Download or read book Design and Construction of Bridge Approaches written by Harvey E. Wahls and published by Transportation Research Board. This book was released on 1990 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes case histories of the Dumbarton Bridge (San Francisco Bay, Calif.), the Rainier Avenue Embankment (Seattle, Wash.) and the Gallows Road Grade Separation (Fairfax, Va.)
Download or read book Settlement of Bridge Approaches written by J.-L. Briaud and published by . This book was released on 1997 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: This synthesis will be of interest to state Departments of Transportation (DOTs) geotechnical, structural, roadway design, construction, and maintenance engineers; DOT research staff; and personnel in local transportation agencies. This synthesis describes the current state of the practice for the design, construction, and maintenance of bridge approaches to reduce, eliminate, or compensate for settlement at the bridge/abutment/embankment interface or the bump at the end of the bridge. It discusses the geotechnical and structural engineering design and procedural factors to reduce the bump at the end of the bridge, and includes numerous illustrations. This report of the Transportation Research Board presents data obtained from a review of the literature and a survey of the state DOTs. It is a supplemental update to Synthesis of Highway Practice 159: Design and Construction of Bridge Approaches (1990). The synthesis identifies and describes techniques that have been used to alleviate the problem of the bump at the end of the bridge including the location and cause of settlement and methods used to reduce settlement. In addition, the types of interaction between various divisions of the DOTs in the design, construction, and maintenance of bridge approaches are addressed.
Download or read book Design of Slabs on ground written by ACI Committee 360 and published by American Concrete Institute. This book was released on 2006 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Soil Mechanics with ABAQUS Applications written by Sam Helwany and published by John Wiley & Sons. This book was released on 2007-03-16 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: A simplified approach to applying the Finite Element Method to geotechnical problems Predicting soil behavior by constitutive equations that are based on experimental findings and embodied in numerical methods, such as the finite element method, is a significant aspect of soil mechanics. Engineers are able to solve a wide range of geotechnical engineering problems, especially inherently complex ones that resist traditional analysis. Applied Soil Mechanics with ABAQUS® Applications provides civil engineering students and practitioners with a simple, basic introduction to applying the finite element method to soil mechanics problems. Accessible to someone with little background in soil mechanics and finite element analysis, Applied Soil Mechanics with ABAQUS® Applications explains the basic concepts of soil mechanics and then prepares the reader for solving geotechnical engineering problems using both traditional engineering solutions and the more versatile, finite element solutions. Topics covered include: Properties of Soil Elasticity and Plasticity Stresses in Soil Consolidation Shear Strength of Soil Shallow Foundations Lateral Earth Pressure and Retaining Walls Piles and Pile Groups Seepage Taking a unique approach, the author describes the general soil mechanics for each topic, shows traditional applications of these principles with longhand solutions, and then presents finite element solutions for the same applications, comparing both. The book is prepared with ABAQUS® software applications to enable a range of readers to experiment firsthand with the principles described in the book (the software application files are available under "student resources" at www.wiley.com/college/helwany). By presenting both the traditional solutions alongside the FEM solutions, Applied Soil Mechanics with ABAQUS® Applications is an ideal introduction to traditional soil mechanics and a guide to alternative solutions and emergent methods. Dr. Helwany also has an online course based on the book available at www.geomilwaukee.com.
Download or read book Guide Specifications for Seismic Isolation Design written by and published by AASHTO. This book was released on 2010 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition is based on the work of NCHRP project 20-7, task 262 and updates the 2nd (1999) edition -- P. ix.
Download or read book AASHTO Guide Specifications for LRFD Seismic Bridge Design written by and published by AASHTO. This book was released on 2011 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work offers guidance on bridge design for extreme events induced by human beings. This document provides the designer with information on the response of concrete bridge columns subjected to blast loads as well as blast-resistant design and detailing guidelines and analytical models of blast load distribution. The content of this guideline should be considered in situations where resisting blast loads is deemed warranted by the owner or designer.
Download or read book LRFD Guide Specifications for the Design of Pedestrian Bridges written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 2009 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bridge Deck Analysis written by Eugene J. Obrien and published by CRC Press. This book was released on 2014-10-06 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Captures Current Developments in Bridge Design and MaintenanceRecent research in bridge design and maintenance has focused on the serviceability problems of older bridges with aging joints. The favored solution of integral construction and design has produced bridges with fewer joints and bearings that require less maintenance and deliver increased
Download or read book The Deep Mixing Method written by Masaki Kitazume and published by CRC Press. This book was released on 2013-02-21 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Deep Mixing Method (DMM), a deep in-situ soil stabilization technique using cement and/or lime as a stabilizing agent, was developed in Japan and in the Nordic countries independently in the 1970s. Numerous research efforts have been made in these areas investigating properties of treated soil, behavior of DMM improved ground under static and d
Download or read book Highway Bridge Superstructure Engineering written by Narendra Taly and published by CRC Press. This book was released on 2014-11-21 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt: A How-To Guide for Bridge Engineers and Designers Highway Bridge Superstructure Engineering: LRFD Approaches to Design and Analysis provides a detailed discussion of traditional structural design perspectives, and serves as a state-of-the-art resource on the latest design and analysis of highway bridge superstructures. This book is applicable to highway bridges of all construction and material types, and is based on the load and resistance factor design (LRFD) philosophy. It discusses the theory of probability (with an explanation leading to the calibration process and reliability), and includes fully solved design examples of steel, reinforced and prestressed concrete bridge superstructures. It also contains step-by-step calculations for determining the distribution factors for several different types of bridge superstructures (which form the basis of load and resistance design specifications) and can be found in the AASHTO LRFD Bridge Design Specifications. Fully Realize the Basis and Significance of LRFD Specifications Divided into six chapters, this instructive text: Introduces bridge engineering as a discipline of structural design Describes numerous types of highway bridge superstructures systems Presents a detailed discussion of various types of loads that act on bridge superstructures and substructures Discusses the methods of analyses of highway bridge superstructures Includes a detailed discussion of reinforced and prestressed concrete bridges, and slab-steel girder bridges Highway Bridge Superstructure Engineering: LRFD Approaches to Design and Analysis can be used for teaching highway bridge design courses to undergraduate- and graduate-level classes, and as an excellent resource for practicing engineers.
Download or read book Bridge Engineering Handbook written by Wai-Fah Chen and published by CRC Press. This book was released on 2019-09-11 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 1999: The Bridge Engineering Handbook is a unique, comprehensive, and state-of-the-art reference work and resource book covering the major areas of bridge engineering with the theme "bridge to the 21st century."
Download or read book Foundation Analysis and Design written by Joseph E. Bowles and published by . This book was released on 1997 with total page 1175 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revision of this best-selling text for a junior/senior course in Foundation Analysis and Design now includes an IBM computer disk containing 16 compiled programs together with the data sets used to produce the output sheets, as well as new material on sloping ground, pile and pile group analysis, and procedures for an improved anlysis of lateral piles. Bearing capacity analysis has been substantially revised for footings with horizontal as well as vertical loads. Footing design for overturning now incorporates the use of the same uniform linear pressure concept used in ascertaining the bearing capacity. Increased emphasis is placed on geotextiles for retaining walls and soil nailing.
Download or read book Bridge Engineering written by W.F. Chen and published by CRC Press. This book was released on 2003-02-27 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mitigating the effects of earthquakes is crucial to bridge design. With chapters culled from the best-selling Bridge Engineering Handbook, this volume sets forth the principles and applications of seismic design, from the necessary geotechnical and dynamic analysis background to seismic isolation and energy dissipation, active control, and retrofit
Download or read book Timber Bridges written by Michael A. Ritter and published by Datamotion Publishing LLC. This book was released on 1990 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a comprehensive analysis of the design, construction, inspection, and maintenance of timber bridges.
Download or read book Pavement Analysis and Design written by Yang Hsien Huang and published by . This book was released on 2004 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: For one/two-semester, undergraduate/graduate courses in Pavement Design. This up-to-date text covers both theoretical and practical aspects of pavement analysis and design. It includes some of the latest developments in the field, and some very useful computer software-developed by the author-with detailed instructions.
Download or read book Geotechnical Engineering for Transportation Projects written by American Society of Civil Engineers. Geo-Institute and published by . This book was released on 2004 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: GSP 126 contains 223 papers presented at Geo-Trans 2004, held in Los Angeles, California, July 27-31, 2004.
Download or read book Integral bridges written by George England and published by Thomas Telford Limited. This book was released on 2000-02-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integral Bridges was commissioned by the Highways Agency to produce guidance for bridge designers by addressing the thermally induced soil/structure interaction problem created by environmental changes of temperature and the associated cyclical displacements imposed on the granular backfill to the bridge abutments.
