Download or read book CAD Systems Using AI Techniques written by Gōtarō Odawara and published by North Holland. This book was released on 1989 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in VLSI technologies have allowed larger and more complex designs. CAD systems using Artificial Intelligence (AI) techniques play the most important role in their short-term realization. This book contains 27 research papers reporting on the various technical fields in VLSI CAD. It is a coordinated collection of papers from researchers in the USA, Europe and Japan. The main topics covered are logic design using AI techniques, and expert systems, every paper offering an effective solution applying AI techniques to difficult problems in the CAD field.
Download or read book Developing Collaborative CAD Systems Using AI Techniques written by Ming Xi Tang and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intelligent CAD Systems I written by Paul J.W. ten Hagen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: CAD (Computer Aided Design) technology is now crucial for every division of modern industry, from a viewpoint of higher productivity and better products. As technologies advance, the amount of information and knowledge that engineers have to deal with is constantly increasing. This results in seeking more advanced computer technology to achieve higher functionalities, flexibility, and efficient performance of the CAD systems. Knowledge engineering, or more broadly artificial intelligence, is considered a primary candidate technology to build a new generation of CAD systems. Since design is a very intellectual human activity, this approach seems to make sense. The ideas of intelligent CAD systems (ICAD) are now increasingly discussed everywhere. We can observe many conferences and workshops reporting a number of research efforts on this particular subject. Researchers are coming from computer science, artificial intelligence, mechanical engineering, electronic engineering, civil engineering, architectural science, control engineering, etc. But, still we cannot see the direction of this concept, or at least, there is no widely accepted concept of ICAD. What can designers expect from these future generation CAD systems? In which direction must developers proceed? The situation is somewhat confusing.
Download or read book Developing Expert CAD Systems written by V. Begg and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of CAD to electronics technology Computer-aided design (CAD) is one way of coping with the problem of how to design and build very complex systems. This problem is particularly acute in electronics technology. Designs are now (1984) said to be design-limited, rather than technology-limited. It can take months to generate a design for a chip, so that it might be obsolete before it can be manufactured. Manual design of large-scale integration (LSI) chips (circa 10,000 gates) is almost impossible. However, using current technology it is possible to produce chips having 250,000 gates. It is understandable, therefore, that there is great interest in improving existing CAD systems. Designers of CAD systems are concerned with formalizing and automating as much of the design task as possible. Automating design of any kind has long been acknowledged as a project fraught with intractable problems. A human designer has to have an understanding of the nature of the materials used in manufacture, a knowledge of common problems and well-tried solutions, and above all, creativity in producing new designs. Understanding, knowledge and creativity are three properties even the most artificially intelligent of computer programs have been entirely lacking in until very recently. Some people would deny computers these qualities entirely, on philosophical grounds (eg Dreyfus 1979; Searle 1981). There are few theories in cognitive psychology which can help.
Download or read book Intelligent CAD Systems III written by Paul J.W. ten Hagen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a selection of revised versions of papers presented at the Third Eurographics Workshop on Intelligent CAD Systems, which was held at Hotel Opduin on the island of Texel in The Netherlands, April 3-7, 1989. The workshop theme was Practical Experience and Evaluation. It included five paper presentation sessions, each followed by a discussion. The workshop closed with a general discussion. The book is therefore divided into five parts: design process, system architecture, languages, geometric reasoning, and user interface. A report on the discussion session, written by the session's moderator, concludes each part. These reports are not intended to be exact records of the discussion, but rather the moderators' summary of their contents. The aim of the workshop was to share the experience the participants gained by developing intelligent CAD (Computer Aided Design) systems, and to evaluate the developed systems to determine which features were still lacking. The workshop was organized as the last one in a series of three workshops under the same title. The first workshop focused on theoretical and methodological aspects, resulting in a sound theoretical basis for intelligent CAD systems. Implementational issues were discussed at the second workshop, paying attention to systems developed with reference to this basis. The experience and evaluation showed a dual outcome. Firstly, it resulted in the development of a new generation of intelligent CAD systems. Secondly, it led us to the development of new theories for intelligent CAD.
Download or read book Artificial Intelligence in Engineering Design written by Christopher Tong and published by Elsevier. This book was released on 2012-12-02 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial Intelligence in Engineering Design is a three volume edited collection of key papers from the field of artificial intelligence and design, aimed at providing a description of the field, and focusing on how ideas and methods from artifical intelligence can help engineers in the design of physical artifacts and processes. The book surveys a wide variety of applications in the areas of civil, mechanical, chemical, VLSI, electrical, and computer engineering. The contributors are from leading academic computer-aided design centers as well as from industry.
Download or read book Computer Aided Design Engineering and Manufacturing written by Cornelius T. Leondes and published by CRC Press. This book was released on 2000-12-12 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the competitive business arena companies must continually strive to create new and better products faster, more efficiently, and more cost effectively than their competitors to gain and keep the competitive advantage. Computer-aided design (CAD), computer-aided engineering (CAE), and computer-aided manufacturing (CAM) are now the industry standard. These seven volumes give the reader a comprehensive treatment of the techniques and applications of CAD, CAE, and CAM.
Download or read book Machine Learning and AI Techniques in Interactive Medical Image Analysis written by Panigrahi, Lipismita and published by IGI Global. This book was released on 2022-09-16 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: The healthcare industry is predominantly moving towards affordable, accessible, and quality health care. All organizations are striving to build communication compatibility among the wide range of devices that have operated independently. Recent developments in electronic devices have boosted the research in the medical imaging field. It incorporates several medical imaging techniques and achieves an important goal for health improvement all over the world. Despite the significant advances in high-resolution medical instruments, physicians cannot always obtain the full amount of information directly from the equipment outputs, and a large amount of data cannot be easily exploited without a computer. Machine Learning and AI Techniques in Interactive Medical Image Analysis discusses how clinical efficiency can be improved by investigating the different types of intelligent techniques and systems to get more reliable and accurate diagnostic conclusions. This book further introduces segmentation techniques to locate suspicious areas in medical images and increase the segmentation accuracy. Covering topics such as computer-aided detection, intelligent techniques, and machine learning, this premier reference source is a dynamic resource for IT specialists, computer scientists, diagnosticians, imaging specialists, medical professionals, hospital administrators, medical students, medical technicians, librarians, researchers, and academicians.
Download or read book Intelligent CAD Systems I written by Paul J.W. ten Hagen and published by Springer. This book was released on 1987-12-30 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: CAD (Computer Aided Design) technology is now crucial for every division of modern industry, from a viewpoint of higher productivity and better products. As technologies advance, the amount of information and knowledge that engineers have to deal with is constantly increasing. This results in seeking more advanced computer technology to achieve higher functionalities, flexibility, and efficient performance of the CAD systems. Knowledge engineering, or more broadly artificial intelligence, is considered a primary candidate technology to build a new generation of CAD systems. Since design is a very intellectual human activity, this approach seems to make sense. The ideas of intelligent CAD systems (ICAD) are now increasingly discussed everywhere. We can observe many conferences and workshops reporting a number of research efforts on this particular subject. Researchers are coming from computer science, artificial intelligence, mechanical engineering, electronic engineering, civil engineering, architectural science, control engineering, etc. But, still we cannot see the direction of this concept, or at least, there is no widely accepted concept of ICAD. What can designers expect from these future generation CAD systems? In which direction must developers proceed? The situation is somewhat confusing.
Download or read book Feature Extraction from CAD Using Artificial Intelligence written by Vijay Saini and published by LAP Lambert Academic Publishing. This book was released on 2013 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of solid modeling has developed a variety of techniques for unambiguous representations of three-dimensional objects. Feature recognition is a sub-discipline of solid modeling that focuses on the design and implementation of algorithms for detecting manufacturing information from solid models produced by computer-aided design (CAD) systems. Examples of this manufacturing information include features such as holes, slots, pockets, steps and other shapes that can be created on modern computer numerically controlled machining systems. Feature recognition has been an interesting research area in solid modeling for a few decades and is considered to be a critical link for integration of CAD and CAM. It is a necessary component of an integrated Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) environment to automatically recognize manufacturing features from a CAD data base or solid model. In this book a methodology for recognizing some of the machining features has been presented. The computational issues involved in building tractable and scalable solutions for automated feature recognition have also been addressed.
Download or read book Intelligent CAD Systems II written by Varol Akman and published by Springer Science & Business Media. This book was released on 1989-06-22 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Records of the 2nd Eurographics Workshop on "Intelligent CAD Systems", Held on April 19-23, 1988, at Konigshof Congress Centre, Veldhoven, the Netherlands
Download or read book AI Applications in Sheet Metal Forming written by Shailendra Kumar and published by Springer. This book was released on 2016-10-25 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises chapters on research work done around the globe in the area of artificial intelligence (AI) applications in sheet metal forming. The first chapter offers an introduction to various AI techniques and sheet metal forming, while subsequent chapters describe traditional procedures/methods used in various sheet metal forming processes, and focus on the automation of those processes by means of AI techniques, such as KBS, ANN, GA, CBR, etc. Feature recognition and the manufacturability assessment of sheet metal parts, process planning, strip-layout design, selecting the type and size of die components, die modeling, and predicting die life are some of the most important aspects of sheet metal work. Traditionally, these activities are highly experience-based, tedious and time consuming. In response, researchers in several countries have applied various AI techniques to automate these activities, which are covered in this book. This book will be useful for engineers working in sheet metal industries, and will serve to provide future direction to young researchers and students working in the area.
Download or read book Application of the Artificial Intelligence Technique to a Computer Aided Design System for Automobiles written by Yukiyoshi Kawasaki and published by . This book was released on 1988 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book INTEGRATING ARTIFICIAL INTELLIGENCE WITH INDUSTRIAL DESIGN written by and published by . This book was released on 2024 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CAD CAM Robotics and Factories of the Future 90 written by Suren N. Dwivedi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: According to the Concurrent Engineering Research Center (CERC) at West Virginia University, "the concurrent engineering (CE) is a rapid simultaneous approach where research and development, design, manufacturing and support are carried out in parallel". The mission of concurrent engineering is to reduce time to market, improve total quality and lower cost for products or systems developed and supported by large organizations. The purpose of the concurrent design methodology is to let the designer know the consequences of his design decisions in the manufacturing and assembly stages as well as in subsequent operations. Design for manufacture and assembly, design for reliability and testability, CAD/CAM/CAE, knowledge based systems, cost analysis and advanced material technology are the major constituents of concurrent engineering. The need for concurrent engineering can be justified from the fact that in every production cycle, the design phase approximately takes 5 to 10% of the total cycle, but overall it influences 80% of the production cycle. This volume contains articles from a wide spectrum dealing with concepts of concurrent engineering. The importance of the knowledge-based systems in the CE environment is significant as they provide the common platform to achieve the same level of expertise to the designers and manufacturers throughout the organization for the specific task. Their role in "do it right the first time" is very important in providing aid to the designers and manufacturers to optimize the design and manufacturing setups for a cost effectiveness and reduced production time.
Download or read book Artificial Intelligence in Design 91 written by John S. Gero and published by Butterworth-Heinemann. This book was released on 1991 with total page 964 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial Intelligence in Design '91 is a collection of 47 papers from the First International Conference on Artificial Intelligence in Design held at Edinburgh in June 1991. The papers in this book are grouped into 13 headings, starting with a background of AI design systems and to which extent AI that results from being used as planning tool be applied to quality-oriented design processes in architecture. A constraint-driven approach to object-oriented design is also shown on real-world objects. The use of CADSYN in the structural design of buildings is examined, along with design-dependent knowledge and design-independent knowledge. Discussions on empowering designers with integrated design environments are given whereby design objects may be retrieved from catalogues without requiring users to form queries. Mention is given to automated adjustment of parameter values frequently used in computer routine applications. The book also introduces the Computer Aided Design (CAD) as applied to architecture. Design representation using data models, non-monotonic reasoning in design, and the cognitive aspects of design using empirical studies are discussed. Topics of the industrial applications of AI in design, such as the needed steps to develop a successful AI-based tool, and a review of the Castlemain Project and telecommunication distribution networks follow. This book is suitable for programmers, computer science students, and architects and engineers who use computers in their line of work
Download or read book Artificial Intelligence in Engineering Design written by Bozzano G Luisa and published by Academic Press. This book was released on 2012-12-02 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial Intelligence in Engineering Design, Volume II: Models of Innovative Design, Reasoning About Physical Systems, and Reasoning About Geometry focuses on the processes, programs, techniques, and technologies involved in the employment of artificial intelligence in engineering design. The selection first takes a look at the automated reuse of design plans in BOGART and ARGO, an analogical reasoning system for solving design problems. Topics include analogy mechanisms in ARGO, analogical reasoning and learning, ARGO development environment, using VEXED to construct a design plan, and how BOGART reuses a design plan. The text then ponders on retrieval strategies in a case-based design system and case-based design, including the functions-to-structure design task in the domain of physical devices, design retrieval, proposition, and modification, and the multi-layered case representation. The publication examines mechanism comparison and classification for design; a case-based approach to the design of mechanical linkages; and studies of heuristic knowledge-based approaches for automated configuration generation and innovation. Topics include applications of stress field estimation to geometric optimization, simplification and abstraction operators, mechanism comparison and classification, linkage synthesis, analytic synthesis techniques, and system architecture. The selection is a valuable reference for readers interested in the use of artificial intelligence in engineering design.
