Download or read book Carbon Nanotubes Graphene and Related Nanostructures Volume 1407 written by Yoke Khin Yap and published by Materials Research Society. This book was released on 2012-07-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes, graphene, and related nanostructures have attracted tremendous attentions for their unique structures and intriguing properties. These nanomaterials have been widely investigated, from theory, synthesis and characterization to applications in electronic devices, electron field emission displays, energy generation and storage, and biological and chemical sensors, etc. In addition, non-carbon nanostructures such as nanotubes and nanosheets of boron nitride (BN), boron-carbon nitride (BCN), have gained increasing interest. To facilitate scientific interaction among students and researchers on the latest advancement in this area, Symposium AA, "Carbon Nanotubes, Graphene and Related Nanostructures," was organized and held at the 2011 MRS Fall Meeting in Boston, Massachusetts. This was the largest symposium in the meeting and it emphasized all research aspects of carbon and non-carbon nanotubes and related nanostructures. This proceedings volume consists of peer-reviewed papers presented in the symposium, including invited and contributed presentations.
Download or read book Carbon Nanotubes Quantum Cylinders of Graphene written by and published by Elsevier. This book was released on 2008-09-10 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is devoted to mostly to nanotubes, unique synthetic nanoscale quantum systems whose physical properties are often singular (i.e. record-setting). Nanotubes can be formed from a myriad of atomic or molecular species, the only requirement apparently being that the host material or “wall fabric be configurable as a layered or sheet-like structure. Nanotubes with sp2-bonded atoms such as carbon, or boron together with nitrogen, are the champions of extreme mechanical strength, electrical response (either highly conducting or highly insulating), and thermal conductance. Carbon nanotubes can be easily produced by a variety of synthesis techniques, and for this reason they are the most studied nanotubes, both experimentally and theoretically. Boron nitride nanotubes are much more difficult to produce and only limited experimental characterization data exist. Indeed, for boron nitride nanotubes, theory is well ahead of experiment. For these reasons this volume deals largely with carbon nanotubes. Conceptually, the "building block" for a carbon nanotube is a single sheet of graphite, called graphene. Recently, it has become possible to experimentally isolate such single sheets (either on a substrate or suspended). This capability has in turn fueled many new theoretical and experimental studies of graphene itself. It is therefore fitting that this volume contains also a chapter devoted to graphene. - Comprehension- Overview- Highlights in the field
Download or read book Carbon Nanotubes written by Ado Jorio and published by Springer Science & Business Media. This book was released on 2007-12-18 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the success of its predecessor, Carbon Nanotubes: Synthesis, Structure, Properties and Applications, this second volume focuses on those areas that have grown rapidly in the past few years. Contributing authors reflect the multidisciplinary nature of the book and are all leaders in their particular areas of research. Among the many topics they cover are graphene and other carbon-like and tube-like materials, which are likely to affect and influence developments in nanotubes within the next five years. Extensive use of illustrations enables you to better understand and visualize key concepts and processes.
Download or read book Graphene Carbon Nanotubes and Nanostructures written by James E. Morris and published by CRC Press. This book was released on 2017-07-28 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene, Carbon Nanotubes, and Nanostructures: Techniques and Applications offers a comprehensive review of groundbreaking research in nanofabrication technology and explores myriad applications that this technology has enabled. The book examines the historical evolution and emerging trends of nanofabrication and supplies an analytical understanding of some of the most important underlying nanofabrication technologies, with an emphasis on graphene, carbon nanotubes (CNTs), and nanowires. Featuring contributions by experts from academia and industry around the world, this book presents cutting-edge nanofabrication research in a wide range of areas. Topics include: CNT electrodynamics and signal propagation models Electronic structure calculations of a graphene–hexagonal boron nitride interface to aid the understanding of experimental devices based on these heterostructures How a laser field would modify the electronic structure and transport response of graphene, to generate bandgaps The fabrication of transparent CNT electrodes for organic light-emitting diodes Direct graphene growth on dielectric substrates, and potential applications in electronic and spintronic devices CNTs as a promising candidate for next-generation interconnect conductors CMOS–CNT integration approaches, including the promising localized heating CNT synthesis method CNTs in electrochemical and optical biosensors The synthesis of diamondoids by pulsed laser ablation plasmas generated in supercritical fluids, and possible applications The use of DNA nanostructures in lithography CMOS-compatible silicon nanowire biosensors The use of titanium oxide-B nanowires to detect explosive vapors The properties of protective layers on silver nanoparticles for ink-jet printing Nanostructured thin-film production using microreactors A one-stop reference for professionals, researchers, and graduate students working in nanofabrication, this book will also be useful for investors who want an overview of the current nanofabrication landscape.
Download or read book Graphene and Carbon Nanotubes written by Ermin Malic and published by John Wiley & Sons. This book was released on 2013-04-12 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: A first on ultrafast phenomena in carbon nanostructures like graphene, the most promising candidate for revolutionizing information technology and communication The book introduces the reader into the ultrafast nanoworld of graphene and carbon nanotubes, including their microscopic tracks and unique optical finger prints. The author reviews the recent progress in this field by combining theoretical and experimental achievements. He offers a clear theoretical foundation by presenting transparently derived equations. Recent experimental breakthroughs are reviewed. By combining both theory and experiment as well as main results and detailed theoretical derivations, the book turns into an inevitable source for a wider audience from graduate students to researchers in physics, materials science, and electrical engineering who work on optoelectronic devices, renewable energies, or in the semiconductor industry.
Download or read book Handbook Of Carbon Nano Materials Volumes 5 6 written by Karl M Kadish and published by World Scientific. This book was released on 2014-01-22 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fifth and sixth volumes of the Handbook of Carbon Nano Materials focus on fundamental properties and key applications of graphene. Graphene, the thinnest known material made of a single atom thick sheet of carbon atoms arranged hexagonally, offers great opportunities for application development in nanotechnology. This handbook covers fundamental properties, characterization, chemical manipulation, and applications of graphene. Specific applications cover latest developments in chemical manipulation, thermodynamic characterization, energy conversion and storage, and biosensor development.
Download or read book Understanding Carbon Nanotubes written by Annick Loiseau and published by Springer. This book was released on 2006-08-29 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the foundations of carbon nanotube science, reviewing recent developments and prospects for practical application. Each chapter summarizes relevant concepts from physics, chemistry or materials science, followed by detailed reports on topics including polymorphism and mircostructure of carbon; synthesis and growth; structural analysis by electron microscopy; spectroscopic methods; electronic structure; transport; mechanical and surface properties of nanotubes and composites.
Download or read book Handbook Of Carbon Nanomaterials Volumes 9 10 written by R Bruce Weisman and published by World Scientific. This book was released on 2019-01-22 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a tribute to the career of Prof. Mildred Dresselhaus. It focuses on the optical properties and spectroscopy of single-wall carbon nanotubes. It contains chapters on diverse experimental and theoretical aspects of the field, written by internationally recognized experts. The volume serves as an important resource for researchers and students interested in carbon nanotubes.
Download or read book Carbon Nanotubes and Graphene written by Kazuyoshi Tanaka and published by Newnes. This book was released on 2014-07-10 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotubes and Graphene is a timely second edition of the original Science and Technology of Carbon Nanotubes. Updated to include expanded coverage of the preparation, purification, structural characterization, and common application areas of single- and multi-walled CNT structures, this work compares, contrasts, and, where appropriate, unitizes CNT to graphene. This much expanded second edition reference supports knowledge discovery, production of impactful carbon research, encourages transition between research fields, and aids the formation of emergent applications. New chapters encompass recent developments in the theoretical treatments of electronic and vibrational structures, and magnetic, optical, and electrical solid-state properties, providing a vital base to research. Current and potential applications of both materials, including the prospect for large-scale synthesis of graphene, biological structures, and flexible electronics, are also critically discussed. Updated discussion of properties, structure, and morphology of biological and flexible electronic applications aids fundamental knowledge discovery Innovative parallel focus on nanotubes and graphene enables you to learn from the successes and failures of, respectively, mature and emergent partner research disciplines High-quality figures and tables on physical and mathematical applications expertly summarize key information – essential if you need quick, critically relevant data
Download or read book An Introduction to Graphene and Carbon Nanotubes written by John E. Proctor and published by CRC Press. This book was released on 2017-02-03 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes and graphene have been the subject of intense scientific research since their relatively recent discoveries. This book introduces the reader to the science behind these rapidly developing fields, and covers both the fundamentals and latest advances. Uniquely, this book covers the topics in a pedagogical manner suitable for undergraduate students. The book also uses the simple systems of nanotubes and graphene as models to teach concepts such as molecular orbital theory, tight binding theory and the Laue treatment of diffraction. Suitable for undergraduate students with a working knowledge of basic quantum mechanics, and for postgraduate researchers commencing their studies into the field, this book will equip the reader to critically evaluate the physical properties and potential for applications of graphene and carbon nanotubes.
Download or read book A Primer on the Geometry of Carbon Nanotubes and Their Modifications written by Sadegh Imani Yengejeh and published by Springer. This book was released on 2015-01-12 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a comprehensive system for categorizing carbon nanotubes and their modifications in terms of nano sheets, nanotubes, microscopic and atomic modifications. In addition, the material and geometric properties of these nano-configurations are addressed. Lastly, it introduces a number of common software packages for geometry generation and several commercial finite element programs.
Download or read book Handbook of Graphene Volume 3 written by Mei Zhang and published by John Wiley & Sons. This book was released on 2019-06-11 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third volume in a series of handbooks on graphene research and applications Graphene is a valuable nanomaterial used in technology. This handbook is focused on Graphene-Like 2D Materials. The Handbook of Graphene, Volume 3 covers topics that include planar graphene superlattices; magnetic and optical properties of graphene materials with porous defects; and nanoelectronic application of graphyne and its structural derivatives.
Download or read book Graphene and Related Nanomaterials written by Paolo Bondavalli and published by Elsevier. This book was released on 2017-10-26 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene and Related Nanomaterials: Properties and Applications outlines the physics and the applications of graphene-related materials, including graphene, graphene oxide and carbon nanotubes. The first chapter introduces the physics of graphene and related nanomaterials. The following sections deal with different applications spanning from gas sensors to non-volatile memories and supercapacitors. The book also covers spintronics for graphene. In each chapter, specific applications are explained in a detailed way. This book will appeal to materials scientists and engineers looking to understand more about the nature of graphene and how it is currently being used. Explains how particular physical properties of graphene make it suitable for specific applications Explores current applications in sensing and energy Assesses the challenges of using carbon nanomaterials in engineering and evaluates future opportunities Appeals to materials scientists and engineers looking to understand more about the nature of graphene and how it is currently being used
Download or read book Carbon Nanomaterials Sourcebook written by Klaus D. Sattler and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The Carbon Nanomaterials Sourcebook contains extensive, interdisciplinary coverage of carbon nanomaterials, encompassing the full scope of the field - from physics, chemistry, and materials science to molecular biology, engineering, and medicine - in two comprehensive volumes. Each chapter is dedicated to a different type of carbon nanomaterial and addresses three main areas: formation, properties, and applications."--
Download or read book Carbon Functional Nanomaterials Graphene and Related 2D Layered Systems Volume 1549 written by Mauricio Terrones and published by Materials Research Society. This book was released on 2014-02-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: For almost two decades now, the carbon nanomaterial (CNM) system has persistently provided researchers the opportunity for spectacular new discoveries, significant advances in fundamental and applied science, and the development of disruptive technologies and applications. The rich allotropicity of carbon bonding can explain the broad use of carbon-based materials such as carbon nanotubes (CNT), diamond, fullerenes, and more recently graphene. Today's research community continues to discover and harness new low-dimensional carbon allotropes, perhaps at a historically unprecedented rate. These exciting developments and others are covered in this volume and will be relevant and useful when carrying out fundamental research in the areas of carbon nanoscience and 2D systems.
Download or read book Graphene Carbon Nanotubes and Nanostructures written by James Morris and published by . This book was released on 2016 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene, Carbon Nanotubes, and Nanostructures: Techniques and Applications offers a comprehensive review of groundbreaking research in nanofabrication technology and explores myriad applications that this technology has enabled. The book examines the historical evolution and emerging trends of nanofabrication and supplies an analytical understanding of some of the most important underlying nanofabrication technologies, with an emphasis on graphene, carbon nanotubes (CNTs), and nanowires. Featuring contributions by experts from academia and industry around the world, this book presents cutting-edge nanofabrication research in a wide range of areas. Topics include: CNT electrodynamics and signal propagation models Electronic structure calculations of a graphene-hexagonal boron nitride interface to aid the understanding of experimental devices based on these heterostructures How a laser field would modify the electronic structure and transport response of graphene, to generate bandgaps The fabrication of transparent CNT electrodes for organic light-emitting diodes Direct graphene growth on dielectric substrates, and potential applications in electronic and spintronic devices CNTs as a promising candidate for next-generation interconnect conductors CMOS-CNT integration approaches, including the promising localized heating CNT synthesis method CNTs in electrochemical and optical biosensors The synthesis of diamondoids by pulsed laser ablation plasmas generated in supercritical fluids, and possible applications The use of DNA nanostructures in lithography CMOS-compatible silicon nanowire biosensors The use of titanium oxide-B nanowires to detect explosive vapors The properties of protective layers on silver nanoparticles for ink-jet printing Nanostructured thin-film production using microreactors A one-stop reference for professionals, researchers, and graduate students working in nanofabrication, this book will also be useful for investors who want an overview of the current nanofabrication landscape.
Download or read book Graphene Science Handbook Six Volume Set written by Mahmood Aliofkhazraei and published by CRC Press. This book was released on 2016-04-26 with total page 3379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene is the strongest material ever studied and can be an efficient substitute for silicon. This six-volume handbook focuses on fabrication methods, nanostructure and atomic arrangement, electrical and optical properties, mechanical and chemical properties, size-dependent properties, and applications and industrialization. There is no other major reference work of this scope on the topic of graphene, which is one of the most researched materials of the twenty-first century. The set includes contributions from top researchers in the field and a foreword written by two Nobel laureates in physics. Volumes in the set: K20503 Graphene Science Handbook: Mechanical and Chemical Properties (ISBN: 9781466591233) K20505 Graphene Science Handbook: Fabrication Methods (ISBN: 9781466591271) K20507 Graphene Science Handbook: Electrical and Optical Properties (ISBN: 9781466591318) K20508 Graphene Science Handbook: Applications and Industrialization (ISBN: 9781466591332) K20509 Graphene Science Handbook: Size-Dependent Properties (ISBN: 9781466591356) K20510 Graphene Science Handbook: Nanostructure and Atomic Arrangement (ISBN: 9781466591370)
