Download or read book Advanced Experimental and Numerical Techniques for Cavitation Erosion Prediction written by Ki-Han Kim and published by Springer. This book was released on 2014-07-08 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive treatment of the cavitation erosion phenomenon and state-of-the-art research in the field. It is divided into two parts. Part 1 consists of seven chapters, offering a wide range of computational and experimental approaches to cavitation erosion. It includes a general introduction to cavitation and cavitation erosion a detailed description of facilities and measurement techniques commonly used in cavitation erosion studies, an extensive presentation of various stages of cavitation damage (including incubation and mass loss) and insights into the contribution of computational methods to the analysis of both fluid and material behavior. The proposed approach is based on a detailed description of impact loads generated by collapsing cavitation bubbles and a physical analysis of the material response to these loads. Part 2 is devoted to a selection of nine papers presented at the International Workshop on Advanced Experimental and Numerical Techniques for Cavitation Erosion Prediction (Grenoble, France, 1-2 March 2011) representing the forefront of research on cavitation erosion. Innovative numerical and experimental investigations illustrate the most advanced breakthroughs in cavitation erosion research.
Download or read book Advanced Experimental and Numerical Techniques for Cavitation Erosion Prediction written by Ki-Han Kim and published by Springer. This book was released on 2016-09-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive treatment of the cavitation erosion phenomenon and state-of-the-art research in the field. It is divided into two parts. Part 1 consists of seven chapters, offering a wide range of computational and experimental approaches to cavitation erosion. It includes a general introduction to cavitation and cavitation erosion a detailed description of facilities and measurement techniques commonly used in cavitation erosion studies, an extensive presentation of various stages of cavitation damage (including incubation and mass loss) and insights into the contribution of computational methods to the analysis of both fluid and material behavior. The proposed approach is based on a detailed description of impact loads generated by collapsing cavitation bubbles and a physical analysis of the material response to these loads. Part 2 is devoted to a selection of nine papers presented at the International Workshop on Advanced Experimental and Numerical Techniques for Cavitation Erosion Prediction (Grenoble, France, 1-2 March 2011) representing the forefront of research on cavitation erosion. Innovative numerical and experimental investigations illustrate the most advanced breakthroughs in cavitation erosion research.
Download or read book Erosion Wear and Interfaces with Corrosion written by and published by ASTM International. This book was released on 1974 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wear of Materials written by Peter J. Blau and published by Elsevier. This book was released on 2003-10 with total page 1540 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 14th International Conference on Wear of Materials took place in Washington, DC, USA, 30 March - 3 April 2003. These proceedings contain over two-hundred peer reviewed papers containing the best research, technical developments and engineering case studies from around the world. Biomaterials and nano-tribology receive special attention in this collection reflecting the general trends in the field. Further highlights include a focus on the new generation of instrumentation to probe wear at increasingly small scales. Approximately ninety communications and case studies, a popular format for the academic community have also been included, enabling the inclusion of the most up-to-date research. Over 200 peer-reviewed papers including hot topics such as biomaterials and nano-tribology Keeping you up-to-date with the latest research from leading experts Includes communications and case studies
Download or read book Erosion Corrosion An Introduction to Flow Induced Macro Cell Corrosion written by Masanobu Matsumura and published by Bentham Science Publishers. This book was released on 2012 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Erosion-corrosion is a generic name of degradation phenomena which occur on the chemical plant composing metallic materials under the conditions of various flowing liquids. For example, it occurs on heat transfer pipes of seawater heat exchangers (made of"
Download or read book Fundamentals of Cavitation written by Jean-Pierre Franc and published by Springer Science & Business Media. This book was released on 2006-01-22 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book treats cavitation, which is a unique phenomenon in the field of hyd- dynamics, although it can occur in any hydraulic machinery such as pumps, propellers, artificial hearts, and so forth. Cavitation is generated not only in water, but also in any kind of fluid, such as liquid hydrogen. The generation of cavitation can cause severe damage in hydraulic machinery. Therefore, the prevention of cavitation is an important concern for designers of hydraulic machinery. On the contrary, there is great potential to utilize cavitation in various important applications, such as environmental protection. There have been several books published on cavitation, including one by the same authors. This book differs from those previous ones, in that it is both more physical and more theoretical. Any theoretical explanation of the cavitation phenomenon is rather difficult, but the authors have succeeded in explaining it very well, and a reader can follow the equations easily. It is an advantage in reading this book to have some understanding of the physics of cavitation. Therefore, this book is not an introductory text, but a book for more advanced study. However, this does not mean that this book is too difficult for a beginner, because it explains the cavitation phenomenon using many figures. Therefore, even a beginner on cavitation can read and can understand what cavitation is. If the student studies through this book (with patience), he or she can become an expert on the physics of cavitation.
Download or read book Advanced Tribology written by Jianbin Luo and published by Springer Science & Business Media. This book was released on 2010-07-16 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Advanced Tribology" is the proceedings of the 5th China International Symposium on Tribology (held every four years) and the 1st International Tribology Symposium of IFToMM, held in Beijing 24th-27th September 2008. It contains seven parts: lubrication; friction and wear; micro/nano-tribology; tribology of coatings, surface and interface; biotribology; tribo-chemistry; industry tribology. The book reflects the recent progress in the fields such as lubrication, friction and wear, coatings, and precision manufacture etc. in the world. The book is intended for researchers, engineers and graduate students in the field of tribology, lubrication, mechanical production and industrial design. The editors Jianbin Luo, Yonggang Meng, Tianmin Shao and Qian Zhao are all the professors at the State Key Lab of Tribology, Tsinghua University, Beijing.
Download or read book Heat Exchanger Design Handbook written by Kuppan Thulukkanam and published by CRC Press. This book was released on 2000-02-23 with total page 1142 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This comprehensive reference covers all the important aspects of heat exchangers (HEs)--their design and modes of operation--and practical, large-scale applications in process, power, petroleum, transport, air conditioning, refrigeration, cryogenics, heat recovery, energy, and other industries. Reflecting the author's extensive practical experienc
Download or read book Corrosion of Aluminum and Aluminum Alloys written by Joseph R. Davis and published by ASM International. This book was released on 1999-01-01 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Marine Propellers and Propulsion written by John Carlton and published by Elsevier. This book was released on 2011-04-01 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the propeller lies submerged out of sight, it is a complex component in both the hydrodynamic and structural sense. This book fulfils the need for a comprehensive and cutting edge volume that brings together a great range of knowledge on propulsion technology, a multi-disciplinary and international subject. The book comprises three main sections covering hydrodynamics; materials and mechanical considerations; and design, operation and performance. The discussion relates theory to practical problems of design, analysis and operational economy, and is supported by extensive design information, operational detail and tabulated data. Fully updated and revised to cover the latest advances in the field, the new edition now also includes four new chapters on azimuthing and podded propulsors, propeller-rudder interaction, high-speed propellers, and propeller-ice interaction.·The most complete book available on marine propellers, fully updated and revised, with four new chapters on azimuthing and podded propulsors, propeller-rudder interaction, high-speed propellers, and propeller-ice interaction·A valuable reference for marine engineers and naval architects gathering together the subject of propulsion technology, in both theory and practice, over the last forty years ·Written by a leading expert on propeller technology, essential for students of propulsion and hydrodynamics, complete with online worked examples
Download or read book Surface Engineering for Corrosion and Wear Resistance written by J. R. Davis and published by ASM International. This book was released on 2001-01-01 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers are faced with a bewildering array of choices when selecting a surface treatment for a specific corrosion or wear application. This book provides practical information to help them select the best possible treatment. An entire chapter is devoted to process comparisons, and dozens of useful tables and figures compare surface treatment thickness and hardness ranges; abrasion and corrosion resistance; processing time, temperature, and pressure; costs; distortion tendencies; and other critical process factors and coating characteristics. The chapter Practical Guidelines for Surface Engin.
Download or read book Fundamentals of Medium Heavy Duty Diesel Engines written by Gus Wright and published by Jones & Bartlett Publishers. This book was released on 2015-12-16 with total page 1407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the 2014 National Automotive Technicians Education Foundation (NATEF) Medium/Heavy Truck Tasks Lists and ASE Certification Test Series for truck and bus specialists, Fundamentals of Medium/Heavy Duty Diesel Engines is designed to address these and other international training standards. The text offers comprehensive coverage of every NATEF task with clarity and precision in a concise format that ensures student comprehension and encourages critical thinking. Fundamentals of Medium-Heavy Duty Diesel Engines describes safe and effective diagnostic, repair, and maintenance procedures for today’s medium and heavy vehicle diesel engines.
Download or read book Engineering Tribology written by G.W. Stachowiak and published by Butterworth-Heinemann. This book was released on 1993-06-30 with total page 901 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interdisciplinary nature of tribology encompasses knowledge drawn from disciplines such as mechanical engineering, materials science, chemistry and physics. The interaction between these different fields of knowledge to achieve the final result, the control of friction and wear, is reviewed in this volume. This interdisciplinary approach has proven to be a very successful way of analysing friction and wear problems. In many cases tribology is viewed as an inaccessible subject which does not produce useful answers. In this volume the authors redress this problem by providing a comprehensive treatment of the subject. A basic feature of the book is the emphasis on describing various concepts in an accessible manner for the benefit of non-specialists. This principle is applied from the beginning of the book, where the reader is introduced to the fundamental concept of tribology. This concept is then often used to show how the various topics in tribology are interrelated to form one coherent subject. A direct graphical illustration of the mechanisms controlling tribological phenomena is presented. Carefully prepared diagrams allow rapid appreciation of the basic ideas and facts in tribology. The numerical analysis of hydrodynamic lubrication is supported by a number of computer programs which are included in the book. The control of wear is given extensive treatment with a thorough discussion of lubricant additives, solid lubricants and surface coatings. The effectiveness of coatings in suppressing specific forms of wear is analyzed together with the methods of coatings deposition. The book contains 474 figures and 44 tables. More than 1000 references are provided to give the reader access to more specialized information if required. The volume is intended to provide graduates in engineering or materials science with an understanding of the fundamental concepts of friction, wear and lubrication.
Download or read book Manufacturing Engineering written by Vishal S. Sharma and published by Springer Nature. This book was released on 2020-06-02 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises select peer-reviewed contributions from the International Conference on Production and Industrial Engineering (CPIE) 2019. The contents focus on latest research in production and manufacturing engineering including case studies with analytical models and latest numerical approaches. The topics covered include micro, nano, and non-conventional machining, additive manufacturing, casting and forming, joining processes, vibrations and acoustics, materials and processing, product design and development, industrial automation, CAD/CAM and robotics, and sustainability in manufacturing. The book can be useful for students, researchers, and professionals working in manufacturing and production engineering, and other allied fields.
Download or read book The Science of Sailing A complete guide to the physics of sailing and the naval architecture govering the performance of sailing yachts written by Peter van Oossanen and published by Van Oossanen Academy Publishers. This book was released on 2020-01-01 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part 4 of the "Science of Sailing" addresses the phenomena and drag arising from the air-water interface experienced by sailing craft. The topics that are dealt with are wave causation and its consequences on drag, the properties of regular waves in deep and shallow water, the wave pattern generated by the hull of sailing craft, wave drag, interference of wave systems, running trim and sinkage/rise, breaking waves, spray, wind-generated waves and spectra, motions displayed by sailing yachts, wave-added drag, surfing behaviour, cavitation, and ventilation.
Download or read book NASA Technical Paper written by and published by . This book was released on 1984 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sustainable Materials and Manufacturing Technologies written by Navneet Khanna and published by CRC Press. This book was released on 2023-02-27 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials and manufacturing techniques are a few of the vital processes in production industries. Most of the materials processing and manufacturing techniques currently used in industries are a major cause of environmental pollution and are hence unsustainable. This book provides in-depth knowledge about challenges faced during the processing of advanced materials and discusses possible ways to achieve sustainability in manufacturing. This book: Covers advances in cryogenic machining, optimization, and economical and energy assessment of machining Provides case studies and numerical design with analysis using computational fluid dynamics of minimum quantity lubrication mist droplets Reviews metalworking fluids, laser micro-texturing, materials and manufacturing in sustainability, biofuels additives, nano-materials, and additive manufacturing of waste plastic Explores the use of artificial intelligence and machine learning-based manufacturing techniques; and Covers the latest challenges and future trends in sustainable manufacturing Sustainable Materials and Manufacturing Technologies is primarily written for senior undergraduate and graduate students, as well as researchers in mechanical, manufacturing, industrial, and production engineering, and material science.
