Download or read book C Programming for Scientists and Engineers with Applications written by Rama Reddy and published by Jones & Bartlett Publishers. This book was released on 2009-08-17 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt: C is a favored and widely used programming language, particularly within the fields of science and engineering. C Programming for Scientists and Engineers with Applications guides readers through the fundamental, as well as the advanced concepts, of the C programming language as it applies to solving engineering and scientific problems. Ideal for readers with no prior programming experience, this text provides numerous sample problems and their solutions in the areas of mechanical engineering, electrical engineering, heat transfer, fluid mechanics, physics, chemistry, and more. It begins with a chapter focused on the basic terminology relating to hardware, software, problem definition and solution. From there readers are quickly brought into the key elements of C and will be writing their own code upon completion of Chapter 2. Concepts are then gradually built upon using a strong, structured approach with syntax and semantics presented in an easy-to-understand sentence format. Readers will find C Programming for Scientists and Engineers with Applications to be an engaging, user-friendly introduction to this popular language.
Download or read book C Programming The Essentials for Engineers and Scientists written by David R. Brooks and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text teaches the essentials of C programming, concentrating on what readers need to know in order to produce stand-alone programs and so solve typical scientific and engineering problems. It is a learning-by-doing book, with many examples and exercises, and lays a foundation of scientific programming concepts and techniques that will prove valuable for those who might eventually move on to another language. Written for undergraduates who are familiar with computers and typical applications but are new to programming.
Download or read book C for Scientists and Engineers written by Richard Johnsonbaugh and published by Prentice Hall. This book was released on 1996-01-01 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book C for Engineers and Scientists written by Harry H. Cheng and published by . This book was released on 2010 with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on systematic software design approach in C for applications in engineering and science following the latest standard developed by the ANSI C/ISO C Standard Committees called C99.
Download or read book Programming for Engineers written by Aaron R. Bradley and published by Springer Science & Business Media. This book was released on 2011-10-25 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: To learn to program is to be initiated into an entirely new way of thinking about engineering, mathematics, and the world in general. Computation is integral to all modern engineering disciplines, so the better you are at programming, the better you will be in your chosen field. The author departs radically from the typical presentation by teaching concepts and techniques in a rigorous manner rather than listing how to use libraries and functions. He presents pointers in the very first chapter as part of the development of a computational model that facilitates an ab initio presentation of subjects such as function calls, call-by-reference, arrays, the stack, and the heap. The model also allows students to practice the essential skill of memory manipulation throughout the entire course rather than just at the end. As a result, this textbook goes further than is typical for a one-semester course -- abstract data types and linked lists, for example, are covered in depth. The computational model will also serve students in their adventures with programming beyond the course: instead of falling back on rules, they can think through the model to decide how a new programming concept fits with what they already know. The book is appropriate for undergraduate students of engineering and computer science, and graduate students of other disciplines. It contains many exercises integrated into the main text, and the author has made the source code available online.
Download or read book C for Engineers and Scientists written by Gary J. Bronson and published by Course Technology. This book was released on 2006 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bronson's second edition makes C++ accessible to first-level engineering students. The book teaches the fundamentals of the C++ language with a gradual refinement of programming skills from procedural to object-oriented. Part One presents procedural programming with an emphasis on modular program design. Part Two, on object-oriented programming, and Part Three, on data structures, are interchangeable to allow for teaching flexibility. In addition, students are introduced to the fundamentals of software engineering with an emphasis on problem-solving techniques, making the text an ideal choice for both one- and two-semester C++ programming courses.
Download or read book C for Scientists Engineers and Mathematicians written by Derek M. Capper and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: C++ is among the most powerful and popular of programming languages for applications. This is an adoptable textbook for undergraduate students who need to use this language for applications that are - in the main - numerical. Most engineering, phys ics, and mathematics degree courses include a computing element: this book should be used where C++ is the chosen language, already the majority of cases. The book is comprehensive and includes advanced features of the language, indicating where they ar e of special interest to the reader. No prior knowledge of C is assumed, and the book's bias towards numerical applications makes it unique in the field.
Download or read book Interfacing with C written by Jayantha Katupitiya and published by Springer Science & Business Media. This book was released on 2006-05-14 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn to write C++ programs by interfacing a computer to a wide range of popular and fundamental real-world technologies. Unique and original approach to use the PC to do real things- not just number crunching and graphics – but writing programs to interact with the outside world. Learn C++ programming in an enjoyable and powerful way. Includes a purpose-designed circuit board
Download or read book An Introduction to HTML and JavaScript written by David R. Brooks and published by Springer Science & Business Media. This book was released on 2007-07-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dual-use technological writing at its best. This book presents HTML and JavaScript in a way that uniquely meets the needs of students in both engineering and the sciences. The author shows how to create simple client-side applications for scientific and engineering calculations. Complete HTML/JavaScript examples with science/engineering applications are used throughout to guide the reader comprehensively through the subject. The book gives the reader a sufficient understanding of HTML and JavaScript to write their online applications. This book emphasises basic programming principles in a modern Web-oriented environment, making it suitable for an introductory programming course for non-computer science majors. It is also ideal for self-study.
Download or read book C Programming for Scientists and Engineers with Applications written by Rama Reddy and published by Jones & Bartlett Learning. This book was released on 2010 with total page 857 pages. Available in PDF, EPUB and Kindle. Book excerpt: C is a favored and widely used programming language, particularly within the fields of science and engineering. C Programming for Scientists and Engineers with Applications guides readers through the fundamental, as well as the advanced concepts, of the C programming language as it applies to solving engineering and scientific problems. Ideal for readers with no prior programming experience, this text provides numerous sample problems and their solutions in the areas of mechanical engineering, electrical engineering, heat transfer, fluid mechanics, physics, chemistry, and more. It begins with a chapter focused on the basic terminology relating to hardware, software, problem definition and solution. From there readers are quickly brought into the key elements of C and will be writing their own code upon completion of Chapter 2. Concepts are then gradually built upon using a strong, structured approach with syntax and semantics presented in an easy-to-understand sentence format. Readers will find C Programming for Scientists and Engineers with Applications to be an engaging, user-friendly introduction to this popular language.
Download or read book An Introduction to High performance Scientific Computing written by Lloyd Dudley Fosdick and published by MIT Press. This book was released on 1996 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for undergraduates, An Introduction to High-Performance Scientific Computing assumes a basic knowledge of numerical computation and proficiency in Fortran or C programming and can be used in any science, computer science, applied mathematics, or engineering department or by practicing scientists and engineers, especially those associated with one of the national laboratories or supercomputer centers. This text evolved from a new curriculum in scientific computing that was developed to teach undergraduate science and engineering majors how to use high-performance computing systems (supercomputers) in scientific and engineering applications. Designed for undergraduates, An Introduction to High-Performance Scientific Computing assumes a basic knowledge of numerical computation and proficiency in Fortran or C programming and can be used in any science, computer science, applied mathematics, or engineering department or by practicing scientists and engineers, especially those associated with one of the national laboratories or supercomputer centers. The authors begin with a survey of scientific computing and then provide a review of background (numerical analysis, IEEE arithmetic, Unix, Fortran) and tools (elements of MATLAB, IDL, AVS). Next, full coverage is given to scientific visualization and to the architectures (scientific workstations and vector and parallel supercomputers) and performance evaluation needed to solve large-scale problems. The concluding section on applications includes three problems (molecular dynamics, advection, and computerized tomography) that illustrate the challenge of solving problems on a variety of computer architectures as well as the suitability of a particular architecture to solving a particular problem. Finally, since this can only be a hands-on course with extensive programming and experimentation with a variety of architectures and programming paradigms, the authors have provided a laboratory manual and supporting software via anonymous ftp. Scientific and Engineering Computation series
Download or read book Introduction to Programming with C for Engineers written by Boguslaw Cyganek and published by John Wiley & Sons. This book was released on 2021-02-08 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete textbook and reference for engineers to learn the fundamentals of computer programming with modern C++ Introduction to Programming with C++ for Engineers is an original presentation teaching the fundamentals of computer programming and modern C++ to engineers and engineering students. Professor Cyganek, a highly regarded expert in his field, walks users through basics of data structures and algorithms with the help of a core subset of C++ and the Standard Library, progressing to the object-oriented domain and advanced C++ features, computer arithmetic, memory management and essentials of parallel programming, showing with real world examples how to complete tasks. He also guides users through the software development process, good programming practices, not shunning from explaining low-level features and the programming tools. Being a textbook, with the summarizing tables and diagrams the book becomes a highly useful reference for C++ programmers at all levels. Introduction to Programming with C++ for Engineers teaches how to program by: Guiding users from simple techniques with modern C++ and the Standard Library, to more advanced object-oriented design methods and language features Providing meaningful examples that facilitate understanding of the programming techniques and the C++ language constructions Fostering good programming practices which create better professional programmers Minimizing text descriptions, opting instead for comprehensive figures, tables, diagrams, and other explanatory material Granting access to a complementary website that contains example code and useful links to resources that further improve the reader’s coding ability Including test and exam question for the reader’s review at the end of each chapter Engineering students, students of other sciences who rely on computer programming, and professionals in various fields will find this book invaluable when learning to program with C++.
Download or read book Beginning C written by Ivor Horton and published by Apress. This book was released on 2007-12-22 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: C is the programming language of choice when speed and reliability are required. It is used for many low-level tasks, such as device drivers and operating-system programming. For example, much of Windows and Linux is based on C programming. The updated 4th edition of Beginning C builds on the strengths of its predecessors to offer an essential guide for anyone who wants to learn C or desires a ‘brush-up’ in this compact, fundamental language. This classic from author, lecturer and respected academic Ivor Horton is the essential guide for anyone looking to learn the C language from the ground up.
Download or read book CUDA Fortran for Scientists and Engineers written by Gregory Ruetsch and published by Elsevier. This book was released on 2013-09-11 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: CUDA Fortran for Scientists and Engineers shows how high-performance application developers can leverage the power of GPUs using Fortran, the familiar language of scientific computing and supercomputer performance benchmarking. The authors presume no prior parallel computing experience, and cover the basics along with best practices for efficient GPU computing using CUDA Fortran. To help you add CUDA Fortran to existing Fortran codes, the book explains how to understand the target GPU architecture, identify computationally intensive parts of the code, and modify the code to manage the data and parallelism and optimize performance. All of this is done in Fortran, without having to rewrite in another language. Each concept is illustrated with actual examples so you can immediately evaluate the performance of your code in comparison. Leverage the power of GPU computing with PGI’s CUDA Fortran compiler Gain insights from members of the CUDA Fortran language development team Includes multi-GPU programming in CUDA Fortran, covering both peer-to-peer and message passing interface (MPI) approaches Includes full source code for all the examples and several case studies Download source code and slides from the book's companion website
Download or read book Beginning Julia Programming written by Sandeep Nagar and published by Apress. This book was released on 2017-11-25 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get started with Julia for engineering and numerical computing, especially data science, machine learning, and scientific computing applications. This book explains how Julia provides the functionality, ease-of-use and intuitive syntax of R, Python, MATLAB, SAS, or Stata combined with the speed, capacity, and performance of C, C++, or Java. You’ll learn the OOP principles required to get you started, then how to do basic mathematics with Julia. Other core functionality of Julia that you’ll cover, includes working with complex numbers, rational and irrational numbers, rings, and fields. Beginning Julia Programming takes you beyond these basics to harness Julia’s powerful features for mathematical functions in Julia, arrays for matrix operations, plotting, and more. Along the way, you also learn how to manage strings, write functions, work with control flows, and carry out I/O to implement and leverage the mathematics needed for your data science and analysis projects. "Julia walks like Python and runs like C". This phrase explains why Julia is quickly growing as the most favored option for data analytics and numerical computation. After reading and using this book, you'll have the essential knowledge and skills to build your first Julia-based application. What You'll Learn Obtain core skills in Julia Apply Julia in engineering and science applications Work with mathematical functions in Julia Use arrays, strings, functions, control flow, and I/O in Julia Carry out plotting and display basic graphics Who This Book Is For Those who are new to Julia; experienced users may also find this helpful as a reference.
Download or read book Scientific and Engineering C written by John J. Barton and published by Addison-Wesley Professional. This book was released on 1994 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlights: builds on knowledge of both FORTRAN and C, the languages most familiar to scientists and engineers; systematically treats object-oriented programming, templates, and the C++ type system; relates the C++ programming process to expressing commonality in the design and implementation of programs; describes how to use existing FORTRAN and C subroutine libraries to implement C++ classes; introduces advanced techniques coordinating templates, inheritance, virtual function interfaces, and exceptions in substantive examples; provides examples, including an extensive family of array classes, smart pointers, class wrappers for LAPACK, classes for abstract algebra and dimensional analysis, function objects, exploiting existing C and FORTRAN libraries, automatic differentiation, and data analysis via nonlinear least squares using the singular value decomposition; and references key sources of new programming ideas and C++ programming techniques.
Download or read book ESSENTIAL JAVA FOR SCIENTISTS AND ENGINEERS written by Brian D. Hahn and published by Butterworth-Heinemann. This book was released on 2002-10 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text serves as an introduction to the programming language Java for scientists and engineers, as well as experienced programmers wishing to learn Java as an additional language. The authors have specifically taken a hands-on approach to get the reader writing and running programs immediately. In addition, the book focuses on how Java, and object-oriented programming, can be used to solve science and engineering problems.
