Download or read book Bulk Solids Handling written by Don McGlinchey and published by Wiley-Blackwell. This book was released on 2008-04-28 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Bulk Solids Handling: Equipment Selection and Operation provides an overview of the major technologies involved in the storage and handling of particulate materials from large grains to fine cohesive materials. - Topics covered include characterisation of individual particles and bulk particulate materials, silo design for strength and flow, pneumatic conveying systems, mechanical conveying, and small scale operations. - Guidance is given on appropriate equipment choices depending on the type of material to be handled, and applications and limitations of current bulk solids handling equipment are discussed."--Jacket.
Download or read book Bulk Solids Handling written by C.R. Woodcock and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: An understanding ofthe properties and the handling characteristics of liquids and gases has long been regarded as an essential requirement for most practising engineers. It is therefore not surprising that, over the years, there has been a regular appearance of books dealing with the fundamentals of fluid mechanics, fluid flow, hydraulics and related topics. What is surprising is that there has been no parallel development of the related discipline of Bulk Solids Handling, despite its increasing importance in modern industry across the world. It is only very recently that a structured approach to the teaching, and learning, of the subject has begun to evolve. A reason for the slow emergence of Bulk Solids Handling as an accepted topic of study in academic courses on mechanical, agricultural, chemical, mining and civil engineering is perhaps that the practice is so often taken for granted. Certainly the variety of materials being handled in bulk is almost endless, ranging in size from fine dust to rocks, in value from refuse to gold, and in temperature from deep-frozen peas to near-molten metal.
Download or read book Handling of Bulk Solids written by P. A. Shamlou and published by Elsevier. This book was released on 2013-10-22 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handling of Bulk Solids provides a comprehensive discussion of the field of solids flow and handling in the process industries. Presentation of the subject follows classical lines of separate discussions for each topic, so each chapter is self-contained and can be read on its own. Topics discussed include bulk solids flow and handling properties; pressure profiles in bulk solids storage vessels; the design of storage silos for reliable discharge of bulk materials; gravity flow of particulate materials from storage vessels; pneumatic transportation of bulk solids; and the hazards of solid-materials handling and processing along with their prevention. Worked-out examples are included at the end of each chapter to familiarize the reader with the numerical manipulations and orders of magnitude of various parameters which occur in the subject of bulk solids handling. Because of the complicated form of most of the design equations involved, the computer is an ideal vehicle for the solution of many design problems in bulk solids handling. This book is suitable for advanced undergraduate and postgraduate levels as well as for practitioners in industry.
Download or read book Powders and Bulk Solids written by Dietmar Schulze and published by Springer Nature. This book was released on 2021-09-02 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book concentrates on powder flow properties, their measurement and applications. These topics are explained starting from the interactions between individual particles up to the design of silos. A wide range of problems are discussed – such as flow obstructions, segregation, and vibrations. The goal is to provide a deeper understanding of the powder flow, and to show practical solutions.
Download or read book Powder and Bulk Solids Handling Processes written by Koichi Iinoya and published by CRC Press. This book was released on 1988-07-01 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents some key points in the instrumentation of powder handling processes and provides readers with sufficient knowledge of instrumentation to act as a base for the development of new instruments. It is helpful for instrumentation engineers in powder and bulk solid processes.
Download or read book Bulk Materials Handling Handbook written by Jacob Fruchtbaum and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: The handling of bulk materials is a continuously completed projects. Much of the nomenclature has been changing science. Since very few schools teach the han brought up to date. dling of bulk materials, it is necessary for practicing en Publication of the material contained herein is not in gineers to develop their own training manuals. This book tended as a representation or warranty on the part of the is an abbreviated version of a manual used for that pur author, publisher, editors, or any other person or firm pose in our office, and developed over a period of more named herein that it is suitable for any particular use, or than 50 years. While some industrial firms follow their free from infringement of any patent or patents. own practices, the trend in the past few years has been The text is intended as a guide. When used for any to adopt the standards of equipment manufacturers' as specific project, a competent professional engineer sociations and similar organizations. The selection of should be retained to verify the assumptions, applica material and the use of drawiugs instead of photographs bility, calculations, and accuracy of the particular de is based on our experience. sign.
Download or read book Characterisation of Bulk Solids written by Don McGlinchey and published by John Wiley & Sons. This book was released on 2009-02-12 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handling of powders and bulk solids is a critical industrial technology across a broad spectrum of industries, from minerals processing to bulk and fine chemicals, and the food and pharmaceutical industries, yet is rarely found in the curricula of engineering or chemistry departments. With contributions from leading authors in their respective fields, Characterisation of Bulk Solids provides the reader with a sound understanding of the techniques, importance and application of particulate materials characterisation. It covers the fundamental characteristics of individual particles and bulk particulate materials, and includes discussion of a wide range of measurement techniques, and the use of material characteristics in design and industrial practice. The reader will then be in a better position to diagnose solids handling and processing problems in industry, and to deal with experts and equipment suppliers from an informed standpoint. Written for post-graduate engineers, chemical scientists and technologists at all stages of their industrial career, the book will also serve as an ideal primer in any of the specialist areas to inform further study.
Download or read book Guidelines for Safe Handling of Powders and Bulk Solids written by Stanley S. Grossel and published by Wiley-AIChE. This book was released on 2005 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powders and bulk solids, handled widely in the chemical, pharmaceutical, agriculture, smelting, and other industries present unique fire, explosion, and toxicity hazards. Indeed, substances which are practically inert in consolidated form may become quite hazardous when converted to powders and granules. The U.S. Chemical Safety and Hazard Investigation Board is currently investigating dust explosions that occured in 2003 at WestPharma, CTA Acoustics, and Hayes-Lemmerz, and is likely to recommend that companies that handle powders or whose operations produce dust pay more attention to understanding the hazards that may exist at their facility. This new CCPS guidelines book will discuss the types of hazards that can occur in a wide range of process equipment and with a wide range of substances, and will present measures to address these hazards.
Download or read book Bulk Material Handling written by Michael Rivkin Ph.D. and published by Partridge Publishing Singapore. This book was released on 2018-09-15 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tens of thousands of mechanical engineers are engaged in the design, building, upgrading, and optimization of various material handling facilities. The peculiarity of material handling is that there are numerous technical solutions to any problem. The engineer’s personal selection of the optimal solution is as critical as the technical component. Michael Rivkin, Ph.D., draws on his decades of experience in design, construction, upgrading, optimization, troubleshooting, and maintenance throughout the world, to highlight topics such as: • physical principles of various material handling systems; • considerations in selecting technically efficient and environmentally friendly equipment; • best practices in upgrading and optimizing existing bulk material handling facilities; • strategies to select proper equipment in the early phases of a new project. Filled with graphs, charts, and case studies, the book also includes bulleted summaries to help mechanical engineers without a special background in material handling find optimal solutions to everyday problems.
Download or read book Materials Handling Handbook written by Raymond A. Kulweic and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 1482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sponsored jointly by the American Society of Mechanical Engineers and International Material Management Society, this single source reference is designed to meet today's need for updated technical information on planning, installing and operating materials handling systems. It not only classifies and describes the standard types of materials handling equipment, but also analyzes the engineering specifications and compares the operating capabilities of each type. Over one hundred professionals in various areas of materials handling present efficient methods, procedures and systems that have significantly reduced both manufacturing and distribution costs.
Download or read book Unit Operations of Particulate Solids written by Enrique Ortega-Rivas and published by CRC Press. This book was released on 2016-04-19 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Suitable for practicing engineers and engineers in training, this book covers the most important operations involving particulate solids. Through clear explanations of theoretical principles and practical laboratory exercises, the text provides an understanding of the behavior of powders and pulverized systems. It also helps readers develop skills for operating, optimizing, and innovating particle processing technologies and machinery in order to carry out industrial operations. The author explores common bulk solids processing operations, including milling, agglomeration, fluidization, mixing, and solid-fluid separation.
Download or read book Sampling and Weighing of Bulk Solids written by Jan W. Merks and published by . This book was released on 1985 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mixing of Solids written by Ralf Weinekötter and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the theoretical and practical aspects of the mixing of solids and presents an overview as well as detailed know-how and experience. The book demonstrates the state of the art of mixing and segregation technology, quality control, design of mixers, design scale-up and engineering of complete processes. Includes checklists, criteria for choosing batch or continuous process, and practical examples of installed systems.
Download or read book Chemical Engineering for Non Chemical Engineers written by Jack Hipple and published by John Wiley & Sons. This book was released on 2017-01-05 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Outlines the concepts of chemical engineering so that non-chemical engineers can interface with and understand basic chemical engineering concepts Overviews the difference between laboratory and industrial scale practice of chemistry, consequences of mistakes, and approaches needed to scale a lab reaction process to an operating scale Covers basics of chemical reaction eningeering, mass, energy, and fluid energy balances, how economics are scaled, and the nature of various types of flow sheets and how they are developed vs. time of a project Details the basics of fluid flow and transport, how fluid flow is characterized and explains the difference between positive displacement and centrifugal pumps along with their limitations and safety aspects of these differences Reviews the importance and approaches to controlling chemical processes and the safety aspects of controlling chemical processes, Reviews the important chemical engineering design aspects of unit operations including distillation, absorption and stripping, adsorption, evaporation and crystallization, drying and solids handling, polymer manufacture, and the basics of tank and agitation system design
Download or read book Size Reduction of Divided Solids written by Jean-Paul Duroudier and published by Elsevier. This book was released on 2016-10-14 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Size Reduction of Divided Solids, part of the Industrial Equipment for Chemical Engineering set, presents a practical guide for choosing devices and flow and rate parameters in the size reduction of divided solids. The size reducing principles are presented, with their application to plant products used as examples, also taking into account the influences of heat and humidity. The author also provides the methods needed for understanding the equipment used in applied thermodynamics to encourage students and engineers to self build the programs they need. Chapters are complemented with appendices that provide additional information and associated references. - Includes the empirical laws governing overflow and underflow of a bulk solid - Provides characteristics of bulk solids - Presents a practical guide for choosing devices and flow and rate parameters in the size reduction of divided solids
Download or read book Principles of Powder Mechanics written by R. L. Brown and published by Elsevier. This book was released on 2016-01-11 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Series of Monographs in Chemical Engineering, Volume 10: Principles of Powder Mechanics: Essays on the Packing and Flow of Powders and Bulk Solids covers topics on packings; elementary statics; measurement of powder properties; flow patterns and segregation; and kinematics.
Download or read book Aspen Plus written by Kamal I. M. Al-Malah and published by John Wiley & Sons. This book was released on 2022-10-12 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: ASPEN PLUS® Comprehensive resource covering Aspen Plus V12.1 and demonstrating how to implement the program in versatile chemical process industries Aspen Plus®: Chemical Engineering Applications facilitates the process of learning and later mastering Aspen Plus®, the market-leading chemical process modeling software, with step-by-step examples and succinct explanations. The text enables readers to identify solutions to various process engineering problems via screenshots of the Aspen Plus® platforms in parallel with the related text. To aid in information retention, the text includes end-of-chapter problems and term project problems, online exam and quiz problems for instructors that are parametrized (i.e., adjustable) so that each student will have a standalone version, and extra online material for students, such as Aspen Plus®-related files, that are used in the working tutorials throughout the entire textbook. The second edition of Aspen Plus®: Chemical Engineering Applications includes information on: Various new features that were embedded into Aspen Plus V12.1 and existing features which have been modified Aspen Custom Modeler (ACM), covering basic features to show how to merge customized models into Aspen Plus simulator New updates to process dynamics and control and process economic analysis since the first edition was published Vital areas of interest in relation to the software, such as polymerization, drug solubility, solids handling, safety measures, and energy saving For chemical engineering students and industry professionals, the second edition of Aspen Plus®: Chemical Engineering Applications is a key resource for understanding Aspen Plus and the new features that were added in version 12.1 of the software. Many supplementary learning resources help aid the reader with information retention.
