Download or read book Cask Crush Pad Analysis Using Detailed and Simplified Analysis Methods written by and published by . This book was released on 1997 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: A crush pad has been designed and analyzed to absorb the kinetic energy of a hypothetically dropped spent nuclear fuel shipping cask into a 44-ft. deep cask unloading pool at the Fluorinel and Storage Facility (FAST). This facility, located at the Idaho Chemical Processing Plant (ICPP) at the Idaho national Engineering and Environmental Laboratory (INEEL), is a US Department of Energy site. The basis for this study is an analysis by Uldrich and Hawkes. The purpose of this analysis was to evaluate various hypothetical cask drop orientations to ensure that the crush pad design was adequate and the cask deceleration at impact was less than 100 g. It is demonstrated herein that a large spent fuel shipping cask, when dropped onto a foam crush pad, can be analyzed by either hand methods or by sophisticated dynamic finite element analysis using computer codes such as ABAQUS. Results from the two methods are compared to evaluate accuracy of the simplified hand analysis approach.
Download or read book The Office of Environmental Management Technical Reports A Bibliography written by and published by DIANE Publishing. This book was released on 2001 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Office of Environmental Management's (EM) technical reports bibliography is an annual publication that contains information on scientific and technical reports sponsored by the Office of Environmental Management added to the Energy Science and Technology Database from July 1, 1994 through June 30, 1995. This information is divided into the following categories: Focus Areas, Cross-Cutting Programs, and Support Programs. In addition, a category for general information is included. EM's Office of Science and Technology sponsors this bibliography.
Download or read book Proceedings of the American Power Conference written by and published by . This book was released on 1998 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Business of Winemaking written by Jeffrey L. Lamy [Author] and published by Board and Bench Publishing. This book was released on 2015-12-01 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Business of Winemaking places all facets of the wine business in perspective for investors, owners, and anyone else who is interested in how the wine business operates. Abundantly illustrated and written in a readily understandable style, the book addresses the technical rudiments of viticulture and enology and all of its related business actions: market analysis, vineyard and winery design, construction and equipment costs, regulatory and legislative issues, accounting and recordkeeping, financial analysis, tax considerations, typical salaries by geographical area, the minimum economic size of vineyards, the business plan, financing, product pricing, advertising, and sustainable farming and immigrant labor. This book features comprehensive case studies from 20 winery sites from coast to coast, making it an ideal resource for anyone wanting to better understand the inner workings of a successfully run winery.
Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1977 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Standard Methods for the Examination of Water and Wastewater written by American Public Health Association and published by . This book was released on 1981 with total page 1254 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book INIS Atomindex written by and published by . This book was released on 1988 with total page 1308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Historical Painting Techniques Materials and Studio Practice written by Arie Wallert and published by Getty Publications. This book was released on 1995-08-24 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridging the fields of conservation, art history, and museum curating, this volume contains the principal papers from an international symposium titled "Historical Painting Techniques, Materials, and Studio Practice" at the University of Leiden in Amsterdam, Netherlands, from June 26 to 29, 1995. The symposium—designed for art historians, conservators, conservation scientists, and museum curators worldwide—was organized by the Department of Art History at the University of Leiden and the Art History Department of the Central Research Laboratory for Objects of Art and Science in Amsterdam. Twenty-five contributors representing museums and conservation institutions throughout the world provide recent research on historical painting techniques, including wall painting and polychrome sculpture. Topics cover the latest art historical research and scientific analyses of original techniques and materials, as well as historical sources, such as medieval treatises and descriptions of painting techniques in historical literature. Chapters include the painting methods of Rembrandt and Vermeer, Dutch 17th-century landscape painting, wall paintings in English churches, Chinese paintings on paper and canvas, and Tibetan thangkas. Color plates and black-and-white photographs illustrate works from the Middle Ages to the 20th century.
Download or read book Foundation Analysis and Design written by Joseph E. Bowles and published by . This book was released on 1997 with total page 1175 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revision of this best-selling text for a junior/senior course in Foundation Analysis and Design now includes an IBM computer disk containing 16 compiled programs together with the data sets used to produce the output sheets, as well as new material on sloping ground, pile and pile group analysis, and procedures for an improved anlysis of lateral piles. Bearing capacity analysis has been substantially revised for footings with horizontal as well as vertical loads. Footing design for overturning now incorporates the use of the same uniform linear pressure concept used in ascertaining the bearing capacity. Increased emphasis is placed on geotextiles for retaining walls and soil nailing.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1974 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Time Series Analysis and Its Applications written by Robert H. Shumway and published by . This book was released on 2014-01-15 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rock Slope Engineering written by Duncan C. Wyllie and published by CRC Press. This book was released on 2017-09-18 with total page 803 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Slope Engineering covers the investigation, design, excavation and remediation of man-made rock cuts and natural slopes, primarily for civil engineering applications. It presents design information on structural geology, shear strength of rock and ground water, including weathered rock. Slope design methods are discussed for planar, wedge, circular and toppling failures, including seismic design and numerical analysis. Information is also provided on blasting, slope stabilization, movement monitoring and civil engineering applications. This fifth edition has been extensively up-dated, with new chapters on weathered rock, including shear strength in relation to weathering grades, and seismic design of rock slopes for pseudo-static stability and Newmark displacement. It now includes the use of remote sensing techniques such as LiDAR to monitor slope movement and collect structural geology data. The chapter on numerical analysis has been revised with emphasis on civil applications. The book is written for practitioners working in the fields of transportation, energy and industrial development, and undergraduate and graduate level courses in geological engineering.
Download or read book Crime Scene Investigation written by National Institute of Justice (U.S.). Technical Working Group on Crime Scene Investigation and published by . This book was released on 2000 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a guide to recommended practices for crime scene investigation. The guide is presented in five major sections, with sub-sections as noted: (1) Arriving at the Scene: Initial Response/Prioritization of Efforts (receipt of information, safety procedures, emergency care, secure and control persons at the scene, boundaries, turn over control of the scene and brief investigator/s in charge, document actions and observations); (2) Preliminary Documentation and Evaluation of the Scene (scene assessment, "walk-through" and initial documentation); (3) Processing the Scene (team composition, contamination control, documentation and prioritize, collect, preserve, inventory, package, transport, and submit evidence); (4) Completing and Recording the Crime Scene Investigation (establish debriefing team, perform final survey, document the scene); and (5) Crime Scene Equipment (initial responding officers, investigator/evidence technician, evidence collection kits).
Download or read book Lunar Sourcebook written by Grant Heiken and published by CUP Archive. This book was released on 1991-04-26 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only work to date to collect data gathered during the American and Soviet missions in an accessible and complete reference of current scientific and technical information about the Moon.
Download or read book Roadside Design Guide written by American Association of State Highway and Transportation Officials. Task Force for Roadside Safety and published by . This book was released on 1989 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Fingerprint written by U. S. Department Justice and published by Createspace Independent Publishing Platform. This book was released on 2014-08-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea of The Fingerprint Sourcebook originated during a meeting in April 2002. Individuals representing the fingerprint, academic, and scientific communities met in Chicago, Illinois, for a day and a half to discuss the state of fingerprint identification with a view toward the challenges raised by Daubert issues. The meeting was a joint project between the International Association for Identification (IAI) and West Virginia University (WVU). One recommendation that came out of that meeting was a suggestion to create a sourcebook for friction ridge examiners, that is, a single source of researched information regarding the subject. This sourcebook would provide educational, training, and research information for the international scientific community.
Download or read book Fox and McDonald s Introduction to Fluid Mechanics written by Robert W. Fox and published by John Wiley & Sons. This book was released on 2020-06-30 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through ten editions, Fox and McDonald's Introduction to Fluid Mechanics has helped students understand the physical concepts, basic principles, and analysis methods of fluid mechanics. This market-leading textbook provides a balanced, systematic approach to mastering critical concepts with the proven Fox-McDonald solution methodology. In-depth yet accessible chapters present governing equations, clearly state assumptions, and relate mathematical results to corresponding physical behavior. Emphasis is placed on the use of control volumes to support a practical, theoretically-inclusive problem-solving approach to the subject. Each comprehensive chapter includes numerous, easy-to-follow examples that illustrate good solution technique and explain challenging points. A broad range of carefully selected topics describe how to apply the governing equations to various problems, and explain physical concepts to enable students to model real-world fluid flow situations. Topics include flow measurement, dimensional analysis and similitude, flow in pipes, ducts, and open channels, fluid machinery, and more. To enhance student learning, the book incorporates numerous pedagogical features including chapter summaries and learning objectives, end-of-chapter problems, useful equations, and design and open-ended problems that encourage students to apply fluid mechanics principles to the design of devices and systems.
