Download or read book Materials for High temperature Catalytic Combustion written by and published by . This book was released on 1994 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalytic combustion systems for gas turbines must operate at temperatures of at least 1200°C. Support structure material must retain its integrity under prolonged exposure to high temperature, thermal cycling, and severe chemical conditions; and the material must be capable of being formed into thin sections. The performance requirements of a high-temperature stable ceramic support must be balanced with reasonable costs of preparation. An increasing number of materials have potential for successful exposure to high-temperature conditions. Two major problems of high-temperature catalyst systems are loss of surface area and catalytic activity. Incorporation of the catalytic component into the host lattice can circumvent this problem. Use of supporting active metal oxides on carrier materials with high thermal resistance appears to be a very promising way to make stable catalysts. The challenge will be to provide sufficient low-temperature activity and high-temperature stability; therefore, there exists a need to engineer catalytic materials for high-temperature combustion environments. Developments in catalytic materials and preparation procedures are reviewed. Future areas of research are discussed.
Download or read book Catalytic Materials for High temperature Combustion written by Marco Zwinkels and published by . This book was released on 1991 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials for High temperature Catalytic Combustion written by Anders Ersson and published by . This book was released on 2003 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalyst Materials for High temperature Processes written by K. S. Ramesh and published by . This book was released on 1997 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the April 1996 symposium. Fifteen contributions present a mix of applied science providing an understanding of physical and chemical phenomena that can lead to improved catalyst performance and technology applications, among them, methane reforming, automotive and diesel exhaust catal
Download or read book Nanotemplated High temperature Materials for Catalytic Combustion written by and published by . This book was released on 2008 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Catalytic Combustion written by R.E. Hayes and published by Routledge. This book was released on 2021-10-25 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a clear and concise manner, this book explains how to apply concepts in chemical reaction engineering and transport phenomena to the design of catalytic combustion systems. Although there are many textbooks on the subject of chemical reaction engineering, catalytic combustion is mentioned either only briefly or not at all. The authors have chosen three examples where catalytic combustion is utilized as a primary combustion process and natural gas is used as a fuel - stationary gas turbines, process fluid heaters, and radiant heaters; these cover much of the area where research is currently most active. In each of these there are clear environmental benefits to be gained illustrating catalytic combustion as a "cleaner primary combustion process" . The dominant heat transfer processes in each of the applications are different, as are the support systems, flow geometrics and operating conditions.
Download or read book Materials for High Temperature Catalytic Combustion Presented at the International Workshop on Catalytic Combustion Tokyo Japan 17 20 Apr 1994 International Workshop on Catalytic Combustion Tokyo 17 20 Apr 1994 written by K. S. Ramesh and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structured Catalysts and Reactors written by Andrzej Cybulski and published by CRC Press. This book was released on 2005-11-02 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in structured catalysts is steadily increasing due to the already proven, as well as potential, advantages of these catalysts. Updating the comprehensive coverage of the first edition published in 1998 with the latest science and applications, Structured Catalysts and Reactors, Second Edition gives detailed information on all aspect
Download or read book Heterogeneous Catalytic Materials written by Guido Busca and published by Newnes. This book was released on 2014-05-23 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterogeneous Catalytic Materials discusses experimental methods and the latest developments in three areas of research: heterogeneous catalysis; surface chemistry; and the chemistry of catalysts. Catalytic materials are those solids that allow the chemical reaction to occur efficiently and cost-effectively. This book provides you with all necessary information to synthesize, characterize, and relate the properties of a catalyst to its behavior, enabling you to select the appropriate catalyst for the process and reactor system. Oxides (used both as catalysts and as supports for catalysts), mixed and complex oxides and salts, halides, sulfides, carbides, and unsupported and supported metals are all considered. The book encompasses applications in industrial chemistry, refinery, petrochemistry, biomass conversion, energy production, and environmental protection technologies. - Provides a systematic and clear approach of the synthesis, solid state chemistry and surface chemistry of all solid state catalysts - Covers widely used instrumental techniques for catalyst characterization, such as x-ray photoelectron spectroscopy, scanning electron microscopy, and more - Includes characterization methods and lists all catalytic behavior of the solid state catalysts - Discusses new developments in nanocatalysts and their advantages over conventional catalysts
Download or read book Catalysis written by J. J. Spivey and published by Royal Society of Chemistry. This book was released on 1999 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysis will be of interest to anyone working in academia and industry that needs an up-to-date critical analysis and summary of catalysis research and applications.
Download or read book Catalysis in Theory and Practice written by Sir Eric Keightley Rideal and published by . This book was released on 1919 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Preparation of Catalysts VI written by G. Poncelet and published by Elsevier. This book was released on 1995-03-24 with total page 1205 pages. Available in PDF, EPUB and Kindle. Book excerpt: The organizers of this Sixth Symposium maintained their initial objectives, namely to gather experts from both industries and universities to discuss the scientific problems involved in the preparation of heterogeneous catalysts, and to encourage as much as possible the presentation of research work on catalysts of real industrial significance. Another highlight of these symposia is to reserve a substantial part of the program to new developments in catalyst preparation, new preparation methods and new catalytic systems. The fact that chemical reactions which were hardly conceivable some years ago have become possible today through the development of appropriate catalytic systems proves that catalysis is in constant progress.The papers in this volume deal with preparation of new catalysts and supports, catalyst preparation via sol-gel methods, supported catalysts and synthesis of nanometer size catalysts.
Download or read book Solution Combustion Synthesis Of Nanostructured Solid Catalysts For Sustainable Chemistry written by Sergio Gonzalez-cortes and published by World Scientific. This book was released on 2020-10-23 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term 'green chemistry' was coined by Anastas and Warner in the early 1990s and it is nowadays the mainstay of designing and implementing advanced chemical processes that decrease or eliminate the use and generation of hazardous substances whilst minimizing energy consumption.Solution Combustion Synthesis of Nanostructured Solid Catalysts for Sustainable Chemistry is an interdisciplinary collection of fundamental and applied cutting-edge studies which highlight general and specific aspects of the synthesis of nanostructured catalysts through Solution Combustion Synthesis (SCS), studying their applications from the perspective of green chemistry.This book intends to integrate the fundamental principles of the SCS process with its engineering aspects and covers the synthesis of a wide variety of catalytic materials. This reference book can be used as a permanent consulting material for students, researchers and the general readership for green chemistry, nanochemistry, materials science and chemical engineering.
Download or read book Catalysis in theory and practice written by Eric Keightley Rideal and published by . This book was released on 1919 with total page 924 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles and Methods for Accelerated Catalyst Design and Testing written by E.G. Derouane and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: High throughput experimentation has met great success in drug design but it has, so far, been scarcely used in the field ofcatalysis. We present in this book the outcome of a NATO ASI meeting that was held in Vilamoura, Portugal, between July 15 and 28, 2001, with the objective of delineating and consolidating the principles and methods underpinning accelerated catalyst design, evaluation, and development. There is a need to make the underlying principles of this new methodology more widely understood and to make it available in a coherent and integrated format. The latter objective is particularly important to the young scientists who will constitute the new catalysis researchers generation. Indeed, this field which is at the frontier offundamental science and may be a renaissance for catalysis, is one which is much more complex than classical catalysis itself. It implies a close collaboration between scientists from many disciplines (chemistry, physics, chemical and mechanical engineering, automation, robotics, and scientific computing in general). In addition, this emerging area of science is also of paramount industrial importance, as progress in this area would collapse the time necessary to discover new catalysts or improve existing ones.
Download or read book Catalytic Combustion of Methane with Nanostructured Barium Hexaaluminate based Materials written by Juan Andrey Zarur Jury and published by . This book was released on 1999 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Natural Gas Conversion V written by A. Parmaliana and published by Elsevier. This book was released on 1998-09-17 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: On January 1988, the ascertained and economically accessible reserves of Natural Gas (NG) amounted to over 144,000 billion cubic meters worldwide, corresponding to 124 billion tons of oil equivalents (comparable with the liquid oil reserves, which are estimated to be 138 billion TOE). It is hypothesized that the volume of NG reserve will continue to grow at the same rate of the last decade. Forecasts on production indicate a potential increase from about 2,000 billion cubic meters in 1990 to not more than 3,300 billion cubic meters in 2010, even in a high economic development scenario. NG consumption represents only one half of oil: 1.9 billion TOE/y as compared to 3.5 of oil. Consequently, in the future gas will exceed oil as a carbon atom source. In the future the potential for getting energetic vectors or petrochemicals from NG will continue to grow.The topics covered in Natural Gas Conversion V reflect the large global R&D effort to look for new and economic ways of NG exploitation. These range from the direct conversion of methane and light paraffins to the indirect conversion through synthesis gas to fuels and chemicals. Particularly underlined and visible are the technologies already commercially viable.These proceedings prove that mature and technologically feasible processes for natural gas conversion are already available and that new and improved catalytic approaches are currently developing, the validity and feasibility of which will soon be documented. This is an exciting area of modern catalysis, which will certainly open novel and rewarding perspectives for the chemical, energy and petrochemical industries.
