Download or read book Catalytic Chemical Vapor Deposition written by Hideki Matsumura and published by John Wiley & Sons. This book was released on 2019-08-05 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authoritative reference on catalytic chemical vapor deposition, written by the inventor of the technology. This comprehensive book covers a wide scope of Cat-CVD and related technologies from the fundamentals to the many applications, including the design of a Cat-CVD apparatus. Featuring contributions from four senior leaders in the field, including the father of catalytic chemical vapor deposition, it also introduces some of the techniques used in the observation of Cat-CVD related phenomena so that readers can understand the concepts of such techniques. Catalytic Chemical Vapor Deposition: Technology and Applications of Cat-CVD begins by reviewing the analytical tools for elucidating the chemical reactions in Cat-CVD, such as laser-induced fluorescence and deep ultra-violet absorption, and explains in detail the underlying physics and chemistry of the Cat-CVD technology. Subsequently it provides an overview of the synthesis and properties of Cat-CVD-prepared inorganic and organic thin films. The last parts of this unique book are devoted to the design and operation of Cat-CVD apparatuses and the applications. Provides coherent coverage of the fundamentals and applications of catalytic chemical vapor deposition (Cat-CVD) Assembles in one place the state of the art of this rapidly growing field, allowing new researchers to get an overview that is difficult to obtain solely from journal articles Presents comparisons of different Cat-CVD methods which are usually not found in research papers Bridges academic and industrial research, showing how CVD can be scaled up from the lab to large-scale industrial utilization in the high-tech industry. Catalytic Chemical Vapor Deposition: Technology and Applications is an excellent one-stop resource for researchers and engineers working on or entering the field of Cat-CVD, Hot-Wire CVD, iCVD, and related technologies.
Download or read book Catalytic Chemical Vapor Deposition written by Hideki Matsumura and published by John Wiley & Sons. This book was released on 2019-02-08 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authoritative reference on catalytic chemical vapor deposition, written by the inventor of the technology. This comprehensive book covers a wide scope of Cat-CVD and related technologies from the fundamentals to the many applications, including the design of a Cat-CVD apparatus. Featuring contributions from four senior leaders in the field, including the father of catalytic chemical vapor deposition, it also introduces some of the techniques used in the observation of Cat-CVD related phenomena so that readers can understand the concepts of such techniques. Catalytic Chemical Vapor Deposition: Technology and Applications of Cat-CVD begins by reviewing the analytical tools for elucidating the chemical reactions in Cat-CVD, such as laser-induced fluorescence and deep ultra-violet absorption, and explains in detail the underlying physics and chemistry of the Cat-CVD technology. Subsequently it provides an overview of the synthesis and properties of Cat-CVD-prepared inorganic and organic thin films. The last parts of this unique book are devoted to the design and operation of Cat-CVD apparatuses and the applications. Provides coherent coverage of the fundamentals and applications of catalytic chemical vapor deposition (Cat-CVD) Assembles in one place the state of the art of this rapidly growing field, allowing new researchers to get an overview that is difficult to obtain solely from journal articles Presents comparisons of different Cat-CVD methods which are usually not found in research papers Bridges academic and industrial research, showing how CVD can be scaled up from the lab to large-scale industrial utilization in the high-tech industry. Catalytic Chemical Vapor Deposition: Technology and Applications is an excellent one-stop resource for researchers and engineers working on or entering the field of Cat-CVD, Hot-Wire CVD, iCVD, and related technologies.
Download or read book Synthesis Technology and Applications of Carbon Nanomaterials written by Suraya Abdul Rashid and published by Elsevier. This book was released on 2018-10-10 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesis, Technology and Applications of Carbon Nanomaterials explores the chemical properties of different classes of carbon nanomaterials and their major applications. As carbon nanomaterials are used for a variety of applications due to their versatile properties and characteristics, this book discusses recent advances in synthesis methods, characterization, and applications of 0D -3D dimensional carbon nanomaterials. It is an essential resource for readers focusing on carbon nanomaterials research. - Explores the chemical properties of different classes of carbon nanomaterials and their major applications - Discusses recent advances in synthesis methods, characterization, and applications of 0D -3D dimensional carbon nanomaterials
Download or read book Industrial Catalysis written by Jens Hagen and published by John Wiley & Sons. This book was released on 2015-11-02 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in it's 3rd Edition, Industrial Catalysis offers all relevant information on catalytic processes in industry, including many recent examples. Perfectly suited for self-study, it is the ideal companion for scientists who want to get into the field or refresh existing knowledge. The updated edition covers the full range of industrial aspects, from catalyst development and testing to process examples and catalyst recycling. The book is characterized by its practical relevance, expressed by a selection of over 40 examples of catalytic processes in industry. In addition, new chapters on catalytic processes with renewable materials and polymerization catalysis have been included. Existing chapters have been carefully revised and supported by new subchapters, for example, on metathesis reactions, refinery processes, petrochemistry and new reactor concepts. "I found the book accesible, readable and interesting - both as a refresher and as an introduction to new topics - and a convenient first reference on current industrial catalytic practise and processes." Excerpt from a book review for the second edition by P. C. H. Mitchell, Applied Organometallic Chemistry (2007)
Download or read book Multiphase Flow and Fluidization written by Dimitri Gidaspow and published by Elsevier. This book was released on 2012-12-02 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Useful as a reference for engineers in industry and as an advanced level text for graduate engineering students, Multiphase Flow and Fluidization takes the reader beyond the theoretical to demonstrate how multiphase flow equations can be used to provide applied, practical, predictive solutions to industrial fluidization problems. Written to help advance progress in the emerging science of multiphase flow, this book begins with the development of the conservation laws and moves on through kinetic theory, clarifying many physical concepts (such as particulate viscosity and solids pressure) and introducing the new dependent variable--the volume fraction of the dispersed phase. Exercises at the end of each chapterare provided for further study and lead into applications not covered in the text itself. - Treats fluidization as a branch of transport phenomena - Demonstrates how to do transient, multidimensional simulation of multiphase processes - The first book to apply kinetic theory to flow of particulates - Is the only book to discuss numerical stability of multiphase equations and whether or not such equations are well-posed - Explains the origin of bubbles and the concept of critical granular flow - Presents clearly written exercises at the end of each chapter to facilitate understanding and further study
Download or read book Dynamics and Control of Energy Systems written by Achintya Mukhopadhyay and published by Springer Nature. This book was released on 2019-10-14 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in dynamics and control of different types of energy systems. It covers research on dynamics and control in energy systems from different aspects, namely, combustion, multiphase flow, nuclear, chemical and thermal. The chapters start from the basic concepts so that this book can be useful even for researchers with very little background in the area. A dedicated chapter provides an overview on the fundamental aspects of the dynamical systems approach. The book will be of use to researchers and professionals alike.
Download or read book Chemical Vapor Deposition written by S Neralla and published by BoD – Books on Demand. This book was released on 2016-08-31 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of chemical vapor deposition (CVD) methods and recent advances in developing novel materials for application in various fields. CVD has now evolved into the most widely used technique for growth of thin films in electronics industry. Several books on CVD methods have emerged in the past, and thus the scope of this book goes beyond providing fundamentals of the CVD process. Some of the chapters included highlight current limitations in the CVD methods and offer alternatives in developing coatings through overcoming these limitations.
Download or read book Chemical Vapour Deposition CVD written by Kwang-Leong Choy and published by CRC Press. This book was released on 2019-06-07 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a timely and complete overview on chemical vapour deposition (CVD) and its variants for the processing of nanoparticles, nanowires, nanotubes, nanocomposite coatings, thin and thick films, and composites. Chapters discuss key aspects, from processing, material structure and properties to practical use, cost considerations, versatility, and sustainability. The author presents a comprehensive overview of CVD and its potential in producing high performance, cost-effective nanomaterials and thin and thick films. Features Provides an up-to-date introduction to CVD technology for the fabrication of nanomaterials, nanostructured films, and composite coatings Discusses processing, structure, functionalization, properties, and use in clean energy, engineering, and biomedical grand challenges Covers thin and thick films and composites Compares CVD with other processing techniques in terms of structure/properties, cost, versatility, and sustainability Kwang-Leong Choy is the Director of the UCL Centre for Materials Discovery and Professor of Materials Discovery in the Institute for Materials Discovery at the University College London. She earned her D.Phil. from the University of Oxford, and is the recipient of numerous honors including the Hetherington Prize, Oxford Metallurgical Society Award, and Grunfeld Medal and Prize from the Institute of Materials (UK). She is an elected fellow of the Institute of Materials, Minerals and Mining, and the Royal Society of Chemistry.
Download or read book Catalytic Chemical Vapor Deposition Synthesis of Carbon Nanotubes from Methane on SiO Supported Fe and Fe Ni Catalysts written by Ayako Nakagawa and published by . This book was released on 2009 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Influences of operating conditions on the production of carbon nanotubes (CNTs) were studied using Fe and Fe-Ni bimetallic catalysts supported on silicon monoxide (SiO). The catalysts were prepared in three steps: (1) impregnation of SiO powders with ferric nitride or combinations of ferric and nickel nitrides, (2) oxidation of nitrides in an air stream, and (3) grinding the powders obtained. CNTs were successfully synthesized by catalytic CVD using NH3/CH4 mixtures in a horizontal tubular flow reactor. The following process parameters were varied to investigate their effects on the growth rates of CNTs. The morphologies of catalysts and product CNTs were observed by scanning electron microscope (SEM). The particle size of SiO, metal composition, metal loading, temperature for catalyst oxidation, extent of grinding of catalysts, NH3 pretreatment time, reaction temperature for CNT growth, reaction time, and NH3/CH4 feed ratio. Two different average sizes of SiO particles, 8 [mu]m and 44 [mu]m, were compared based on the growth of CNTs in 5 min. Catalysts supported on 44 [mu]m average sized SiO particles demonstrated higher yields when they were not pretreated in an NH3 stream. When 1 wt% Fe was loaded, aligned CNTs were formed, and a highest growth rate per unit mass of catalyst was observed. The range of oxidation temperature to achieve highest catalyst activities depended on metals and metal contents: 600 - 750°C for 1 wt% Fe, 450 - 600°C for 3 wt% Fe, and 750 - 900°C for Fe-Ni. Grinding catalysts for at least 3 minutes increased the growth rate of CNTs by approximately 40 percent. The growth of CNTs was enhanced when no NH3 pretreatment of catalysts was carried out, regardless of metals and metal contents. However, CNTs did not grow appreciably from methane without ammonia. An NH3/CH4 feed ratio of 0.15 - 0.25 was observed to yield highest growth rates. The reaction temperature to achieve highest CNT growth rates was found to be in the range between 990 and 1000 °C. The growth of CNTs was not linear but decreased with reaction time.
Download or read book Perspective of Carbon Nanotubes written by Hosam El-Din Saleh and published by BoD – Books on Demand. This book was released on 2019-12-11 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes belong to new nanomaterials and have been known for almost 20 years, but their history is somewhat lengthier. They have been identified as promising candidates for various applications.High-temperature preparation techniques are conventional techniques for the synthesis of carbon nanotubes using arc discharge or laser ablation, but today these methods are being replaced by low-temperature vapor deposition techniques, since orientation, alignment, nanotube length, diameter, purity, and density of carbon nanotubes can be precisely controlled. The synthesis of carbon nanotubes by chemical vapor deposition on catalyst arrays leads to nanotube models grown from specific sites on surfaces. The controlled synthesis of nanotubes opens up interesting possibilities in nanoscience and nanotechnologies, including electrical, mechanical and electromechanical properties and devices, chemical functionalization, surface chemistry and photochemistry, molecular sensors, and interfacing with moderate biological systems.Carbon nanotubes are used in many applications due to their unique electrical, mechanical, optical, thermal, and other properties. Conductive and high-strength composite materials, energy saving and energy conversion devices, sensors, visualization of field emissions and sources of radiation, means for storing hydrogen, and nanoscale semiconductor devices, probes, and interconnections are some of the many applications of carbon nanotubes.
Download or read book EUROCVD 15 written by Anjana Devi and published by The Electrochemical Society. This book was released on 2005 with total page 1128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of Chemical Vapor Deposition written by Daniel Dobkin and published by Springer Science & Business Media. This book was released on 2003-04-30 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Chemical Vapor Deposition provides a simple introduction to heat and mass transfer, surface and gas phase chemistry, and plasma discharge characteristics. In addition, the book includes discussions of practical films and reactors to help in the development of better processes and equipment. This book will assist workers new to chemical vapor deposition (CVD) to understand CVD reactors and processes and to comprehend and exploit the literature in the field. The book reviews several disparate fields with which many researchers may have only a passing acquaintance, such as heat and mass transfer, discharge physics, and surface chemistry, focusing on key issues relevant to CVD. The book also examines examples of realistic industrial reactors and processes with simplified analysis to demonstrate how to apply the principles to practical situations. The book does not attempt to exhaustively survey the literature or to intimidate the reader with irrelevant mathematical apparatus. This book is as simple as possible while still retaining the essential physics and chemistry. The book is generously illustrated to assist the reader in forming the mental images which are the basis of understanding.
Download or read book Synthesis of Carbon Nanotubes by Catalytic Chemical Vapor Deposition written by GuiPing Dai and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a new carbon material in the twenty-first century, carbon nanotubes (CNTs) have excellent optical, electrical, magnetic, thermal, chemical, and mechanical properties. There are many synthesis methods to produce CNTs. Compared with other methods, chemical vapor deposition (CVD) is the most effective method that has broad prospects for large-scale control of CNTs in recent years due to its simple equipment, simple operation, and lower cost. In order to gain a comprehensive understanding of the controlling parameters about the formation of CNTs, this chapter reviews the latest progress in the preparation of CNTs by CVD from three of the most important influencing factors: carbon sources, catalysts, and substrates. Among them, the catalyst is the most influential factor for the morphology, structure, and properties of CNTs. It should be pointed out that many growth factors can control the particle size distribution, composition, and structure of the catalysts, such as catalyst substrate, metal transition components added, calcination temperature, etc.
Download or read book Precursor Chemistry of Advanced Materials written by Roland A. Fischer and published by Springer Science & Business Media. This book was released on 2005-09-29 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material synthesis by the transformation of organometallic compounds (precursors) by vapor deposition techniques such as chemical vapor deposition (CVD) and atomic layer deposition (ALD) has been in the forefront of modern day research and development of new materials. There exists a need for new routes for designing and synthesizing new precursors as well as the application of established molecular precursors to derive tuneable materials for technological demands. With regard to the precursor chemistry, a most detailed understanding of the mechanistic complexity of materials formation from molecular precursors is very important for further development of new processes and advanced materials. To emphasize and stimulate research in these areas, this volume comprises a selection of case studies covering various key-aspects of the interplay of precursor chemistry with the process conditions of materials formation, particularly looking at the similarities and differences of CVD, ALD and nanoparticle synthesis, e.g. colloid chemistry, involving tailored molecular precursors.
Download or read book Catalytic Chemical Vapor Deposition written by Hideki Matsumura and published by John Wiley & Sons. This book was released on 2019-02-15 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authoritative reference on catalytic chemical vapor deposition, written by the inventor of the technology. This comprehensive book covers a wide scope of Cat-CVD and related technologies from the fundamentals to the many applications, including the design of a Cat-CVD apparatus. Featuring contributions from four senior leaders in the field, including the father of catalytic chemical vapor deposition, it also introduces some of the techniques used in the observation of Cat-CVD related phenomena so that readers can understand the concepts of such techniques. Catalytic Chemical Vapor Deposition: Technology and Applications of Cat-CVD begins by reviewing the analytical tools for elucidating the chemical reactions in Cat-CVD, such as laser-induced fluorescence and deep ultra-violet absorption, and explains in detail the underlying physics and chemistry of the Cat-CVD technology. Subsequently it provides an overview of the synthesis and properties of Cat-CVD-prepared inorganic and organic thin films. The last parts of this unique book are devoted to the design and operation of Cat-CVD apparatuses and the applications. Provides coherent coverage of the fundamentals and applications of catalytic chemical vapor deposition (Cat-CVD) Assembles in one place the state of the art of this rapidly growing field, allowing new researchers to get an overview that is difficult to obtain solely from journal articles Presents comparisons of different Cat-CVD methods which are usually not found in research papers Bridges academic and industrial research, showing how CVD can be scaled up from the lab to large-scale industrial utilization in the high-tech industry. Catalytic Chemical Vapor Deposition: Technology and Applications is an excellent one-stop resource for researchers and engineers working on or entering the field of Cat-CVD, Hot-Wire CVD, iCVD, and related technologies.
Download or read book Aligned Carbon Nanotubes written by Zhifeng Ren and published by Springer Science & Business Media. This book was released on 2012-09-05 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a survey of the physics and fabrication of carbon nanotubes and their applications in optics, electronics, chemistry and biotechnology. It focuses on the structural characterization of various carbon nanotubes, fabrication of vertically or parallel aligned carbon nanotubes on substrates or in composites, physical properties for their alignment, and applications of aligned carbon nanotubes in field emission, optical antennas, light transmission, solar cells, chemical devices, bio-devices, and many others. Major fabrication methods are illustrated in detail, particularly the most widely used PECVD growth technique on which various device integration schemes are based, followed by applications such as electrical interconnects, nanodiodes, optical antennas, and nanocoax solar cells, whereas current limitations and challenges are also be discussed to lay the foundation for future developments.
Download or read book Carbon Nanotubes and Related Structures written by Peter John Frederich Harris and published by Cambridge University Press. This book was released on 2001-10-18 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a 1999 book on carbon nanotubes, one of the most exciting areas in materials chemistry.
