Download or read book Building Materials and Products Hygrothermal Properties Tabulated Design Values written by British Standards Institute Staff and published by . This book was released on 2000-07-15 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction materials, Specific heat, Mathematical calculations, Moisture measurement, Tables (data), Design, Thermal conductivity, Thermal properties of materials, Thermal protection, Thermal resistance, Thermal insulation, Thermal insulating materials

Download or read book Materials for Architects and Builders written by Arthur Lyons and published by Routledge. This book was released on 2019-08-28 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Architects and Builders provides a clear and concise introduction to the broad range of materials used within the construction industry and covers the essential details of their manufacture, key physical properties, specification and uses. Understanding the basics of materials is a crucial part of undergraduate and diploma construction or architecture-related courses, and this established textbook helps the reader to do just that with the help of colour photographs and clear diagrams throughout. This new sixth edition has been completely revised and updated to include the latest developments in materials research, new images, appropriate technologies and relevant legislation. The ecological effects of building construction and lifetime use remain an important focus, and this new edition includes a wide range of energy-saving building components.

Download or read book Hygrothermal Numerical Simulation Tools Applied to Building Physics written by João M.P.Q. Delgado and published by Springer Science & Business Media. This book was released on 2012-12-15 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a critical review on the development and application of hygrothermal analysis methods to simulate the coupled transport processes of Heat, Air, and Moisture (HAM) transfer for one or multidimensional cases. During the past few decades there has been relevant development in this field of study and an increase in the professional use of tools that simulate some of the physical phenomena that are involved in Heat, Air and Moisture conditions in building components or elements. Although there is a significant amount of hygrothermal models referred in the literature, the vast majority of them are not easily available to the public outside the institutions where they were developed, which restricts the analysis of this book to only 14 hygrothermal modelling tools. The special features of this book are (a) a state-of-the-art of numerical simulation tools applied to building physics, (b) the boundary conditions importance, (c) the material properties, namely, experimental methods for the measurement of relevant transport properties, and (d) the numerical investigation and application The main benefit of the book is that it discusses all the topics related to numerical simulation tools in building components (including state-of-the-art and applications) and presents some of the most important theoretical and numerical developments in building physics, providing a self-contained major reference that is appealing to both the scientists and the engineers. At the same time, this book will be going to the encounter of a variety of scientific and engineering disciplines, such as civil and mechanical engineering, architecture, etc... The book is divided in several chapters that intend to be a resume of the current state of knowledge for benefit of professional colleagues.

Download or read book Materials for Architects and Builders written by Arthur R. Lyons and published by Routledge. This book was released on 2010 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bricks and brickwork; Blocks and blockwork; Lime, cement and concrete; Timber and timber products; Ferrous and non-ferrous metals; Bitumen and flat roofing materials; Glass; Ceramic materials; Stone and cast stone; Plastics; Glass-fibre reinforced plastics, cement and gypsum; Plaster and board materials; Insulation materials; Sealants, gaskets and adhesives; Paints, wood stains, varnishes and colour; Energy-saving materials and componets; Recycled and ecological materials; Sustainability

Download or read book Handbook of Energy Efficiency in Buildings written by Umberto Desideri and published by Butterworth-Heinemann. This book was released on 2018-11-12 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Energy Efficiency in Buildings: A Life Cycle Approach offers a comprehensive and in-depth coverage of the subject with a further focus on the Life Cycle. The editors, renowned academics, invited a diverse group of researchers to develop original chapters for the book and managed to well integrate all contributions in a consistent volume. Sections cover the role of the building sector on energy consumption and greenhouse gas emissions, international technical standards, laws and regulations, building energy efficiency and zero energy consumption buildings, the life cycle assessment of buildings, from construction to decommissioning, and other timely topics. The multidisciplinary approach to the subject makes it valuable for researchers and industry based Civil, Construction, and Architectural Engineers. Researchers in related fields as built environment, energy and sustainability at an urban scale will also benefit from the books integrated perspective. - Presents a complete and thorough coverage of energy efficiency in buildings - Provides an integrated approach to all the different elements that impact energy efficiency - Contains coverage of worldwide regulation

Download or read book Interiors Construction Manual written by Gerhard Hausladen and published by Walter de Gruyter. This book was released on 2012-12-10 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soccer stadiums, airports, theaters, museums – it falls to very few architects to tackle spectacular building tasks like these. The everyday work of most architects is more often focused on "manageable" projects like the renovation, remodeling, or rebuilding of single- and multi-family houses, schools, and offices. Whatever the nature of the building task, interior construction is always a significant design and qualitative challenge that calls for highly detailed technical expertise. After all, it affects the realm that will be brought to life and utilized by the user when the task is finished, and whose aesthetic and functional serviceability will be put to the test each and every day. The Interior Construction Manual supports planners in their daily work as a practical planning aid and reference work with the relevant standards, guidelines, reference details, and constructional solutions, all illustrated by built example projects. It brings together the crucial facts on all aspects of interior construction and presents the key fundamentals of building physics, fire protection, interior construction systems, and openings. In addition, it offers concrete tips on integrated planning approaches, energy and sustainability issues, materials used in interior construction, hazardous substances, and dealing with building services and light planning.

Download or read book Building Regulations in Brief written by Ray Tricker and published by Routledge. This book was released on 2014-04-16 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt: This eighth edition of the most popular and trusted guide to the building regulations is the most comprehensive revision yet. It reflects all the latest amendments to Building Regulations, Planning Permission and the Approved Documents A,B,C, H, K, P, Regulation 7 incorporating all amendments up to December 2013 (including the changes to Leaflets L1A and L2A regarding the conservation of heat and energy in new buildings which came into effect April 2014). This new edition also contains details of the new national planning guidance system and initiatives to speed up the planning process such as the new on line planning application process. It contains an updated list of fees for planning consents and provides guidance on the changes to permitted development rights in Agricultural, Business and Residential buildings which came into force on 1 October 2013. Giving practical information throughout on how to work with (and within) the regulations, this book enables compliance in the simplest and most cost-effective manner possible. The no-nonsense approach of Building Regulations in Brief cuts through the confusion and explains the meaning of the regulations; consequently it has become a favourite for anyone involved in the building industry as well as those planning to have work carried out in their home.

Download or read book Applied Building Physics written by Hugo S. L. Hens and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die Energiekrise der 1970er Jahre, häufig auftretende Feuchteprobleme, Klagen über das Sick-Building-Syndrom und mangelnden Komfort hinsichtlich Raumklima und Behaglichkeit und nicht zuletzt das Bemühen um Nachhaltigkeit haben die Bauphysik zu einem Innovationsmotor auf dem Gebäudesektor gemacht. Dabei war die gesellschaftliche Forderung nach Energieeinsparung in Gebäuden ohne Gebrauchseinschränkungen der Auslöser für die ganzheitliche Planung. Wie alle Ingenieurwissenschaften ist auch die Bauphysik anwendungsorientiert, weshalb sich nach einem ersten Buch über die Grundlagen das vorliegende zweite Buch mit den Hintergründen der Gebrauchstauglichkeit und den Anforderungen an Energieeffizienz in Gebäuden befasst. Außenklimabedingungen und Raumklimaberechnungen werden diskutiert, Energieverluste und -gewinne werden für Gebäude und separat für die Gebäudehülle untersucht. Die wichtigen physikalischen Eigenschaften für den gekoppelten Wärme- und Feuchtetransport durch Baukonstruktionen werden für zahlreiche Materialien aufgeführt. Für das Buch stützt sich der Autor auf seine Erfahrungen aus 35 Jahren Lehre der Bauphysik für Architekten und Bauingenieure und 40 Jahre Tätigkeit in der Forschung und als Beratender Ingenieur.

Download or read book Building Refurbishment for Energy Performance written by Anna Magrini and published by Springer Science & Business Media. This book was released on 2014-02-10 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Europe, the building sector accounts for 40% of energy consumption which has a strong influence on greenhouse gas emissions. The book deals with efficient methodologies aimed to reduce greenhouse gas emissions in the building sector. This includes analyses of the building envelopes, the heating systems, the use of solar energy and the assessment of the environmental and energy sustainability of the proposed solutions. After a brief introduction to the physical fundamentals involved in the study, results are presented to support cost-effective technical strategies to promote actions for energy saving, in the most critical fields and with the most economic advantage.

Download or read book Materials and Contact Characterisation IX written by S. Hernández and published by WIT Press. This book was released on 2019-07-23 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Including papers from the 9th edition of the International Conference on Computational Methods and Experiments in Material and Contact Characterisation this volume presents the work of selected researchers on the subject. Material and contact characterisation is a rapidly advancing field and this volume contains the latest research. Of particular interest to industry and society is the knowledge of surface treatment and contact mechanics of these materials to determine the in-service behaviour of components subject to contact conditions. Modern society requires systems that operate at conditions that use resources effectively. In terms of components durability, the understanding of surface engineering wear frictional and lubrication dynamics has never been so important. Current research is focussed on modification technologies that can increase the surface durability of materials. The characteristics of the system reveal which surface engineering methods should be chosen and as a consequence it is essential to study the combination of surface treatment and contact mechanics. The accurate characterisation of the physical and chemical properties of materials requires the application of both experimental techniques and computer simulation methods in order to gain a correct analysis. A very wide range of materials, starting with metals through polymers and semiconductors to composites, necessitates a whole spectrum of characteristic experimental techniques and research methods. The papers in the book cover a number of topics, including: Computer methods and simulation; Experimental and measurement techniques; Mechanical characterisation and testing; Materials under extreme conditions; Polymers and plastics; Advances in composites; Micro and macro characterisation; Corrosion and erosion; Damage, fatigue and fracture; Recycled materials; Materials and energy; Surface problems and contact mechanics; Surface modification and treatments; Thick and thin coatings; Tribomechanics and wear mechanics; Biomechanical characterisation; Biomechanical applications and Case studies.

Download or read book Hygrothermal Behavior Building Pathology and Durability written by Vasco Peixoto de de Freitas and published by Springer Science & Business Media. This book was released on 2012-08-29 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main purpose of this book, Hygrothermal, Building Pathology and Durability, is to provide a collection of recent research works to contribute to the systematization and dissemination of knowledge related to construction pathology, hygrothermal behaviour of buildings, durability and diagnostic techniques and, simultaneously, to show the most recent advances in this domain. It includes a set of new developments in the field of building physics and hygrothermal behaviour, durability approach for historical and old buildings and building pathology vs. durability. The book is divided in several chapters that are a resume of the current state of knowledge for benefit of professional colleagues, scientists, students, practitioners, lecturers and other interested parties to network.

Download or read book Modernisation Mechanisation and Industrialisation of Concrete Structures written by Kim S. Elliott and published by John Wiley & Sons. This book was released on 2017-05-01 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modernisation, Mechanisation and Industrialisation of Concrete Structures discusses the manufacture of high quality prefabricated concrete construction components, and how that can be achieved through the application of developments in concrete technology, information modelling and best practice in design and manufacturing techniques.

Download or read book How Buildings Work written by Huw M A Evans and published by Routledge. This book was released on 2019-07-25 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: An understanding of building physics is fundamental for the design and construction of safe, functional, energy efficient buildings. Without it, occupants’ health and comfort is compromised, energy bills become unmanageable, or the building fabric itself can fail. But it’s not just about providing a heating source or stopping the cold coming in; at the heart of building physics is a fine balancing act: how much ventilation will be required for the occupants and how can that be provided without compromising the thermal performance? How will the layout and fenestration affect light levels and cooling demand? How Buildings Work provides construction professionals with a clear understanding of the basic mechanisms of physics and how they affect the performance and operation of buildings. Heat, air, moisture, sound, light and radioactivity are explained in turn, yet all the while reminding the reader that none of these phenomena can be considered in isolation when designing a building. Whether you’re a student trying to get your head round the basics, or a seasoned practitioner looking for a quick refresher course.

Download or read book Building Physics Heat Air and Moisture written by Hugo S. L. Hens and published by John Wiley & Sons. This book was released on 2023-08-24 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bad experiences with construction quality, the energy crises of 1973 and 1979, complaints about "sick buildings", thermal, acoustical, visual and olfactory discomfort, the need for good air quality, the move towards energy efficiency, decarbonization and sustainability ? all these have accelerated the development of a discipline that, for a long time, was hardly more than an academic exercise: building physics. The discipline embraces domains such as heat and mass transfer, building acoustics, lighting, indoor environmental quality, energy efficiency, and, in some countries, fire safety. Through the application of physical knowledge and its combination with information coming from other disciplines, building physics helps to under-stand the physical phenomena governing building parts, building envelope, whole building and built environment performance ? called urban physics. Today, building physics has be-come a key player on the road to highly performing new buildings and renovations. This book deals with heat, air and moisture transport in building parts or assemblies and whole buildings with emphasis on the building engineering applications. Compared to the third edition, this fourth edition has been expanded in chapter 1 to include the physical determination of the thermal conductivity of materials, together with an in-depth discussion of all the effects of thicker insulation layers. In chapter 2, additional information has been added on wind pressure and the evaluation of condensation inside the building com-ponents, while a new chapter 4 on material properties has been included. The whole book, including the figures, has been revised and restructured where necessary.

Download or read book European Building Construction Illustrated written by Francis D. K. Ching and published by John Wiley & Sons. This book was released on 2014-02-10 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first European edition of Francis DK Ching’s classic visual guide to the basics of building construction. For nearly four decades, the US publication Building Construction Illustrated has offered an outstanding introduction to the principles of building construction. This new European edition focuses on the construction methods most commonly used in Europe, referring largely to UK Building Regulations overlaid with British and European, while applying Francis DK Ching’s clear graphic signature style. It provides a coherent and essential primer, presenting all of the basic concepts underlying building construction and equipping readers with useful guidelines for approaching any new materials or techniques they may encounter. European Building Construction Illustrated provides a comprehensive and lucid presentation of everything from foundations and floor systems to finish work. Laying out the material and structural choices available, it provides a full understanding of how these choices affect a building′s form and dimensions. Complete with more than 1000 illustrations, the book moves through each of the key stages of the design process, from site selection to building components, mechanical systems and finishes. Illustrated throughout with clear and accurate drawings that effectively communicate construction processes and materials Provides an overview of the mainstream construction methods used in Europe Based around the UK regulatory framework, the book refers to European level regulations where appropriate. References leading environmental assessment methods of BREEAM and LEED, while outlining the Passive House Standard Includes emerging construction methods driven by the sustainability agenda, such as structural insulated panels and insulating concrete formwork Features a chapter dedicated to construction in the Middle East, focusing on the Gulf States

Download or read book Building Surveyor s Pocket Book written by Melanie Smith and published by Routledge. This book was released on 2021-05-26 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building Surveyor’s Pocket Book is an accessible encyclopaedia of matters vital to building surveyors. Well-illustrated with diagrams, pictures, tables, and graphs, it covers all essential elements of building pathology, building performance, and building construction terminology in a simple, accessible way for the practitioner and student. This Pocket Book provides a practical and portable reference text, working as a first-stop publication for those wishing to refresh their knowledge or in need of guidance on surveying practice. Working through fundamental principles in key practice areas, the book is not overly bound by the regulation and legislation of one region, and the principles can be applied internationally. This book is ideal reading for individual surveyors, practitioners, and students in building surveying, facilities management, refurbishment, maintenance, renovation, and services management. It is also of use for those interested in building forensics, building performance, pathology, and anyone studying for their RICS APC. Many other professions in architecture, contracting, engineering, and safety will also find the book of use when undertaking similar practice.

Download or read book Safety and Security Engineering V written by F. Garzia and published by WIT Press. This book was released on 2013-09-01 with total page 901 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organised by University of Rome 'La Sapienza', Italy, Wessex Institute of Technology, UK.