Download or read book Regeneration of Spent Catalyst and Impregnation of Catalyst by Supercritical Fluid written by Farid Gumerov and published by Nova Science Publishers. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A catalyst is a material of constant composition, which accelerates the rate of a chemical reaction by providing a suitable reaction pathway with the lowest activation energy. As the activation energy is lower, more reaction products are formed in the same period of time. Most catalytic reactions encountered in hydrocarbon processing are carried out with porous catalysts to provide a sufficient surface area for the metal dispersion and the ensuing reaction. These catalysts gradually lose their catalytic activity, usually through structural changes, poisoning, or the deposit of extraneous material. A catalyst which can no longer exhibit the necessary activity and/or is specificity required by the user is referred to as a "spent catalyst". Catalysts are critical to the chemical industry and are now used in most industrial chemical processes. Along with the rapid development and wide application of catalysis technology, the amounts of different spent catalysts are increased from year to year. The physical properties of spent catalysts, as well as their composition, are generally different from those of fresh catalysts. For example, spent hydrotreating catalysts contain metal sulfides and coke, and may have additional contaminants that were not present in the fresh catalyst. Catalyst regeneration involves the processing of spent catalysts in order to make them reusable. This is done by restoring the initial properties of spent catalysts and thus restoring their efficiency through a process called regeneration of catalysts. Traditional methods of vapor-air regeneration are energy-consuming and severely limit the number of regeneration cycles. Using supercritical fluid CO2-extraction process, according to some estimates, provides a two-fold energy savings and an increasing number of regeneration cycles possible. This book gathers a series of studies describing new methods for the regeneration of heterogeneous catalysts for important industrial chemical processes. In this book we propose new extraction techniques using supercritical fluid extraction (SFC), which seems to be one of the most promising as a green reaction medium. The feasibility of using supercritical fluid СО2 extraction process was investigated in particular for spent catalyst regeneration. The low regeneration temperature of supercritical carbon dioxide eliminates the risk of thermal deterioration of the catalyst (namely the collapse of the pores), prevents the reduction of the surface area and the sintering, and allows regeneration of catalysts with an activity close to that of fresh catalysts. The results of the implementation of the supercritical fluid СО2 extraction process with respect to samples of industrial deactivated catalysts are provided. A comparison of the characteristics of the regenerated catalyst samples by traditional approaches and the SC-CO2 extraction process is carried out. The possibility of using a supercritical fluid CO2 impregnation technique in the synthesis of a palladium catalyst is also studied.
Download or read book Handbook of Spent Hydroprocessing Catalysts written by Meena Marafi and published by Elsevier. This book was released on 2010-06-07 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook serves scientists and researchers interested in any aspect of spent hydroprocessing catalysts. Its aim is to assist in the analysis and assessment of refined catalyst byproducts and processing options, to determine whether spent catalysts can be processed into productive resources. For non-regenerable spent catalysts, the book takes into consideration both safety and ecological implications of utilizing landfill and other waste options. - Provides comprehensive guidance and assistance to those making decisions on the fate of spent catalysts, radically improving strategic options for refining organisations - Offers solutions that maximize procedural, regulatory, safety, and preparedness benefits - Contains detailed information on hazardous characteristics of spent and regenerated catalysts with deployment recommendations, and acts as a benchmark document for establishing threshold limits of regulated species as well as for developing procedures for handling spent catalysts to ensure environmental acceptance
Download or read book Handbook of Spent Hydroprocessing Catalysts written by Meena Marafi and published by Elsevier. This book was released on 2017-01-18 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Spent Hydroprocessing Catalysts, Second Edition, covers all aspects of spent hydroprocessing catalysts, both regenerable and non-regenerable. It contains detailed information on hazardous characteristics of spent and regenerated catalysts. The information forms a basis for determining processing options to make decisions on whether spent catalysts can be either reused on refinery site after regeneration or used as the source of new materials. For non-regenerable spent catalysts, attention is paid to safety and ecological implications of utilizing landfill and other waste handling and storage options to ensure environmental acceptance. As such, this handbook can be used as a benchmark document to develop threshold limits of regulated species. - Includes experimental results and testing protocols which serve as a basis for the development of methodologies for the characterization of solid wastes - Presents a database which assists researchers in selecting/designing research projects on spent catalysts, i.e., regeneration vs. rejuvenation and metal reclamation - Provides the environmental laws, acts, and liabilities to raise awareness in safety and health issues in all aspects of spent catalysts - Contains solid waste management procedures specific to hydroprocessing that serve as a model for designing research projects in other solid waste areas
Download or read book Hydrocracking Science and Technology written by Julius Scherzer and published by CRC Press. This book was released on 1996-08-06 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents advances in the field of hydrocracking. The volume includes catalytic materials, reaction mechanisms and pathways, as well as hydrocracking processes and applications. It discusses hydrocracking processes and hydrocracking technology in catalytic dewaxing, resid upgrading, and fluid catalytic cracking feedstock improvement
Download or read book Advances in Catalyst Deactivation written by Calvin H. Bartholomew and published by MDPI. This book was released on 2018-10-01 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Advances in Catalyst Deactivation" that was published in Catalysts
Download or read book Catalytic Naphtha Reforming Revised and Expanded written by George J. Antos and published by CRC Press. This book was released on 2004-02-23 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalytic Naphtha Reforming, Second Edition presents modern, crystal-clear explanations of every aspect of this critical process for generating high-octane reformate products for gasoline blending and production of benzene, toluene, and xylene (BTX) aromatics. The book details the chemistry of naphtha reforming, the preparation and characterization of catalysts, and the very latest commercial technologies and industrial applications. With more than 300 tables and figures, it addresses the development of new catalysts and revamp process improvements propelled by regulations on sulfur, benzene, and oxygenate content in gasoline and refinery pressure to maximize utilization of existing assets.
Download or read book Activation Deactivation and Poisoning of Catalysts written by John Butt and published by Elsevier. This book was released on 2012-12-02 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activation, Deactivation, and Poisoning of Catalysts deals with the circumstances and mechanisms underlying catalyst activation, deactivation, and poisoning. The emphasis is on the techniques for handling deactivating systems, not on results per se. Deactivation by fouling and sintering is given consideration. This book is organized into three sections and consists of 12 chapters. The first part is devoted to a systematic development of the manner in which catalysts are activated, deactivated, poisoned, and in some cases reactivated on a microscopic basis. The first chapter explains the concept of the active center as utilized in catalysis, along with catalyst regeneration, rejuvenation, and detoxification. In the second part, the reader is introduced to the problem of heat transfer as well as the transport of reactants and products in the interior of the particle coupled with chemical reaction therein. The macroscopic deactivation behavior of the catalyst particle is described in terms of fundamental kinetic deactivation phenomena and of parameters governing heat and mass transfer. The last part is primarily concerned with a collection of catalyst particles within the reactor, with emphasis on the global activity of the reactor. In the last chapter, a pragmatic approach is presented to predict the design and performance of chemical reactors containing a deactivating catalyst. This book is written for catalytic chemists, researchers, reactor designers, and students interested in catalyst activation, deactivation, and poisoning.
Download or read book Catalysis written by James J Spivey and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is an increasing challenge for chemical industry and research institutions to find cost-efficient and environmentally sound methods of converting natural resources into fuels chemicals and energy. Catalysts are essential to these processes and the Catalysis Specialist Periodical Report series serves to highlight major developments in this area. This series provides systematic and detailed reviews of topics of interest to scientists and engineers in the catalysis field. The coverage includes all major areas of heterogeneous and homogeneous catalysis and also specific applications of catalysis such as NOx control kinetics and experimental techniques such as microcalorimetry. Each chapter is compiled by recognised experts within their specialist fields and provides a summary of the current literature. This series will be of interest to all those in academia and industry who need an up-to-date critical analysis and summary of catalysis research and applications. Catalysis will be of interest to anyone working in academia and industry that needs an up-to-date critical analysis and summary of catalysis research and applications. Specialist Periodical Reports provide systematic and detailed review coverage in major areas of chemical research. Compiled by teams of leading experts in their specialist fields, this series is designed to help the chemistry community keep current with the latest developments in their field. Each volume in the series is published either annually or biennially and is a superb reference point for researchers. www.rsc.org/spr
Download or read book Catalysts Deactivation Poisoning and Regeneration written by Luciana Lisi and published by . This book was released on 2019 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalyst lifetime represents one of the most crucial economic aspects in industrial catalytic processes, due to costly shutdowns, catalyst replacements, and proper disposal of spent materials. Not surprisingly, there is considerable motivation to understand and treat catalyst deactivation, poisoning, and regeneration, which causes this research topic to continue to grow. The complexity of catalyst poisoning obviously increases along with the increasing use of biomass/waste-derived/residual feedstocks and with requirements for cleaner and novel sustainable processes. This book collects 15 research papers providing insights into several scientific and technical aspects of catalyst poisoning and deactivation, proposing more tolerant catalyst formulations, and exploring possible regeneration strategies.
Download or read book Catalyst Rejuvenation for Heavy Oil Processes written by J. Gary Welch and published by . This book was released on 1986 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalytic Naphtha Reforming Process written by Soni O Oyekan and published by CRC Press. This book was released on 2018-09-05 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the author’s decades of years of experience in oil refining, Catalytic Naphtha Reforming Process conveys essential information on key concepts, operations, and practices of catalytic naphtha reforming technologies and associated oil refining processes. The book reviews collective technical and operational advancements with respect to efficient use of catalysts and catalytic reformers in oil refining and incorporates key advancements from recent developments in catalytic reforming technologies and processes. High octane reformate gasoline blendstock production via the use of high performing continuous catalyst regenerative processes is emphasized for regulated, environmentally friendly gasoline. The benefits of timely, effective process unit monitoring are covered in this book. Some of the principal objectives of this book include the need to emphasize more proactive approaches in the planning, operations and maintenance of catalytic reforming units and oil refineries. A number of recommendations are provided for enhancing the operations, reliability, and productivity of catalytic reformers and oil refineries.
Download or read book Catalysis for Clean Energy and Environmental Sustainability written by K. K. Pant and published by Springer Nature. This book was released on 2021-04-01 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part of a two-volume work that offers a unique blend of information on realistic evaluations of catalyst-based synthesis processes using green chemistry principles and the environmental sustainability applications of such processes for biomass conversion, refining, and petrochemical production. The volumes provide a comprehensive resource of state-of-the-art technologies and green chemistry methodologies from researchers, academics, and chemical and manufacturing industrial scientists. The work will be of interest to professors, researchers, and practitioners in clean energy catalysis, green chemistry, chemical engineering and manufacturing, and environmental sustainability. This volume focuses on catalyst synthesis and green chemistry applications for petrochemical and refining processes. While most books on the subject focus on catalyst use for conventional crude, fuel-oriented refineries, this book emphasizes recent transitions to petrochemical refineries with the goal of evaluating how green chemistry applications can produce clean energy through petrochemical industrial means. The majority of the chapters are contributed by industrial researchers and technicians and address various petrochemical processes, including hydrotreating, hydrocracking, flue gas treatment and isomerization catalysts.
Download or read book Code of Federal Regulations written by and published by . This book was released on 2008 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalyst Regeneration Process written by M. Tojo and published by . This book was released on 1986 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Industrial Catalytic Processes written by C. H. Bartholomew and published by John Wiley & Sons. This book was released on 2011-11-30 with total page 1224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysis is central to the chemical industry, as it is directly or involved in the production of almost all useful chemical products. In this book the authors, present the definitive account of industrial catalytic processes. Throughout Fundamentals of Industrial Catalytic Processes the information is illustrated with many case studies and problems. This book is valuable to anyone wanting a clear account of industrial catalytic processes, but is particularly useful to industrial and academic chemists and engineers and graduate working on catalysis. This book also: Covers fundamentals of catalytic processes, including chemistry, catalyst preparation, properties and reaction engineering. Addresses heterogeneous catalytic processes employed by industry. Provides detailed data on existing catalysts and catalytic reactions, process design and chemical engineering. Covers catalysts used in fuel cells.
Download or read book Hydroprocessing of Heavy Oils and Residua written by Jorge Ancheyta and published by CRC Press. This book was released on 2007-05-08 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many oil refineries employ hydroprocessing for removing sulfur and other impurities from petroleum feedstocks. Capable of handling heavier feedstocks than other refining techniques, hydroprocessing enables refineries to produce higher quality products from unconventional- and formerly wasted- sources. Hydroprocessing of Heavy Oils and Residua
Download or read book Federal Register written by and published by . This book was released on 1998 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt:
