Download or read book Advances in Clean Energy Technologies written by Prashant V. Baredar and published by Springer Nature. This book was released on 2021-05-30 with total page 1130 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the international conference on Innovations in Clean Energy Technologies (ICET 2020) and examines a range of durable, energy efficient and next-generation smart green technologies for sustainable future by reflecting on the trends, advances and development taking place all across the globe. The topics covered include smart technologies based product, energy efficient systems, solar and wind energy, carbon sequestration, green transportation, green buildings, energy material, biomass energy, smart cites, hydro power, bio-energy and fuel cell. The book also discusses various performance attributes of these clean energy technologies and their workability and carbon footprint. The book will be a valuable reference for beginners, researchers and professionals interested in clean energy technologies.

Download or read book Encyclopedia of Environmental Science and Engineering Sixth Edition Print Version written by Edward N. Ziegler and published by CRC Press. This book was released on 2012-06-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The authors ... continue the pursuit of new knowledge, calculated to bring new fruits of health, safety, and comfort to man and his environs. The charms, as well as the subtle hazards, of the terms ‘conservation, preservation, and ecology’ need to be crystallized so that the public and their decision-makers practice this complex art with clearer conception and perception than is apparent in recent bitter confrontations." —From the Foreword to the Fourth Edition by Abel Wolman What’s New in This Edition: New entries on environmental and occupational toxicology, geoengineering, and lead abatement Twenty-five significantly updated entries, including expanded discussion of water supplies and waste water treatment, biomass and renewable energy, and international public health issues An expanded list of acronyms and abbreviations Encyclopedia of Environmental Science and Engineering, Sixth Edition is still the most comprehensive, authoritative reference available in the field. This monumental two-volume encyclopedia now includes entries on topics ranging from acid rain, air pollution, and community health to environmental law, instrumentation, modeling, alternative energy, radioactive waste, and water treatment. The broad coverage includes highly specialized topics as well as those that transcend traditional disciplinary boundaries, reflecting the interdisciplinary skills and knowledge required by environmental researchers and engineers. Featuring expert contributors representing industry, academia, and government agencies, the encyclopedia presents fundamental concepts and applications in environmental science and engineering. The entries are supported by extensive figures, photographs, tables, and equations. This sixth edition includes new material on water supplies and wastewater treatment, biomass and renewable energy, and international public health issues. New entries cover environmental and occupational toxicology, geoengineering, and lead abatement. The Encyclopedia of Environmental Science and Engineering provides a view of the field that helps readers understand, manage, and respond to threats to the human environment. Contact us to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367 / (email) [email protected] International: (Tel) +44 (0) 20 7017 6062 / (email) [email protected]

Download or read book Applied Mathematics Computational Science and Engineering written by Wseas Llc and published by . This book was released on 2014-10-02 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: 2014 International Conference on Applied Mathematics, Computational Science & Engineering (AMCSE 2014)

Download or read book Biomass Biofuels Biochemicals written by Ganti S. Murthy and published by Elsevier. This book was released on 2021-09-17 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systems analysis for sustainability is an emerging discipline where technologies, processes or policies are evaluated comprehensively for sustainability. Trifold sustainability metrics such as technical feasibility, economic viability and environmental impacts are commonly used to assess sustainability. In addition to these metrics, it is important to consider resource sustainability, policies and social aspects for evaluating the sustainability of any proposed alternative. Green-Economy: Systems Analysis for Sustainability provides a theoretical background to perform such analyses and detailed case studies. The first part of this book introduces methods and tools to perform technical feasibility analysis, economic viability analysis, environmental impacts assessment, environmental risk assessment, resource sustainability assessment, policy and social aspects of technologies, general logic-based sustainability assessment for green products and introduces resilience thinking. The second part of the book focuses on case studies with an emphasis on solar energy, biofuels and bioproducts from across the globe. - Covers sustainability analysis for bioeconomy - Provides theoretical background for conducting sustainability analysis - Includes case studies from around the world that use these methods - Examines techno-economic analysis, life cycle assessment, resource assessment, environmental risk analysis, policy and social aspects of technologies

Download or read book Computational Fluid Dynamics 2008 written by Haecheon Choi and published by Springer. This book was released on 2011-04-28 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are delighted to present this book which contains the Proceedings of the Fifth International Conference on Computational Fluid Dynamics (ICCFD5), held in Seoul, Korea from July 7 through 11, 2008. The ICCFD series has established itself as the leading international conference series for scientists, mathematicians, and engineers specialized in the computation of fluid flow. In ICCFD5, 5 Invited Lectures and 3 Keynote Lectures were delivered by renowned researchers in the areas of innovative modeling of flow physics, innovative algorithm development for flow simulation, optimization and control, and advanced multidisciplinary - plications. There were a total of 198 contributed abstracts submitted from 25 countries. The executive committee consisting of C. H. Bruneau (France), J. J. Chattot (USA), D. Kwak (USA), N. Satofuka (Japan), and myself, was responsible for selection of papers. Each of the members had a separate subcommittee to carry out the evaluation. As a result of this careful peer review process, 138 papers were accepted for oral presentation and 28 for poster presentation. Among them, 5 (3 oral and 2 poster presentation) papers were withdrawn and 10 (4 oral and 6 poster presentation) papers were not presented. The conference was attended by 201 delegates from 23 countries. The technical aspects of the conference were highly beneficial and informative, while the non-technical aspects were fully enjoyable and memorable. In this book, 3 invited lectures and 1 keynote lecture appear first. Then 99 c- tributed papers are grouped under 21 subject titles which are in alphabetical order.

Download or read book Economics of Mercury Control written by Leslie L. Sloss and published by . This book was released on 2008 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report summarises the regulatory situation regarding mercury emissions in different countries, the status of mercury control technology development, and the costs of emission reduction.Where possible, the economic evaluation includes any increased costs due to changes in waste disposal options for coal combustion by-products. The report also considers mercury control options during coal processing and preparation

Download or read book Quality Assurance Handbook for Air Pollution Measurement Systems written by and published by . This book was released on 1984 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Characterization of Air Quality Stationary Source Emissions Method for the Determination of Asbestos Plant Emissions by Fibre Count Measurement written by British Standards Institute Staff and published by . This book was released on 1991-08-30 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Air, Quality, Air pollution, Particulate air pollutants, Industrial air pollutants, Asbestos, Fibres, Ducting, Chimneys, Flues, Counting, Concentration, Microscopic analysis, Filtration, Test equipment, Sampling methods, Sample location, Safety measures, Sampling equipment, Acceptance (approval), Accuracy

Download or read book National emission standards for hazardous air pollutants for source categories paper and other web coating operations background information for proposed standards written by and published by DIANE Publishing. This book was released on 2000 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Continuous Emission Monitoring written by James A. Jahnke and published by John Wiley & Sons. This book was released on 2000-04-03 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuous Emission Monitoring, Second Edition is the most comprehensive source of information on the latest technical and regulatory issues that are affecting the design, application, and certification of CEM systems. It provides a thorough discussion of CEM systems, how they work, their advantages and drawbacks, and the regulatory requirements that govern their operation. Equally suitable for an environmental engineer in a plant or control agency, a CEM user, or an inspector/auditor, this book makes it possible to assess the operating characteristics of commercial systems and to evaluate them for a specific application. Thoroughly referenced, with numerous illustrations, it features: * A comprehensive review of regulations, with clear information on changes * New measurement techniques, designs for "smart" analyzers, and advanced monitoring approaches * New chapters on flow rate and continuous particulate monitors * Techniques for recordkeeping, generating reports, and using data acquisition and handling systems * Quality assurance/quality control programs CEMs are becoming a fact of life in regulatory programs throughout the United States, Canada, Europe, and Asia. Environmental professionals as well as vendors and manufacturers will turn to Continuous Emission Monitoring for clear, up-to-date information on the technical and regulatory issues shaping this dynamic field.

Download or read book Guidelines for MACT determinations under Section 112 j requirements written by and published by DIANE Publishing. This book was released on 2002 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Quality Assurance Handbook for Air Pollution Measurement Systems Stationary source specific methods written by and published by . This book was released on 1976 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Standards on Noise Measurements Rating Schemes and Definitions written by Jack M. Fath and published by . This book was released on 1973 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Performance Specifications for Stationary source Monitoring Systems for Gases and Visible Emissions written by John S. Nader and published by . This book was released on 1974 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Quality Assurance Handbook for Air Pollution Measurement Systems written by and published by . This book was released on 1976 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Stationary Source Emissions Determination of the Mass Concentration of Nitrogen Oxides Naphthylethylenediamine Photometric Method written by British Standards Institute Staff and published by . This book was released on 1998-06-15 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion products, Industrial air pollutants, Air pollution, Exhaust gases, Pollutant gases, Chimneys, Gas analysis, Nitrogen oxides, Chemical analysis and testing, Determination of content, Amines (aromatic), Naphthylamine, Photometry (chemical analysis), Flues, Air, Quality, Concentration (chemical), Test equipment, Sampling methods, Test specimens, Specimen preparation, Calibration, Error correction, Performance

Download or read book Workplace Atmospheres General Requirements for the Performance of Procedures for the Measurement of Chemical Agents written by British Standards Institute Staff and published by . This book was released on 2006-09 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environment (working), Air, Chemical analysis and testing, Air pollution, Determination of content, Measurement characteristics, Performance, Precision, Occupational safety, Classification systems, Sampling methods