Download or read book Carbon Nanotubes for a Green Environment written by Shrikaant Kulkarni and published by CRC Press. This book was released on 2022-06-30 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotubes for a Green Environment: Balancing the Risks and Rewards describes the synthesis, characterization, and unique applications of undoped and doped carbon nanotubes as well as hybrids of them with grapheme or nanocomposites, focusing on green aspects of carbon nanotube applications. The volume shows new approaches used for tapping the potential and promise of key materials in isolation or combined with other materials. The research-oriented chapters highlight a spectrum of applications of carbon nanotubes as novel materials for energy storage as well as for environmental remediation, wastewater treatment, green health care products, and more. Chapters explore the use of carbon nanotubes for remediation methods for wastewater treatment such as by using graphene oxide-carbon nanotube composites and by applying undoped and doped carbon nanotubes for removing contaminates. The book also looks at the application of carbon nanotubes for enhanced oil recovery and for heavy metal separation. Other chapters look at the rheological behavior of carbon nanotubes-based materials and their role in processing for various products, the thermal and electrical transport in carbon nanotubes composites, carbon nanotubes-based composite materials for electromagnetic shielding applications. The biomedical applications of carbon nanotube-based nanomaterials also explored, such as FTIR spectroscopy.

Download or read book Carbon Nanomaterials for Agri food and Environmental Applications written by Kamel A Abd-Elsalam and published by Elsevier. This book was released on 2019-11-13 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanomaterials for Agri-food and Environmental Applications discusses the characterization, processing and applications of carbon-based nanostructured materials in the agricultural and environmental sectors. Sections discuss the synthesis and characterization of carbon nanotubes, the technological developments in environmental applications of carbon-based nanomaterials, and agri-food applications. The book also covers the toxic effects of engineered carbon nanoparticles on the environment, and in plants and animals. Finally, quality control and risk management are addressed to assess health and environmental risks. This is an applicable book for graduate students, researchers and those in industrial sectors of science and technology who want to learn more about carbon nanomaterials.

Download or read book Carbon Nanotubes for a Green Environment written by Shrikaant Kulkarni and published by Apple Academic Press. This book was released on 2024-08-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotubes for a Green Environment: Balancing the Risks and Rewards describes the synthesis, characterization, and unique applications of undoped and doped carbon nanotubes as well as hybrids of them with grapheme or nanocomposites, focusing on green aspects of carbon nanotube applications. The volume shows new approaches used for tapping the potential and promise of key materials in isolation or combined with other materials. The research-oriented chapters highlight a spectrum of applications of carbon nanotubes as novel materials for energy storage as well as for environmental remediation, wastewater treatment, green health care products, and more. Chapters explore the use of carbon nanotubes for remediation methods for wastewater treatment such as by using graphene oxide-carbon nanotube composites and by applying undoped and doped carbon nanotubes for removing contaminates. The book also looks at the application of carbon nanotubes for enhanced oil recovery and for heavy metal separation. Other chapters look at the rheological behavior of carbon nanotubes-based materials and their role in processing for various products, the thermal and electrical transport in carbon nanotubes composites, carbon nanotubes-based composite materials for electromagnetic shielding applications. The biomedical applications of carbon nanotube-based nanomaterials also explored, such as FTIR spectroscopy.

Download or read book Carbon based Polymer Nanocomposites for Environmental and Energy Applications written by Ahmad Fauzi Ismail and published by Elsevier. This book was released on 2018-03-28 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon-Based Polymer Nanocomposites for Environmental and Energy Applications provides the fundamental physico-chemical characterizations of recently explored carbon-based polymer nanocomposites, such as carbon nanotubes, graphene and its derivatives, nanodiamond, fullerenes and other nano-sized carbon allotropes. The book also covers the applications of carbon-based polymer nanocomposite in the environmental and energy fields. Topics range from the various approaches that have been explored and developed for the fabrication of carbon-based polymer nanocomposite, to their applications in tackling environmental and energy related issues. - Provides a clear picture of the current state-of-the-art and future trends in carbon-based polymer nanomaterials - Explains the interactions between nanofiller-polymer matrices and mechanisms related to applications in environmental pollution and energy shortage - Includes computational and experimental studies of the physical and chemical properties of carbon-based polymer nanocomposites - Features chapters written by world leading experts

Download or read book Emerging Carbon Based Nanocomposites for Environmental Applications written by Ajay Kumar Mishra and published by John Wiley & Sons. This book was released on 2020-09-29 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a comprehensive deep-dive into the developments and advancements of emerging carbon-based nanocomposites for wastewater applications. Science and technology development are tackling one of the world's most pressing concerns—water contamination and effective treatment. Carbon-based nanocomposites have emerged as one of the leading materials in this treatment push because of their properties and high ability for the catalytic degradation of contaminants from aqueous segments. The 10 chapters in this timely book cover the follows areas: Carbon-based nanocomposites for remediation of heavy metals and organic pollutants from wastewater Functional green carbon nanocomposites for heavy-metal treatment in water Green nanocomposites and applications in environmentally-friendly carbon nanomaterials Carbon-based nanocomposites as heterogeneous catalysts for organic reactions in environment-friendly solvents Carbon-based polymer nanocomposite applications Biochar-based adsorbents for the removal of organic pollutants from aqueous systems Carbon nanomaterial-based green nanocomposites The removal of trihalomethanes from water using nanofiltration membranes Nanocomposite materials as electrode materials in microbial fuel cells for the removal of water pollutants Plasmonic smart nanosensors for the determination of environmental pollutants.

Download or read book Environmental Chemistry for a Sustainable World written by Eric Lichtfouse and published by Springer Science & Business Media. This book was released on 2011-11-27 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental chemistry is a fast developing science aimed at deciphering fundamental mechanisms ruling the behaviour of pollutants in ecosystems. Applying this knowledge to current environmental issues leads to the remediation of environmental media, and to new, low energy, low emission, sustainable processes. Nanotechnology applications for alternative energies such as solar power, fuel cells, hydrogen and lithium batteries are reviewed in the first section. Recent investigations on carbon nanotubes, nanocatalysts and cyclodextrins disclose unprecedented techniques to monitor and clean pollutants such as greenhouse gases, heavy metals, pesticides, pathogens occurring in water, air and soil. The second section reviews the risks for human health of critical pollutants such as endocrine disruptors, dioxins and heavy metals contaminating seafood and sediments. An exhaustive review of DDT isomers reveals unexpected mechanisms of DDT transfer to fishes. A chapter on pollutant geochronology using river sedimentary archives provides novel insights on pollution history since the beginning of the anthropocene. This book will be a valuable source of information for engineers and students developing novel applied techniques to monitor and clean pollutants in air, wastewater, soils and sediments.

Download or read book Carbon Based Material for Environmental Protection and Remediation written by Mattia Bartoli and published by BoD – Books on Demand. This book was released on 2020-08-19 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon-Based Material for Environmental Protection and Remediation presents an overview of carbon-based technologies and processes, and examines their usefulness and efficiency for environmental preservation and remediation. Chapters cover topics ranging from pollutants removal to new processes in materials science. Written for interested readers with strong scientific and technological backgrounds, this book will appeal to scientific advisors at private companies, academics, and graduate students.

Download or read book Metal Oxide Nanocomposites written by B. Raneesh and published by John Wiley & Sons. This book was released on 2021-02-17 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanocomposites: Synthesis and Applications summarizes many of the recent research accomplishments in the area of metal oxide-based nanocomposites. This book focussing on the following topics: Nanocomposites preparation and characterization of metal oxide nanocomposites; synthesis of core/shell metal oxide nanocomposites; multilayer thin films; sequential assembly of nanocomposite materials; semiconducting polymer metal oxide nanocomposites; graphene-based metal and metal oxide nanocomposites; carbon nanotube–metal–oxide nanocomposites; silicon mixed oxide nanocomposites; gas semiconducting sensors based on metal oxide nanocomposites; metal ]organic framework nanocomposite for hydrogen production and nanocomposites application towards photovoltaic and photocatalytic.

Download or read book Syntheses and Applications of Carbon Nanotubes and Their Composites written by Satoru Suzuki and published by BoD – Books on Demand. This book was released on 2013-05-09 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes are rolled up graphene sheets with a quasi-one-dimensional structure of nanometer-scale diameter. In these last twenty years, carbon nanotubes have attracted much attention from physicists, chemists, material scientists, and electronic device engineers, because of their excellent structural, electronic, optical, chemical and mechanical properties. More recently, demand for innovative industrial applications of carbon nanotubes is increasing. This book covers recent research topics regarding syntheses techniques of carbon nanotubes and nanotube-based composites, and their applications. The chapters in this book will be helpful to many students, engineers and researchers working in the field of carbon nanotubes.

Download or read book Carbon Nanotubes for Energy and Environmental Applications written by Soney C. George and published by CRC Press. This book was released on 2022-10-27 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book, Carbon Nanotubes for Energy and Environmental Applications, covers the timely issue of green applications of carbon nanotubes. It covers the diverse usages of carbon nanotubes for the sensing of environmentally hazardous chemicals, for water purification, for the protection of the environment, and for new energy applications. The development of highly sensitive CNT-based gas sensors for air pollution monitoring, for green synthesis of carbon nanotubes, and for green energy applications are discussed in this volume. The diverse topics in the volume include nanodiamonds for energy storage, new lubricant additives that enhance energy efficiency, how carbon nanotubes can be applied in the food and agricultural sectors, the use of CNTs in water purification and desalination, carbon nanotubes-based electrochemical sensors for environmentally hazardous chemicals, and much more. This timely book addresses a need of the hour and will provide valuable for environmentally conscious industry professionals, faculty and students, and researchers in materials science, engineering, physics, and chemistry with interest in nanomaterials.

Download or read book Graphene Carbon Nanotube Hybrids for Energy and Environmental Applications written by Wei Fan and published by Springer. This book was released on 2016-11-09 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes various carbon nanomaterials and their unique properties, and offers a detailed introduction to graphene–carbon nanotube (CNT) hybrids. It demonstrates strategies for the hybridization of CNTs with graphene, which fully utilize the synergistic effect between graphene and CNTs. It also presents a wide range of applications of graphene–CNT hybrids as novel materials for energy storage and environmental remediation. Further, it discusses the preparation, structures and properties of graphene–CNT hybrids, providing interesting examples of three types of graphene–CNT hybrids with different nanostructures. This book is of interest to a wide readership in various fields of materials science and engineering.

Download or read book Carbon Nanotubes written by Ann Rose Abraham and published by CRC Press. This book was released on 2022-10-06 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book discusses a selection of advanced topics on carbon nanotubes—their extraordinary properties, structure, design, fabrication, development, engineering, functionalization, carbon nanotube enabled nanocomposites, characterization, and, moreover, their utility in many applications. The volume highlights the amazing potential of advanced CNT composites in automotive, aeronautics, spacecrafts, transistors replacing Si electronics, energy, purification, hydrogen storage, tissue regeneration, electrochemical supercapacitors, sensing, biomedical applications, agriculture, energy, and technical applications. The book specifically discusses the applications of carbon nanotubes for a greener environment, as well as applications for biomedical uses, in drug delivery, and in display technology. It also explores the uses of CNTs in the energy and aerospace industries, such as for solar energy conversion, as a lubricant additive for enhancing energy efficiency, and more. Other chapters explore the potential of carbon nanotubes in hydrogen storage and carbon nanotube electronics.

Download or read book Metal Oxide Based Carbon Nanocomposites for Environmental Remediation and Safety written by Rayees Ahmad Zargar and published by CRC Press. This book was released on 2023-07-17 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on nanotechnology for the preparation of metal oxide–based carbon nanocomposite materials for environmental remediation. It analyses the use of nanomaterials for water, soil, and air solutions, emphasizing the environmental risks of pollution. It further explores how magnetic and activated carbon nanomaterials are being used for a sustainable environmental protection of water and soil, and detection of harmful gases. The status and major challenges of using carbon-based nanomaterials on a large scale are explained, supported by relevant case studies. Features: Exhaustively covers nanotechnology, metal oxide–carbon nanocomposites and their application in soil, water, and air treatments Explores pollutants nano-sensing and their remediation towards environmental safety Includes economics analysis and environmental aspects of metal oxide materials Describes why properties of oxide carbon–based nanomaterials are useful for environmental applications Discusses current case studies of remediation technologies This book is aimed at graduate students and researchers in nanotechnology, environmental technology, and remediation.

Download or read book Handbook of Carbon Nanotubes written by Jiji Abraham and published by Springer Nature. This book was released on 2022-11-16 with total page 2099 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook covers the fundamentals of carbon nanotubes (CNT), their composites with different polymeric materials (both natural and synthetic) and their potential advanced applications. Three different parts dedicated to each of these aspects are provided, with chapters written by worldwide experts in the field. It provides in-depth information about this material serving as a reference book for a broad range of scientists, industrial practitioners, graduate and undergraduate students, and other professionals in the fields of polymer science and engineering, materials science, surface science, bioengineering and chemical engineering. Part 1 comprises 22 chapters covering early stages of the development of CNT, synthesis techniques, growth mechanism, the physics and chemistry of CNT, various innovative characterization techniques, the need of functionalization and different types of functionalization methods as well as the different properties of CNT. A full chapter is devoted to theory and simulation aspects. Moreover, it pursues a significant amount of work on life cycle analysis of CNT and toxicity aspects. Part 2 covers CNT-based polymer nanocomposites in approximately 23 chapters. It starts with a short introduction about polymer nanocomposites with special emphasis on CNT-based polymer nanocomposites, different manufacturing techniques as well as critical issues concerning CNT-based polymer nanocomposites. The text deeply reviews various classes of polymers like thermoset, elastomer, latex, amorphous thermoplastic, crystalline thermoplastic and polymer fibers used to prepare CNT based polymer composites. It provides detailed awareness about the characterization of polymer composites. The morphological, rheological, mechanical, viscoelastic, thermal, electrical, electromagnetic shielding properties are discussed in detail. A chapter dedicated to the simulation and multiscale modelling of polymer nanocomposites is an additional attraction of this part of the Handbook. Part 3 covers various potential applications of CNT in approximately 27 chapters. It focuses on individual applications of CNT including mechanical applications, energy conversion and storage applications, fuel cells and water splitting, solar cells and photovoltaics, sensing applications, nanofluidics, nanoelectronics and microelectronic devices, nano-optics, nanophotonics and nano-optoelectronics, non-linear optical applications, piezo electric applications, agriculture applications, biomedical applications, thermal materials, environmental remediation applications, anti-microbial and antibacterial properties and other miscellaneous applications and multi-functional applications of CNT based polymer nanocomposites. One chapter is fully focussed on carbon nanotube research developments: published papers and patents. Risks associated with carbon nanotubes and competitive analysis of carbon nanotubes with other carbon allotropes are also addressed in this Handbook.

Download or read book Carbon Nanotubes for Biomedical Applications written by Rüdiger Klingeler and published by Springer Science & Business Media. This book was released on 2011-02-09 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the potential of multi-functional carbon nanotubes for biomedical applications. It combines contributions from chemistry, physics, biology, engineering, and medicine. The complete overview of the state-of-the-art addresses different synthesis and biofunctionalisation routes and shows the structural and magnetic properties of nanotubes relevant to biomedical applications. Particular emphasis is put on the interaction of carbon nanotubes with biological environments, i.e. toxicity, biocompatibility, cellular uptake, intracellular distribution, interaction with the immune system and environmental impact. The insertion of NMR-active substances allows diagnostic usage as markers and sensors, e.g. for imaging and contactless local temperature sensing. The potential of nanotubes for therapeutic applications is highlighted by studies on chemotherapeutic drug filling and release, targeting and magnetic hyperthermia studies for anti-cancer treatment at the cellular level.

Download or read book Nanomaterials for Environmental Protection written by Boris I. Kharisov and published by John Wiley & Sons. This book was released on 2014-08-27 with total page 1449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is divided into four main sections thoroughly analyzing the use of nanomaterials for water, air and soil solutions, and emphasizing environmental risks. Providing background on nanomaterials' two-decade study, it discusses the characterization and application of unconventional disinfectants, called antimicrobial nanomaterials, which fall into three categories and, while seemingly harmless, have potential hazards if applied improperly. Special attention is given to the process of remediation, synthetics techniques, and properties of nanomaterials, with examples to which new and trained readers in the field can relate and understand. an interdisciplinary approach, aimed at scientists in physical chemistry, nanotechnology, and environmental sciences includes applications of non-conventional techniques in environmental protection furthers the development of applied nanoscience and nanotechnology suggests new industrial projects and university courses addressing nanotechnology in and for the environment includes applications for water, air and soil protection

Download or read book Nitroarenes written by Paul C. Howard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prior to 1979, consideration of the problem of the carcinogenicity of the aromatic amine class of chemicals took place primarily in poster sessions and symposia of annual meetings of the American Association for Cancer Research and analogous international associations. In November 1979 the first meeting concerned with the aromatic amines was held in Rockville, Haryland under primary sponsorship of the National Cancer Institute. The proceedings from this meeting were published as Monograph 58 of the Journal of the National Cancel' Institute in 1981. The second meeting in this series, the Second International Conference on N-Substituted Aryl Compounds, was held in March/April of 1982 in Hot Springs, Arkansas. The National Cancer Institute and The National Center for Toxicological Research were the primary sponsors of this meeting. The proceedings were published as Volume 49 of the journal En-vil'onmental Health Perspectives in 1983. The third meeting in this series was held in April of 1987 at the Dearborn Hyatt in Dearborn, Michigan. The principal sponsor of this meeting was the Heyer L. Pre ntis Comprehensive Cancer Center of Metropolitan Detroit. The proceedings, Carcinogenic and Mutagenic Responses to Aromatic Amines and Nitroal'enes, were published in 1987 by Elsevier Press. The fourth meeting was held in Cleveland, Ohio, on July 15-19, 1989.