Download or read book Deposition of Carbon Nitrides Using Pulsed Laser Ablation and Microwave assisted Chemical Vapor Deposition Techniques written by Jacob Anthony Hernandez and published by . This book was released on 1999 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization of Carbon Nitride Films Produced by Pulsed Laser Deposition written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nitride (CN[sub x]) films have been grown by ion-assisted pulsed-laser deposition (IAPLD). Graphite targets were laser ablated while bombarding the substrate with ions from a broad-beam Kaufman-type ion source. Ion voltage, current density, substrate temperature, and feed gas composition (N[sub 2] in Ar) were varied. Resultant films were characterized by Raman. Fourier transform infrared (FTIR), and Rutherford back scattering (RBS) spectroscopy. Samples with[approximately] 30% N/C ratio have been fabricated. The corresponding Raman and FTIR spectra indicate that nitrogen is incorporated into the samples by insertion into sp[sup 2]-bonded structures. A low level of C[identical-to]N triple bonds is also found. As the ion current and voltage are increased with a pure Ar ion beam, Raman peaks associated with nanocrystalline graphite appear in the spectra. Adding low levels of nitrogen to the ion beam first reduces the Raman intensity in the vicinity of the graphite disorder peak without adding detectable amounts of nitrogen to the films (as measured by RBS). At higher nitrogen levels in the ion beam, significant amounts of nitrogen are incorporated into the samples, and the magnitude of the''disorder'' peak increases. By increasing the temperature of the substrate during deposition, the broad peak due mainly to sp[sup 2]-bonded C-N in the FTIR spectra is shifted to lower wavenumber. This could be interpreted as evidence of single-bonded C-N; however, it is more likely that the character of the sp[sup 2] bonding is changing.
Download or read book Meeting Abstracts written by Electrochemical Society. Meeting and published by . This book was released on 1997 with total page 3084 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Modification Technologies XIV written by T. S. Sudarshan and published by CRC Press. This book was released on 2001 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cold Plasma in Food and Agriculture written by NN Misra and published by Academic Press. This book was released on 2016-07-15 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cold Plasma in Food and Agriculture: Fundamentals and Applications is an essential reference offering a broad perspective on a new, exciting, and growing field for the food industry. Written for researchers, industry personnel, and students interested in nonthermal food technology, this reference will lay the groundwork of plasma physics, chemistry, and technology, and their biological applications. Food scientists and food engineers interested in understanding the theory and application of nonthermal plasma for food will find this book valuable because it provides a roadmap for future developments in this emerging field. This reference is also useful for biologists, chemists, and physicists who wish to understand the fundamentals of plasma physics, chemistry, and technology and their biological interactions through applying novel plasma sources to food and other sensitive biomaterials. Examines the topic of cold plasma technology for food applications Demonstrates state-of-the-art developments in plasma technology and potential solutions to improve food safety and quality Presents a solid introduction for readers on the topics of plasma physics and chemistry that are required to understand biological applications for foods Serves as a roadmap for future developments for food scientists, food engineers, and biologists, chemists, and physicists working in this emerging field
Download or read book Metals Abstracts written by and published by . This book was released on 1993 with total page 1216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Advances in Technology Research and Education written by Dumitru Luca and published by Springer. This book was released on 2017-09-08 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected contributions to the 16th International Conference on Global Research and Education Inter-Academia 2017 hosted by Alexandru Ioan Cuza University of Iași, Romania from 25 to 28 September 2017. It is the third volume in the series, following the editions from 2015 and 2016. Fundamental and applied research in natural sciences have led to crucial developments in the ongoing 4th global industrial revolution, in the course of which information technology has become deeply embedded in industrial management, research and innovation – and just as deeply in education and everyday life. Materials science and nanotechnology, plasma and solid state physics, photonics, electrical and electronic engineering, robotics and metrology, signal processing, e-learning, intelligent and soft computing have long since been central research priorities for the Inter-Academia Community (I-AC) – a body comprising 14 universities and research institutes from Japan and Central/East-European countries that agreed, in 2002, to coordinate their research and education programs so as to better address today’s challenges. The book is intended for use in academic, government, and industrial R&D departments as a reference tool in research and technology education. The 42 peer-reviewed papers were written by more than 119 leading scientists from 14 countries, most of them affiliated to the I-AC.
Download or read book Handbook of Transparent Conductors written by David S. Ginley and published by Springer Science & Business Media. This book was released on 2010-09-11 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transparent conducting materials are key elements in a wide variety of current technologies including flat panel displays, photovoltaics, organic, low-e windows and electrochromics. The needs for new and improved materials is pressing, because the existing materials do not have the performance levels to meet the ever- increasing demand, and because some of the current materials used may not be viable in the future. In addition, the field of transparent conductors has gone through dramatic changes in the last 5-7 years with new materials being identified, new applications and new people in the field. “Handbook of Transparent Conductors” presents transparent conductors in a historical perspective, provides current applications as well as insights into the future of the devices. It is a comprehensive reference, and represents the most current resource on the subject.
Download or read book Plasma Processes and Polymers written by Riccardo d'Agostino and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume compiles essential contributions to the most innovative fields of Plasma Processes and Polymers. High-quality contributions cover the fields of plasma deposition, plasma treatment of polymers and other organic compounds, plasma processes under partial vacuum and at atmospheric pressure, biomedical, textile, automotive, and optical applications as well as surface treatment of bulk materials, clusters, particles and powders. This unique collection of refereed papers is based on the best contributions presented at the 16th International Symposium on Plasma Chemistry in Taormina, Italy (ISPC-16, June 2003). A high class reference of relevance to a large audience in plasma community as well as in the area of its industrial applications.
Download or read book Cathodic Arcs written by André Anders and published by Springer Science & Business Media. This book was released on 2009-07-30 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cathodic arcs are among the longest studied yet least understood objects in science. Plasma-generating, tiny spots appear on the cathode; they are highly dynamic and hard to control. With an approach emphasizing the fractal character of cathode spots, strongly fluctuating plasma properties are described such as the presence of multiply charged ions that move with supersonic velocity. Richly illustrated, the book also deals with practical issues, such as arc source construction, macroparticle removal, and the synthesis of dense, well adherent coatings. The book spans a bridge from plasma physics to coatings technology based on energetic condensation, appealing to scientists, practitioners and graduate students alike.
Download or read book Scale Relativity and Fractal Space time written by Laurent Nottale and published by World Scientific. This book was released on 2011 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive survey of the state-of-the-art in the development of the theory of scale relativity and fractal space-time. It suggests an original solution to the disunified nature of the classical-quantum transition in physical systems, enabling quantum mechanics to be based on the principle of relativity provided this principle is extended to scale transformations of the reference system. In the framework of such a newly-generalized relativity theory (including position, orientation, motion and now scale transformations), the fundamental laws of physics may be given a general form that goes beyond and integrates the classical and the quantum regimes. A related concern of this book is the geometry of space-time, which is described as being fractal and nondifferentiable. It collects and organizes theoretical developments and applications in many fields, including physics, mathematics, astrophysics, cosmology and life sciences.
Download or read book Advanced Technologies Based on Wave and Beam Generated Plasmas written by H. Schlüter and published by Springer Science & Business Media. This book was released on 1999-02-28 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book draws together three areas of work on plasma technologies: advanced efforts based on wave generated, high frequency plasmas, plasma assisted ion implantation, and electron beam generated plasma. It lays a foundation for the application of sources in industry and various research areas
Download or read book Arc Plasma Technology in Materials Science written by Dennis A. Gerdeman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although a considerable amount of information concerning the applications for arc plasmas in the materials sciences is available, it is contained in literally thousands of separate manuals, technical notes, textbooks, and government and industrial reports. Each source generally deals with only one specific application or, at best, a narrow range of utilization. This book was developed to provide a comprehensive and up-to-date compilation of information in the technology of arc plasma utilization. The book is divided into two general categories: flame spraying and materials evaluation. In the flame spraying section a comprehensive review of the plasma spraying process is presented. The design and operation of plasma spraying equipment are described. Included are a description of the nature of a plasma, and the design and operation of plasma generators, powder feed systems and accessory control equip ment. The general process procedures, and associated process variables are de scribed. Particular emphasis is given to the particle heating process and the mechanisms for adherence and cohesion of coatings. Competitive flame spraying equipment is also detailed (combustion process, detonation and electric arc) and compared with the plasma spray process. A discussion and compilation of flame sprayed ceramic and metal materials, their properties and applications are also included.
Download or read book Laser Ablation in Liquids written by Guowei Yang and published by CRC Press. This book was released on 2012-02-22 with total page 1166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the fundamental concepts and physical and chemical aspects of pulsed laser ablation of solid targets in liquid environments and its applications in the preparation of nanomaterials and fabrication of nanostructures. The areas of focus include basic thermodynamic and kinetic processes of laser ablation in liquids, and its applic
Download or read book Photoelectrocatalysis written by Leonardo Palmisano and published by Elsevier. This book was released on 2022-10-21 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoelectrocatalysis: Fundamentals and Applications presents an in-depth review of the topic for students and researchersworking on photoelectrocatalysis-related subjects from pure chemistry to materials and environmental chemistry inorder to propose applications and new perspectives. The main advantage of a photoelectrocatalytic process is the mildexperimental conditions under which the reactions are carried out, which are often possible at atmospheric pressure androom temperature using cheap and nontoxic solvents (e.g., water), oxidants (e.g., O2 from the air), catalytic materials (e.g.,TiO2 on Ti layer), and the potential exploitation of solar light. This book presents the fundamentals and the applications of photoelectrocatalysis, such as hydrogen production fromwater splitting, the remediation of harmful compounds, and CO2 reduction. Photoelectrocatalytic reactors and lightsources, in addition to kinetic aspects, are presented along with an exploration of the relationship between photocatalysisand electrocatalysis. In addition, photocorrosion issues and the application of selective photoelectrocatalytic organictransformations, which is now a growing field of research, are also reported. Finally, the advantages/disadvantages andfuture perspectives of photoelectrocatalysis are highlighted through the possibility of working at a pilot/industrial scale inenvironmentally friendly conditions. Presents the fundamentals of photoelectrocatalysis Outlines photoelectrocatalytic green chemistry Reviews photoelectrocatalytic remediation of harmful compounds, hydrogen production, and CO2 reduction Includes photocorrosion, photoelectrocatalytic reactors, and modeling along with kinetic aspects
Download or read book Excitation Equilibria in Plasmas written by Jan-Joseph A. van der Mullen and published by . This book was released on 1990 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The New Nuclear Forensics written by Vitaly Fedchenko and published by Oxford University Press. This book was released on 2015 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear material changes its form and properties as it moves through the nuclear fuel cycle, from one facility to another. Each step of the fuel cycle or each use of the material will inevitably leave its mark. The science of determining the history of a sample of nuclear material through the study of these characteristics is known as nuclear forensics. While nuclear forensic analysis has normally been associated with investigations and prosecutions in the contextof trafficking of nuclear materials or nuclear terrorism, it had wider applications in in national security contexts, such as nuclear non-proliferation, disarmament, and arms control. The New Nuclear Forensics is the first book to give a definitive guide to this broader definition of nuclear forensic analysis. This book describes the various methods used in nuclear forensics, giving first a broad introduction to the process followed by details of relevant measurement techniques and procedures. In each case, the advantages and limitations are outlined. To put these methods in context, the book also recounts the history of the discipline anddescribes the diverse contemporary applications of nuclear forensics.
