Download or read book Case Studies for Optimal Control Schemes of Power System with FACTS Devices and Power System Fault Analysis written by Dr Hidaia Mahmood Alassouli and published by . This book was released on 2021-01-06 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is divided to three parts related to case Studies for optimal control schemes of power system with FACTS devices, and power system fault analysis, and some stories of academic corruptions on my life. -Part A: Optimal Control Schemes for Power System with FACTS Devices -Part B. Calculation of Critical Distance in Faulted Meshed Power System -Part C: Real Stories of Academic Corruption in My Life I. Part A: Optimal Control Schemes for Power System with FACTS Devices: Most of the control schemes introduced in the existing papers were designed either for eliminating current harmonics or eliminating voltage flickers or for load flow control. So, this work is devoted to find a proper optimal control schemes for a system with series or shunt or series and shunt converters that can provide all functions together. Various optimal control schemes will be designed for systems with series, shunt and series-shunt converters with the objective to control the load flow through a lines and to eliminate current harmonics and voltage flickers with different strategies for tracking. II. Part B. Calculation of Critical Distance in Faulted Meshed Power System Faults studies form an important part of power system analysis. The problem consists of determining bus voltages and line currents during various types of faults. If the fault location is known the problem can be easily solved. But if the fault location is unkown, it is difficult to solve the problem. If the fault location is known the problem can be easily solved. But if the fault location is unkown, it is difficult to solve the problem. This part provided proper solution based in Gauess Seidal to find the critcal distance in meshed power system III. Part C: Real Stories of Academic Corruption in My Life In this part, I will speak about the academic corruption I saw in some universities and academic institutions according to my experience with them.

Download or read book Case Studies for Optimal Control Schemes of Power System with FACTS Devices and Power Fault Analysis written by Dr. Hedaya Mahmood Alasooly and published by BookRix. This book was released on 2021-01-12 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is divided to three parts related to case Studies for optimal control schemes of power system with FACTS devices, and power system fault analysis, and some stories of academic corruptions on my life. • Part A: Optimal Control Schemes for Power System with FACTS Devices • Part B. Calculation of Critical Distance in Faulted Meshed Power System • Part C: Real Stories of Academic Corruption in My Life I. Part A: Optimal Control Schemes for Power System with FACTS Devices: Most of the control schemes introduced in the existing papers were designed either for eliminating current harmonics or eliminating voltage flickers or for load flow control. So, this work is devoted to find a proper optimal control schemes for a system with series or shunt or series and shunt converters that can provide all functions together. Various optimal control schemes will be designed for systems with series, shunt and series-shunt converters with the objective to control the load flow through a lines and to eliminate current harmonics and voltage flickers with different strategies for tracking. II. Part B. Calculation of Critical Distance in Faulted Meshed Power System Faults studies form an important part of power system analysis. The problem consists of determining bus voltages and line currents during various types of faults. If the fault location is known the problem can be easily solved. But if the fault location is unkown, it is difficult to solve the problem. If the fault location is known the problem can be easily solved. But if the fault location is unkown, it is difficult to solve the problem. This part provided proper solution based in Gauess Seidal to find the critcal distance in meshed power system III. Part C: Real Stories of Academic Corruption in My Life In this part, I will speak about the academic corruption I saw in some universities and academic institutions according to my experience with them.

Download or read book Case Studies for Optimal Control Schemes of Power System with FACTS Devices and Power System Fault Analysis and Some Stories of Academic Corruption on My Life written by Hedaia Mahmood Al-Assouli and published by . This book was released on 2020-12-30 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Case Studies for Optimal Control Schemes of Power System with FACTS Devices and Power System Fault Analysis and Some Stories of Academic Corruption on My Life written by Alassouli Dr. Hidaia Mahmood Alassouli and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Methods for Increasing the Quality and Reliability of Power System Using FACTS Devices written by Dr. Hidaia Mahmood Alassouli and published by Dr. Hidaia Mahmood Alassouli. This book was released on 2020-06-22 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: The thesis will try to summarise the major power system problems and the important role of the FACTS devices to enhance the power system quality. Then, it will give a brief description for various FACTS and Active Filters controllers as mentioned on the existing publications. Most of the control schemes introduced in the existing papers were designed either for eliminating current harmonics or eliminating voltage flickers or for load flow control. So, this work is devoted to find a proper optimal control schemes for a system with series or shunt or series and shunt converters that can provide all functions together.Various optimal control schemes will be designed for systems with series, shunt and series-shunt converters with the objective to control the load flow through a lines and to eliminate current harmonics and voltage flickers with different strategies for tracking. Chapter 1: Gives a general description of most power system problems and the basic techniques used to improve the power system quality. It also gives idea about basic objectives from the FACTS devices.Chapter 2: Offers detailed description for the basic types of FACTS devices and active filters existing in power industry.Chapter 3: Describes various shunt controllers for control of the Static Compensator (STATCOM) and various series controllers for the control of the Static Synchronous Series Compensator (SSSC) and various Unified Power Flow Controllers (UPFC) as covered in most existing papers.Chapter 4: Describes the major control schemes for the shunt active filter as covered by most existing papers.Chapter 5: Describes the major control schemes for the other types of active filters as covered by most existing papers.Chapter 6: Gives description for optimal control design.Chapter 7: Case studies to design different optimal control schemes for system with UPFC unit to control the power flow, eliminate voltage flicker and eliminate current harmonics. The case studies were repeated for system with only series or shunt converters.

Download or read book Methods for Increasing the Quality and Reliability of Power System Using FACTS Devices written by Hidaia Mahmood Alassouli and published by . This book was released on 2020-12-15 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: The thesis will try to summarise the major power system problems and the important role of the FACTS devices to enhance the power system quality. Then, it will give a brief description for various FACTS and Active Filters controllers as mentioned on the existing publications. Most of the control schemes introduced in the existing papers were designed either for eliminating current harmonics or eliminating voltage flickers or for load flow control. So, this work is devoted to find a proper optimal control schemes for a system with series or shunt or series and shunt converters that can provide all functions together. Various optimal control schemes will be designed for systems with series, shunt and series-shunt converters with the objective to control the load flow through a lines and to eliminate current harmonics and voltage flickers with different strategies for tracking. Chapter 1: Gives a general description of most power system problems and the basic techniques used to improve the power system quality. It also gives idea about basic objectives from the FACTS devices. Chapter 2: Offers detailed description for the basic types of FACTS devices and active filters existing in power industry. Chapter 3: Describes various shunt controllers for control of the Static Compensator (STATCOM) and various series controllers for the control of the Static Synchronous Series Compensator (SSSC) and various Unified Power Flow Controllers (UPFC) as covered in most existing papers. Chapter 4: Describes the major control schemes for the shunt active filter as covered by most existing papers. Chapter 5: Describes the major control schemes for the other types of active filters as covered by most existing papers. Chapter 6: Gives description for optimal control design. Chapter 7: Case studies to design different optimal control schemes for system with UPFC unit to control the power flow, eliminate voltage flicker and eliminate current harmonics. The case studies were repeated for system with only series or shunt converters.

Download or read book Optimal Control Schemes for Power System with Unified Power Flow Controller UPFC written by Dr. Hidaia Mahmood Alassouli and published by Dr. Hidaia Mahmood Alassouli. This book was released on 2021-04-18 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: FACTS are one aspect of power electronics revolution that is taking place in all areas of electrical energy. A variable of powerful semiconductor devices not only offer the advantage of high speed and reliability of switching but, more importantly, the opportunity offered by a variety of innovative circuit concepts based on these power devices enhance the value of electric energy. In generation area, the potential application of power electronics is largely in renewable generation. Photovoltaic and fuel cells requires conversion of dc to ac. Generation with variable speed is necessary for economic viability of wind and small hydro generators. Variable-speed wind generators and small hydro generators requires conversion of variable frequency ac to power system frequency. These applications of power electronics in renewable generation area require converter sizes in the range of few kilowatts to few megawatts. In coming decades, electrical energy storage is expected to be widely used in power systems as capacitor, battery and superconducting magnet technologies move forward. Batteries are widely used already for emergency power supplies. These require ac/dc/ac converters in the range of a few kilowatts to a few tens of megawatts. On the other hand, variable speed hydro storage requires converters of up to a few hundred megawatts. In transmission area, application of power electronics consists of High Voltage Direct Current (HVDC) power transmission and FACTS. HVDC is often an economical way to interconnect certain power systems, which are suited in different regions separated by long distances or those have different frequencies or incompatible frequency control. HVDC involves conversion of ac to dc at one end and conversion of dc to ac at the other end. What is most interesting for transmission planners is that FACTS opens up new opportunities for controlling power and enhancing the usable capacity of the lines. The possibility that current through a line can be controlled at reasonable cost enables a large potential of increasing the capacity of the existing lines with larger conductors, and use one of the FACTS controllers to enable corresponding power to flow through lines under normal and contingency conditions. These opportunities arise through the ability of FACTS controllers to control the interrelated parameters that govern the operation of transmission line including series impedance, shunt impedance, current, voltage, phase angle, and the damping of oscillations at various frequencies below the rated frequency. In distribution area, an exciting opportunity called Custom Power. The custom power concept incorporates power electronics controllers and switching equipment, one or more of which can be used to provide a value-added service to the customers. In general, these custom service applications represent power electronics in the range of few tens of kilowatts to few ten of megawatts of conversion or switching equipment between the utility supply and customer. On the end-user side, power electronics conversion and switching technology has been fast growing area. Complementing the Custom Power technology is the whole area of power conditioning technology used by customers, under the term Power Quality. Uninterruptible power supplies (UPS) and voltage regulators represent the major growth area in power electronics. In end use, the converter sizes range from a few watts to ten of megawatts. The term active filter is a general one and is applied to a group of power electronic circuits incorporating power switching devices and passive energy storage circuit elements such as inductors and capacitors. The functions of these circuits vary depending on the applications. They are generally used for controlling current harmonics in supply networks at the low and medium voltage distribution level or for reactive power and/or voltage control at high voltage distribution level. These functions may be combined in a single circuit or in separate active filters. Most of the control schemes introduced in the existing papers were designed either for eliminating current harmonics or eliminating voltage flickers or for load flow control. So, this work is devoted to find a proper optimal control schemes for a system with series or shunt or series and shunt converters that can provide all functions together. Various optimal control schemes will be designed for systems with series, shunt and series-shunt converters with the objective to control the load flow through a lines and to eliminate current harmonics and voltage flickers with different strategies for tracking. · Part 1: Gives the description of optimal control design. · Part 2: Case studies to design different optimal control schemes for system with UPFC unit to control the power flow, eliminate voltage flicker and eliminate current harmonics. The case studies were repeated for system with only series or shunt converters.

Download or read book Methods for Increasing the Quality and Reliability of Power System Using Facts written by Hidaia Alassouli and published by Createspace Independent Publishing Platform. This book was released on 2018-02-04 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The thesis will try to summarise the major power system problems and the important role of the FACTS devices to enhance the power system quality. Then, it will give a brief description for various FACTS and Active Filters controllers as mentioned on the existing publications. Most of the control schemes introduced in the existing papers were designed either for eliminating current harmonics or eliminating voltage flickers or for load flow control. So, this work is devoted to find a proper optimal control schemes for a system with series or shunt or series and shunt converters that can provide all functions together.Various optimal control schemes will be designed for systems with series, shunt and series-shunt converters with the objective to control the load flow through a lines and to eliminate current harmonics and voltage flickers with different strategies for tracking. 1. Chapter 1: Gives a general description of most power system problems and the basic techniques used to improve the power system quality. It also gives idea about basic objectives from the FACTS devices. 2. Chapter 2: Offers detailed description for the basic types of FACTS devices and active filters existing in power industry.3. Chapter 3: Describes various shunt controllers for control of the Static Compensator (STATCOM) and various series controllers for the control of the Static Synchronous Series Compensator (SSSC) and various Unified Power Flow Controllers (UPFC) as covered in most existing papers.4. Chapter 4: Describes the major control schemes for the shunt active filter as covered by most existing papers.5. Chapter 5: Describes the major control schemes for the other types of active filters as covered by most existing papers.6. Chapter 6: Gives description for optimal control design.7. Chapter 7: Case studies to design different optimal control schemes for system with UPFC unit to control the power flow, eliminate voltage flicker and eliminate current harmonics. The case studies were repeated for system with only series or shunt converters. Author: Dr. Hidaia alassouli

Download or read book Control of Flexible Alternating Current Transmission System FACTS for Power Stability Enhancement and Power Quality Improvement written by Dr. Hidaia Mahmood Alassouli and published by Dr. Hidaia Mahmood Alassouli. This book was released on 2021-04-19 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: The thesis will try to summarise the major power system problems and the important role of the FACTS devices to enhance the power system quality. Then, it will give a brief description for various FACTS and Active Filters controllers as mentioned on the existing publications. Most of the control schemes introduced in the existing papers were designed either for eliminating current harmonics or eliminating voltage flickers or for load flow control. So, this work is devoted to find a proper optimal control schemes for a system with series or shunt or series and shunt converters that can provide all functions together. Various optimal control schemes will be designed for systems with series, shunt and series-shunt converters with the objective to control the load flow through a lines and to eliminate current harmonics and voltage flickers with different strategies for tracking. · Chapter 1: Gives a general description of most power system problems and the basic techniques used to improve the power system quality. It also gives idea about basic objectives from the FACTS devices. · Chapter 2: Offers detailed description for the basic types of FACTS devices and active filters existing in power industry. · Chapter 3: Describes various shunt controllers for control of the Static Compensator (STATCOM) and various series controllers for the control of the Static Synchronous Series Compensator (SSSC) and various Unified Power Flow Controllers (UPFC) as covered in most existing papers. · Chapter 4: Describes the major control schemes for the shunt active filter as covered by most existing papers. · Chapter 5: Describes the major control schemes for the other types of active filters as covered by most existing papers. · Chapter 6: Gives description for optimal control design. · Chapter 7: Case studies to design different optimal control schemes for system with UPFC unit to control the power flow, eliminate voltage flicker and eliminate current harmonics. The case studies were repeated for system with only series or shunt converters.

Download or read book Methods for Increasing the Quality and Reliability of Power System Using FACTS written by Hidaia Alassouli and published by . This book was released on 2018-06-12 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Active Filters controllers as mentioned on the existing publications. Most of the control schemes introduced in the existing papers were designed either for eliminating current harmonics or eliminating voltage flickers or for load flow control. So, this work is devoted to find a proper optimal control schemes for a system with series or shunt or series and shunt converters that can provide all functions together. Various optimal control schemes will be designed for systems with series, shunt and series-shunt converters with the objective to control the load flow through a lines and to eliminate current harmonics and voltage flickers with different strategies for tracking. 1. Chapter 1: Gives a general description of most power system problems and the basic techniques used to improve the power system quality. It also gives idea about basic objectives from the FACTS devices. 2. Chapter 2: Offers detailed description for the basic types of FACTS devices and active filters existing in power industry. 3. Chapter 3: Describes various shunt controllers for control of the Static Compensator (STATCOM) and various series controllers for the control of the Static Synchronous Series Compensator (SSSC) and various Unified Power Flow Controllers (UPFC) as covered in most existing papers. 4. Chapter 4: Describes the major control schemes for the shunt active filter as covered by most existing papers. 5. Chapter 5: Describes the major control schemes for the other types of active filters as covered by most existing papers. 6. Chapter 6: Gives description for optimal control design. 7. Chapter 7: Case studies to design different optimal control schemes for system with UPFC unit to control the power flow, eliminate voltage flicker and eliminate current harmonics. The case studies were repeated for system with only series or shunt converters. Author: Dr. Hidaia alassouli Email: [email protected]

Download or read book Control of FACTS Devices for Power Stability Enhancement and Power Quality Improvement written by Dr Hidaia Mahmood Alassouli and published by . This book was released on 2020-08-10 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: The thesis will try to summarise the major power system problems and the important role of the FACTS devices to enhance the power system quality. Then, it will give a brief description for various FACTS and Active Filters controllers as mentioned on the existing publications. Most of the control schemes introduced in the existing papers were designed either for eliminating current harmonics or eliminating voltage flickers or for load flow control. So, this work is devoted to find a proper optimal control schemes for a system with series or shunt or series and shunt converters that can provide all functions together. Various optimal control schemes will be designed for systems with series, shunt and series-shunt converters with the objective to control the load flow through a lines and to eliminate current harmonics and voltage flickers with different strategies for tracking. -Chapter 1: Gives a general description of most power system problems and the basic techniques used to improve the power system quality. It also gives idea about basic objectives from the FACTS devices. -Chapter 2: Offers detailed description for the basic types of FACTS devices and active filters existing in power industry. -Chapter 3: Describes various shunt controllers for control of the Static Compensator (STATCOM) and various series controllers for the control of the Static Synchronous Series Compensator (SSSC) and various Unified Power Flow Controllers (UPFC) as covered in most existing papers. -Chapter 4: Describes the major control schemes for the shunt active filter as covered by most existing papers. -Chapter 5: Describes the major control schemes for the other types of active filters as covered by most existing papers. -Chapter 6: Gives description for optimal control design. -Chapter 7: Case studies to design different optimal control schemes for system with UPFC unit to control the power flow, eliminate voltage flicker and eliminate current harmonics. The case stu

Download or read book Optimal Control Schemes for Power System with Unified Power Flow Controller UPFC written by Hedaya Mahmood Alasooly and published by . This book was released on 2021-03-18 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: What is most interesting for transmission planners is that FACTS opens up new opportunities for controlling power and enhancing the usable capacity of the lines. The possibility that current through a line can be controlled at reasonable cost enables a large potential of increasing the capacity of the existing lines with larger conductors, and use one of the FACTS controllers to enable corresponding power to flow through lines under normal and contingency conditions. These opportunities arise through the ability of FACTS controllers to control the interrelated parameters that govern the operation of transmission line including series impedance, shunt impedance, current, voltage, phase angle, and the damping of oscillations at various frequencies below the rated frequency. In distribution area, an exciting opportunity called Custom Power. The custom power concept incorporates power electronics controllers and switching equipment, one or more of which can be used to provide a value-added service to the customers. In general, these custom service applications represent power electronics in the range of few tens of kilowatts to few ten of megawatts of conversion or switching equipment between the utility supply and customer. On the end-user side, power electronics conversion and switching technology has been fast growing area. Complementing the Custom Power technology is the whole area of power conditioning technology used by customers, under the term Power Quality. Uninterruptible power supplies (UPS) and voltage regulators represent the major growth area in power electronics. In end use, the converter sizes range from a few watts to ten of megawatts. The term active filter is a general one and is applied to a group of power electronic circuits incorporating power switching devices and passive energy storage circuit elements such as inductors and capacitors. The functions of these circuits vary depending on the applications. They are generally used for controlling current harmonics in supply networks at the low and medium voltage distribution level or for reactive power and/or voltage control at high voltage distribution level. These functions may be combined in a single circuit or in separate active filters. Most of the control schemes introduced in the existing papers were designed either for eliminating current harmonics or eliminating voltage flickers or for load flow control. So, this work is devoted to find a proper optimal control schemes for a system with series or shunt or series and shunt converters that can provide all functions together. Various optimal control schemes will be designed for systems with series, shunt and series-shunt converters with the objective to control the load flow through a lines and to eliminate current harmonics and voltage flickers with different strategies for tracking. - Part 1: Gives the description of optimal control design. - Part 2: Case studies to design different optimal control schemes for system with UPFC unit to control the power flow, eliminate voltage flicker and eliminate current harmonics. The case studies were repeated for system with only series or shunt converters.

Download or read book Optimal Power Flow Using FACTS Devices written by L. Ashok Kumar and published by CRC Press. This book was released on 2020-12-03 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal Power Flow Using FACTS Devices: Soft Computing Techniques develops intelligent algorithms to analyze optimal power flow (OPF) and to enhance the power transfer capability of the transmission line with reduced congestion. By providing elaborate studies on FACTS devices and by using soft computing metaheuristics algorithms such as Firefly, Cuckoo, Flower Pollination, and others., this book enables readers to know about algorithms in real-time power system applications and damping of subsynchronous resonance (SSR) oscillations. Key features of this book include: Offers comprehensive review of FACTS devices and the importance of soft computing techniques for solving OPF. Describes the various problems associated with power system operation and control. Addresses issues of SSR in power systems and proposes soft techniques for SSR analysis in power systems. Demonstrates of the importance of SSR and congestion management using intelligent FACTS devices as part of OPF. Covers power systems’ reliability, quality, cost-effectiveness, effects on customer goodwill, and pollution limits, including the deregulation of markets and different intelligent controllers. Optimal Power Flow Using FACTS Devices: Soft Computing Techniques is aimed at researchers and professionals in the field of power systems.

Download or read book Power System Small Signal Stability Analysis and Control written by Debasish Mondal and published by Academic Press. This book was released on 2014-04-28 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power System Small Signal Stability Analysis and Control presents a detailed analysis of the problem of severe outages due to the sustained growth of small signal oscillations in modern interconnected power systems. The ever-expanding nature of power systems and the rapid upgrade to smart grid technologies call for the implementation of robust and optimal controls. Power systems that are forced to operate close to their stability limit have resulted in the use of control devices by utility companies to improve the performance of the transmission system against commonly occurring power system disturbances. This book demonstrates how the application of power system damping controllers such as Power System Stabilizers (PSSs) and Flexible Alternating Current Transmission System (FACTS) controllers—namely Static Var Compensator (SVC) and Thyristor Controlled Series Compensator (TCSC)—can guard against system disruptions. Power System Small Signal Stability Analysis and Control examines the signal stability problem, providing an overview and analysis of the concepts and of the controllers used to mitigate it. Detailed mathematical derivations, illustrated case studies, the application of soft computation techniques, designs of robust controllers, and end-of-chapter exercises make it a useful resource to researchers, practicing engineers, and post-graduates in electrical engineering. Examines the power system small signal stability problem and various ways to mitigate it Offers a new and simple method of finding the optimal location of PSS in a multi-machine power system Provides relevant exercises to further illustrate chapter-specific content

Download or read book Hvdc Transmission 1 Vsc Hvdc Based Mmc Topology In Power Systems written by Chan-ki Kim and published by World Scientific. This book was released on 2021-04-09 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: HVDC grids and super grids have sparked so much interest these days that researchers and engineers across the globe are talking about them, studying them, supporting them, or questioning them. This book provides valuable information for researchers, industry, and policy makers. It explains why HVDC is favorable over AC technologies for power transmission; what the key technologies and challenges are for developing an HVDC grid; how an HVDC grid will be designed and operated; and how future HVDC grids will evolve. The book also devotes significant attention to nontechnical aspects such as the influence of energy policy and regulatory frameworks.This book is a result of collaboration between industry and academia. It provides theoretical insights into the design and control of MMC technology and investigates practical aspects of the project planning, design, manufacture, implementation, and commissioning of MMC-HVDC and multi-terminal HVDC transmission technologies; filling the knowledge gap between the technology specialists and VSC-HVDC project developers and key personnel involved in those projects.

Download or read book Dissertation Abstracts International written by and published by . This book was released on 2005 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Methods for Increasing the Quality and Reliability of Power System Using Flexible Alternating Current Transmission System FACTS Devices written by Hidaia Alassouli and published by . This book was released on 2018-06-22 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The thesis will try to summarise the major power system problems and the important role of the FACTS devices to enhance the power system quality. Various optimal control schemes will be designed for systems with series, shunt and series-shunt converters with the objective to control the load flow through a lines and to eliminate current harmonics and voltage flickers with different strategies for tracking.Table of ContentsPerface 1 Chapter 1: Basic Power System Quality ProblemsChapter 2: FACTS Devices and Active FiltersChapter 3: Control Strategies for Shunt and Series FACTS DevicesChapter 4: Three Phase Shunt Active Power Filter Control AlgorithmsChapter 5: Other Three Phase Active Power Filter Topologies Control AlgorithmsChapter 6: Optimal ControlChapter 7: Optimal Control of UPFC for Load Flow Control and Voltage Flicker and Current Harmonics EliminationChapter 8: Summery References