Download or read book Calculation of the Parameters of Equilibrium Equations Between Liquid Phases in Systems with the Immiscibility Range in the Liquid Condition written by Khristenko, V and published by . This book was released on 2002 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Liquid liquid Equilibria written by Josef P. Novák and published by Elsevier Publishing Company. This book was released on 1987 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: While a satisfactory description of liquid-vapour equilibria in binary and multi-component systems had been developed by the end of the fifties, a similar situation has only been attained for liquid-liquid equilibria in the last ten years. There are several reasons for this, the most important of which is the necessity to employ more complex thermodynamic models for a quantitative description of liquid-liquid equilibria. These models require very sophisticated calculation techniques that cannot be carried out without the assistance of a computer. The authors have attempted to provide a theoretical description of liquid-liquid equilibria at a level permitting routine chemical engineering applications similar to those common for liquid-vapour equilibria. Consequently, a great deal of attention is paid to the calculation of parameters for heterogeneous and homogeneous binary systems, and to the qualitative evaluation of the suitability of the most frequently used thermodynamic models.
Download or read book Phase Equilibrium in Mixtures written by M. B. King and published by Elsevier. This book was released on 2013-10-22 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase Equilibrium in Mixtures deals with phase equilibrium and the methods of correlating, checking, and predicting phase data. Topics covered range from latent heat and vapor pressure to dilute solutions, ideal and near-ideal solutions, and consistency tests. Molecular considerations and their use for the prediction and correlation of data are also discussed. Comprised of nine chapters, this volume begins with an introduction to the role of thermodynamics and the criteria for equilibrium between phases, along with fugacity and the thermodynamic functions of mixing. The discussion then turns to some of the phase phenomena which may be encountered in chemical engineering practice; methods of correlating and extending vapor pressure data and practical techniques for calculating latent heats from these data; the behavior of dilute solutions both at low and high pressures for reacting and non-reacting systems; and the behavior of ideal and near-ideal solutions. The remaining chapters explore non-ideal solutions at normal pressures; practical methods for testing the thermodynamic consistency of phase data; and the extent to which the broad aspects of phase behavior may be interpreted in the light of simple molecular considerations. This book is intended primarily for graduate chemical engineers but should also be of interest to those graduates in physics or chemistry who need to use phase equilibrium data.
Download or read book Applied Thermodynamics of Fluids written by Anthony R. Goodwin and published by Royal Society of Chemistry. This book was released on 2010-11-01 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published under the auspices of both IUPAC and its affiliated body, the International Association of Chemical Thermodynamics (IACT), this book will serve as a guide to scientists or technicians who use equations of state for fluids. Concentrating on the application of theory, the practical use of each type of equation is discussed and the strengths and weaknesses of each are addressed. It includes material on the equations of state for chemically reacting and non-equilibrium fluids which have undergone significant developments and brings up to date the equations of state for fluids and fluid mixtures. Applied Thermodynamics of Fluids addresses the needs of practitioners within academia, government and industry by assembling an international team of distinguished experts to provide each chapter. The topics presented in the book are important to the energy business, particularly the hydrocarbon economy and the development of new power sources and are also significant for the application of liquid crystals and ionic liquids to commercial products. This reference will be useful for post graduate researchers in the fields of chemical engineering, mechanical engineering, chemistry and physics.
Download or read book High Pressure Fluid Phase Equilibria written by Ulrich K Deiters and published by Elsevier. This book was released on 2023-12-01 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: High pressures play a more and more important role in modern technology. Examples are the supercritical fluid extraction of medical drugs and dyes from biological material, the handling of compressed or liquefied gases (including natural gas or hydrogen), the operation of modern thermal power plants, or various technical processes for controlled particle formation. High-Pressure Fluid Phase Equilibria, Second Edition enables understanding of the complicated phase behaviour that fluid or fluid mixtures (liquids, gases, or supercritical phases) can exhibit at elevated pressures. The underlying thermodynamic equations are explained, and robust algorithms for the computation of such equilibria (including solid–fluid equilibria) are proposed. Since the publication of the first edition of this book there have been many new developments, for instance differential equation methods for the computation of phase equilibria, accurate numerical differentiation, high-precision equations of state (e.g., the GERG model). Moreover, more detail and explanation has been added on important topics that were only briefly examined in the original book to better assist the reader, such as expansion processes and chemical reactions). The book remains invaluable as a single resource for grasping the intricacies of fluid phase behaviour. It enables readers to write or improve their own computer programs for the calculation of phase equilibria. It will appeal to graduate students of chemical engineering and university research staff involved in chemical engineering of supercritical fluids or the physical chemistry of fluids; the book can also serve as the basis of lectures or advanced students’ seminars. Comprehensively presents the complex world of phase equilibria (binary and ternary) and the various methods for computing phase equilibria, whilst carefully considering the relevant pressure and temperature ranges Introduces phase diagram classes, how to recognize them, and how to identify their characteristic features Presents rational nomenclature of binary fluid phase diagrams Includes problems and solutions for self-testing, exercises, or seminars New to this Edition: Presentation of the phase equilibria models is extended and expanded There are now more descriptions on more equations of state, especially the PCSAFT EoS Features new chapter on nonisothermal applications and chemically reactive systems and extensive updates and additions to all existing chapters
Download or read book Applied Parameter Estimation for Chemical Engineers written by Peter Englezos and published by CRC Press. This book was released on 2000-10-12 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book determines adjustable parameters in mathematical models that describe steady state or dynamic systems, presenting the most important optimization methods used for parameter estimation. It focuses on the Gauss-Newton method and its modifications for systems and processes represented by algebraic or differential equation models.
Download or read book Phase Equilibria in Chemical Engineering written by Stanley M. Walas and published by Butterworth-Heinemann. This book was released on 1985 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase Equilibria in Chemical Engineering written by Stanley M. Walas and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase Equilibria in Chemical Engineering is devoted to the thermodynamic basis and practical aspects of the calculation of equilibrium conditions of multiple phases that are pertinent to chemical engineering processes. Efforts have been made throughout the book to provide guidance to adequate theory and practice. The book begins with a long chapter on equations of state, since it is intimately bound up with the development of thermodynamics. Following material on basic thermodynamics and nonidealities in terms of fugacities and activities, individual chapters are devoted to equilibria primarily between pairs of phases. A few topics that do not fit into these categories and for which the state of the art is not yet developed quantitatively have been relegated to a separate chapter. The chapter on chemical equilibria is pertinent since many processes involve simultaneous chemical and phase equilibria. Also included are chapters on the evaluation of enthalpy and entropy changes of nonideal substances and mixtures, and on experimental methods. This book is intended as a reference and self-study as well as a textbook either for full courses in phase equilibria or as a supplement to related courses in the chemical engineering curriculum. Practicing engineers concerned with separation technology and process design also may find the book useful.
Download or read book Halogenated Hydrocarbons written by A.L. Horvath and published by CRC Press. This book was released on 2020-11-25 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book promotes a basic understanding of the concept of solubility and miscibility between halogenated hydrocarbons and water. It points out the regularities existing between solubility and physical properties of solute and solvent. The book is valuable to chemists and chemical engineers.
Download or read book Bulletin of Chemical Thermodynamics written by and published by . This book was released on 1978 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase Equilibria written by Andreas L. Muhlbauer and published by Taylor & Francis. This book was released on 2023-02-03 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work provides coverage of experimental and theoretical procedures for vapour-liquid equilibria (VLE). A survey of the different models and approaches in recent literature enables the reader to choose the appropriate action.
Download or read book Glass Science written by Wilhelm Eitel and published by Elsevier. This book was released on 2012-12-02 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicate Science, Volume VII: Glass Science reviews the advances made in silicate research from 1960 through 1970, with emphasis on glass science. Although much of the discussion is still based on the classic physical chemistry theories, an attempt is made to introduce the essential solid-state physics principles and to show how they can be applied to non-crystalline solids. The properties of many diverse vitreous materials are presented. Comprised of seven chapters, this volume begins with an overview of glass-forming elements and their compounds, paying particular attention to their general character as glass-forming phases. The properties of of chalcogenide glasses and non-silicate oxide glasses are also discussed. The next chapters focus on the viscosity of molten glass; the electrolytic conductivity of silicates; the specific volumina of glass melts; and specific applications of infrared spectroscopy to solving structure problems. The physical properties of glass, varied by thermal actions in the transformation and annealing ranges, are considered as well. The final chapter is devoted to miscellaneous additional constitution problems, with particular reference to the volatilization of lead silicate glasses from glass melts and vitreous semiconductors of chalcogenide glasses. This book will be of interest to mineralogists and crystallographers.
Download or read book Phase Equilibria written by Andre Muhlbauer and published by CRC Press. This book was released on 1997-09-01 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book provides, for the first time, a thorough survey of the techniques and equipment for both high- and low-pressure phase equilibrium measurement and addresses the equally challenging task of accurately modeling or predicting the equilibria. The book is unique because it combines in depth and authoritative coverage of both experimental and theoretical procedures in a single volume. Written as a reference for practicing engineers and scientists in the chemical engineering field, this book will also be useful as an advanced graduate-level text.
Download or read book Encyclopedia of Chemical Processing written by Sunggyu Lee and published by Taylor & Francis US. This book was released on 2006 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supplying nearly 350 expertly-written articles on technologies that can maximize and enhance the research and production phases of current and emerging chemical manufacturing practices and techniques, this second edition provides gold standard articles on the methods, practices, products, and standards recently influencing the chemical industries. New material includes: design of key unit operations involved with chemical processes; design, unit operation, and integration of reactors and separation systems; process system peripherals such as pumps, valves, and controllers; analytical techniques and equipment; current industry practices; and pilot plant design and scale-up criteria.
Download or read book Transport Phenomena in Dispersed Media written by G. I. Kelbaliyev and published by CRC Press. This book was released on 2019-09-26 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transport Phenomena in Dispersed Media addresses the main problems associated with the transfer of heat, mass and momentum. The authors focus on the analytical solutions of the mass and heat transfer equations; the theoretical problems of coalescence, coagulation, aggregation and fragmentation of dispersed particles; the rheology of structured aggregate and kinetically stable disperse systems; the precipitation of particles in a turbulent flow; the evolution of the distribution function; the stochastic counterpart of the mass transfer equations; the dissipation of energy in disperse systems; and many other problems that distinguish this book from existing publications. Key Selling Features Covers all technological processes taking place in the oil and gas complex, as well as in the petrochemical industry Presents new original solutions for calculating design as well as for the development and implementation of processes of chemical technology Organized to first provide an extensive review of each chapter topic, solve specific problems, and then review the solutions with the reader Contains complex mathematical expressions for practical calculations Compares results obtained on the basis of mathematical models with experimental data
Download or read book The Lattice Boltzmann Method written by Timm Krüger and published by Springer. This book was released on 2016-11-07 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to the theory, practice, and implementation of the Lattice Boltzmann (LB) method, a powerful computational fluid dynamics method that is steadily gaining attention due to its simplicity, scalability, extensibility, and simple handling of complex geometries. The book contains chapters on the method's background, fundamental theory, advanced extensions, and implementation. To aid beginners, the most essential paragraphs in each chapter are highlighted, and the introductory chapters on various LB topics are front-loaded with special "in a nutshell" sections that condense the chapter's most important practical results. Together, these sections can be used to quickly get up and running with the method. Exercises are integrated throughout the text, and frequently asked questions about the method are dealt with in a special section at the beginning. In the book itself and through its web page, readers can find example codes showing how the LB method can be implemented efficiently on a variety of hardware platforms, including multi-core processors, clusters, and graphics processing units. Students and scientists learning and using the LB method will appreciate the wealth of clearly presented and structured information in this volume.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1989 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.
