Download or read book Carbon Nanotubes for Polymer Reinforcement written by Peng-Cheng Ma and published by CRC Press. This book was released on 2011-03-22 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discovered in the twentieth century, carbon nanotubes (CNT) were an integral part of science and industry by the beginning of the twenty first century, revolutionizing chemistry, physics, and materials science. More recent advances in carbon nanotube production methods have resulted in a tremendous push to incorporate CNTs into polymer matrices. Al
Download or read book Carbon Nanotube Reinforced Polymers written by Roham Rafiee and published by Elsevier. This book was released on 2017-10-06 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube-Reinforced Polymers: From Nanoscale to Macroscale addresses the advances in nanotechnology that have led to the development of a new class of composite materials known as CNT-reinforced polymers. The low density and high aspect ratio, together with their exceptional mechanical, electrical and thermal properties, render carbon nanotubes as a good reinforcing agent for composites. In addition, these simulation and modeling techniques play a significant role in characterizing their properties and understanding their mechanical behavior, and are thus discussed and demonstrated in this comprehensive book that presents the state-of-the-art research in the field of modeling, characterization and processing. The book separates the theoretical studies on the mechanical properties of CNTs and their composites into atomistic modeling and continuum mechanics-based approaches, including both analytical and numerical ones, along with multi-scale modeling techniques. Different efforts have been done in this field to address the mechanical behavior of isolated CNTs and their composites by numerous researchers, signaling that this area of study is ongoing. Explains modeling approaches to carbon nanotubes, together with their application, strengths and limitations Outlines the properties of different carbon nanotube-based composites, exploring how they are used in the mechanical and structural components Analyzes the behavior of carbon nanotube-based composites in different conditions
Download or read book Carbon Nanotube Reinforced Composites written by Marcio Loos and published by Elsevier. This book was released on 2014-09-11 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube Reinforced Composites introduces a wide audience of engineers, scientists and product designers to this important and rapidly expanding class of high performance composites. Dr Loos provides readers with the scientific fundamentals of carbon nanotubes (CNTs), CNT composites and nanotechnology in a way which will enable them to understand the performance, capability and potential of the materials under discussion. He also investigates how CNT reinforcement can be used to enhance the mechanical, electrical and thermal properties of polymer composites. Production methods, processing technologies and applications are fully examined, with reference to relevant patents. Finally, health and safety issues related to the use of CNTs are investigated. Dr. Loos compares the theoretical expectations of using CNTs to the results obtained in labs, and explains the reasons for the discrepancy between theoretical and experimental results. This approach makes the book an essential reference and practical guide for engineers and product developers working with reinforced polymers – as well as researchers and students in polymer science, materials and nanotechnology. A wealth of applications information is included, taken from the wide range of industry sectors utilizing CNT reinforced composites, such as energy, coatings, defense, electronics, medical devices, and high performance sports equipment. Introduces a wide range of readers involved in plastics engineering, product design and manufacturing to the relevant topics in nano-science, nanotechnology, nanotubes and composites. Assesses effects of CNTs as reinforcing agents, both in a materials context and an applications setting. Focuses on applications aspects – performance, cost, health and safety, etc – for a wide range of industry sectors, e.g. energy, coatings, defense, electronics, medical devices, high performance sports equipment, etc.
Download or read book Carbon Nanotube Polymer Composites written by Dimitrios Tasis and published by Royal Society of Chemistry. This book was released on 2015-11-09 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemically-modified carbon nanotubes (CNTs) exhibit a wide range of physical and chemical properties which makes them an attractive starting material for the preparation of super-strong and highly-conductive fibres and films. Much information is available across the primary literature, making it difficult to obtain an overall picture of the state-of-the-art. This volume brings together some of the leading researchers in the field from across the globe to present the potential these materials have, not only in developing and characterising novel materials but also the devices which can be fabricated from them. Topics featured in the book include Raman characterisation, industrial polymer materials, actuators and sensors and polymer reinforcement, with chapters prepared by highly-cited authors from across the globe. A valuable handbook for any academic or industrial laboratory, this book will appeal to newcomers to the field and established researchers alike.
Download or read book Fundamentals of Conjugated Polymer Blends Copolymers and Composites written by Parveen Saini and published by John Wiley & Sons. This book was released on 2015-04-30 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery in 1977, the evolution of conducting polymers has revolutionized modern science and technology. These polymers enjoy a special status in the area of materials science yet they are not as popular among young readers or common people when compared to other materials like metals, paper, plastics, rubber, textiles, ceramics and composites like concrete. Most importantly, much of the available literature in the form of papers, specific review articles and books is targeted either at advanced readers (scientists / technologists / engineers / senior academicians) or for those who are already familiar with the topic (doctoral / postdoctoral scholars). For a beginner or even school / college students, such compilations are bit difficult to access / digest. In fact, they need proper introduction to the topic of conducting polymers including their discovery, preparation, properties, applications and societal impact, using suitable examples and already known principles/knowledge/phenomenon. Further, active participation of readers in terms of "question & answers", "fill-in-the-blanks", "numerical" along with suitable answer key is necessary to maintain the interest and to initiate the "thought process". The readers also need to know about the drawbacks and any hazards of such materials. Therefore, I believe that a comprehensive source on the science / technology of conducting polymers which maintains a link between grass root fundamentals and state-of-the-art R&D is still missing from the open literature.
Download or read book Carbon Nanotubes written by Mohamed Berber and published by BoD – Books on Demand. This book was released on 2016-07-20 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows the recent advances of the applications of carbon nanotubes (CNTs), in particular, the polymer functionalized carbon nanotubes. It also includes a comprehensive description of carbon nanotubes' preparation, properties, and characterization. Therefore, we have attempted to provide detailed information about the polymer-carbon nanotube composites. With regard to the unique structure and properties of carbon nanotubes, a series of important findings have been reported. The unique properties of carbon nanotubes, including thermal, mechanical, and electrical properties, after polymer functionalization have been documented in detail. This book comprises 18 chapters. The chapters include different applications of polymer functionalization CNTs, e.g. photovoltaic, biomedical, drug delivery, gene delivery, stem cell therapy, thermal therapy, biological detection and imaging, electroanalytical, energy, supercapacitor, and gas sensor applications.
Download or read book Carbon Nanotube Reinforced Composites written by Sie Chin Tjong and published by John Wiley & Sons. This book was released on 2009-04-08 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a broad insight into the potential applications of carbon nanotubes with metals and ceramic materials as a matrix, this book focuses on the preparation and the microstructural, physical, and mechanical characterizations of such novel nanocomposites. It features information on current synthesis and structure-property-relationships of metals and ceramics reinforced with CNT, organizing the vast array of surveys scattered throughout the literature in a single monograph. With its laboratory protocols and data tables this is invaluable reading for research workers and academics, as well as for applied scientists and industry personnel.
Download or read book Carbon Nanotubes and Graphene written by Kazuyoshi Tanaka and published by Newnes. This book was released on 2014-07-10 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotubes and Graphene is a timely second edition of the original Science and Technology of Carbon Nanotubes. Updated to include expanded coverage of the preparation, purification, structural characterization, and common application areas of single- and multi-walled CNT structures, this work compares, contrasts, and, where appropriate, unitizes CNT to graphene. This much expanded second edition reference supports knowledge discovery, production of impactful carbon research, encourages transition between research fields, and aids the formation of emergent applications. New chapters encompass recent developments in the theoretical treatments of electronic and vibrational structures, and magnetic, optical, and electrical solid-state properties, providing a vital base to research. Current and potential applications of both materials, including the prospect for large-scale synthesis of graphene, biological structures, and flexible electronics, are also critically discussed. Updated discussion of properties, structure, and morphology of biological and flexible electronic applications aids fundamental knowledge discovery Innovative parallel focus on nanotubes and graphene enables you to learn from the successes and failures of, respectively, mature and emergent partner research disciplines High-quality figures and tables on physical and mathematical applications expertly summarize key information – essential if you need quick, critically relevant data
Download or read book Constitutive Modeling of Nanotube reinforced Polymer Composite Systems written by Gregory M. Odegard and published by . This book was released on 2001 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this study, a technique has been proposed for developing constitive models for polymer composite systems reinforced with single-walled carbon nanotubes (SWNT). Since the polymer molecules are on the same size scale as the nanotubes, the interaction at the polymer/nanotube interface is highly dependent on the local molecular structure and bonding. At these small length scales, the lattice structures of the nanotube and polymer chains cannot be be considered continuous, and the bulk mechanical properties of the SWNT/polymer composites can no longer be determined through traditional micromechanical approaches that are formulated using continuum mechanics. It is proposed herein that the nanotube, the local polymer near the nanotube, and the nanotube/polymer interface can be modeled as an effective continuum fiber using an equivalent-continuum modeling method.
Download or read book Multifunctional Polymer Nanocomposites written by Jinsong Leng and published by CRC Press. This book was released on 2010-12-21 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: The novel properties of multifunctional polymer nanocomposites make them useful for a broad range of applications in fields as diverse as space exploration, bioengineering, car manufacturing, and organic solar cell development, just to name a few. Presenting an overview of polymer nanocomposites, how they compare with traditional composites, and th
Download or read book Reinforced Polymer Composites written by Pramendra K. Bajpai and published by John Wiley & Sons. This book was released on 2019-08-13 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents state-of-the-art processing techniques and readily applicable knowledge on processing of polymer composites The book presents the advancement in the field of reinforced polymer composites with emphasis on manufacturing techniques, including processing of different reinforced polymer composites, secondary processing of green composites, and post life cycle processing. It discusses the advantages and limitations of each processing method and the effect of processing parameters on the overall performance of the composites. Characterization and applications of reinforced polymer composites are also introduced. Reinforced Polymer Composites: Processing, Characterization and Post Life Cycle Assessment starts off by providing readers with a comprehensive overview of the field. It then introduces them to the fabrication of both short fiber/filler reinforced polymer composites and laminated reinforced polymer composites. Next, it takes them through the processing of polymer-based nanocomposites; the many advances in curing methods of reinforced polymer composites; and post life cycle processing, re-processing, and disposal mechanisms of reinforced polymer composites. Numerous other chapters cover: synthetic versus natural fiber reinforced plastics; characterization techniques of reinforced plastics; friction and wear analysis of reinforced plastics; secondary processing of reinforced plastics; and applications of reinforced plastics. -Presents the latest development in materials, processing, and characterization techniques, as well as applications of reinforced polymer composites -Guides users in choosing the best processing methods to produce polymer composites and successfully manufacture high quality products -Assists academics in sorting out basic research questions and helps those in industry manufacture products, such as marine, automotive, aerospace, and sport goods Reinforced Polymer Composites: Processing, Characterization and Post Life Cycle Assessment is an important book for materials scientists, polymer chemists, chemical engineers, process engineers, and anyone involved in the chemical or plastics technology industry.
Download or read book Carbon Nanotube Based Composites written by Antonio Pantano and published by Smithers Rapra. This book was released on 2012-09-28 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) have amazing properties and a key way to take advantage of this is by incorporating nanotubes into a matrix to build composite materials. The best candidates for this task are undoubtedly polymers. Almost every characteristic of a polymer can be significantly enhanced by adding carbon nanotubes and as a result, new potential applications of carbon nanotube enhanced polymer composites are discovered every day. However, before carbon nanotube enhanced polymer composites become commonplace there are some tough challenges that need to be overcome. This book reviews the status of worldwide research in both single-walled and multi-walled carbon nanotube based composites. It serves as a practical guide on carbon nanotube based composites and a reference to students and researchers from the academia and industry.
Download or read book Handbook of Carbon Nanotubes written by Jiji Abraham and published by Springer Nature. This book was released on 2022-11-16 with total page 2099 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook covers the fundamentals of carbon nanotubes (CNT), their composites with different polymeric materials (both natural and synthetic) and their potential advanced applications. Three different parts dedicated to each of these aspects are provided, with chapters written by worldwide experts in the field. It provides in-depth information about this material serving as a reference book for a broad range of scientists, industrial practitioners, graduate and undergraduate students, and other professionals in the fields of polymer science and engineering, materials science, surface science, bioengineering and chemical engineering. Part 1 comprises 22 chapters covering early stages of the development of CNT, synthesis techniques, growth mechanism, the physics and chemistry of CNT, various innovative characterization techniques, the need of functionalization and different types of functionalization methods as well as the different properties of CNT. A full chapter is devoted to theory and simulation aspects. Moreover, it pursues a significant amount of work on life cycle analysis of CNT and toxicity aspects. Part 2 covers CNT-based polymer nanocomposites in approximately 23 chapters. It starts with a short introduction about polymer nanocomposites with special emphasis on CNT-based polymer nanocomposites, different manufacturing techniques as well as critical issues concerning CNT-based polymer nanocomposites. The text deeply reviews various classes of polymers like thermoset, elastomer, latex, amorphous thermoplastic, crystalline thermoplastic and polymer fibers used to prepare CNT based polymer composites. It provides detailed awareness about the characterization of polymer composites. The morphological, rheological, mechanical, viscoelastic, thermal, electrical, electromagnetic shielding properties are discussed in detail. A chapter dedicated to the simulation and multiscale modelling of polymer nanocomposites is an additional attraction of this part of the Handbook. Part 3 covers various potential applications of CNT in approximately 27 chapters. It focuses on individual applications of CNT including mechanical applications, energy conversion and storage applications, fuel cells and water splitting, solar cells and photovoltaics, sensing applications, nanofluidics, nanoelectronics and microelectronic devices, nano-optics, nanophotonics and nano-optoelectronics, non-linear optical applications, piezo electric applications, agriculture applications, biomedical applications, thermal materials, environmental remediation applications, anti-microbial and antibacterial properties and other miscellaneous applications and multi-functional applications of CNT based polymer nanocomposites. One chapter is fully focussed on carbon nanotube research developments: published papers and patents. Risks associated with carbon nanotubes and competitive analysis of carbon nanotubes with other carbon allotropes are also addressed in this Handbook.
Download or read book Proceedings of the Scientific Practical Conference Research and Development 2016 written by K. V. Anisimov and published by Springer. This book was released on 2017-12-04 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book relates to the III Annual Conference hosted by The Ministry of Education and Science of the Russian Federation in December 2016. This event has summarized, analyzed and discussed the interim results, academic outputs and scientific achievements of the Russian Federal Targeted Programme “Research and Development in Priority Areas of Development of the Russian Scientific and Technological Complex for 2014–2020.” It contains 75 selected papers from 6 areas considered priority by the Federal Targeted Programme: computer science, ecology & environment sciences; energy and energy efficiency; lifesciences; nanoscience & nanotechnology and transport & communications. The chapters report the results of the 3-years research projects supported by the Programme and finalized in 2016.
Download or read book Nanotechnology in Civil Infrastructure written by Kasthurirangan Gopalakrishnan and published by Springer Science & Business Media. This book was released on 2011-03-31 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology in Civil Infrastructure is a state-of-the art reference source describing the latest developments in nano-engineering and nano-modification of construction materials to improve the bulk properties, development of sustainable, intelligent, and smart concrete materials through the integration of nanotechnology based self-sensing and self-powered materials and cyber infrastructure technologies, review of nanotechnology applications in pavement engineering, development of novel, cost-effective, high-performance and long-lasting concrete products and processes through nanotechnology-based innovative processing of cement and cement paste, and advanced nanoscience modeling, visualization, and measurement systems for characterizing and testing civil infrastructure materials at the nano-scale. Researchers, practitioners, undergraduate and graduate students engaged in nanotechnology related research will find this book very useful.
Download or read book Carbon Nanotubes written by Siva Yellampalli and published by BoD – Books on Demand. This book was released on 2011-08-17 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer nanocomposites are a class of material with a great deal of promise for potential applications in various industries ranging from construction to aerospace. The main difference between polymeric nanocomposites and conventional composites is the filler that is being used for reinforcement. In the nanocomposites the reinforcement is on the order of nanometer that leads to a very different final macroscopic property. Due to this unique feature polymeric nanocomposites have been studied exclusively in the last decade using various nanofillers such as minerals, sheets or fibers. This books focuses on the preparation and property analysis of polymer nanocomposites with CNTs (fibers) as nano fillers. The book has been divided into three sections. The first section deals with fabrication and property analysis of new carbon nanotube structures. The second section deals with preparation and characterization of polymer composites with CNTs followed by the various applications of polymers with CNTs in the third section.
Download or read book 3D Fibre Reinforced Polymer Composites written by L. Tong and published by Elsevier. This book was released on 2002-11-20 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fibre reinforced polymer (FRP) composites are used in almost every type of advanced engineering structure, with their usage ranging from aircraft, helicopters and spacecraft through to boats, ships and offshore platforms and to automobiles, sports goods, chemical processing equipment and civil infrastructure such as bridges and buildlings. The usage of FRP composites continues to grow at an impessive rate as these materials are used more in their existing markets and become established in relatively new markets such as biomedical devices and civil structures. A key factor driving the increased applications of composites over the recent years is the development of new advanced forms of FRP materials. This includes developments in high performance resin systems and new styles of reinforcement, such as carbon nanotubes and nanoparticles. This book provides an up-to-date account of the fabrication, mechanical properties, delamination resistance, impact tolerance and applications of 3D FRP composites. The book focuses on 3D composites made using the textile technologies of weaving, braiding, knitting and stiching as well as by z-pinning.