal of radioactive waste in Belgium. It focuses on radioelements, toxic stable elements and heavy metals, which makes it relevant for investigations involving the interaction of radioactive and conventional contaminants with cement-based barriers.
