Download or read book Building from Waste written by Dirk E. Hebel and published by Birkhäuser. This book was released on 2014-09-25 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: ”Reduce, Reuse, Recycle, and Recover“ is the sustainable guideline that has replaced the ”Take, Make, Waste“ attitude of the industrial age. Based on their background at the ETH Zurich and the Future Cities Laboratory in Singapore, the authors provide both a conceptual and practical look into materials and products which use waste as a renewable resource. This book introduces an inventory of current projects and building elements, ranging from marketed products, among them façade panels made of straw and self-healing concrete, to advanced research and development like newspaper, wood or jeans denim used as isolating fibres. Going beyond the mere recycling aspect of reused materials, it looks into innovative concepts of how materials usually regarded as waste can be processed into new construction elements. The products are organized along the manufacturing processes: densified, reconfigured, transformed, designed and cultivated materials. A product directory presents all materials and projects in this book according to their functional uses in construction: load-bearing, self-supporting, insulating, waterproofing and finishing products.
Download or read book The Metal Lathe written by David J. Gingery and published by David J. Gingery Publishing, LLC. This book was released on 2014-07-11 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using castings from your charcoal foundry (see Book 1 in the series: The Charcoal Foundry by David Gingery) and simple hand methods (no machine tools needed!) you can build a sturdy and accurate bed for a metal lathe. Then additional castings, common hardware items and improvised equipment will add the headstock, tailstock, carriage and all the remaining parts to complete the lathe. Illustrated with photos and drawings to show you all you need to know about patterns, molding, casting and finishing the parts. The lathe specs. include a 7" swing over the bed and 12" between centers. Adjustable tailstock with set-over for taper turning. Adjustable gibs in sliding members and adjustable sleeve bearings in the headstock. A truly practical machine capable of precision work. Once you have a foundry to cast the parts and a lathe to machine them you can tackle more exotic projects.
Download or read book The Metal Shaper written by David J. Gingery and published by David J. Gingery Publishing, LLC. This book was released on 2014-07-11 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build your own Metal Shaper. Exotic is a mild adjective when applied to this shaper. It will cut splines, keyways, gears, sprockets, dovetail slides, flat and angular surfaces and irregular profiles. And all of these with a simple hand-ground lathe tool bit. Obsolete in modern industry, of course, because milling machines do the work much faster and cheaper. But you can’t beat a shaper for simplicity and economy in the home shop.The shaper has a 6" stroke and a mean capacity of 5" x 5", variable and adjustable stroke length, automatic variable cross feed and graduated collars. You will be proud to add this machine to your shop.
Download or read book Build Your Own Metal Working Shop from Scrap written by David J. Gingery and published by . This book was released on 2011-10-14 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Drill Press written by David J. Gingery and published by David J. Gingery Publishing, LLC. This book was released on 2015-05-19 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drill Press is also known as book 5 from the best selling 7 book series, 'Build Your Own Metal Working Shop From Scrap'. If you have done the projects progressively as the author did you will have done all your drilling with an electric hand drill up to this point. That’s tough and tedious work to say the least and you will really appreciate a drill press. In fact it would not make much sense to proceed to the deluxe accessories without one. You could buy one of course, But anyone could do that.... It drills to the center of a 12" circle with a quill travel of 2 1/2". Two stage speed reduction gives a low speed of 260 rpm for serious large hole drilling. Ball bearings in spindle driven pulley and idler make it smooth and quiet running. Quill feed is by cable or chain drive so there is no rack and pinion to cut.
Download or read book Designing Building the Sheet Metal Brake written by David J. Gingery and published by David J. Gingery Publishing, LLC. This book was released on 2015-07-23 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Sheet Metal Brake is also known as book 7 from the best selling 7 book series, 'Build Your Own Metal Working Shop From Scrap'. I almost left this one out of the series and I would have if it were not for my friends who tell me they are always wanting to bend some sheet metal for a project. This one uses no castings. It’s a welding project using standard structural steel and common hardware items to build a compact portable bending brake. Its a 15" brake as detailed but you can scale up or down in size within limits. Definitely not a heavy duty brake but you can make neat bends in 26 gauge metal to form duct, boxes, drawers, belt guards and dozens of items for your shop projects Some have beefed up the leaves and pivots so that metal as heavy as 20 gauge can be bent sharply.
Download or read book Scrap Easy written by Aisha Lumumba and published by . This book was released on 2014-04 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scrap Easy is a fun and sassy way to create an art quilt with little measuring and no stress. This pattern offers the quilter a chance to use saved scraps and possibly empty that scrap bag/box.
Download or read book Starting from Scrap written by Stephen H. Greer and published by . This book was released on 2010 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Stephen Greer arrived in Hong Kong in 1993, a recent college grad with no financing, scant experience, and only a notion of starting some kind of business. Fourteen years later, his company Hartwell Pacific was a $250-million enterprise and a player in the global scrap-metal recycling trade. Along the way he encountered cultural roadblocks, ruthless and sometime unscrupulous competitors, and learned critical lessons in what makes a young business thrive. This remarkable story is chronicled here with humor, suspense, and keen insights into the strategies that made Stephen Greer a highly successful entrepreneur." --Book Jacket.
Download or read book Scrap Basket Bounty written by Kim Brackett and published by That Patchwork Place. This book was released on 2018-09-18 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: Packed with projects that make it a snap to get scrappy, best-selling author Kim Brackett reveals a fun surprise waiting in these repeat-block designs: each pattern comes with two additional block arrangements. Sew the blocks, then rotate them this way and that for an abundance of possibilities. Sixteen patterns, three setting options per quilt, 48 projects in all - just choose a background fabric and throw your favorite colors into the mix to start the scrap-basket fun!
Download or read book A Quilting Life written by Sherri McConnell and published by C&T Publishing Inc. This book was released on 2013-02-12 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: “With its diverse selection of fabrics and designs, A Quilting Life is a fine pick for any quilter looking to produce family-oriented keepsake results.” —The Needlecraft Shelf Bring the handmade tradition home with these charming quilts and home accessories. Inspired by a grandmother who loved to sew for her family, quilter and blogger Sherri McConnell gives traditional patterns like hexagons, stars, snowballs, and Dresden Plates a new look featuring fabrics by some of today’s most popular designers. Nineteen cozy projects include pillows, tote bags, table runners, and larger quilts—quick and easy designs that make great gifts. “Sherri’s book is a treasure! It’s full of fun and straight-forward patterns for quilts, table toppers, pillows, bags and more—all the goodies to make a cozy home.” —Thimbleanna “Would you like the opportunity to make tomorrow’s heirlooms in today’s vast selection of prints? . . . If so, this could be the reference book that will get you started. There are 19 projects, mainly focusing on handmade household items but including some larger quilts too.” —Fabrications Quilting for You “Beautiful inspiration if you are a seasoned quilter, but also a great resource with clear and in some cases, simple patterns for newbies as well.” —Diary of a Quilter “Color photos of finished needlework projects accompany step-by-step diagrams and assembly patterns, while at-a-glance sidebars covering materials and cutting allow needleworkers to gauge the complexity of each project.” —The Needlecraft Shelf
Download or read book How To Weld Scrap Metal Art written by Barbie The Welder and published by Barbie the Welder. This book was released on 2019-11-26 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how to make welded art today! Barbie The Welder shows you how to easily weld scrap metal art! Each step is pictured for these 30 welding projects to make the creation process straight forward and easy to follow for the beginner or advanced welder! Make gifts or start a metal art business! Projects include Keychain, star, business card holder, scrap heart, scrap words, snail, feathers, flower, bicycle, owl, drink coasters, bike, coat rack, dog, bulldozer, candle holders, steampunk wine or whisky rack, steampunk bookends, pencil holder, jewelry tree, scorpion, fisherman, person, rose, spider, midevil battleaxe, skeleton hand and arm, fly fisherman.
Download or read book Scrap Republic written by Emily Cier and published by C&T Publishing Inc. This book was released on 2011 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Popular patternmaker Emily Cier sews up all the colors of the rainbow in her second collection of all-new patterns that include wallhangings and lap quilts. Divided into sections for the little stasher or the big stasher, this book gives separate cutting instructions for working with all scraps, or with all new fabrics. Emily brings a modern aesthetic to patchwork blocks with a joyful jolt of color!
Download or read book ScrapKins Junk Re Thunk written by Brian Yanish and published by Macmillan. This book was released on 2016-03-29 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents information about using materials that people throw away, including empty soda bottles and cans, milk cartons, cereal boxes, and bottlecaps, to make Scrapkins, new things that are fun and useful.
Download or read book Scrap City written by D. S. Thornton and published by Capstone. This book was released on 2015-08 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Jerome discovers an entire city beneath the junkyard. But when it's under attack, can he save it?
Download or read book Waste To Profit W t P written by Linda Zikhona Linganiso and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of a circular economy in the construction sector captures global material flow through product design, inverse logistics, innovation and collaborations. The circulation of the economy takes into consideration global population influence, which affects the economy through a variety of construction product flows in particular. The increase in consumers means increasing product and services which participate in different waste streams. The emerging sustainable development in the construction industry requires the recycling of waste materials to reduce the negative environmental impact of construction activities. Accumulation and management of construction wastes is also becoming a major environmental and economical concern in many developing countries. Huge volumes of waste generated end up piled on landfill sites or illegally dumped, posing serious health and ecological problems. In the construction industry, recycling of waste concrete, masonry, cement, gypsum, to mention but a few, has become an important aspect due to the continued increase of construction wastes and depletion of natural aggregates. Why not establish a business system that is specifically designed to do much more value addition to the construction wastes and develop products which are not only in demand locally but internationally, to encourage exports for maximum financial gain. This book aims to analyze the current business model in the construction sector and the current legislation concerning waste management. It also highlights efforts required in order to refine the recycling methods in favor of a circular economy in the constuction industry. In support of a transition to a low carbon economy, different types of materials which can be produced from the construction wastes are indicated including processes which are used to obtain the final products. The market demand including penetration of the resulting products are given extensively. Policies and regulations to govern these undertakings are highlighted also. The municipalities will learn to redirect the local construction industries on how to avoid dumping at landfill sites as the space has currently become an issue. Researchers globally will learn how to go up through the Technology Readiness Levels (TRL) from basic research through prototype development and finally up to commercialization in projects related to the construction.
Download or read book The Milling Machine written by David J. Gingery and published by David J. Gingery Publishing, LLC. This book was released on 2015-01-01 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Milling Machine is also known as book 4 from the best selling 7 book series, 'Build Your Own Metal Working Shop From Scrap'. Especially designed for the developing home shop. It’s a horizontal miller, but it has the full range of vertical mill capability when used with the angle plate on the work table. Extremely rigid and versatile. The work table is 2 3/8" x 12" with a 3/8" T-slot and it travels a full 12". Eight speeds from 43 rpm to 2430 rpm. The spindle raises as much as 6" above the work table and the transmission is designed to follow the vertical travel without straining the column or changing the belt tension. Accessories included in the project are angle plate, face plate, fly cutter, tail-stand and compound slide assembly with which you can do large swing lathe jobs. Still no need to look for outside help. It’s a miller and more, and you can build it your self.
Download or read book Concepts for Reuse and Recycling of Construction and Demolition Waste written by and published by DIANE Publishing. This book was released on with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:
