Download or read book Fatigue and Fracture written by F. C. Campbell and published by ASM International. This book was released on 2012-01-01 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book emphasizes the physical and practical aspects of fatigue and fracture. It covers mechanical properties of materials, differences between ductile and brittle fractures, fracture mechanics, the basics of fatigue, structural joints, high temperature failures, wear, environmentally-induced failures, and steps in the failure analysis process."--publishers website.

Download or read book Fracture of Brittle Disordered Materials Concrete Rock and Ceramics written by G. Baker and published by CRC Press. This book was released on 2004-01-14 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book derives from the invited IUTAM Symposium in September 1993. The contributions discuss recent advances in fracture mechanics studies of concrete, rock, ceramics and other brittle disordered materials at micro and structural levels. It draws together research and new applications in continuum, damage and fracture mechanics approaches.

Download or read book Experimental Rock Deformation The Brittle Field written by M. S. Paterson and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph deals with the part of the field of ex-' perimental rock deformation that is dominated by the phenomena of brittle fracture on one scale or another. Thus a distinction has been drawn between the fields of brittle und ductile behaviour in rock, corresponding more or less to a distinction between the phenomena of fracture and flow. It is hoped eventually to present a survey of the ductile field in a separate volume. The last chapter of this volume deals with the transition between the two fields. The scope of this survey has been limited to the mec.hanical properties of rock viewed as a material on the laboratory scale. Thus, the topic and approach is of a "materials science" kind rather than of a "structures" kind. We are dealing with only one part of the wider field of rock mechanics, which also includes structural or boundary value problems, for example, those of the stability of slopes, the collapse of mine openings, earth quakes, the folding of stratified rock, and the convec tive motion of the earth's mantle. One topic thus ex cluded is the role of jointing, which it is commonly necessary to take into account in applications in engi neering and mining, and probably often in geology too.

Download or read book Mechanism of Brittle Fracture of Rock written by Z. T. Bieniawski and published by . This book was released on 1967 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rock Fractures in Geological Processes written by Agust Gudmundsson and published by Cambridge University Press. This book was released on 2011-04-28 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock fractures control many of Earth's dynamic processes, including plate-boundary development, tectonic earthquakes, volcanic eruptions, and fluid transport in the crust. An understanding of rock fractures is also essential for effective exploitation of natural resources such as ground water, geothermal water, and petroleum. This book combines results from fracture mechanics, materials science, rock mechanics, structural geology, hydrogeology, and fluid mechanics to explore and explain fracture processes and fluid transport in the crust. Basic concepts are developed from first principles and illustrated with worked examples linking models of geological processes to real field observations and measurements. Many additional examples and exercises are provided online, allowing readers to practise formulating and quantitative testing of models. Rock Fractures in Geological Processes is designed for courses at the advanced undergraduate and graduate level but also forms a vital resource for researchers and industry professionals concerned with fractures and fluid transport in the Earth's crust.

Download or read book Brittle Fracture written by and published by . This book was released on 1960 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanics of Brittle Fracture written by Gennadiĭ Petrovich Cherepanov and published by McGraw-Hill International Book Company. This book was released on 1979 with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rock Mechanics for Natural Resources and Infrastructure Development Full Papers written by Sergio A.B. Fontoura and published by CRC Press. This book was released on 2019-09-03 with total page 3791 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Mechanics for Natural Resources and Infrastructure Development contains the proceedings of the 14th ISRM International Congress (ISRM 2019, Foz do Iguaçu, Brazil, 13-19 September 2019). Starting in 1966 in Lisbon, Portugal, the International Society for Rock Mechanics and Rock Engineering (ISRM) holds its Congress every four years. At this 14th occasion, the Congress brings together researchers, professors, engineers and students around contemporary themes relevant to rock mechanics and rock engineering. Rock Mechanics for Natural Resources and Infrastructure Development contains 7 Keynote Lectures and 449 papers in ten chapters, covering topics ranging from fundamental research in rock mechanics, laboratory and experimental field studies, and petroleum, mining and civil engineering applications. Also included are the prestigious ISRM Award Lectures, the Leopold Muller Award Lecture by professor Peter K. Kaiser. and the Manuel Rocha Award Lecture by Dr. Quinghua Lei. Rock Mechanics for Natural Resources and Infrastructure Development is a must-read for academics, engineers and students involved in rock mechanics and engineering. Proceedings in Earth and geosciences - Volume 6 The ‘Proceedings in Earth and geosciences’ series contains proceedings of peer-reviewed international conferences dealing in earth and geosciences. The main topics covered by the series include: geotechnical engineering, underground construction, mining, rock mechanics, soil mechanics and hydrogeology.

Download or read book Fragility Fracture Nursing written by Karen Hertz and published by Springer. This book was released on 2018-06-15 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book aims to provide a comprehensive but practical overview of the knowledge required for the assessment and management of the older adult with or at risk of fragility fracture. It considers this from the perspectives of all of the settings in which this group of patients receive nursing care. Globally, a fragility fracture is estimated to occur every 3 seconds. This amounts to 25 000 fractures per day or 9 million per year. The financial costs are reported to be: 32 billion EUR per year in Europe and 20 billon USD in the United States. As the population of China ages, the cost of hip fracture care there is likely to reach 1.25 billion USD by 2020 and 265 billion by 2050 (International Osteoporosis Foundation 2016). Consequently, the need for nursing for patients with fragility fracture across the world is immense. Fragility fracture is one of the foremost challenges for health care providers, and the impact of each one of those expected 9 million hip fractures is significant pain, disability, reduced quality of life, loss of independence and decreased life expectancy. There is a need for coordinated, multi-disciplinary models of care for secondary fracture prevention based on the increasing evidence that such models make a difference. There is also a need to promote and facilitate high quality, evidence-based effective care to those who suffer a fragility fracture with a focus on the best outcomes for recovery, rehabilitation and secondary prevention of further fracture. The care community has to understand better the experience of fragility fracture from the perspective of the patient so that direct improvements in care can be based on the perspectives of the users. This book supports these needs by providing a comprehensive approach to nursing practice in fragility fracture care.

Download or read book Dislocation Mechanics of Metal Plasticity and Fracturing written by Ronald W. Armstrong and published by MDPI. This book was released on 2020-11-03 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: The modern understanding of metal plasticity and fracturing began about 100 years ago, with pioneering work; first, on crack-induced fracturing by Griffith and, second, with the invention of dislocation-enhanced crystal plasticity by Taylor, Orowan and Polanyi. The modern counterparts are fracture mechanics, as invented by Irwin, and dislocation mechanics, as initiated in pioneering work by Cottrell. No less important was the breakthrough development of optical characterization of sectioned polycrystalline metal microstructures started by Sorby in the late 19th century and leading eventually to modern optical, x-ray and electron microscopy methods for assessments of crystal fracture surfaces, via fractography, and particularly of x-ray and electron microscopy techniques applied to quantitative characterizations of internal dislocation behaviors. A major current effort is to match computational simulations of metal deformation/fracturing behaviors with experimental measurements made over extended ranges of microstructures and over varying external conditions of stress-state, temperature and loading rate. The relation of such simulations to the development of constitutive equations for a hoped-for predictive description of material deformation/fracturing behaviors is an active topic of research. The present collection of articles provides a broad sampling of research accomplishments on the two subjects.

Download or read book Rock Mechanics written by Leopold Müller and published by Springer Science & Business Media. This book was released on 1982-02-01 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much of the research on fracture of rocks or rock-like materials conducted over the past two decades may be considered as "academic studies" of the general phenomenon of fracture. Yet, the understanding of this phenomenon is fundamental if a material is used in any engineering design, whether the aim is to prevent failure of the structure or to promote it. Fracture theories existing are generally empirical and derived from experimental results of laboratory test with simple boundary conditions. Because of the basic weakness of rock intension and because in general the environmental stresses in rock mechanics are compressive most of these theories consider fracture under compressive stress conditions. The Coulomb-Navier-, the Mohr-, the Griffith and the McClintock and Walsh criteria are typical examples and will be considered in the following. In addition the tendency during the past was in making accurate experiments under conditions of homogeneous stresses. To obtain information about the fracture behaviour with unequal principal stresses systems have to be used which involve inhomogeneous stresses. This case is of particular interest, since in practical rock mechanics we may expect conditions of highly inhomogeneous stresses. However, a consideration of such situations involve additional assumptions like the applicability of the theory of elasticity for calculating the stress field, which may be open to question. A distinction has to be made between fracture initiation and fracture propagation, since a detailed observation of the total fracture process in rock was possible by means of "stiff" and "servo-controlled" loading systems.

Download or read book Hydraulic fracturing and geothermal energy written by S. Nemat-Nassar and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic fracturing has been and continues to be a major techno logical tool in oil and gas recovery, nuclear and other waste disposal, mining and particularly in-situ coal gasification, and, more recently, in geothermal heat recovery, particularly extracting heat from hot dry rock masses. The understanding of the fracture process under the ac tion of pressurized fluid at various temperatures is of fundamental scientific importance, which requires an adequate description of thermomechanical properties of subsurface rock, fluid-solid interaction effects, as well as degradation of the host rock due to temperature gradients introduced by heat extraction. Considerable progress has been made over the past several years in laboratory experiments, analytical and numerical modeling, and in-situ field studies in various aspects of hydraulic fracturing and geothermal energy extraction, by researchers in the United States and Japan and also elsewhere. However, the results have been scattered throughout the literature. Therefore, the time seemed ripe for bringing together selected researchers from the two countries, as well as observers from other countries, in order to survey the state of the art, exchange scientific information, and establish closer collaboration for further, better coordinated scientific effort in this important area of research and exploration.

Download or read book Modelling Rock Fracturing Processes written by Baotang Shen and published by Springer Science & Business Media. This book was released on 2013-10-07 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text book provides the theoretical background of rock fracture mechanics and displacement discontinuity methods used for the modelling of geomechanical problems. The computer program FRACOD is used to analyse the fracture problems, assessing fracture initiation and propagation in tension (Mode I), shear (Mode II) and mixed mode I and II of solid intact or jointed geomaterials. The book also presents the fundamentals of thermo-mechanical coupling and hydro-mechanical coupling. Formulations of multiple regional mechanical, thermal and hydraulic functions, which allow analyses of fracture mechanics problems for structures made of brittle, rock-like materials, are provided. In addition, instructive examples of code verification and applications are presented. Additional material: The 2-D version of the FRACOD program, a manual on the program and a wealth of verification examples of classical problems in physics, mechanics and hydromechanics are available at http://extras.springer.com. A large number of applications related to civil, mining, petroleum and environmental engineering are also included. - The first textbook available on modelling of rock fracture propagation - Introduces readers to the fundamentals of rock fracturing - Uses a modern style of teaching with theory, mathematical modelling and applications in one package - The basic version of the FRACOD software, manual, verification examples and applications are available as additional material - The FRACOD program and manual enable the readers to solve fracture propagation problems on their own --------------------------- Ki-Bok Min, Department of Energy Resources Engineering, College of Engineering, Seoul National University, Korea “Challenging rock engineering applications require extreme conditions of stress, temperature and hydraulic pressure resulting in rock fracturing to a various extent. The FRACOD is one of few computer codes available in engineering rock mechanics that can simulate the initiation and propagation of fractures often interacting with natural fractures. Its capability has been significantly enhanced to include the hydraulic and thermal fracturing with concerted interaction from multi-national research and industry partners. My experience with the FRACOD is very positive and I am certain that its already-excellent track record will expand further in the future."

Download or read book The Mechanics of Earthquakes and Faulting written by Christopher H. Scholz and published by Cambridge University Press. This book was released on 2002-05-02 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our understanding of earthquakes and faulting processes has developed significantly since publication of the successful first edition of this book in 1990. This revised edition, first published in 2002, was therefore thoroughly up-dated whilst maintaining and developing the two major themes of the first edition. The first of these themes is the connection between fault and earthquake mechanics, including fault scaling laws, the nature of fault populations, and how these result from the processes of fault growth and interaction. The second major theme is the central role of the rate-state friction laws in earthquake mechanics, which provide a unifying framework within which a wide range of faulting phenomena can be interpreted. With the inclusion of two chapters explaining brittle fracture and rock friction from first principles, this book is written at a level which will appeal to graduate students and research scientists in the fields of seismology, physics, geology, geodesy and rock mechanics.

Download or read book Fractography and Failure Analysis written by Jorge Luis González-Velázquez and published by Springer. This book was released on 2018-03-19 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents fractography and failure analysis at a level that is accessible for non-expert readers, without losing scientific rigor. It offers a comprehensive description of fracture surfaces in engineering materials, with an emphasis on metals, and of the methodology for the observation of fracture surfaces. It also discusses in detail the main fracture mechanisms and their corresponding fracture surfaces, including brittle, ductile, fatigue, and environmental fractures. The last chapter is dedicated to the use of fractography in determining of the causes component failure. In modern engineering, the analysis of fractured components is a common practice in many fields, such as integrity management systems, materials science research, and failure investigations. As such this book is useful for engineers, scientists, engineering students, loss adjuster surveyors and any professional dealing with fractured components.

Download or read book The Initiation Propagation and Arrest of Joints and Other Fractures written by John W. Cosgrove and published by Geological Society of London. This book was released on 2004 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a state of the art look at our understanding of joint development in the crust. Answers are provided for such questions as the mechanisms by which joints are initiated, the factors controlling the path they follow during the propagation process, and the processes responsible for the arrest of joints. Many of the answers to these questions can be inferred from the geometry of joint surface morphology and joint patterns. Joints are a record of the orientation of stress at the time of propagation and as such they are also useful records of ancient stress fields, regional and local. Because outcrop and subsurface views of joints are limited, statistical techniques are required to characterize joints and joint sets. Finally, joints are subject to post-propagation stresses that further localize deformation and are the focus for the development of new structures.

Download or read book Quasibrittle Fracture Mechanics and Size Effect written by Jia-Liang Le and published by Oxford University Press. This book was released on 2021-11-19 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many modern engineering structures are composed of brittle heterogenous, or quasibrittle, materials. These include concrete, composites, tough ceramics, rocks, cold asphalt mixtures, and many brittle materials at the microscale. Understanding the failure behavior of these materials is of paramount importance for improving the resilience and sustainability of various engineering structures including civil infrastructure, aircraft, ships, military armors, and microelectronic devices. Designed for graduate and upper-level undergraduate university courses, this textbook provides a comprehensive treatment of quasibrittle fracture mechanics. It includes a concise but rigorous examination of linear elastic fracture mechanics, which is the foundation of all fracture mechanics. It also covers the fundamental concepts of nonlinear fracture mechanics, and introduces more advanced concepts such as triaxial stress state in the fracture process zone, nonlocal continuum models, and discrete computational models. Finally, the book features extensive discussion of the various practical applications of quasibrittle fracture mechanics across different structures and engineering disciplines, and throughout includes exercises and problems for students to test their understanding.