Download or read book Structural Materials and Global Climate written by Carbon Task Group (U.S.) and published by . This book was released on 2017 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: This primer on greenhouse gas emissions for the structural engineering community focuses on the impact of structural materials and systems on global climate.

Download or read book Seismic Design of Precast Concrete Building Structures written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2003-01-01 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this state-of-art report is to present current practices for use of precast and prestressed concrete in countries in seismic regions, to recommend good practice, and to discuss current developments. The report has been drafted by 30 contributors from nine different countries. This state-of-art report covers: state of the practice in various countries; advantages and disadvantages of incorporating precast reinforced and prestressed concrete in construction; lessons learned from previous earthquakes; construction concepts; design approaches; primary lateral load resisting systems (precast and prestressed concrete frame systems and structural walls including dual systems) diaphragms of precast and prestressed concrete floor units; modelling and analytical methods; gravity load resisting systems; foundations; and miscellaneous elements (shells, folded plates, stairs and architectural cladding panels). Design equations are reported where necessary, but the emphasis is on principles. Ordinary cast-in-place reinforced concrete is not considered in this report. This fib state-of-the-art report is intended to assist designers and constructors to provide safe and economical applications of structural precast concrete and at the same time to allow innovation in design and construction to continue. This Bulletin N° 27 was approved as an fib state-of-art report in autumn 2002 byfib Commission 7, Seismic design.

Download or read book Bridge Engineering written by Hamid Yaghoubi and published by BoD – Books on Demand. This book was released on 2018-05-23 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: A bridge is a structure built to span the physical obstacles without closing the way underneath, such as a body of water, valley, or road, for the purpose of providing the passage over the obstacle. Bridge engineering is an engineering discipline branching from civil engineering that involves the planning, design, construction, operation, and maintenance of bridges to ensure safe and effective transportation of vehicles, people and goods. This book Bridge Engineering includes the main topics and the basic principles of bridge engineering and provides the full scope of current information necessary for effective and cost-conscious contemporary bridge. It reflects new engineering and building developments, the most current design methods, and the latest industry standards and policies. It provides a comprehensive overview of the significant characteristics for bridge engineering. It highlights the recent advancements, requirements, improvements, and details of the latest techniques in the global market. It contains a collection of the latest research developments on the bridge engineering. It comprehensively covers the basic theory and practice in sufficient depth to provide a solid grounding to bridge engineers. It helps readers to maximize effectiveness in all facets of bridge engineering. This professional book as a credible source and a valuable reference can be very applicable and useful for all professors, researchers, engineers, practicing professionals, trainee practitioners, students and others who are interested in the bridge projects.

Download or read book Proceedings of the 10th International Conference on Electrorheological Fluids and Magnetorheological Suspensions written by Faramarz Gordaninejad and published by World Scientific. This book was released on 2007 with total page 843 pages. Available in PDF, EPUB and Kindle. Book excerpt: ERMR 2006 included invited speakers, technical presentations, poster presentations, and a student paper competition. At the conference banquet, Dr. David Carlson of Lord Corporation addressed the conference attendees and gave a stirring speech on the history of ER and MR fluids, as well as current and future applications. A unique feature of the ERMR Conferences is that they comprehensively cover issues ranging from physics to chemistry to engineering applications of ER and MR materials held in a general session to enhance the interaction between the scientists and engineers. The sessions in ERMR 2006 were organized based into two Symposia: a) Materials and b) Applications. Topics covered in the Materials Symposium included: mechanisms, preparation, and characterization of ER and MR materials. Topics covered in the Applications Symposium included: ER and MR devices, control systems, system integration, and applications. This structure was implemented in order to enable interaction between attending scientists and engineers in both the Materials Symposium and the Applications Symposium, and to enhance the free flow of ideas, and the potential collaborative research opportunities. Sample Chapter(s). Chapter 1: Transient Behavior of Electrorheological Fluids in Shear Flow (471 KB). Contents: The Physical Mechanism to Reduce Viscosity of Liquid Suspensions (R Tao); Polar Molecular Type Electrorheological Fluids (K Lu et al.); Yield Stress in Ferrofluids? (H Shahnazian & S Odenbach); The Effect of Dwell Time on the Rheological Behavior of MR Fluids (M Ahmadian & F D Goncalves); The Methods of Measuring Shear Stress of Polar Molecule Dominated ER Fluids (R Shen et al.); Electrosensitive Lubricants (E V Korobko et al.); Study on Characteristics of an Electrorheological Fluid Coupling (Y Meng et al.); On the Control of a MR Torque Transfer Device (M H Elahinia et al.); Comparison of ERF Clutch Designs (D J Ellam et al.); Examination of Throughflow in a Radial ERF Clutch (S M Chen et al.); Two-Layered Magnetic Fluid Sloshing in a Rectangular Container (S Yoshida et al.); Design of the High-Performance MR Brake and Its Characteristics (T Kikuchi et al.); and other papers. Readership: Mechanical engineers, electrical engineers, physicists, chemists, chemical engineers and materials scientists.

Download or read book Structural Engineer s Pocket Book 2nd Edition written by Fiona Cobb and published by Elsevier. This book was released on 2009 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Now in its second edition, the Structural Engineer's Pocket Book is a comprehensive pocket reference guide for professional and student structural engineers, particularly those taking the iStructE Part 3 Exam. The combination of tables, data, facts, formulae and rules of thumb make it a valuable aid in scheme design for structural engineers in the office, in transit or on site." "Concise and precise, this second edition is updated to reflect changes to the British Standards, which are used and referenced throughout, as well as the addition of a new section on sustainability. Other subject areas include timber, masonry, steel, concrete, aluminium and glass." --Book Jacket.

Download or read book Reliability and Optimization of Structural Systems Assessment Design and Life Cycle Performance written by Dan M. Frangopol and published by CRC Press. This book was released on 2007-06-28 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focussing on structural reliability methods, reliability-based optimization, structural system reliability and risk analysis, lifetime performance and various applications in civil engineering. Invaluable to all concerned with structural system reliability and optimization, especially students, engineers, and workers in research and development.

Download or read book Challenges Opportunities and Solutions in Structural Engineering and Construction written by Nader Ghafoori and published by CRC Press. This book was released on 2009-10-29 with total page 1890 pages. Available in PDF, EPUB and Kindle. Book excerpt: Challenges, Opportunities and Solutions in Structural Engineering and Construction addresses the latest developments in innovative and integrative technologies and solutions in structural engineering and construction, including: Concrete, masonry, steel and composite structures; Dynamic impact and earthquake engineering; Bridges and

Download or read book Stadia Arenas and Grandstands written by P. Thompson and published by CRC Press. This book was released on 2002-11-01 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the International Concrete Society Conference held at the Cardiff International Arena and will be of interest to architects and planners, facility managers and consultants in the fields of engineering, environmental control and services and leisure managemnet, media facilities and to client organizations planning major sports and '

Download or read book Transactions of the American Society of Civil Engineers written by American Society of Civil Engineers and published by . This book was released on 1997 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. 29-30 include papers of the International Engineering Congress, Chicago, 1893; v. 54 includes papers of the International Engineering Congress, St. Louis, 1904.

Download or read book Bridge Engineering Handbook Five Volume Set written by Wai-Fah Chen and published by CRC Press. This book was released on 2014-01-24 with total page 3042 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 140 experts, 14 countries, and 89 chapters are represented in the second edition of the Bridge Engineering Handbook. This extensive collection provides detailed information on bridge engineering, and thoroughly explains the concepts and practical applications surrounding the subject, and also highlights bridges from around the world. This second edition of the bestselling Bridge Engineering Handbook covers virtually all the information an engineer would need to know about any type of bridge-from planning to construction to maintenance. It contains more than 2,500 tables, charts, and illustrations in a practical, ready-to-use format. An abundance of worked-out examples gives readers numerous practical step-by-step design procedures. Special attention is given to rehabilitation, retrofit, and maintenance. Coverage also includes seismic design and building materials. Thoroughly revised and updated, this second edition contains 26 new chapters.

Download or read book Building Materials in Civil Engineering written by Haimei Zhang and published by Elsevier. This book was released on 2011-05-09 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: The construction of buildings and structures relies on having a thorough understanding of building materials. Without this knowledge it would not be possible to build safe, efficient and long-lasting buildings, structures and dwellings. Building materials in civil engineering provides an overview of the complete range of building materials available to civil engineers and all those involved in the building and construction industries.The book begins with an introductory chapter describing the basic properties of building materials. Further chapters cover the basic properties of building materials, air hardening cement materials, cement, concrete, building mortar, wall and roof materials, construction steel, wood, waterproof materials, building plastics, heat-insulating materials and sound-absorbing materials and finishing materials. Each chapter includes a series of questions, allowing readers to test the knowledge they have gained. A detailed appendix gives information on the testing of building materials.With its distinguished editor and eminent editorial committee, Building materials in civil engineering is a standard introductory reference book on the complete range of building materials. It is aimed at students of civil engineering, construction engineering and allied courses including water supply and drainage engineering. It also serves as a source of essential background information for engineers and professionals in the civil engineering and construction sector. - Provides an overview of the complete range of building materials available to civil engineers and all those involved in the building and construction industries - Explores the basic properties of building materials featuring air hardening cement materials, wall and roof materials and sound-absorbing materials - Each chapter includes a series of questions, allowing readers to test the knowledge they have gained

Download or read book Bridge Engineering Handbook written by Wai-Fah Chen and published by CRC Press. This book was released on 2023-01-06 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 1999: The Bridge Engineering Handbook is a unique, comprehensive, and state-of-the-art reference work and resource book covering the major areas of bridge engineering with the theme "bridge to the 21st century." This third volume includes sections covering construction and maintenance, special topics, and worldwide practice.

Download or read book Electrorheological Fluids And Magnetorheological Suspensions Proceedings Of The 10th International Conference On Ermr 2006 written by Faramarz Gordaninejad and published by World Scientific. This book was released on 2007-10-17 with total page 843 pages. Available in PDF, EPUB and Kindle. Book excerpt: ERMR 2006 included invited speakers, technical presentations, poster presentations, and a student paper competition. At the conference banquet, Dr. David Carlson of Lord Corporation addressed the conference attendees and gave a stirring speech on the history of ER and MR fluids, as well as current and future applications. A unique feature of the ERMR Conferences is that they comprehensively cover issues ranging from physics to chemistry to engineering applications of ER and MR materials held in a general session to enhance the interaction between the scientists and engineers. The sessions in ERMR 2006 were organized based into two Symposia: a) Materials and b) Applications. Topics covered in the Materials Symposium included: mechanisms, preparation, and characterization of ER and MR materials. Topics covered in the Applications Symposium included: ER and MR devices, control systems, system integration, and applications. This structure was implemented in order to enable interaction between attending scientists and engineers in both the Materials Symposium and the Applications Symposium, and to enhance the free flow of ideas, and the potential collaborative research opportunities.

Download or read book Engineering for Sustainable Communities written by William Edward Kelly and published by . This book was released on 2017 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering for Sustainable Communities: Principles and Practices defines and outlines sustainable engineering methods for real-world engineering projects.

Download or read book Practical Applications of Fuzzy Technologies written by Hans-Jürgen Zimmermann and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the late 1980s, a large number of very user-friendly tools for fuzzy control, fuzzy expert systems, and fuzzy data analysis have emerged. This has changed the character of this area and started the area of `fuzzy technology'. The next large step in the development occurred in 1992 when almost independently in Europe, Japan and the USA, the three areas of fuzzy technology, artificial neural nets and genetic algorithms joined forces under the title of `computational intelligence' or `soft computing'. The synergies which were possible between these three areas have been exploited very successfully. Practical Applications of Fuzzy Sets focuses on model and real applications of fuzzy sets, and is structured into four major parts: engineering and natural sciences; medicine; management; and behavioral, cognitive and social sciences. This book will be useful for practitioners of fuzzy technology, scientists and students who are looking for applications of their models and methods, for topics of their theses, and even for venture capitalists who look for attractive possibilities for investments.

Download or read book Bridge Engineering Handbook Second Edition written by Wai-Fah Chen and published by CRC Press. This book was released on 2014-01-24 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 140 experts, 14 countries, and 89 chapters are represented in the second edition of The Bridge Engineering Handbook. This extensive collection highlights bridge engineering specimens from around the world, contains detailed information on bridge engineering, and thoroughly explains the concepts and practical applications surrounding the subject. Published in five books: Fundamentals, Superstructure Design, Substructure Design, Seismic Design, and Construction and Maintenance, this new edition provides numerous worked-out examples that give readers step-by-step design procedures, includes contributions by leading experts from around the world in their respective areas of bridge engineering, contains 26 completely new chapters, and updates most other chapters. It offers design concepts, specifications, and practice, as well as the various types of bridges. The text includes over 2,500 tables, charts, illustrations and photos. The book covers new, innovative, and traditional methods and practices, explores rehabilitation, retrofit, and maintenance, and examines seismic design, and building materials. The first book, Fundamentals contains 22 chapters, and covers aesthetics, planning, design specifications, structural modeling, fatigue and fracture. What’s New in the Second Edition: • Covers the basic concepts, theory and special topics of bridge engineering • Includes seven new chapters: Finite Element Method, High Speed Railway Bridges, Concrete Design, Steel Design, Structural Performance Indicators for Bridges, High Performance Steel, and Design and Damage Evaluation Methods for Reinforced Concrete Beams under Impact Loading • Provides substantial updates to existing chapters, including Conceptual Design, Bridge Aesthetics: Achieving Structural Art in Bridge Design, and Application of Fiber Reinforced Polymers in Bridges This text is an ideal reference for practicing bridge engineers and consultants (design, construction, maintenance), and can also be used as a reference for students in bridge engineering courses.

Download or read book Structural Health Monitoring 2000 written by Fu-Kuo Chang and published by CRC Press. This book was released on 1999-09-07 with total page 1104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprising 102 papers presented by researchers from all over the world, the proceedings of this workshop contain current information about a variety of structural health monitoring technologies, as well as their current and potential applications in various fields. Emphasis is placed on those technologies that are promising for future applications in industry and government and the infrastructures that are needed to support such technological development. The content of the workshop is divided into keynote presentations (ten altogether), aerospace applications, general applications, civil applications, integration and systems, sensors, and signal processing and diagnostic methods. Includes the editor's summary report on the results of the panel discussions and presentations from the First International Workshop on Structural Health Monitoring held at Stanford U. in September 1997. Annotation c. Book News, Inc., Portland, OR (booknews.com)