Download or read book Burn Rate Mechanisms Volume 2 A Model for Ammonium Nitrate Propellant Combustion written by and published by . This book was released on 1990 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: When the space shuttle is launched, each Solid Rocket Motor (SRM) booster generates approximately 100 tons of HCI in the exhaust. Thus, with the two boosters, over 200 tons of HCI is generated from each space shuttle launch. The HCI presents several potential problems. The HOI provides nucleation sites for moisture in the air - with the result being the condensed, hydrated form of hydrochloric acid (HCI. H2O). The resultant acid cloud results in a very visible cloud which through further condensation can result in acid rain. The acid rain is obviously detrimental to both plant and animal life dependent on the concentration levels it achieves as it reaches the ground. In addition, at higher elevations, the HOI can react with the protective layer of ozone causing a degradation of some of the ozone. The HO comes from the AR (ammonium perchlorate) which is the oxidizer in the solid propellant for the 5PM boosters. The SRM propellant contains approximately 70% AP which generates slightly more than 21 weight percent HG in the exhaust gases. For these reasons it is desirable to find a replacement for the AP to eliminate the HCI in the rocket exhaust.
Download or read book Ammonium Nitrate magnesium Propellant Combustion and Heat Transfer Mechanisms written by M. Q. Brewster and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solid Propellant Chemistry Combustion and Motor Interior Ballistics 1999 written by Vigor Yang and published by AIAA. This book was released on 2000 with total page 1038 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Energy Materials written by Jai Prakash Agrawal and published by John Wiley & Sons. This book was released on 2015-11-20 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by an insider with over 40 years of high energy materials (HEMs) experience in academia, industry and defense organizations, this handbook and ready reference covers all important HEMs from the 1950s to the present with their respective properties and intended purposes. Written at an attainable level for professionals, engineers and technicians alike, the book provides a comprehensive view of the current status and suggests further directions for research and development. An introductory chapter on the chemical and thermodynamic basics allows the reader to become acquainted with the fundamental features of explosives, before moving on to the important safety aspects in processing, handling, transportation and storage of high energy materials. With its collation of results and formulation strategies hitherto scattered in the literature, this should be on the shelf of every HEM researcher and developer.
Download or read book Technical Abstract Bulletin written by and published by . This book was released on with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Propellants and Explosives written by Naminosuke Kubota and published by John Wiley & Sons. This book was released on 2015-04-23 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition of the classic on the thermochemical aspects of the combustion of propellants and explosives is completely revised and updated and now includes a section on green propellants and offers an up-to-date view of the thermochemical aspects of combustion and corresponding applications. Clearly structured, the first half of the book presents an introduction to pyrodynamics, describing fundamental aspects of the combustion of energetic materials, while the second part highlights applications of energetic materials, such as propellants, explosives and pyrolants, with a focus on the phenomena occurring in rocket motors. Finally, an appendix gives a brief overview of the fundamentals of aerodynamics and heat transfer, which is a prerequisite for the study of pyrodynamics. A detailed reference for readers interested in rocketry or explosives technology.
Download or read book Chemistry of High Energy Materials written by Thomas M. Klapötke and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-08-21 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 4th revised edition expands on the basic chemistry of high energy materials of the precious editions and examines new research developments, including hydrodynamics and ionic liquids. Applications in military and civil fields are discussed. This work is of interest to advanced students in chemistry, materials science and engineering, as well as to all those working in defense technology.
Download or read book Combustion Theory written by Forman A. Williams and published by CRC Press. This book was released on 2018-03-05 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion Theory delves deeper into the science of combustion than most other texts and gives insight into combustions from a molecular and a continuum point of view. The book presents derivations of the basic equations of combustion theory and contains appendices on the background of subjects of thermodynamics, chemical kinetics, fluid dynamics, and transport processes. Diffusion flames, reactions in flows with negligible transport and the theory of pre-mixed flames are treated, as are detonation phenomena, the combustion of solid propellents, and ignition, extinction, and flamibility pehnomena.
Download or read book Fundamentals of Rocket Propulsion written by DP Mishra and published by CRC Press. This book was released on 2017-07-20 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book follows a unified approach to present the basic principles of rocket propulsion in concise and lucid form. This textbook comprises of ten chapters ranging from brief introduction and elements of rocket propulsion, aerothermodynamics to solid, liquid and hybrid propellant rocket engines with chapter on electrical propulsion. Worked out examples are also provided at the end of chapter for understanding uncertainty analysis. This book is designed and developed as an introductory text on the fundamental aspects of rocket propulsion for both undergraduate and graduate students. It is also aimed towards practicing engineers in the field of space engineering. This comprehensive guide also provides adequate problems for audience to understand intricate aspects of rocket propulsion enabling them to design and develop rocket engines for peaceful purposes.
Download or read book Chemical Rocket Propulsion written by Luigi T. De Luca and published by Springer. This book was released on 2016-08-19 with total page 1069 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed and expanded from the work presented at the New Energetic Materials and Propulsion Techniques for Space Exploration workshop in June 2014, this book contains new scientific results, up-to-date reviews, and inspiring perspectives in a number of areas related to the energetic aspects of chemical rocket propulsion. This collection covers the entire life of energetic materials from their conceptual formulation to practical manufacturing; it includes coverage of theoretical and experimental ballistics, performance properties, as well as laboratory-scale and full system-scale, handling, hazards, environment, ageing, and disposal. Chemical Rocket Propulsion is a unique work, where a selection of accomplished experts from the pioneering era of space propulsion and current technologists from the most advanced international laboratories discuss the future of chemical rocket propulsion for access to, and exploration of, space. It will be of interest to both postgraduate and final-year undergraduate students in aerospace engineering, and practicing aeronautical engineers and designers, especially those with an interest in propulsion, as well as researchers in energetic materials.
Download or read book Fundamentals of Solid Propellant Combustion written by K. K. Kuo and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Propellants and Explosives written by Naminosuke Kubota and published by John Wiley & Sons. This book was released on 2007-02-27 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of the classic on the thermochemistry of combustion now features five new chapters and updated coverage of significant recent developments in the field. Addressing both experimental as well as theoretical aspects, the book covers the thermochemical and combustion characteristics of all important types of energetic materials, such as explosives, propellants, and the new class of pyrolants, as well as related phenomena. It presents the fundamental bases of the energetics of materials, deflagration and detonation, thermochemical process of decomposition and combustion, plus combustion wave structures. The book also goes on to discuss the combustion mechanisms of various types of energetic materials, propellants, and explosives, based on the heat transfer process in the combustion waves. The burning rate models are also presented as an aid to understanding the rate-controlling steps of combustion processes, thus demonstrating the relationships of burning rate versus pressure and initial temperature. As a major topic new to this edition, new propulsion methods such as duct rockets, ramjets, pulse motors and thrusters are described in detail, while appendices on flow field dynamics and shock wave propagation have been added.
Download or read book Applications of Calorimetry in a Wide Context written by Amal Ali Elkordy and published by BoD – Books on Demand. This book was released on 2013-01-23 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Calorimetry, as a technique for thermal analysis, has a wide range of applications which are not only limited to studying the thermal characterisation (e.g. melting temperature, denaturation temperature and enthalpy change) of small and large drug molecules, but are also extended to characterisation of fuel, metals and oils. Differential Scanning Calorimetry is used to study the thermal behaviours of drug molecules and excipients by measuring the differential heat flow needed to maintain the temperature difference between the sample and reference cells equal to zero upon heating at a controlled programmed rate. Microcalorimetry is used to study the thermal transition and folding of biological macromolecules in dilute solutions. Microcalorimetry is applied in formulation and stabilisation of therapeutic proteins. This book presents research from all over the world on the applications of calorimetry on both solid and liquid states of materials.
Download or read book Energetic Materials written by Ulrich Teipel and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incorporation of particular components with specialized properties allows one to tailor the end product's properties. For instance, the sensitivity, burning behavior, thermal or mechanical properties or stability of energetic materials can be affected and even controllably varied through incorporation of such ingredients. This book examines particle technologies as applied to energetic materials such as propellants and explosives, thus filling a void in the literature on this subject. Following an introduction covering general features of energetic materials, the first section of this book describes methods of manufacturing particulate energetic materials, including size reduction, crystallization, atomization, particle formation using supercritical fluids and microencapsulation, agglomeration phenomena, special considerations in mixing explosive particles and the production of nanoparticles. The second section discusses the characterization of particulate materials. Techniques and methods such as particle size analysis, morphology elucidation and the determination of chemical and thermal properties are presented. The wettability of powders and rheological behavior of suspensions and solids are also considered. Furthermore, methods of determining the performance of particular energetic materials are described. Each chapter deals with fundamentals and application possibilities of the various methods presented, with particular emphasis on issues applicable to particulate energetic materials. The book is thus equally relevant for chemists, physicists, material scientists, chemical and mechanical engineers and anyone interested or engaged in particle processing and characterization technologies.
Download or read book Thermal Decomposition and Combustion of Explosives and Propellants written by G.B. Manelis and published by CRC Press. This book was released on 2003-01-30 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book investigates the synthesis, kinetics, and thermal decomposition properties and processing of energy-producing materials used in propellants, explosives, pyrotechnic, and gas-generating compositions. Thermal Decomposition and Combustion of Explosives and Propellants provides several mechanisms and stages for the thermal decomposition and combustion reactions of most flammable compounds and their mixtures, such asaliphatic and aromatic nitrocompounds, nitramines, nitroesters, organic azides, furazanes, tetrazols, difluoroamines, polynitrous heterocycles, and onium salts. The authors examine the classic problem of the dependence of explosive activity on molecular structure, using applications to predict the stability, compatibility, and the stabilization of explosives and propellant components. They also offer experimental results examining factors such as subsurface decomposition, evaporation, and dispersion of materials, which can be used to control combustion of condensed systems. Providing several approaches to stability, safety, and controlled combustion of flammable substances, Thermal Decomposition and Combustion of Explosives and Propellants is a multi-dimensional resource for graduate students, researchers and professionals interested in chemical kinetics, the combustion and synthesis of high-energy materials, criminal forensics, and the field of explosives, powders, and solid rocket propellants.
Download or read book Chemistry and Physics of Energetic Materials written by S.N. Bulusu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents a collection of lectures presented at the NATO Advanced study Institute(ASI) on "Chemistry & Physics of the Molecular Processes in Energetic Materials", held at Hotel Torre Normanna, Altavilla Milicia, Sicily, Italy, September 3 to 15, 1989. The institute was attended by seventy participants including twenty lecturers, drawn from thirteen countries. The purpose of the institute was to review the major ad vances made in recent years in the theoretical and experi mental aspects of explosives and propellants. In accordance with the format of the NATO ASI, it was arranged to have a relatively small number of speakers to present in depth, re view type lectures emphasizing the basic research aspects of the subject, over a two week period. Most of the speakers gave two lectures, each in excess of one hour with addition al time for discussions. The scope of the meeting was limit ed to molecular and spectroscopic studies since the hydro dynamic aspects of detonation and various performance crite ria of energetic materials are often covered adequately in other international meetings. An attempt was made to have a coherent presentation of various theoretical, computational and spectroscopic approaches to help a better understanding of energetic materials from a molecular point of view. The progress already made in these areas is such that structure property (e. g.
