Download or read book Blast Effects on Buildings written by Geoffrey Mays and published by Thomas Telford. This book was released on 1995 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide is aimed at all engineers and architects involved in building design, focusing on the importance of constructing buildings which minimise damage to people and property in the event of an explosion.
Download or read book Blast Effects on Buildings written by David Cormie and published by Thomas Telford Publishing. This book was released on 2009 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflects developments in the field of blast engineering since the early 1990s. Combining coverage of the design standards, codes and materials with an appreciation of the needs and demands of the designer, this book provides the engineer with a comprehensive source of reference for the main elements of blast engineering design in modern practice.
Download or read book ISC Security Design Criteria for New Federal Office Buildings and Major Modernization Projects written by National Research Council and published by National Academies Press. This book was released on 2003-05-16 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: In November 1999, GSA and the U.S. Department of State convened a symposium to discuss the apparently conflicting objectives of security from terrorist attack and the design of public buildings in an open society. The symposium sponsors rejected the notion of rigid, prescriptive design approaches. The symposium concluded with a challenge to the design and security professions to craft aesthetically appealing architectural solutions that achieve balanced, performance-based approaches to both openness and security. In response to a request from the Office of the Chief Architect of the Public Buildings Service, the National Research Council (NRC) assembled a panel of independent experts, the Committee to Review the Security Design Criteria of the Interagency Security Committee. This committee was tasked to evaluate the ISC Security Design Criteria to determine whether particular provisions might be too prescriptive to allow a design professional "reasonable flexibility" in achieving desired security and physical protection objectives.
Download or read book Blast Effects on Buildings written by David Cormie and published by ICE Publishing. This book was released on 2019-12-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blast Effects on Buildings showcases the latest practical guidance on designing buildings to optimise their resilience to blast loading. Focused specifically on the design of commercial buildings, it is an indispensable guide to help engineers reduce the risks posed to building occupants and businesses from terrorist attacks and other explosions.
Download or read book Protecting Buildings from Bomb Damage written by Committee on Feasibility of Applying Blast-Mitigating Technologies and Design Methodologies from Military Facilities to Civilian Buildings and published by National Academies Press. This book was released on 1995-11-09 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a brief overview of worldwide terrorist activity and reviews technologies and methods for designing blast resistant buildings. These techniques, primarily developed by the military, have applicability and relevance to the design of civilian structures. The volume recommends that a program of applied research and technology transfer be undertaken to hasten the availability and utility of these techniques to the civilian building community.
Download or read book Blast Protection of Buildings written by American Society of Civil Engineers and published by . This book was released on 2023-03-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standard ASCE/SEI 59-22 provides minimum requirements for planning, design, construction, and assessment of new and existing buildings subject to the effects of accidental or malicious explosions.
Download or read book Protecting People and Buildings from Terrorism written by National Research Council and published by National Academies Press. This book was released on 2002-01-31 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concerned with the vulnerability of U.S. civilian and military personnel to terrorist bombing attacks, the U.S. Congress directed the Department of Defense to undertake a comprehensive research and testing program aimed at protecting people in buildings from such attacks. The Blast Mitigation for Structures Program (BMSP) was initiated in 1997 and has produced a large volume of experimental and analytical data that will permit the design of new, more robust buildings as well as the development of methods to retrofit a large number of vulnerable existing structures. This report reviews the BMSP program and investigates a process that would use existing institutional infrastructures (i.e., building code and standards-writing organizations, professional and technical organizations, universities, and research centers) to disseminate knowledge.
Download or read book Increasing Blast and Fire Resistance in Buildings written by United States. Office of Civil Defense and published by . This book was released on 1970 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Prediction of Blast Loading and Its Impact on Buildings written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A bomb explosion within or immediately nearby a building can cause catastrophic damage on the building's external and internal structural frames, collapsing of walls, blowing out of large expanses of windows, and shutting down of critical life-safety systems. Loss of life and injuries to occupants can result from many causes, including direct blast-effects, structural collapse, debris impact, fire, and smoke. The indirect effects can combine to inhibit or prevent timely evacuation, thereby contributing to additional casualties. In addition, major catastrophes resulting from gas-chemical explosions result in large dynamic loads, greater than the original design loads, of many structures. Due to the threat from such extreme loading conditions, efforts have been made during the past three decades to develop methods of structural analysis and design to resist blast loads. Studies were conducted on the behavior of structural concrete subjected to blast loads. These studies gradually enhanced the understanding of the role that structural details play in affecting the behavior. The response of simple RC columns subjected to constant axial loads and lateral blast loads was examined. The finite element package ANSYS was used to model RC column with different boundary conditions and using the mesh less method to reduce mesh distortions. For the response calculations, a constant axial force was first applied to the column and the equilibrium state was determined. Next, a short duration, lateral blast load was applied and the response time history was calculated. The analysis and design of structures subjected to blast loads require a detailed understanding of blast phenomena and the dynamic response of various structural elements. This gives a comprehensive overview of the effects of explosion on structures.
Download or read book Handbook for Blast Resistant Design of Buildings written by Donald O. Dusenberry and published by John Wiley & Sons. This book was released on 2010-01-26 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unique single reference supports functional and cost-efficient designs of blast resistant buildings Now there's a single reference to which architects, designers, and engineers can turn for guidance on all the key elements of the design of blast resistant buildings that satisfy the new ASCE Standard for Blast Protection of Buildings as well as other ASCE, ACI, and AISC codes. The Handbook for Blast Resistant Design of Buildings features contributions from some of the most knowledgeable and experienced consultants and researchers in blast resistant design. This handbook is organized into four parts: Part 1, Design Considerations, sets forth basic principles, examining general considerations in the design process; risk analysis and reduction; criteria for acceptable performance; materials performance under the extraordinary blast environment; and performance verification for technologies and solution methodologies. Part 2, Blast Phenomena and Loading, describes the explosion environment, loading functions needed for blast response analysis, and fragmentation and associated methods for effects analysis. Part 3, System Analysis and Design, explains the analysis and design considerations for structural, building envelope, component space, site perimeter, and building system designs. Part 4, Blast Resistant Detailing, addresses the use of concrete, steel, and masonry in new designs as well as retrofitting existing structures. As the demand for blast resistant buildings continues to grow, readers can turn to the Handbook for Blast Resistant Design of Buildings, a unique single source of information, to support competent, functional, and cost-efficient designs.
Download or read book Structures to Resist the Effects of Accidental Explosions written by and published by . This book was released on 1991 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Explosion Resistant Buildings written by M. Y. H. Bangash and published by Springer Science & Business Media. This book was released on 2005-12-16 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent book highlights all aspects of the analysis and design of buildings subject to impact, explosion and fire. It is a definitive reference book and contains 10 chapters from a wide international prospective. Three-dimensional finite element and discrete element techniques are included. They are applied to buildings such as the World Trade Center (WTC Twin Towers) and the Federal Building in Oklahoma on the basis of the designers drawings, data and other information. Many small case studies are also included. The book has a comprehensive bibliography and a large appendix providing background analysis and computer subroutines of recently developed programs.
Download or read book Nuclear Explosion Effects on Structures and Protective Construction written by U.S. Atomic Energy Commission and published by . This book was released on 1961 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Against Blast written by S. Syngellakis and published by WIT Press. This book was released on 2013 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Terrorist attacks and other destructive incidents caused by explosives have, in recent years, prompted considerable research and development into the protection of structures against blast loads. For this objective to be achieved, experiments have been performed and theoretical studies carried out to improve our assessments of the intensity as well as the space-time distribution of the resulting blast pressure on the one hand and the consequences of an explosion to the exposed environment on the other.This book aims to enhance awareness on and understanding of these topical issues through a collection of relevant, Transactions of the Wessex Institute of Technology articles written by experts in the field. The book starts with an overview of key physics-based algorithms for blast and fragment environment characterisation, structural response analyses and structural assessments with reference to a terrorist attack in an urban environment and the management of its inherent uncertainties.A subsequent group of articles is concerned with the accurate definition of blast pressure, which is an essential prerequisite to the reliable assessment of the consequences of an explosion. Other papers are concerned with alternative methods for the determination of blast pressure, based on experimental measurements or neural networks. A final group of articles reports investigations on predicting the response of specific structural entities and their contents.The book concludes with studies on the effectiveness of steel-reinforced polymer in improving the performance of reinforced concrete columns and the failure mechanisms of seamless steel pipes used in nuclear industry.
Download or read book Blast Effects on Buildings Third Edition written by David Cormie and published by . This book was released on 2019 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Damage from Atomic Explosion and Design of Protective Structures written by United States. Department of Defense and published by . This book was released on 1950 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Explosive Shocks in Air written by Gilbert F. Kinney and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: A purpose of science is to organize diversified factual knowledge into a coherent body of information, and to present this from the simplest possible viewpoint. This is a formidable task where our knowledge is incomplete, as it is with explosions. Here one runs the risk of oversimplification, naivete, and incom pleteness. Nevertheless a purpose of this work is to present as simply as possible a general description of the basic nature of explosions. This treatise should be of interest to all who are working with explosives such as used in construction or in demolition work, in mining operations, or in military applications. It should also be of interest to those concemed with disasters such as explosions or earthquakes, to those involved in civil defense precautions, and to those concemed with defense against terrorists. That is, this material should be of interest to all who wish to utilize, or to avoid, the effects of explosions as weil as to those whose interest is primarily scientific in nature.