Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 32 (thesis year 1987) a total of 12,483 theses titles from 22 Canadian and 176 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 32 reports theses submitted in 1987, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.

Download or read book The International Journal of Applied Engineering Education written by and published by . This book was released on 1989 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Theoretical Chemical Engineering Abstracts written by and published by . This book was released on 1982 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A TEXTBOOK OF CHEMICAL ENGINEERING THERMODYNAMICS written by K. V. NARAYANAN and published by PHI Learning Pvt. Ltd.. This book was released on 2013-01-11 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed as an undergraduate-level textbook in Chemical Engineering, this student-friendly, thoroughly class-room tested book, now in its second edition, continues to provide an in-depth analysis of chemical engineering thermodynamics. The book has been so organized that it gives comprehensive coverage of basic concepts and applications of the laws of thermodynamics in the initial chapters, while the later chapters focus at length on important areas of study falling under the realm of chemical thermodynamics. The reader is thus introduced to a thorough analysis of the fundamental laws of thermodynamics as well as their applications to practical situations. This is followed by a detailed discussion on relationships among thermodynamic properties and an exhaustive treatment on the thermodynamic properties of solutions. The role of phase equilibrium thermodynamics in design, analysis, and operation of chemical separation methods is also deftly dealt with. Finally, the chemical reaction equilibria are skillfully explained. Besides numerous illustrations, the book contains over 200 worked examples, over 400 exercise problems (all with answers) and several objective-type questions, which enable students to gain an in-depth understanding of the concepts and theory discussed. The book will also be a useful text for students pursuing courses in chemical engineering-related branches such as polymer engineering, petroleum engineering, and safety and environmental engineering. New to This Edition • More Example Problems and Exercise Questions in each chapter • Updated section on Vapour–Liquid Equilibrium in Chapter 8 to highlight the significance of equations of state approach • GATE Questions up to 2012 with answers

Download or read book Gas Abstracts written by and published by . This book was released on 1989 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Chemical Engineering Calculations written by Nicholas P. Chopey and published by McGraw-Hill Professional Publishing. This book was released on 1994 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of the calculation procedures needed every day on the job by chemical engineers. Tables of Contents: Physical and Chemical Properties; Stoichiometry; Phase Equilibrium; Chemical-Reaction Equilibrium; Reaction Kinetics and Reactor Design; Flow of Fluids and Solids; Heat Transfer; Distillation; Extraction and Leaching; Crystallization; Filtration; Liquid Agitation; Size Reduction; Drying: Evaporation; Environmental Engineering in the Plant. Illustrations. Index.

Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2616 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Molecular Theory of Solutions written by Ilya Prigogine and published by . This book was released on 1957 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Introduction to Reservoir Simulation Using MATLAB GNU Octave written by Knut-Andreas Lie and published by Cambridge University Press. This book was released on 2019-08-08 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents numerical methods for reservoir simulation, with efficient implementation and examples using widely-used online open-source code, for researchers, professionals and advanced students. This title is also available as Open Access on Cambridge Core.

Download or read book STOICHIOMETRY AND PROCESS CALCULATIONS written by K. V. NARAYANAN and published by PHI Learning Pvt. Ltd.. This book was released on 2006-01-01 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is designed for undergraduate courses in chemical engineering and related disciplines such as biotechnology, polymer technology, petrochemical engineering, electrochemical engineering, environmental engineering, safety engineering and industrial chemistry. The chief objective of this text is to prepare students to make analysis of chemical processes through calculations and also to develop in them systematic problem-solving skills. The students are introduced not only to the application of law of combining proportions to chemical reactions (as the word ‘stoichiometry’ implies) but also to formulating and solving material and energy balances in processes with and without chemical reactions. The book presents the fundamentals of chemical engineering operations and processes in an accessible style to help the students gain a thorough understanding of chemical process calculations. It also covers in detail the background materials such as units and conversions, dimensional analysis and dimensionless groups, property estimation, P-V-T behaviour of fluids, vapour pressure and phase equilibrium relationships, humidity and saturation. With the help of examples, the book explains the construction and use of reference-substance plots, equilibrium diagrams, psychrometric charts, steam tables and enthalpy composition diagrams. It also elaborates on thermophysics and thermochemistry to acquaint the students with the thermodynamic principles of energy balance calculations. Key Features : • SI units are used throughout the book. • Presents a thorough introduction to basic chemical engineering principles. • Provides many worked-out examples and exercise problems with answers. • Objective type questions included at the end of the book serve as useful review material and also assist the students in preparing for competitive examinations such as GATE.

Download or read book Applied Chemical Engineering Thermodynamics written by Dimitrios P. Tassios and published by Springer. This book was released on 2013-12-19 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Chemical Engineering Thermodynamics provides the undergraduate and graduate student of chemical engineering with the basic knowledge, the methodology and the references he needs to apply it in industrial practice. Thus, in addition to the classical topics of the laws of thermodynamics,pure component and mixture thermodynamic properties as well as phase and chemical equilibria the reader will find: - history of thermodynamics - energy conservation - internmolecular forces and molecular thermodynamics - cubic equations of state - statistical mechanics. A great number of calculated problems with solutions and an appendix with numerous tables of numbers of practical importance are extremely helpful for applied calculations. The computer programs on the included disk help the student to become familiar with the typical methods used in industry for volumetric and vapor-liquid equilibria calculations.

Download or read book Chemical Engineering Thermodynamics written by RAO and published by Universities Press. This book was released on 1997 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermodynamic Models written by Michael L. Michelsen and published by . This book was released on 2007 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book VDI Heat Atlas written by VDI Gesellschaft and published by Springer Science & Business Media. This book was released on 2010-07-21 with total page 1608 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than 50 years, the Springer VDI Heat Atlas has been an indispensable working means for engineers dealing with questions of heat transfer. Featuring 50% more content, this new edition covers most fields of heat transfer in industrial and engineering applications. It presents the interrelationships between basic scientific methods, experimental techniques, model-based analysis and their transfer to technical applications.

Download or read book Equations of State and PVT Analysis written by Tarek Ahmed and published by Gulf Professional Publishing. This book was released on 2016-03-02 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the properties of a reservoir's fluids and creating a successful model based on lab data and calculation are required for every reservoir engineer in oil and gas today, and with reservoirs becoming more complex, engineers and managers are back to reinforcing the fundamentals. PVT (pressure-volume-temperature) reports are one way to achieve better parameters, and Equations of State and PVT Analysis, Second Edition, helps engineers to fine tune their reservoir problem-solving skills and achieve better modeling and maximum asset development. Designed for training sessions for new and existing engineers, Equations of State and PVT Analysis, Second Edition, will prepare reservoir engineers for complex hydrocarbon and natural gas systems with more sophisticated EOS models, correlations and examples from the hottest locations around the world such as the Gulf of Mexico, North Sea and China, and Q&A at the end of each chapter. Resources are maximized with this must-have reference. - Improve with new material on practical applications, lab analysis, and real-world sampling from wells to gain better understanding of PVT properties for crude and natural gas - Sharpen your reservoir models with added content on how to tune EOS parameters accurately - Solve more unconventional problems with field examples on phase behavior characteristics of shale and heavy oil

Download or read book Introduction to Chemical Engineering Computing written by Bruce A. Finlayson and published by John Wiley & Sons. This book was released on 2012-07-31 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Step-by-step instructions enable chemical engineers to master key software programs and solve complex problems Today, both students and professionals in chemical engineering must solve increasingly complex problems dealing with refineries, fuel cells, microreactors, and pharmaceutical plants, to name a few. With this book as their guide, readers learn to solve these problems using their computers and Excel®, MATLAB, Aspen Plus, and COMSOL Multiphysics. Moreover, they learn how to check their solutions and validate their results to make sure they have solved the problems correctly. Now in its Second Edition, Introduction to Chemical Engineering Computing is based on the author's firsthand teaching experience. As a result, the emphasis is on problem solving. Simple introductions help readers become conversant with each program and then tackle a broad range of problems in chemical engineering, including: Equations of state Chemical reaction equilibria Mass balances with recycle streams Thermodynamics and simulation of mass transfer equipment Process simulation Fluid flow in two and three dimensions All the chapters contain clear instructions, figures, and examples to guide readers through all the programs and types of chemical engineering problems. Problems at the end of each chapter, ranging from simple to difficult, allow readers to gradually build their skills, whether they solve the problems themselves or in teams. In addition, the book's accompanying website lists the core principles learned from each problem, both from a chemical engineering and a computational perspective. Covering a broad range of disciplines and problems within chemical engineering, Introduction to Chemical Engineering Computing is recommended for both undergraduate and graduate students as well as practicing engineers who want to know how to choose the right computer software program and tackle almost any chemical engineering problem.

Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors