Download or read book Hydrodynamics of Pumps written by Christopher E. Brennen and published by Cambridge University Press. This book was released on 2011-03-28 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrodynamics of Pumps is a reference for pump experts and a textbook for advanced students. It examines the fluid dynamics of liquid turbomachines, particularly pumps, focusing on special problems and design issues associated with the flow of liquid through a rotating machine. There are two characteristics of a liquid that lead to problems and cause a significantly different set of concerns than those in gas turbines. These are the potential for cavitation and the high density of liquids, which enhances the possibility of damaging, unsteady flows and forces. The book begins with an introduction to the subject, including cavitation, unsteady flows and turbomachinery, basic pump design and performance principles. Chapter topics include flow features, cavitation parameters and inception, bubble dynamics, cavitation effects on pump performance, and unsteady flows and vibration in pumps - discussed in the three final chapters. The book is richly illustrated and includes many practical examples.
Download or read book Cavitation Of Hydraulic Machinery written by Shengcai Li and published by World Scientific. This book was released on 2000-12-27 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume in the Hydraulic Machinery Book series deals with cavitation and its effects in turbines and pumps. After introducing cavitation and its relation with hydraulic machines, the invited contributors throughout the world review in detail relevant cavitation subjects from fundamental phenomena to various problems and solution measures in hydraulic machines. The authors are internationally recognized experts in their fields./a
Download or read book Cavitation of Hydraulic Machinery written by S. C. Li and published by World Scientific. This book was released on 2000 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume in the Hydraulic Machinery Book series deals with cavitation and its effects in turbines and pumps. After introducing cavitation and its relation with hydraulic machines, the invited contributors throughout the world review in detail relevant cavitation subjects from fundamental phenomena to various problems and solution measures in hydraulic machines. The authors are internationally recognized experts in their fields.
Download or read book Fundamentals of Cavitation written by Jean-Pierre Franc and published by Springer Science & Business Media. This book was released on 2006-01-22 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book treats cavitation, which is a unique phenomenon in the field of hyd- dynamics, although it can occur in any hydraulic machinery such as pumps, propellers, artificial hearts, and so forth. Cavitation is generated not only in water, but also in any kind of fluid, such as liquid hydrogen. The generation of cavitation can cause severe damage in hydraulic machinery. Therefore, the prevention of cavitation is an important concern for designers of hydraulic machinery. On the contrary, there is great potential to utilize cavitation in various important applications, such as environmental protection. There have been several books published on cavitation, including one by the same authors. This book differs from those previous ones, in that it is both more physical and more theoretical. Any theoretical explanation of the cavitation phenomenon is rather difficult, but the authors have succeeded in explaining it very well, and a reader can follow the equations easily. It is an advantage in reading this book to have some understanding of the physics of cavitation. Therefore, this book is not an introductory text, but a book for more advanced study. However, this does not mean that this book is too difficult for a beginner, because it explains the cavitation phenomenon using many figures. Therefore, even a beginner on cavitation can read and can understand what cavitation is. If the student studies through this book (with patience), he or she can become an expert on the physics of cavitation.
Download or read book Cavitation written by Yves Lecoffre and published by Routledge. This book was released on 2021-10-08 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text deals with the concept that cavitation is the main limitation to the performance of hydraulic components. Topics covered include the vaporization of liquids due to high velocities or pressure fluctuations, and the effects of cavitation on the performances of rotary machinery. One chapter is devoted to cavitation noise which concerns many users, including surface ships and submarines, and the author finishes with some examples of the use of cavitation and subject-specific measuring techniques.
Download or read book Fluid Vortices written by Sheldon Green and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 905 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid Vortices is a comprehensive, up-to-date, research-level overview covering all salient flows in which fluid vortices play a significant role. The various chapters have been written by specialists from North America, Europe and Asia, making for unsurpassed depth and breadth of coverage. Topics addressed include fundamental vortex flows (mixing layer vortices, vortex rings, wake vortices, vortex stability, etc.), industrial and environmental vortex flows (aero-propulsion system vortices, vortex-structure interaction, atmospheric vortices, computational methods with vortices, etc.), and multiphase vortex flows (free-surface effects, vortex cavitation, and bubble and particle interactions with vortices). The book can also be recommended as an advanced graduate-level supplementary textbook. The first nine chapters of the book are suitable for a one-term course; chapters 10--19 form the basis for a second one-term course.
Download or read book Turbomachinery written by Rama S.R. Gorla and published by CRC Press. This book was released on 2003-08-12 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbomachinery presents the theory and design of turbomachines with step-by-step procedures and worked-out examples. This comprehensive reference emphasizes fundamental principles and construction guidelines for enclosed rotators and contains end-of-chapter problem and solution sets, design formulations, and equations for clear understanding of key aspects in machining function, selection, assembly, and construction. Offering a wide range of illustrative examples, the book evaluates the components of incompressible and compressible fluid flow machines and analyzes the kinematics and dynamics of turbomachines with valuable definitions, diagrams, and dimensionless parameters.
Download or read book Fluid Dynamics of Cavitation and Cavitating Turbopumps written by Luca d'Agostino and published by Springer Science & Business Media. This book was released on 2008-04-20 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on the fluid dynamics of cavitation with special reference to high power density turbopumps, where it represents the major source of performance and life degradation. While covering the more fundamental aspects of cavitation and the main kinds of cavitating flows, there is focus on the hydrodynamics and instabilities of cavitating turbopumps. The book also illustrates the alternative approaches for modeling and engineering simulation of cavitating flows.
Download or read book Sonochemistry and Sonoluminescence written by L.A. Crum and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sonochemistry is studied primarily by chemists and sonoluminescence mainly by physicists, but a single physical phenomenon - acoustic cavitation - unites the two areas. The physics of cavitation bubble collapse, is relatively well understood by acoustical physicists but remains practically unknown to the chemists. By contrast, the chemistry that gives rise to electromagnetic emissions and the acceleration of chemical reactions is familiar to chemists, but practically unknown to acoustical physicists. It is just this knowledge gap that the present volume addresses. The first section of the book addresses the fundamentals of cavitation, leading to a more extensive discussion of the fundamentals of cavitation bubble dynamics in section two. A section on single bubble sonoluminescence follows. The two following sections address the new scientific discipline of sonochemistry, and the volume concludes with a section giving detailed descriptions of the applications of sonochemistry. The mixture of tutorial lectures and detailed research articles means that the book can serve as an introduction as well as a comprehensive and detailed review of these two interesting and topical subjects.
Download or read book International Symposium on Cavitation Noise and Erosion in Fluid Systems 1989 written by William Bruce Morgan and published by American Society of Mechanical Engineers. This book was released on 1969 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1971 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Springer Handbook of Experimental Fluid Mechanics written by Cameron Tropea and published by Springer Science & Business Media. This book was released on 2007-10-09 with total page 1570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accompanying DVD-ROM contains ... "all chapters of the Springer Handbook."--Page 3 of cover.
Download or read book Fluid Mechanics and Thermodynamics of Turbomachinery written by S. Larry Dixon and published by Butterworth-Heinemann. This book was released on 2010-02-17 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbomachinery is a challenging and diverse field, with applications for professionals and students in many subsets of the mechanical engineering discipline, including fluid mechanics, combustion and heat transfer, dynamics and vibrations, as well as structural mechanics and materials engineering. Originally published more than 40 years ago, Fluid Mechanics and Thermodynamics of Turbomachinery is the leading turbomachinery textbook. Used as a core text in senior undergraduate and graduate level courses this book will also appeal to professional engineers in the aerospace, global power, oil & gas and other industries who are involved in the design and operation of turbomachines. For this new edition, author S. Larry Dixon is joined by Cesare Hall from the University of Cambridge, whose diverse background of teaching, research and work experience in the area of turbomachines is well suited to the task of reorganizing and updating this classic text. - Provides the most comprehensive coverage of the fundamentals of turbomachinery of any text in the field - Content has been reorganized to more closely match how instructors currently teach the course, with coverage of fluid mechanics and thermodynamics moved to the front of the book - Includes new design studies of several turbomachines, applying the theories developed in the book
Download or read book Experimental Heat Transfer Fluid Mechanics and Thermodynamics 1993 written by M.D. Kelleher and published by Elsevier. This book was released on 2012-12-02 with total page 1002 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers contained in this volume reflect the ingenuity and originality of experimental work in the areas of fluid mechanics, heat transfer and thermodynamics. The contributors are drawn from 27 countries which indicates how well the worldwide scientific community is networked. The papers cover a broad spectrum from the experimental investigation of complex fundamental physical phenomena to the study of practical devices and applications. A uniform outline and method of presentation has been used for each paper.
Download or read book Theoretical and Applied Mechanics written by P. Germain and published by Elsevier. This book was released on 2012-12-02 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contained in this volume are the full texts of the invited general and sectional lectures presented at this conference. The entire field of mechanics is covered, including analytical, solid and fluid mechanics and their applications. Invited papers on the following topics are also presented: Mechanics of large deformation and damage; The dynamics of two-phase flows; Mechanics of the earth's crust.The papers are written by leading experts and provide a valuable key to the latest and most important developments in various sub-fields of mechanics.
Download or read book Fluid Mechanics and Thermodynamics of Turbomachinery written by Sydney Lawrence Dixon and published by Elsevier. This book was released on 1998 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the intervening 20 years since the 3rd edition of this textbook many advances have been made in the design of turbines and greater understanding of the processes involved have been gained. This 4th edition brings the book up to date.
Download or read book Bulletin written by BHRA (Association) and published by . This book was released on 1966 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
